Densities and excess molar volumes for mixtures of methanol with other alcohols at temperatures (288.15–313.15 K)

Densities have been measured for the binary mixtures of methanol with ethanol, isomers of propanol and butanol over the entire composition range at 288.15, 293.15, 298.15, 303.15, 308.15, 313.15 K. The density data have been used to calculate the molar volumes, thermal expansion coefficients and their excess values. The excess parameters have been fitted to the Redlich–Kister polynomial equation. The values of the molar volumes, excess molar volumes, thermal expansion coefficients and excess thermal expansion coefficients have been analyzed as a function of the mole fraction and the carbon chain length.     

Volumetric properties of the (tetrahydrofuran + water) and (tetra-n-butyl ammonium bromide + water) systems: Experimental measurements and correlations

In this communication, we report experimental density data for the binary mixtures of (water + tetrahydrofuran) and (water + tetra-n-butyl ammonium bromide) at atmospheric pressure and various temperatures. The densities were measured using an Anton Paar™ digital vibrating-tube densimeter. For the (tetrahydrofuran + water) system, excess molar volumes have been calculated using the experimental densities and correlated using the Redlich–Kister equation. The Redlich–Kister equation parameters have been adjusted on experimental results. The partial molar volumes and partial excess molar volumes at infinite dilution have also been calculated for each component. A simple density equation was finally applied to correlate the measured density of the (tetra-n-butyl ammonium bromide + water) system.     

Excess Molar Enthalpies and Excess Molar Volumes of (Water+Octan-1-ol or +Octan-2-ol) at 298.15 K

The excess molar enthalpies and volumes have been determined for the binary system (water+octan-1-ol or +octan-2-ol) by means of direct calorimetric and densimetric measurements in the miscibility range. The experimental data were described through a Redlich-Kister type equation. For excess enthalpies a sigmoidal shape is predicted,while excess volumes are negative except for a little positive queue observed for(water+octan-1-ol) system at very low water content. Also the partial molar enthalpies of solution and the partial molar volumes of water in the two isomeric octanols at infinite dilution have been evaluated and discussed. A comparison is made between excess enthalpies and excess free energies calculated by the UNIFAC method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone,and ethylacetate from T = (293.15 to 313.15) K

Densities of binary liquid mixtures of N-ethylformamide (NEF) with tetrahydrofuran (THF), 2-butanone (B), and ethylacetate (EA) were measured at temperatures from (293.15 to 313.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes, V^E, have been obtained from values of the experimental density and were fitted to the Redlich–Kister polynomial equation. The V^E values for all three mixtures are negative over the entire composition and temperature ranges. The V^E values become more negative as the temperature increases for all binary mixtures studied. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes, partial molar excess volumes and excess thermal expansions have been calculated.     

Volumetric,acoustic, optical and spectroscopic studies of binary mixtures of the ionic liquid, 1-butyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide and diethyl carbonate

The properties, density, speed of sound and refractive index of ‘IL’ [Bmim][NTf2], diethyl carbonate and their binary mixtures are measured over the whole composition range as a function of temperature between 303.15 and 323.15 K at atm. pressure. These values are used to calculate the excess molar volumes, excess partial molar volumes, partial molar volumes at infinite dilution, excess isentropic compressibility, free length, speeds of sound and isobaric thermal expansion coefficient for the mixture. Various rules were used to predict the refractive indices and the data have been compared with the experimental results. These excess properties are fitted to the Redlich–Kister type equation to obtain the binary coefficients and the standard deviations. A qualitative analysis of these parameters indicates strong intermolecular interactions and the interaction increases with the increase in temperature. This was further supported by IR spectroscopy. In addition, analysis of data of the mixture was done through the Prigogine–Flory–Patterson theory.     

