Electroconductivity and nature of ion transfer in La1 − x Sr x Sc1 − y Mg y O3 − α system (0.01 ≤ x = y ≤ 0.20) in dry and humid air

The conductivity and ion and proton transfer numbers were measured in La_{1 ? x} Sr _x Sc_{1 ? y} Mg _y O_{3 ? α} system (x = y = 0.10–0.20). The partial conductivities (total ion, proton, oxygen, hole) and their effective activation energies were calculated. The measurements were carried out in air with respect to humidity (pH₂O = 0.04?2.65 kPa) within the temperature range from 630 to 920°C.     

Synthesis and properties of fuel cell anodes based on (La0.5 + x Sr0.5 − x )1 − y Mn0.5Ti0.5O3 − δ (x = 0–0.25, y = 0–0.03)

Results are presented of studying electrochemical properties of perovskite-like solid solutions (La_{0.5 + x} Sr_{0.5 ? x} )_{1 ? y} Mn_0.5Ti_0.5O_{3 ? δ} (x = 0–0.25, y = 0–0.03) synthesized using the citrate technique and studied as oxide anodic materials for solid oxide fuel cells (SOFC). X-ray diffraction (XRD) analysis is used to establish that the materials are stable in a wide range of oxygen chemical potential, stable in the presence of 5 ppm H₂S in the range of intermediate temperatures, and also chemically compatible with the solid electrolyte of La_0.8Sr_0.2Ga_0.8Mg_0.15Co_0.05O_{3 ? δ} (LSGMC). It is shown that transition to a reducing atmosphere results in a decrease in electron conductivity that produced a significant effect on the electrochemical activity of porous electrodes. Model cells of planar SOFC on a supporting solid-electrolyte membrane (LSGMC) with anodes based on (La_0.6Sr_0.4)_0.97Mn_0.5Ti_0.5O_{3 ? δ} and (La_0.75Sr_0.25)_0.97Mn_0.5Ti_0.5O_{3 ? δ} and a cathode of Sm_0.5Sr_0.5CoO_{3 ? δ} are manufactured and tested using the voltammetry technique.     

Microdomains in the CaFexMn1−xO3−y ferrites: II. Oxidation and reduction of the x = 0.4 composition

It is shown that in the processes of oxidation, reduction, and annealing of samples of the title, three-dimensional microdomains (3D-μD) play a predominant role. These microdomains are intergrown in the three dimensions and allow compositional variations in a very subtile manner. The existence of microdomains seems to be associated with the presence of tetravalent cations and with the fact that all the structures observed are superstructures of the perovskite cell.     

Synthesis and crystal structure of Mo6−x Nb x I11 (x = 1–1.5)

A solid solution Mo_{6 ? x} Nb _x I₁₁ (x = 1.1–1.5) containing cluster cores {Mo₅NbI₈} is obtained by the high-temperature reaction of molybdenum, niobium, and iodine (550°C, 70 h, quartz ampule). According to the X-ray diffraction data, heating at 800°C in a molybdenum container results in the decomposition of the solution to Mo₆I₁₂ and Nb₆I₁₁. According to the X-ray structure analysis data, the compounds are isostructural to the high-spin modification Nb₆I₁₁ (space group Pccn). The presence of Nb atoms in the structure changes the structural type from the layered (Mo₆I₁₂) to framework structure, noticeably increases the metalmetal distances (2.661–2.716 Å, 2.695 Å) Mo₆ octahedron with the retention of the distance from the metal (M) to the μ₃-“capped” I atoms, and strongly elongates the M₆-I-M₆ bridges almost to the value observed in Nb₆I₁₁.     

