Apparent molar volumes and apparent molar heat capacities of aqueous barium nitrate at temperatures from (278.15 to 393.15) K and at the pressure 0.35 MPa

Apparent molar volumes V_φ and apparent molar heat capacities C_p,φ were determined for aqueous solutions of barium nitrate Ba(NO₃)₂ at molalities m=(0.0025 to 0.2) mol · kg⁻¹, at T=(278.15 to 393.15) K, and at the pressure 0.35 MPa. Our V_φ values were calculated from densities obtained using a vibrating-tube densimeter, and our C_p,φ values were obtained using a twin fixed-cell, power-compensation, differential-output, temperature-scanning calorimeter. Our results were fitted to functions of m and T and compared with values from the literature.     

Apparent molar volumes and apparent molar heat capacities of aqueous solutions of isomeric butanols at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

Apparent molar heat capacities C_{p, φ}and apparent molar volumesV_φ were determined for aqueous solutions of 1-butanol, 2-butanol (both R andS isomers), isobutanol (2-methyl-1-propanol), and t -butanol (2-methyl-2-propanol) at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa. The molalities investigated ranged from 0.02 mol · kg ^− 1to 0.5 mol · kg ^− 1. We used a vibrating-tube densimeter (DMA 512P, Anton Paar, Austria) to determine the densities and volumetric properties. Heat capacities were obtained using a twin fixed-cell, power-compensation, differential-output, temperature-scanning calorimeter (NanoDSC 6100, Calorimetry Sciences Corporation, Provo, UT, U.S.A.). The results were fit by regression to equations that describe the surfaces (V_φ, T, m) and (C_p,φ, T, m). Infinite dilution partial molar volumesV₂^o and heat capacities C_p,2^owere obtained over the range of temperatures by extrapolation of these surfaces to m =  0.     

Apparent molar volumes and apparent molar heat capacities of aqueous magnesium nitrate,strontium nitrate,and manganese nitrate at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

Apparent molar volumes V_ϕ and apparent molar heat capacities C_p,ϕ were determined at the pressure 0.35 MPa for aqueous solutions of magnesium nitrate Mg(NO₃)₂ at molalities m = (0.02 to 1.0) mol · kg⁻¹, strontium nitrate Sr(NO₃)₂ at m = (0.05 to 3.0) mol · kg⁻¹, and manganese nitrate Mn(NO₃)₂ at m = (0.01 to 0.5) mol · kg⁻¹. Our V_ϕ values were calculated from solution densities obtained at T = (278.15 to 368.15) K using a vibrating-tube densimeter, and our C_p,ϕ values were calculated from solution heat capacities obtained at T = (278.15 to 393.15) K using a twin fixed-cell, differential, temperature-scanning calorimeter. Empirical functions of m and T were fitted to our results, and standard state partial molar volumes and heat capacities were obtained over the ranges of T investigated.     

Apparent molar volumes and apparent molar heat capacities of aqueous solutions ofN,N- dimethylformamide andN,N- dimethylacetamide at temperatures from 278.15 to 393.15 K and at the pressure 0.35 MPa

Apparent molar heat capacities C_{p, φ}and apparent molar volumesV_φ were determined for aqueous solutions of N, N - dimethylformamide andN , N - dimethylacetamide at temperatures from 278.15 to 393.15 K and at the pressure 0.35 MPa. The molalities investigated ranged from 0.015 mol ·kg ^− 1to 1.0 mol · kg ^− 1. We used a vibrating-tube densimeter (DMA 512P, Anton PAAR, Austria) to determine the densities and volumetric properties. Heat capacities were obtained using a twin fixed-cell, power-compensation, differential-output, temperature-scanning calorimeter (NanoDSC 6100, Calorimetry Sciences Corporation, Spanish Fork, UT, U.S.A.). The results were fit by regression to equations that describe the surfaces (V_φ,T , m) and (C_{p, φ}, T, m). Infinite dilution partial molar volumes V₂^oand heat capacitiesC_p,2^o were obtained over the range of temperatures by extrapolation of these surfaces to m =  0.     

Apparent molar volumes and apparent molar heat capacities of aqueous tetrahydrofuran,dimethyl sulfoxide, 1,4-dioxane,and 1,2-dimethoxyethane at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

We determined apparent molar volumes V_? at 278.15 ? (T/K) ? 368.15 and apparent molar heat capacities C_p,? at 278.15 ? (T/K) ? 393.15 at p = 0.35 MPa for aqueous solutions of tetrahydrofuran at m from (0.016 to 2.5) mol · kg^?1, dimethyl sulfoxide at m from (0.02 to 3.0) mol · kg^?1, 1,4-dioxane at m from (0.015 to 2.0) mol · kg^?1, and 1,2-dimethoxyethane at m from (0.01 to 2.0) mol · kg^?1. Values of V_? were determined from densities measured with a vibrating-tube densimeter, and values of C_p,? were determined with a twin fixed-cell, differential, temperature-scanning calorimeter. Empirical functions of m and T for each compound were fitted to our V_? and C_p,? results.     