Thermodynamic and transport properties of (1,2-ethanediol + 1-nonanol) at temperatures from (298.15 to 313.15) K

Densities and kinematic viscosities have been measured for (1,2-ethanediol + 1-nonanol) over the temperature range from (298.15 to 313.15) K. The speeds of sound in those mixtures within the temperature range from (293.15 to 313.15) K have been measured as well. Using the measurement results, the molar volumes, isentropic compressibility coefficients, molar isentropic compressibilities, and the corresponding excess and deviation values (excess molar volumes, excess isentropic compressibility coefficients, excess molar isentropic compressibilities, differently defined deviations of the speed of sound, and dynamic viscosity deviations) were calculated. The excess Gibbs free energies estimated by the use of the UNIQUAC model are also reported. The excess molar volumes and Gibbs free energies are positive, whereas the compressibility excesses are s-shaped. The excess and deviation values are expressed by Redlich–Kister polynomials and discussed in terms of variations of the structure of the system caused by the participation of two different alcohol molecules in the dynamic intermolecular association process through hydrogen bonding. The effect of temperature is discussed. The predictive abilities of the McAllister equation for viscosities of the mixtures under test have also been examined.     

Volumetric properties of (piperidine + water) binary system: Measurements and modeling

Densities of pure piperidine (CAS No.: 110-89-4) and of its mixtures with water have been measured over the whole range of compositions at temperatures from 283.15 K to 347.15 K using Anton Paar? digital vibrating tube densimeter. The density of this system has been found increasing with mass fraction of water. Excess molar volumes have been calculated using the measured experimental densities and correlated using the Redlich–Kister equation. Redlich–Kister equation parameters have been adjusted on experimental data. In addition, partial molar volumes and partial excess molar volumes at infinite dilution have been calculated for each component.     

Excess and apparent molar volumes of mixtures of water and acetonitrile between 0 and 25°C

From densities measured at 0, 1, 2.5, 5, 10 and 25°C of mixtures of water and acetonitrile, the excess molar volumes and the apparent and partial molar volumes of both components have been derived as a function of mixture composition. Contrary to results on enthalpies of solution in mixtures of water and acetonitrile, the values obtained do not show substantial changes around 0.7 mole fraction of water. At this composition and at low temperatures, the excess molar volumes exhibit a rather flat minimum and the apparent and partial molar volumes of water show an inflection.     

Ultrasonic and Volumetric Study of N–H Bond Complexes in Binary Mixtures

Experimental values of the density and ultrasonic velocity have been measured for binary mixtures of butylamine with 1-butanol and with tert-butanol at temperatures of 293.15, 303.15 and 313.15 K over the entire mole fraction range. From these data, the excess molar volumes, deviations in isentropic compressibility, excess internal pressures, and excess molar enthalpies have been calculated. All of the excess functions were fitted to Redlich-Kister polynomial relations to estimate the adjustable parameters along with the standard deviations of the fits. The variations of these excess functions with mole fraction of butylamine have been examined. The changes in these parameters with composition suggest that the interaction between butylamine and 1-butanol is strong, whereas its interaction with tert-butanol is weak. Further, the partial molar volumes and partial molar compressibilities at infinite dilution have also been evaluated since these parameters provide better insight for studying intermolecular interactions.     

Densities,Refractive Indices and Excess Properties of N-<Emphasis Type="Italic">p</Emphasis>-Tolylbenzohydroxamic Acid in Dimethyl Sulfoxide at 298.15 to 313.15 K

Densities and refractive indices have been measured for N-p-tolylbenzohydroxamic acid (p-TBHA) in dimethyl sulfoxide (DMSO) as a function of concentration at (298.15, 303.15, 308.15, 313.15 and 318.15) K. The apparent molar volumes and partial molar volumes were obtained from these density data. The limited partial molar expansivities have been calculated from the temperature dependence of the limiting partial molar volume. The molar refractions were calculated from the experimental refractive index values for p-TBHA in DMSO. The excess volumes, deviations of the refractive indices, and molar refractions were also calculated. The results are discussed in terms of molecular interactions.     