Electrochemical study of spinel oxide systems with nominal compositions Ni1− x Cu x Co2O4 and NiCo2− y Cu y O4

Studies on the electrochemical behaviour of Ni_{1− x} Cu _x Co₂O₄ (x ≤ 0.75) and NiCo_{2− y} Cu _y O₄ (y ≤ 0.30) electrodes in 5 mol dm⁻³ KOH aqueous solutions are presented. The oxide layers have been prepared by thermal decomposition of aqueous nitrate solutions on nickel supports at 623 K. Powder samples were also prepared by thermal decomposition under the same conditions. The powder samples and the oxide layers were characterised by X-ray powder diffraction. The influence of the copper content on the voltammetric response of the electrodes and activity towards oxygen evolution reaction is analysed and correlated with the surface composition of the electrodes by means of X-ray photoelectron spectroscopy data. The analysis of the results reveals that the presence of Cu affects the electrode behaviour and its influence depends on which cation has been replaced. Received: 22 February 1999 / Accepted: 26 October 1999     

Ceometries,Energetics and Spectroscopic Properties of Oxygen Clusters Oxy (x=2～6, y=-2～2)

The geometries, energetics and spectroscopic properties of oxygen clusters, Oxy(x=2~6, y=-2~2), were investigated at the B3LYP/6-311G (d, p) level. The CASSCF calculations were carried out for the ground and excited states of3O2and2O2+. The total energy is3O2(3Σg-)<2O2-(2Πgi)<1O2(1Δg)<1O2-2(1Σg+)<2O2+(2Πg)<1O2+2(1Σg+). The relative energy of the active doublet anion of oxygen molecule,2O2-(2Πgi), is only 28 kJ/mol higher than the triplet neutral oxygen molecule,3O2(3Σg-). The calculated O-O vibrational frequencies all are in good agreement with the experimental values. They are 1577 (1580), 1139 (1090), 1563 (1484), 627 (615~545) and 1993 (1905) cm-1, where the O-O vibrational frequency values in parentheses are experimental values, for3O2(3Σg-),2O2-(2Πgi),1O2(1Δg),1O2-2(1Σg+) and2O2+(2Πg), respectively. Moreover, the O-O vibrational frequency of1O2+2(1Σg+) was computed as 2368 cm-1which has not been reported before at both experimental and theoretical levels. Both bent and linear geometries of O3were studied. The bent-types of O3are more favorable than the linear-type in energy. Three types of structure for oxygen trimers are calculated at the B3LYP/6-311G (d, p) level. They are the structure-I with an obtuse angle of O-O-O,the structure-II with an acute angle of O-O-O, and the structure-III of linear type. For a bent-type structure of O3species (structure-I), the total enegy is2O3-(2B1)<1O3(1A1)<3O3(3B2)<1O3-2(1A1)<2O3+(2A1). The optimization of geometry at B3LYP/6-311G (d, p) level indicated that the species of2O3-(2B1) with 1.3573 of O-O bond length and 115.6584o of O-O-O bond anger is the ground state of O3. The total energy of O4species and their ions is2O4-(Cs,2A′, bend-type)<2O4-(C2v,2A2,face-centered triangle-type)<2O4-(D∞h,2Σg, linear-type)<1O4(Cs,1A′, bend-type)<1O4(D∞h,1Σg, linear-type)<1O4(D4h,1A1g, square-type)<1O4(C2v,1A1, face-centered triangle-type)<2O4-(D4h,1A1g, square-type)<2O4+(D∞h,2Σg, linear-type)<2O4+(Cs,1A′, bend-type). The species with the lowest relative energy is an anion,2O4-(Cs,2A′, bendtype), with chair form geometry and characteristic vibronic frequencies of 1179 and 1349 cm-1. The relative energy of1O5(C2v,1A1) with coplanar-triangle-bicone geometry is the lowest among the O5species and their ions, which may be a resonance structure with1O5(C2v,1A1) of A type. Their characteristic vibronic frequency is 1302 cm-1. The relative energy of the O6species and their ions with hexagon geometry is lower than one with linear geometry. Their infrared vi-bronic intensity may be weak and unobservable but the Raman vibronic intensity may be strong and observable based on their symmetry.     

