Towards a general approach for the impurity profiling of drugs by micellar electrokinetic chromatography

A general micellar electrokinetic chromatographic (MEKC) strategy for the impurity profiling of drugs was developed involving a sodium dodecyl sulfate (SDS) and a cetyltrimethylammonium bromide (CTAB) MEKC system. With this combination, in principle, each sample component passes the detector in at least one of the two MEKC systems provided that separation buffers of the same pH are used in both systems. In order to select the proper MEKC systems, the electroosmotic flow (EOF) and micelle migration time (t(mc)) were determined for separation buffers of several pH values, containing various amounts of surfactant and organic modifier. The selectivity of the MEKC systems was studied using a mixture of compounds with a wide range of physico-chemical properties. The final selection of two adequate MEKC systems for this approach was based on the requirements that the t(mc) (i.e., analysis time) of both systems was below 20 min and that the t(mc)/t(eof) ratio was above 3 or 2 for the SDS and CTAB system, respectively. Furthermore, the systems should provide high efficiency, exhibit differences in selectivity and use moderate concentrations of modifier and surfactant, so that, if needed, further optimization is possible. The selected MEKC systems contained 60 mM SDS or 10 mM CTAB, respectively, in a phosphate buffer (pH 7.5) with 10% acetonitrile. Some test compounds with extreme mobilities were used to demonstrate the suitability of the MEKC approach to detect each component of a sample. The potential of the proposed MEKC combination for impurity profiling was demonstrated by the analysis of fluvoxamine with several impurities at the 0.1% level.     

Determination of lignans in Schisandra chinensis using micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) has been developed as a promising method for the determination of lignans in plant samples. The separation conditions have been optimized with respect to the different parameters including sodium dodecyl sulfate (SDS) and acetonitrile concentration, pH of the background electrolyte, separation voltage, and capillary temperature. The background electrolyte consisting of 40 mM SDS and 35% acetonitrile in 10 mM tetraborate buffer (pH 9.3) was found to be the most suitable electrolyte for this analysis. The applied voltage of 28 kV (positive polarity) and the capillary temperature 25 degrees C gave the best separation of lignans. The interday reproducibility of the peak areas and the migration times was below 2.0%. The results of MEKC analyses were compared with those obtained by capillary electrochromatography (CEC) and reversed-phase high-performance liquid chromatography (RP-HPLC). The possibilities of using this method for the determination of lignans in drug and in serum samples were also tested.     

Determination of the chiral and achiral related substances of methotrexate by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatographic (CD-MEKC) method for the determination of the most important potential impurities of methotrexate (MTX): 2,4-diamino-6-(hydroxymethyl)pteridine, aminopterine hydrate, 4-[N-(2-amino-4-hydroxy-6-pteridinylmethyl)-N-methylamino] benzoic acid, 4-[N-(2,4-diamino-6-pteridinylmethyl)-N-methylamino] benzoic acid, and the distomer D-MTX is presented. The MEKC separation of these compounds was optimized by applying a step-by-step approach. The addition of beta-CD to a conventional MEKC system, based on sodium dodecyl sulfate (SDS) as surfactant, showed to be essential for the enantioresolution of racemic MTX as well as for the separation of the achiral impurities. To achieve high-resolution factor between the peaks adjacent to the main component (L-MTX), as required in the analysis of related impurities, the separation conditions were stressed; in particular, the addition of methanol to the CD-MEKC system resulted in a very effective choice. Under the optimized final conditions (100 mM SDS and 45 mM beta-CD in a mixture of 50 mM borate buffer, pH 9.30-methanol (75:25 v/v)), the method was validated showing a general adequate accuracy (93-106% recovery) in the determination of L-MTX related substances at the impurity level of 0.12% w/w with a relative standard deviation (RSD)% lower than 8% (n = 4). The method was successfully applied to the analysis of pharmaceuticals (tablets and injections) which showed to contain the distomer D-MTX as major impurity and aminopterine hydrate as a further related substance in the commercial tablets.     

