The punctured droplet electrode – A new three-phase electrode with well defined geometry

A new three-phase electrode allows detailed studies on well-defined three-phase junctions. It consists of a nitrobenzene drop of well controlled size. The drop is dispensed from a capillary and is punctured with a microcylinder electrode. The organic liquid contains an electroactive compound (decamethylferrocene) and, importantly, no supporting electrolyte. The aqueous phase may contain various salts. Well-defined and reproducible linear-scan and square-wave voltammograms and chronoamperograms of oxidation of decamethylferrocene were obtained. The dependence of the formal potential determined from the square-wave voltammograms of decamethylferrocene versus the standard potential of transfer of anions present in the aqueous phase was almost perfectly linear. The developed approach allows the formation of two or more three-phase boundaries within one small drop. Since the drop is well exposed, this electrode geometry also gives a potential possibility of optical/spectrophotometric inspection of the reaction products in the organic phase and of examination of the reaction-layer growth.     

Electroactive ceramic carbon electrode impregnated with organic liquid

The carbon ceramic electrodes impregnated with hydrophobic organic solvent (toluene, hexadecane, nitrobenzene) containing redox probe (decamethylferrocene) were prepared. The electrode material was obtained by sol–gel process. It consists of graphite powder homogeneously dispersed in hydrophobic silica matrix. After gelation and drying it was filled with organic liquid. The electrochemical properties of the electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Approximately symmetric cyclic voltammograms were obtained with these electrodes immersed in aqueous electrolyte solution. Their shape and current magnitude and position on the potential scale depends on the organic solvent and the salt present in aqueous phase. It has been concluded that the mechanism of the electrode process involves electron transfer between graphite particle and the redox probe in organic phase, followed by anion transfer from the aqueous phase.     

Cyclic voltammetry of highly hydrophilic ions at a supported liquid membrane

Cyclic voltammetry has been used to study the coupling of ion transfer reactions at a liquid membrane. The liquids are either supported by a porous hydrophobic membrane (polyvinylidene difluoride, PVDF) when the organic solvent is non-volatile (o-nitrophenyloctylether) or are merely a free standing organic solvent layer such as 1,2-dichloroethane comprised between two hydrophilic dialysis membranes supporting the adjacent aqueous phases. The passage of current across the liquid membrane is associated with two ion transfer reactions across the two polarised liquid liquid interfaces in series. It is shown that it is possible to study the transfer of highly hydrophilic ions at one interface by limiting the mass transfer of the other ion transfer reaction at the other interface. Indeed, for systems comprising an ion M in one aqueous phase and a reference ion R partitioned between the membrane and the other aqueous phase, the observed and simulated cyclic voltammograms have a half-wave potential determined by the Gibbs energy of transfer of M transferring at one interface and by the limiting mass transfer of R at the other interface. This new methodology opens a way to measure the Gibbs energy of transfer of highly hydrophilic or hydrophobic ions, which usually limits the potential window at single liquid liquid interfaces (ITIES).     

Ion-transfer- and photo-electrochemistry at liquid|liquid|solid electrode triple phase boundary junctions: perspectives

Ion transfer at liquid|liquid junctions is one of the most fundamental processes in nature. It occurs coupled to simultaneous electron transfer at the line junction (or triple phase boundary) formed by the two liquids in contact to an electrode surface. The triple phase boundary can be assembled from a redox active microdroplet deposit of a water-immiscible liquid on a suitable electrode surface immersed into aqueous electrolyte. Ion transfer voltammetry measurements at this type of electrode allow both thermodynamic and kinetic parameters for coupled ion and electron transfer processes to be obtained. This overview summarises some recent advances in understanding and application of triple phase boundary redox processes at organic liquid|aqueous electrolyte|working electrode junctions. The design of novel types of electrodes is considered based on (i) extended triple phase boundaries, (ii) porous membrane processes, (iii) hydrodynamic effects, and (iv) generator-collector triple phase boundary systems. Novel facilitated ion transfer processes and photo-electrochemical processes at triple phase boundary electrodes are proposed. Potential future applications of triple phase boundary redox systems in electrosynthesis, sensing, and light energy harvesting are indicated.     