Rubidium-cationic conductivity of Rb2−2x Ga2−x A x O4 (A = P, V, Nb, Ta) solid electrolytes

Solid solutions based on rubidium monogallate RbGaO₂ with a general formula Rb_2?2x Ga_2?x A _x O₄ (A = P, V, Nb, and Ta) are synthesized. Their crystal structure and temperature and concentration dependences of conductivity are studied. The highest rubidium-cationic conductivity is (1.8–3.9) × 10^?3 S cm^?1 at 400°C and (1.4–2.1) × 10^?2 S cm^?1 at 700°C. These results are compared with the data for rubidium monogallate doped with four-charged cations and solid solutions based on RbAlO₂.     

Preparation and properties of highly conductive La1−x M x MnO3−y thin film showing magnetic effect from sol-gel process

The sol-gel synthesis of Sr-doped-LaMnO₃ thin film was investigated. The optimum condition was obtained when strontium, lanthanum and manganese nitrates were used as raw materials and diethylene or propylene glycol was used as solvent. An alumina plate was used as a substrate. The film thickness was about 0.2 m for one dip coating. The conductivity of Sr-substituted-LaMnO₃ increased with increasing Sr content and showed ferromagnetic properties. The conduction mechanism was a hopping conduction due to the small polaron. The metal-semiconductor transition at around room temperature was considered to be caused by the Jahn-Teller effect.     

Defects in doped perovskite-like lanthanum cobaltite crystals La1−x SrxCo1−y MeyO3−δ (Me = Cu and Mn)

The paper presents a thermodynamic analysis of the formation of equilibrium defects in perovskitelike La_1?x Sr_xCo_1?y Me_yO_3?δ oxides, where Me = Cu or Mn, x = 0.0 or 0.3, and y = 0.0, 0.25, or 0.3, at high temperatures (873 K ≤ T ≤ 1373 K) depending on the composition and oxygen pressure (10^?8 atm ≤ $p_{O_2 } $ ≤ 1 atm). The results were used to study the nature of charge transfer. Small-radius polarons were shown to be responsible for the electric properties of the cobaltites under consideration; their concentrations and mobilities were calculated.     

Influence of Ca2+ substitution on thermal,structural, and conductivity behavior of Bi1−xCaxFeO3−y (0.40 ≤ x ≤ 0.55)

Bi_1?xCa_xFeO_3?y (0.40 ≤ x ≤ 0.55) perovskite oxides have been synthesized by solid-state reaction method to study their properties as a cathode material for intermediate temperature solid oxide fuel cells. The as prepared samples were characterized by X-ray diffraction, differential thermal analyzer/thermogravimetry, dilatometer, and impedance spectroscopy to study their structural, thermal, and electrical properties. The Rietveld refinement results confirmed that all the samples exhibit tetragonal structure with P4mm space group. In addition to this, sample x = 0.55 exhibits Ca₂Fe₂O₅ as a secondary phase. It has been observed that lattice parameters decrease with increase in calcium content. The thermal expansion coefficient and ionic conductivity increases with increase in calcium content up to x = 0.50. The highest ionic conductivity is observed for Bi_0.5Ca_0.5FeO_3?y i.e. 1.71 × 10^?2 S cm^?1.     

Synthesis and electrical properties of variable-composition phases Rb1 − x A1 − x R1 + x (MoO4)3 (0 ≤ x ≤ 0.2; A = Mg, Mn, Co, Ni; R = Sc, Yb, Lu)

Subsolidus region of the ternary systems Rb₂MoO₄-AMoO₄-R₂(MoO₄)₃, in which variable-composition phases Rb_{1 ? x} A_{1 ? x} R_{1 + x} (MoO₄)₃ crystallizing in the monoclinic system (space group C2) are formed, was studied. Their crystallographic parameters were calculated; temperature dependences of the electrical conductivity, dielectric constant, and dielectric loss tangent were analized.     