Optimizing separation conditions for polycyclic aromatic hydrocarbons in micellar electrokinetic chromatography

We report the separation of polycyclic aromatic hydrocarbons (PAHs) using 0.1% poly(ethylene oxide) (PEO) in micellar electrokinetic chromatography (MEKC). In the presence of PEO, adsorption of PAHs on the capillary wall was reduced, leading to better resolution and reproducibility. Effects of tetrapentylammonium iodide (TPAI), dextran sulfate (DS), methanol, and sodium lauryl sulfate (SDS) on the separation of PAHs were elucidated. In terms of resolution and speed, DS, compared to TPAI, is a better additive for separation of PAHs. When using 0.1% PEO solution containing 45% methanol, 50 mM SDS, and 0.02% DS, separation of 10 PAHs containing 2 to 5 benzene rings was accomplished in less than 12 min at 15 kV in a commercial CE system. The method has also been tested for separating seven PAHs with high quantum yields when excited at 325 nm using a He-Cd laser. Unfortunately, separation of the seven PAHs was not achieved and sensitivity diminished under the same conditions. To optimize sensitivity, resolution and speed, a stepwise technique in MEKC has been proposed. The seven PAHs were resolved in 35 min at 15 kV when separation was performed in 0.1% PEO solution containing 35 mM SDS, 40% methanol and 0.02% DS for 2 min, and subsequently in 0.1% PEO solution containing 20 mM SDS, 50% methanol, and 0.02% DS.     

Determination of 5-aminosalicylic acid related impurities by micellar electrokinetic chromatography with an ion-pair reagent

A micellar electrokinetic chromatographic (MEKC) method was developed for the quantification of mesalazine or 5-aminosalicylic acid (5-ASA) and its major impurities 3-aminosalicylic acid, salicylic acid, sulfanilic acid and 4-aminophenol. The optimisation of the experimental conditions was carried out considering some important requirements: resolution, reproducibility, detection limits of 0.1% (m/m) or less, short total analysis time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds; the addition of tetrabutylammonium bromide (TBAB) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as TBAB concentration, SDS concentration, background electrolyte pH and concentration, were evaluated. Using a fused-silica capillary (8.5 cm effective length) complete analysis was obtained in a very short time. Under the optimised final conditions [120 mM 3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid buffer, pH 10.20, 65 mM SDS in the presence of 55 mM TBAB and 5% methanol] the method was validated for specificity, precision, linearity, limits of detection and quantitation, and robustness: the 5-ASA related impurities can be quantified at least at the 0.1% (m/m) level.     

Micellar electrokinetic and high-performance liquid chromatographic determination of potential manufacturing impurities in pholcodine

Quantitative high-performance liquid chromatographic (HPLC) and micellar electrokinetic chromatographic (MEKC) methods have been developed for the determination of four structurally related potential manufacturing impurities, including morphine, of the opiate derivative pholcodine. Pholcodine and the four impurities were separated by MEKC in less than 14 min using a 70 cm x 75 microm I.D. uncoated fused-silica capillary (25 kV at 30 degrees C) and a running buffer consisting of 10% acetonitrile (v/v) in 20 mM borate-phosphate buffer pH 8.0 containing 40 mM sodium dodecyl sulphate (SDS). The MEKC method was compared to a HPLC method using a 5 microm Luna phenyl-hexyl column (150 x 4.6 mm I.D.) eluted with a mobile phase consisting of a mixture of 10% (v/v) acetonitrile, 7% (v/v) tetrahydrofuran in 20 mM phosphate buffer pH 8.0. Both methods were fully validated and a comparison was made regarding selectivity, linearity, precision, robustness and limits of detection and quantitation. The presence of the impurities in different samples of pholcodine drug substance was investigated using both methods.     

Comparing micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for the analysis of preservatives in pharmaceutical and cosmetic products

In this study, separation and determination of nine preservatives ranging from hydrophilic to hydrophobic properties, which are commonly used as additives in various pharmaceutical and cosmetic products, by micellar electrokinetic chromatograpy (MEKC) and microemulsion electrokinetic chromatography (MEEKC) were compared. The effect of temperature, buffer pH, and concentration of surfactant on separation were examined. In MEKC, the separation resolution of preservatives improved markedly by changing the sodium dodecyl sulfate concentration. Temperature and pH of running buffers were used mainly to shorten the magnitude of separation time. However, in order to detect all preservatives in a single run in a MEEKC system, a microemulsion of higher pH was needed. The separation resolution was improved dramatically by changing temperature, and a higher concentration of SDS was necessary for maintaining a stable microemulsion solution, therefore the separation of the nine preservatives in MEEKC took longer than in MEKC. An optimum MEKC method for separation of the nine preservatives was obtained within 9.0 min with a running buffer of pH 9.0 containing 20 mM SDS at 25 degrees C. A separation with baseline resolution was also obtained within 16 min using a microemulsion of pH 9.5 which composed of SDS, 1-butanol, and octane, and a shorter capillary column at 34 degrees C. Finally, the developed MEKC and MEEKC methods determined successfully preservatives in various cosmetic and pharmaceutical products.     