Scanning electrochemical microscopy study of ion transfer process across water/2-nitrophenyloctylether interface supported by hydrophobic carbon ceramic electrode

A carbon ceramic electrode (CCE) modified with the redox probe—decamethylferrocene solution in hydrophobic organic solvent—2-nitrophenyloctyl ether and immersed into an aqueous solution was studied by scanning electrochemical microscopy (SECM). After the electrochemical oxidation of decamethylferrocene, its cations were detected near the electrode surface in the aqueous phase. This indicates that some fraction of the redox-active cations electrochemically produced in the organic phase is transferred across the liquid/liquid interface. They are reduced at the SECM tip and form a solid deposit. The amount of deposited decamethylferrocene was estimated by the anodic reaction at the tip. It is affected by the substrate–tip distance, deposition time, and electrolyte concentration. The SECM images of unmodified and modified CCEs are consistent with their heterogeneous structure.     

Determination of hydrophobicity scale of tetraphenylborate and its derivatives by ferrocene based three-phase electrodes

In three-phase electrodes (TPE), ferrocene (Fc) was often thought to be useless for ion transfer injection because its oxidized form has very low affinity for organic phase. Instead, lipophilic decamethylferrocene (DMFc) was employed as a better probe for the ion transfer study. However, our present results indicate that the commonly-used DMFc based TPE was not applicable for the transfer of strong hydrophobic tetraphenylborate and its derivatives (TPBs); whereas the developed Fc based TPE can meet this special requirement. Taking this advantage, we firstly evaluate the standard ion transfer energies of these TPBs and get a full knowledge of their hydrophobicity scale, which will benefit the related areas such as hydrophobic ionic liquids and lipophilic anion exchangers.     

Catalytic Activity of Alkali Metal Cations for the Chemical Oxygen Reduction Reaction in a Biphasic Liquid System Probed by Scanning Electrochemical Microscopy

Chemical reduction of dioxygen in organic solvents for the production of reactive oxygen species or the concomitant oxidation of organic substrates can be enhanced by the separation of products and educts in biphasic liquid systems. Here, the coupled electron and ion transfer processes is studied as well as reagent fluxes across the liquid|liquid interface for the chemical reduction of dioxygen by decamethylferrocene (DMFc) in a dichloroethane-based organic electrolyte forming an interface with an aqueous electrolyte containing alkali metal ions. This interface is stabilized at the orifice of a pipette, across which a Galvani potential difference is externally applied and precisely adjusted to enforce the transfer of different alkali metal ions from the aqueous to the organic electrolyte. The oxygen reduction is followed by H₂O₂ detection in the aqueous phase close to the interface by a microelectrode of a scanning electrochemical microscope (SECM). The results prove a strong catalytic effect of hydrated alkali metal ions on the formation rate of H₂O₂, which varies systematically with the acidity of the transferred alkali metal ions in the organic phase.     

Aqueous-organic phase transfer of gold nanoparticles and gold nanorods using an ionic liquid

The water-immiscible ionic liquid, [C4MIM][PF6], is a solvent medium that allows complete transfer of gold nanoparticles from an aqueous phase into an organic phase. Both spherical and rod-shaped gold nanoparticles are efficiently transferred from an aqueous solution into the organic phase without requiring the use of thiols. The sizes and shapes of the gold nanoparticles were preserved during the phase-transfer process when a surfactant was added to the ionic liquid. This process offers a simple approach for obtaining solutions of differently sized and shaped gold nanoparticles in ionic liquids.     

Effect of SDBS on interfacial electron transfer at the liquid/liquid interface by thin layer method

The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate(SDBS) on electron transfer(ET) reaction between ferricyanide aqueous solution and decamethylferrocene(DMFc) located on the adjacent organic phase was investigated for the first time by thin layer method.The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase.However,the rate constant of electron transfer(k_(et)) i...     

Electron transfer – ion insertion electrochemistry at an immobilised droplet: probing the three-phase electrode-reaction zone with a Pt disk microelectrode

A four-electrode setup was used to study the following system: a nitrobenzene (NB) drop containing no added supporting electrolyte and either ferrocene or decamethylferrocene was placed on a glassy carbon disk and surrounded by an aqueous solution of supporting electrolyte. The glassy carbon electrode was polarised appropriately to generate either the ferrocenium or the decamethylferrocenium cations. A very thin conical-body Pt microdisk electrode was placed inside the NB drop to detect the product cations. The relation between the time of appearance of the reduction current at the microelectrode and the distance from the three-phase junction indicates that the electrode reaction starts at this junction where both the electron transfer and the ion transfer can take place.     