Volumetic Properties of Glycerol with N,N-Dimethylformamide and with Water at 25 and 35°C

Densities of glycerol + N,N-Dimethylformamide (DMF) and glycerol + water mixtures have been measured over the full range of compositions at 25 and 35°C. Excess molar volumes and excess partial molar volumes, of each system have been calculated. All mixtures show negative values of the excess molar volume due to increased interactions between unlike molecules.     

Thermodynamic and transport properties of (1-Butanol + 1,4-Butanediol) at temperatures from (298.15 to 318.15) K

Densities and kinematic viscosities have been measured for (1-butanol + 1,4-butanediol) over the temperature range from (298.15 to 318.15) K. The speeds of sound within the temperature range from (293.15 to 318.15) K have been measured as well. Using these results and literature values of isobaric heat capacities, the molar volumes, isentropic and isothermal compressibility coefficients, molar isentropic and isothermal compressibilities, isochoric heat capacities as well as internal pressures were calculated. Also the corresponding excess and deviation values (excess molar volumes, excess isentropic and isothermal compressibility coefficients, excess molar isentropic and isothermal compressibilities, different defined deviation speed of sound and dynamic viscosity deviations) were calculated. The excess values are negative over the whole concentration and temperature range. The excess and deviation values are expressed by Redlich–Kister polynomials and discussed in terms of the variations of the structure of the system caused by the participation of the two different alcohol molecules in the dynamic intermolecular association process through hydrogen bonding at various temperatures. The predictive abilities of Grunberg–Nissan and McAllister equations for viscosities of mixtures have also been examined.     

Excess molar volumes and molar refraction of 1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone+water water from 5 to 45°C

The excess molar volumes and molar refractionsR ₁₂ of 1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone (DMPU)+water have been determined over the entire mole fraction range at 10° intervals from 5 to 45°C and at atmosphere pressure. The excess volumes are all negative and they become more positive with increase of temperature. Limiting partial molar volumes for DMPU in water and water in DMPU are also reported.     

Volumetric Properties for Binary and Ternary Mixtures Containing Benzyl Alcohol,Ethyl Butyrate and Diethyl Malonate at <Emphasis Type="Italic">T</Emphasis> = (293.15–313.15) K and <Emphasis Type="Italic">p</Emphasis> = 0.087 MPa

The densities of binary and ternary mixtures of benzyl alcohol + ethyl butyrate and/or diethyl malonate were measured at T = (293.15–313.15) K and p = 0.087 MPa. From these data, the excess molar volumes, partial molar volumes, excess partial molar volumes, partial molar volumes at infinite dilution, thermal expansion coefficients and their excess values were calculated. The Redlich–Kister equations were fitted to the excess molar volumes data. The results show that the excess molar volumes for all considered binary and ternary systems are negative and decrease with increasing temperature. The same behavior was observed for the excess thermal expansion coefficients. Data for excess volumes in ternary system were fitted with the Nagata–Tamura and Cibulka models for which the Cibulka equation showed better fitting. The intermolecular interactions between molecules in these mixtures are discussed and explained based on these experimental data.     

Thermophysical and sonochemical behaviour of binary mixtures of decan-1-ol with halohydrocarbons at (T = 293.15 and 313.15) K

Densities and ultrasonic velocities of binary mixtures of decan-1-ol with 1,2-dichloroethane, 1,2-dibromoethane, and 1,1,2,2-tetrachloroethene have been measured over the entire range of composition at T = (293.15 and 313.15) K and at atmospheric pressure. From these results, the excess molar volumes, molar free volumes, excess molar isentropic compressibilities, limiting excess partial molar volumes, and isentropic compressibilities, intermolecular free lengths, and available volumes by three methods, thermal expansion coefficients, parameters related to space-filling ability, intermolecular free lengths, and molecular radii have been calculated. The experimental ultrasonic velocities have been analyzed in terms of the ideal mixture relations of Nomoto and Van Dael, Jacobson’s free length, Schaaff’s collision factor, Flory’s statistical, and Prigogine–Flory–Patterson theories and thermoacoustical parameters.     