Electrocrystallization of PrO2 and TbO2−x from alkali hydroxide melts and characterization of the fluorite-related TbO2−x

Single crystals of PrO₂ and of the oxygen deficient fluorite related phase TbO_2−x have been obtained by anodic electrocrystallization from alkaline hydroxide melts containing PrCl₃ and TbCl₃, respectively. Magnetic measurements, X-ray diffraction data and TEM investigations confirm the identity of the products. PrO₂ crystallizes in a fluorite type of structure with a=5.3945(3) Å and shows paramagnetic behaviour with a magnetic moment as expected for Pr⁴⁺ (μ_eff=2.49μ_B, Θ=−109 K, T_N=10 K). According to precession photographs and an examination with an area sensitive X-ray detector, TbO_2−x exhibits a superstructure of fluorite with a pseudocubic subcell with a_f=5.2810(1) Å. This lattice constant is intermediate between those of TbO₂ and Tb₂O₃ (C-type), the same is true for its paramagnetic behaviour (μ_eff=8.58μ_B, Θ=−22 K, T_N=5 K). The supercell was found to be hexagonal with a=25.836(1) Å and c=36.672(2) Å, the symmetry of the intensity distribution being monoclinic. Electron diffraction revealed a cubic cell with a=10.6 Å, space group Ia-3, indicating reduction of the material in the electron beam.     

The electronic structure and properties of Ni1−xLixO1−y (0⩽x⩽1/4, 0⩽y⩽1/8)

The electronic structures of NiO, Ni_0.875O, NiO_0.875, Ni_0.875Li_0.125O, Ni_0.875Li_0.125O_0.875 and Ni_0.75Li_0.25O_0.875 with a NaCl-type crystal structure have been calculated using the ab initio linear muffin-tin orbitals method in the LSDA+U approximation. The effect of vacancies in the metal and metalloid sublattices and lithium ions on parameters of the NiO electronic spectrum (the energy gap and the valence band widths, etc.) has been analyzed. It is shown that the defects like the dipole LiV_O and the tripole LiV_OLi impaired stability and could reduce electrical conductivity of the nickel–oxide-based phases.     

An atom-in-molecules and electron-localization-function study of the interaction between O2 and VxOy+/VxOy (x = 1, 2, y = 1–5) clusters

 The most stable structures of V _x O _y ⁺/V _x O _y (x=1, 2, y=1–5) clusters and their interaction with O₂ are determined by density functional calculations, the B3LYP functional with the 6-31G* basis set. The nature of the bonding of these clusters and the interaction with O₂ have been studied by topological analysis in the framework of both the atoms-in-molecules theory of Bader and the Becke–Edgecombe electron localization function. Bond critical points are localized by means of the analysis of the electron density gradient field, ∇ρ(r), and the electron localization function gradient field, ∇η(r). The values of the electron density properties, i.e., electron density, ρ(r), Laplacian of the electron density, ∇²ρ(r), and electron localization function, η(r), allow the nature of the bonds to be characterized, and linear correlation is found for the results obtained in both gradient fields. Vanadium-oxygen interactions are characterized as unshared-electron interactions, and linear correlation is observed between the electron density properties and the V–O bond length. In contrast, O₂ units involve typical shared-electron interactions, as for the dioxygen molecule. Four different vanadium–oxygen interactions are found and characterized: a molecular O₂ interaction, a peroxo O₂ ²⁻ interaction, a superoxo O₂ ⁻ interaction and a side-on O₂ ⁻ interaction. Received: 15 October 2001 / Accepted: 30 January 2002 / Published online: 24 June 2002     

Multivariate analysis of melting points for homologous series C x H2x − 1NO (x = 3−6)

A multivariate analysis of the empirical structure data for isomeric homologues using principal-component analysis has been carried out, and the correlation with experimental melting points has been shown. Based on the data on the CSD structure, we discuss the impact of molecular H-aggregation.     

Novel red-emitting phosphors, (Mg(1−x−y)MnxDyy)Al2Si2O8 and (Mg(1−x−y)MnxTmy)Al2Si2O8

Mn⁴⁺ doped and Dy³⁺, Tm³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the ²E → ⁴A₂ transitions of Mn⁴⁺.