Quantification of the chiral recognition in electrochemically driven ion transfer across the interface water/chiral liquid

The electrochemically driven transfer of the chiral anions of d- and l-tryptophan across the interface water/chiral liquid (d- or l-menthol) is stereoselective, and it can be used to determine quantitatively the difference in Gibbs energies for the solvation of chiral ions in chiral liquids. The ion transfer can be achieved in a three-phase arrangement where a droplet of the chiral liquid containing decamethylferrocene as the electroactive redox probe is attached to a graphite electrode immersed in the aqueous solution containing the chiral ions.     

Ion‐Transfer Electrochemistry of Rat Amylin at the Water–Organogel Microinterface Array and Its Selective Detection in a Protein Mixture

The behavior of proteins and polypeptides at electrified aqueous–organic interfaces is of benefit in label‐free detection strategies. In this work, rat amylin (or islet amyloid polypeptide) was studied at the interface formed between aqueous liquid and gelled organic phases. Amylin is a polypeptide that is co‐secreted with insulin from islet beta‐cells and is implicated in fibril formation. In this study, rat amylin was used, which does not undergo aggregation. The polypeptide underwent an interfacial transfer process, from water to the gelled organic phase, under applied potential stimulation. Cyclic voltammetry revealed steady‐state forward and peak‐shaped reverse voltammograms, which were consistent with diffusion‐controlled water‐to‐organic transfer and thin‐film stripping or desorptive back‐transfer. The diffusion‐controlled forward current was greater when amylin was present in an acidic aqueous phase than when it was present in an aqueous phase at physiological pH; this reflects the greater charge on the polypeptide under acidic conditions. The amylin transfer current was concentration dependent over the range 2–10 μM , at both acidic and physiological pH. At physiological pH, amylin was selectively detected in the presence of a protein mixture, which illustrated the bioanalytical possibilities for this electrochemical behavior.     

Electrochemical Systems Based on Sol-Gel Silica Matrix Impregnated with Organic Solvent

Two electrochemical systems based on sol-gel silica matrix impregnated with organic solvent were prepared and studied. The first one is composed of tetramethylorthosilicate based material filled with ferrocene solution in polar solvent: propylene carbonate. Electrodes are immersed in this solid electrolyte during all stages of sol-gel process. Despite of the lack of the extra added salt, by using ultramicroelectrode, undistorted electrochemical signal corresponding to the electrooxidation of the ferrocene was obtained. Its diffusion coefficient within the sol-gel matrix depends on the time elapsed after gelation and it is not much below that in salt solution in the same solvent. The second system is based on graphite dispersion in hydrophobic sol-gel silicate matrix. This material was filled with mixture of liquid butylferrocene and hexadecane. After immersion in aqueous salt solution it serves as working electrode. The electrochemical signal corresponding to the electrooxidation of the butylferrocene within organic phase was obtained. Probably the electrode process occurs at three phase (carbon/organic phase/aqueous phase) junction and it is accompanied by anion transfer through the liquid-liquid interface.     

Mesoporous platinum hosts for electrodeliquidliquid – Triple phase boundary redox systems

Mesoporous metal hosts are attractive electrode materials for complex electrode reactions, for example those involving a system of two immiscible liquids. Here we show that a solution of tetraphenylporphyrianto manganese (MnTPP) in 4-(3-phenylpropyl)-pyridine (PPP) organic liquid can be immobilized into mesoporous platinum thin films electrodeposited from a liquid crystalline template. When immersed in an aqueous solution, the organic liquid remains immobilized inside the mesoporous platinum framework. Well-defined, stable, and reproducible ion transfer voltammograms are recorded. The effects of mesoporous platinum membrane thickness (volume), scan rate, and the type of aqueous electrolyte anion (for Cl⁻, , , CN⁻, SCN⁻ and ) are investigated. Mesoporous platinum is proposed as a very effective electrode material for liquidliquid anion sensing and for other applications of electrochemically driven liquidliquid redox systems.     

Control and applications of immiscible liquids in microchannels

Photolithography was used in combination with photocleavable self-assembled monolayers to pattern surface free energies inside microchannels enabling the control of the boundary between immiscible liquids. While aqueous solutions are confined to the hydrophilic pathways by surface forces alone, organic liquids are confined to the hydrophobic region only if the aqueous liquid first occupies the hydrophilic region. In this way, stable liquid boundaries between immiscible liquids are possible as long as the pressures are maintained below critical values. The maximum pressures are determined by the interfacial tension of the aqueous solution and organic liquid, channel depth, and advancing contact angle (theta;(a)). Experimental results on maximum pressures are in good agreement with the analytical values. The ability to confine and position the boundary between immiscible liquids inside microchannels leads to a broad range of applications in microfluidic systems, which is exemplified by fabrication of a semipermeable membrane in a surface-patterned channel via interfacial polymerization.     