Apparent molar volumes and apparent molar heat capacities of aqueous KI,HIO3, NaIO3, and KIO3 at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

We determined apparent molar volumes V_? at 298.15 ? (T/K) ? 368.15 and apparent molar heat capacities C_p,? at 298.15 ? (T/K) ? 393.15 for aqueous solutions of HIO₃ at molalities m from (0.015 to 1.0) mol · kg^?1, and of aqueous KIO₃ at molalities m from (0.01 to 0.2) mol · kg^?1 at p = 0.35 MPa. We also determined V_? at the same p and at 298.15 ? (T/K) ? 368.15 for aqueous solutions of KI at m from (0.015 to 7.5) mol · kg^?1. We determined C_p,? at the same p and at 298.15 ? (T/K) ? 393.15 for aqueous solutions of KI at m from (0.015 to 5.5) mol · kg^?1, and for aqueous solutions of NaIO₃ at m from (0.02 to 0.15) mol · kg^?1. Values of V_? were determined from densities measured with a vibrating-tube densimeter, and values of C_p,? were determined with a twin fixed-cell, differential temperature-scanning calorimeter. Empirical functions of m and T were fitted to our results for each compound. Values of K_a, Δ_rH_m, and Δ_rC_p,m for the proton ionization reaction of aqueous HIO₃ are calculated and discussed.     

Apparent molar volumes and apparent molar heat capacities of aqueous potassium hydrogen phthalate (KHP) and potassium sodium phthalate (KNaP) at temperatures fromT = 278.15 K toT = 393.15 K at the pressure 0.35 MPa

A vibrating-tube densimeter (DMA 512P, Anton Paar, Austria) was used to investigate the densities and volumetric properties of aqueous potassium hydrogen phthalate (KHP) and potassium sodium phthalate (KNaP). Measurements were made at molalities m from (0.006 to 0.66)mol · kg ^− 1, at temperatures from 278.15 K to 368.15 K and at the pressure 0.35 MPa. The densimeter was calibrated through measurements on pure water and on 1.0 mol · kg ^− 1NaCl(aq). We also used a twin fixed-cell, power-compensation, differential-output, temperature-scanning calorimeter (NanoDSC 6100, Calorimetry Sciences Corporation, Spanish Fork, UT, U.S.A.) to measure solution heat capacities. This was accomplished by scanning temperature and comparing the heat capacities of the unknown solutions to the heat capacity of water. Apparent molar volumes V_φand apparent molar heat capacities C_{p, φ}of the solutions were calculated and fit by regression to equations that describe the surfaces (V_φ, T, m) and (C_{p, φ}, T, m). Standard state partial molar volumesV₂^o and heat capacities C_p,2^owere estimated by extrapolation to the m =  0 plane of the fitted surfaces. Previously determinedC_{p, φ} for HCl(aq) and NaCl(aq) were used to obtain (Δ_rC_{p, m}, T, m) for the proton dissociation reaction of aqueous hydrogen phthalate. This (Δ_rC_p,m, T, m) surface was created by subtracting C_p,φfor KHP(aq) and for NaCl(aq) from the sum of C_p,φfor KNaP(aq) and for HCl(aq). Surfaces representing (Δ_rH_m, T, m) and (pQ_a, T, m), where pQ_adenotes the molality equilibrium quotient, were created by integration of our (Δ_rC_p,m, T, m) surface using values for (Δ_rH_m, m) and (pK_a, m) at T =  308.15 K from the literature as integration constants.     

Thermodynamics for ionization of water at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa: apparent molar volumes of aqueous KCl,KOH, and NaOH and apparent molar heat capacities of aqueous HCl,KCl, KOH,and NaOH

Apparent molar volumes V_φof aqueous KCl, KOH, and NaOH and apparent molar heat capacities C_{p, φ}of aqueous HCl, KCl, KOH, and NaOH have been determined at the pressure p =  0.35 MPa, and at molalities 0.015 ⩽m / mol · kg ^− 1⩽ 0.5. Densities were measured using a vibrating-tube densimeter (DMA 512, Anton Paar, Austria) at temperatures 278.15 ⩽T / K⩽ 368.15. These values were used to calculate the apparent molar volumes. A fixed-cell, differential-output, power-compensating, temperature-scanning calorimeter (NanoDSC model 6100, Calorimetry Sciences Corporation, Spanish Fork, UT, U.S.A.) was used to measure the heat capacities of the same solutions at temperatures 278.15 ⩽T / K⩽ 393.15. Results were fitted by using equations that describe the surfaces (m, T, V_φ) and (m, T, C_{p, φ}). Using these equations, we have calculated the surfaces (m, T, Δ_rV_m), (m, T, Δ_rC_{p, m}), (m, T, Δ_rH_m), (m,T , p Q_a), and (m, T,Δ_rS_m ) for the ionization of water in the presence of combinations of the above electrolytes. The last three surfaces were calculated by integration using our (m,T , Δ_rC_{p, m}) surface and literature values for the molality dependence of Δ_rH_mand pQ_a at T =  298.15 K.     