Derived Properties of Binary Mixtures Containing (Acetone or Methanol) + Hydroxil Compounds

Abstract

This work reports values of the density, refractive index and speed of sound of the binary mixtures acetone or methanol with (2-methyl, 1-propanol, 3-methyl, 1-butanol, 1,2-ethanediol, 1,2-propanediol and 1,3-propanediol) at 298.15 K and atmosphere, as a function of the mole fraction. From the experimental values, the corresponding excess and derived magnitudes were computed (excess molar volumes, changes of refractive index on mixing and changes of isentropic compressibility on mixing), variable-degree polynomials being fitted to the results. Only expansive trend was observed for those mixtures enclosing branched alcohols. The influence of the hydroxil group in the nonideal behaviour of these mixtures were analyzed in terms of the partial molar excess volumes.     

Volumetric Properties of Difurylmethane in Methanol from 288.15 to 308.15 K

The densities of binary systems of difurylmethane (DFM) in methanol have been measured with an Anton Parr DMA 4500 vibrating-tube densimeter over the entire composition range at intervals of 5 K in the temperature range between 288.15 and 308.15 K. Excess molar volumes of the mixture, apparent molar volumes of DFM, and excess partial molar volumes of both components have been calculated to provide insight into the intermolecular interaction present in the mixtures investigated. Excess molar volumes have been fitted to a Redlich–Kister equation and they exhibited negative deviations from ideal behavior. Both the apparent molar volume of DFM and excess partial molar volumes of DFM and methanol exhibit a dependence on composition but are less sensitive to temperature.     

Density, excess volume, and excess coefficient of thermal expansion of the binary systems of dimethyl carbonate with butyl methacrylate, allyl methacrylate, styrene, and vinyl acetate at T = (293.15, 303.15, and 313.15) K

Densities of the binary systems of dimethyl carbonate with butyl methacrylate, allyl methacrylate, styrene, and vinyl acetate have been measured as a function of the composition at (293.15, 303.15, and 313.15) K at atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The excess molar volumes are negative for the (dimethyl carbonate + vinyl acetate) system and positive for the three other binaries, and become more so as the temperature increases from (293.15 to 313.15) K. The apparent volumes were used to calculate the values of the partial excess molar volumes at infinite dilution. The excess coefficient of thermal expansion is positive for the four binary systems. The calculated excess molar volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. An explanation of the results is offered based on the FT-IR (ATR) spectra of several mixtures of the different systems.     

Determination of the excess molar and partial molar volumes of the constituents in the binary mixtures with tri-ethylamine

The excess molar volume and excess partial molar volumes of binary mixtures of tri-ethylamine with toluene (Tn), ethylbenzene (Ebz) and n-propylbenzene (n-PBz) have been calculated using the MS-Excel method. The excess molar volumes have been found to be negative throughout the entire range of composition. The temperature effects are found to be insignificant, so the mixtures may be termed regular mixtures of Hildebrand.     

Hydration of alcohol clusters in 1-propanol-water mixture studied by quasielastic neutron scattering and an interpretation of anomalous excess partial molar volume

Quasielastic neutron scattering measurements have been made for 1-propanol-water mixtures in a range of alcohol concentration from 0.0 to 0.167 in mole fraction at 25 degrees C. Fraction alpha of water molecules hydrated to fractal surface of alcohol clusters in 1-propanol-water mixture was obtained as a function of alcohol concentration. Average hydration number N(ws) of 1-propanol molecule is derived from the value of alpha as a function of alcohol concentration. By extrapolating N(ws) to infinite dilution, we obtain values of 12-13 as hydration number of isolated 1-propanol molecule. A simple interpretation of structural origin of anomalous excess partial molar volume of water is proposed and as a result a simple equation for the excess partial molar volume is deduced in terms of alpha. Calculated values of the excess partial molar volumes of water and 1-propanol and the excess molar volume of the mixture are in good agreement with experimental values.