Electroneutrality coupling of electron transfer at an electrode surface and ion transfer across the interface between thin-layer of 1-octyl-3-methylimidazolium bis(perfluoroalkylsulfonyl)imide covering the electrode surface and an outer electrolyte solution.

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.     

Electrodeposition of poly(N-vinylcarbazole) at the three-phase junction. Formation of very different polymer structures

Poly(N-vinylcarbazole) films can be deposited at the three-phase boundary when the organic phase contains only monomer, N-vinylcarbazole, while the aqueous phase contains supporting electrolyte. A cylindrical platinum microelectrode is immersed into the two-liquid system in such a way that a part of it is located in one liquid and the other part resides in the second liquid. The thickness of the reaction layer, or the width of the microelectrode zone where the polymer grows, depends on the kind of ions present in the aqueous phase and the time of the experiment. The structure of the deposited polymer may be very different and depends on the distance from the three-phase boundary and the type of the anion present in the aqueous phase. The key parameters here are the local electrode potential and the local concentration of the anions. The list of obtained polymer structures includes, among others, arrays of perfectly arranged deep oval channels and groups of microcrystals. The porosity of the polymer deposits increases with the distance from the aqueous phase.     

Electrochemically driven transfer of carboxyl-terminated PAMAM dendrimers at the water/dichloroethane interface

The transfer of PAMAM dendrimers bearing carboxylic acid peripheral groups between two immiscible liquids was studied by means of the three phase junction system, using a gold wire vertically crossing the interface and decamethyl ferrocene as the redox probe in the organic phase. While the voltammetric behavior indicates kinetic limitations of the overall ion–electron transfer process, thermodynamic data shows that the phase transfer process is entropically controlled. Four dendrimer generations were analyzed and it was found that the kinetics as well as the thermodynamics of the phase transfer reaction are size dependent.     

Electrochemical redox reaction in a silica sol-gel glass with embedded organic electrolyte

The electrochemical redox reaction of ferrocene was studied in silica sol-gel glass with embedded organic electrolyte. This material has been prepared by mixing hydrolysed tetramethylorthosilicate sol with propylene carbonate LiClO₄ solution containing ferrocene and further gelation in a form of block or film. The electrochemical behaviour of encapsulated ferrocene was studied by cyclic voltammetry, chronoamperometry, differential pulse voltammetry and impedance spectroscopy on ultramicroelectrodes. The shape of the cyclic voltammograms corresponding to the electrooxidation of ferrocene in sol-gel block is similar to that obtained in liquid electrolyte and it does not depend on gel aging. The current substantially decreases during the first few days after gelation. Later it becomes weakly dependent on aging and the apparent diffusion coefficient of ferrocene in the gel block is about half of that in liquid electrolyte. The electrooxidation of ferrocene also occurs in film of the analogous sol-gel material cast on the surface of the electrode assembly.     

Electrocatalytic reactions mediated by N,N,N',N'-Tetraalkyl-1,4-phenylenediamine redox liquid microdroplet-modified electrodes: chemical and photochemical reactions In, and At the surface of, femtoliter droplets

The electro-oxidation of electrolytically unsupported ensembles of N,N-diethyl-N',N'-dialkyl-para-phenylenediamine (DEDRPD, R = n-butyl, n-hexyl, and n-heptyl) redox liquid femtoliter volume droplets immobilized on a basal plane pyrolytic graphite electrode is reported in the presence of aqueous electrolytes. Electron transfer at these redox liquid modified electrodes is initiated at the microdroplet-electrode-electrolyte three-phase boundary. Dependent on both the lipophilicity of the redox oil and that of the aqueous electrolyte, ion uptake into or expulsion from the organic deposits is induced electrolytically. In the case of hydrophobic electrolytes, redox-active ionic liquids are synthesized, which are shown to catalyze the oxidation of l-ascorbic acid over the surface of the droplets. In contrast, the photoelectrochemical reduction of the anaesthetic reagent halothane proceeds within the droplet deposits and is mediated by the ionic liquid precursor (the DEDRPD oil).