Thermodynamics of proton dissociations from aqueous l-proline: apparent molar volumes and apparent molar heat capacities of the protonated cationic,zwitterionic, and deprotonated anionic forms at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

Apparent molar volumes V_φ and apparent molar heat capacities C_p,φ were determined for aqueous solutions of l-proline, l-proline with equimolal HCl, and l-proline with equimolal NaOH at the pressure p=0.35 MPa. Density measurements obtained with a vibrating-tube densimeter at temperatures (278.15⩽T/K⩽368.15) were used to calculate V_φ values, and heat capacity measurements obtained with a twin fixed-cell, differential-output, power-compensation, temperature-scanning calorimeter at temperatures (278.15⩽T/K⩽393.15) were used to calculate C_p,φ values. Speciation arising from equilibrium was accounted for using Young’s Rule, and semi-empirical equations describing (V_φ, m, T) and (C_p,φ, m, T) for each aqueous equilibrium species were fitted by regression to the experimental results. From these equations, the volume change Δ_rV_m and heat capacity change Δ_rC_p,m for the protonation and deprotonation reactions were calculated. Additionally, the Δ_rC_p,m expression was integrated symbolically to yield values of the reaction enthalpy change Δ_rH_m, reaction entropy change Δ_rS_m, and equilibrium molality reaction quotient Q for both reactions. The results provide a much-improved thermodynamic characterization of aqueous l-proline and of its protonation and deprotonation equilibria.     

Apparent molar volumes and apparent molar heat capacities of aqueous N-acetyl-d-glucosamine at temperatures from 278.15 K to 368.15 K and of aqueous N-methylacetamide at temperatures from 278.15 K to 393.15 K at the pressure 0.35 MPa

We determined apparent molar volumes V_? from densities measured with a vibrating-tube densimeter at 278.15 ? (T/K) ? 368.15 and apparent molar heat capacities C_p,? with a twin fixed-cell, differential, temperature-scanning calorimeter at 278.15 ? (T/K) ? 363.15 for aqueous solutions of N-acetyl-d-glucosamine at m from (0.01 to 1.0) mol · kg⁻¹ and at p = 0.35 MPa. We also determined V_? at 278.15 ? (T/K) ? 368.15 and C_p,? at 278.15 ? (T/K) ? 393.15 for aqueous solutions of N-methylacetamide at m from (0.015 to 1.0) mol · kg⁻¹ and at p = 0.35 MPa. Empirical functions of m and T for each compound were fitted to our results, which are then compared to those for N,N-dimethylacetamide. Estimated values of Δ_rV_m(m, T) and Δ_rC_p,m(m, T) for formation of aqueous N-acetyl-d-glucosamine from aqueous d-glucose and aqueous acetamide are calculated and discussed.     

Apparent molar volumes and apparent molar heat capacities of aqueous urea, 1,1-dimethylurea,and N,N′-dimethylurea at temperatures from (278.15 to 348.15) K and at the pressure 0.35 MPa

Apparent molar volumes V_ϕ and apparent molar heat capacities C_p,ϕ were determined for aqueous solutions of urea, 1,1-dimethylurea, and N,N′-dimethylurea. Measurements were made at molalities m = (0.02 to 6.0) mol · kg⁻¹ for urea, at m = (0.01 to 1.6) mol · kg⁻¹ for 1,1-dimethylurea, and at m = (0.01 to 8.0) mol · kg⁻¹ for N,N′-dimethylurea. Experimental temperatures ranged from (278.15 to 318.15) K for both urea and 1,1-dimethylurea, and from (278.15 to 348.15) K for N,N′-dimethylurea. All measurements were conducted at the pressure p = 0.35 MPa. Density measurements obtained with a vibrating-tube densimeter were used to calculate V_ϕ values. Heat capacity measurements obtained with a twin fixed-cell differential temperature-scanning calorimeter were used to calculate C_p,ϕ values. Functions of m and T were fitted to the results and were compared with the literature values. The “structure making/structure breaking” aspects of urea in water are discussed. Comparisons are made between the different urea compounds, and the effects of the methyl-group additions are outlined.     

Apparent molar volumes and apparent molar heat capacities of aqueous adonitol,dulcitol, glycerol,meso-erythritol,myo-inositol,d-sorbitol,and xylitol at temperatures from (278.15 to 368.15) K and at the pressure 0.35 MPa

Apparent molar volumes V_ϕ were determined for aqueous adonitol, dulcitol, glycerol, meso-erythritol, myo-inositol, d-sorbitol, and xylitol at temperatures from (278.15 to 368.15) K and at the pressure 0.35 MPa, and apparent molar heat capacities C_p,ϕ of the same solutions were determined at temperatures from (278.15 to 363.15) K at the same pressure. Molalities m/(mol · kg⁻¹) of the solutions were in the range (0.02 ⩽ m ⩽ 3.2) for adonitol, (0.02 ⩽ m ⩽ 0.15) for dulcitol, (0.02 ⩽ m ⩽ 5.0) for glycerol, (0.02 ⩽ m ⩽ 3.0) for meso-erythritol, (0.02 ⩽ m ⩽ 0.5) for myo-inositol, (0.02 ⩽ m ⩽ 2.0) for d-sorbitol, and (0.02 ⩽ m ⩽ 2.7) for xylitol. A vibrating tube densimeter was used to obtain solution densities and a fixed-cell temperature scanning calorimeter was used to obtain heat capacities. Values of V_ϕ and C_p,ϕ for these sugar alcohols are discussed relative to one another and compared to values from the literature, where available.     

Thermodynamics of proton dissociations from aqueous glycine at temperatures from 278.15 to 393.15 K,molalities from 0 to 1.0 mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of glycine,glycinium chloride,and sodium glycinate

We have measured the densities of aqueous solutions of glycine, glycine plus equimolal HCl, and glycine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, molalities 0.01 ⩽ m/mol · kg⁻¹ ⩽ 1.0, and at p = 0.35 MPa, using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a fixed-cell differential scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values of V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), NaCl(aq) from the literature to calculate parameters for Δ_rC_p,m(T, m) for the first and second proton dissociations from protonated aqueous cationic glycine. We then integrated this value of Δ_rC_p,m(T, m) in an iterative algorithm, using Young’s Rule to account for the effects of speciation and chemical relaxation on the observed V_ϕ and C_p,ϕ of the solutions. This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for glycinium chloride {H₂Gly⁺Cl⁻(aq)} and sodium glycinate {Na⁺Gly⁻(aq)} which successfully modeled our observed results. We have then calculated values of Δ_rC_p,m, Δ_rH_m, Δ_rV_m, and pQ_a for the first and second proton dissociations from protonated aqueous glycine as functions of T and m.     

Thermodynamics of proton dissociations from aqueous alanine at temperatures from (278.15 to 393.15) K,molalities from (0.0075 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of alanine,alaninium chloride,and sodium alaninate

We have measured the densities of aqueous solutions of alanine, alanine plus equimolal HCl, and alanine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0075 ⩽ m/mol · kg⁻¹ ⩽ 1.0, and at the pressure p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic alanine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for alaninium chloride {H₂Ala⁺Cl⁻(aq)} and for sodium alaninate {Na⁺Ala⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous alanine as functions of T and m.     

Thermodynamics of proton dissociations from aqueous l-methionine at temperatures from (278.15 to 393.15) K,molalities from (0.0125 to 1.0) mol · kg−1, and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of l-methionine,methioninium chloride,and sodium methioninate

We have measured the densities of aqueous solutions of l-methionine, l-methionine plus equimolal HCl, and l-methionine plus equimolal NaOH at temperatures 278.15 ⩽ T/K ⩽ 368.15, at molalities 0.0125 ⩽ m/mol · kg⁻¹ ⩽ 1.0 as solubilities allowed, and at p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 ⩽ T/K ⩽ 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V_ϕ and the heat capacities to calculate apparent molar heat capacities C_p,ϕ for these solutions. We used our results and values from the literature for V_ϕ(T, m) and C_p,ϕ(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change Δ_rC_p,m(T, m) for ionization of water to calculate parameters for Δ_rC_p,m(T, m) for the two proton dissociations from protonated aqueous cationic l-methionine. We integrated these results in an iterative algorithm using Young’s Rule to account for the effects of speciation and chemical relaxation on V_ϕ(T, m) and C_p,ϕ(T, m). This procedure yielded parameters for V_ϕ(T, m) and C_p,ϕ(T, m) for methioninium chloride {H₂Met⁺Cl⁻(aq)} and for sodium methioninate {Na⁺Met⁻(aq)} which successfully modeled our observed results. Values are given for Δ_rC_p,m, Δ_rH_m, pQ_a, Δ_rS_m, and Δ_rV_m for the first and second proton dissociations from protonated aqueous l-methionine as functions of T and m.