Monitoring of the conversion from triptolide to tripchlorolide in Triptergium wilfordii by micellar electrokinetic caillary chromatography

A novel concocting method to convert Triptolide (T) into Tripchlorolide (T(4)) in the traditional Chinese herb Tripterygium wilfordii Hook F. and a micellar electrokinetic capillary chromatographic (MEKC) approach by which the conversion of Triptolide (T) and Tripchlorolide (T(4)) was identified and determined had been established. Investigations of the influence of different pH values of boric acid and borax buffer and of sodium dodecyl sulfate (SDS) and organic additive concentrations had been carried out, and the optimum separation for T and T(4) was achieved using boric acid and borax of pH 7.0 with 30 mM SDS and 20% (volume ratio) methanol as the running buffer. It was found that MEKC exhibited good accuracy, precision and repeatability and the content of T(4) was greatly increased in the herb that was treated by the new concocting method.     

Analysis of artichoke (Cynara cardunculus L.) extract by means of micellar electrokinetic capillary chromatography

The main constituents of artichoke extract were separated by micellar electrokinetic chromatography (MEKC), using a buffer consisting of 100 mM sodium dodecyl sulfate (SDS) in 20 mM sodium dihydrogen phosphate, 20 mM disodium tetraborate (pH 8.6) as background electrolyte. Optimum separation voltage of 28 kV (positive polarity) and a capillary temperature of 25 degrees C gave the best analysis. The UV detection was performed at 200 nm. The method was successfully used to analyze plant and drug samples as well as for the study of artichoke antioxidant activity. The quantitative MEKC results were in good agreement to those obtained previously by reversed-phase high-performance liquid chromatography (RP-HPLC).     

Micellar electrokinetic chromatography estimation of size and composition of procyanidins after thiolysis with cysteine

This paper describes the characterization of procyanidin mixtures by acid depolymerization in the presence of cysteine (thiolysis with cysteine) and micellar electrokinetic chromatography (MEKC). Reversed-phase liquid chromatography (RP-HPLC) and MEKC were investigated for the separation of the major components of the depolymerized mixtures (catechins and their cysteinyl derivatives). The solutes could only be effectively separated using MEKC. Two background electrolytes (BGEs) are recommended: (i) 50 mM phosphate at pH 7, containing 40 mM sodium cholate (SC) and 10 mM sodium dodecyl sulfate (SDS); (ii) a BGE with the same composition but containing only 50 mM SDS. The MEKC procedures here reported, are cheap, reliable and fast, and their potential in the determination of the size and composition in procyanidin mixtures has been shown. The proposed MEKC methods were validated by comparison with our intralaboratory reference RP-HPLC method using cysteamine as thiol donor.     

Optimised separation of endogenous urinary components using cyclodextrin-modified micellar electrokinetic capillary chromatography

In this study both native and chemically modified cyclodextrins (CDs) were investigated as buffer additives to improve the micellar electrokinetic capillary chromatography (MEKC) separation of endogenous bioanalytes in human urine. The following CDs were investigated: alpha, beta, gamma-CDs; hydroxypropyl-alpha-CD, hydroxypropyl-beta-CD, methylated beta-CD, sulphated beta-CD, sulphobutyl ether-beta-CD and hydroxypropyl-gamma-CD. The separations were compared to MEKC without additives. The best improvement in peak resolution and separation of urine components was observed with the sulphated beta-CD. A four-factor three-level full factorial design study was conducted on voltage, temperature, pH and sulphated beta-CD molarity. The optimum conditions were 25 mM sodium tetraborate, pH 9.5, 75 mM sodium dodecyl sulphate (SDS) and 6.25 mM sulphated beta-CD and were able to resolve 70 peaks from a urine pool in 12 min. These optimum conditions have been successfully applied to a number of clinical samples.     

Characterization of anacardic acids by micellar electrokinetic chromatography and mass spectrometry

A possibility of using capillary electrophoresis for separation of anacardic acids (6-alkylsalicylic acids) has been studied. Conventional micellar electrokinetic chromatography (MEKC) in non-coated fused silica capillaries and reversed-flow micellar electrokinetic chromatography (RF-MEKC) in capillaries coated with polydimethylacrylamide was applied for separation of anacardic acids extracted from cashew nuts. Influence of the composition of background electrolyte on the resolution of anacardic acid isomers was evaluated. Separations were performed using sodium dodecyl sulphate (SDS) micelles and mixed micelles of SDS and polyoxyethylene lauryl ether as a pseudostationary phase. To further improve the separation in RF-MEKC, beta-cyclodextrin and a dual cyclodextrin system of beta-cyclodextrin with heptakis-6-sulphato-beta-cyclodextrin was added to the working electrolyte. Best separation of anacardic acids were achieved in the polydimethylacrylamide-coated capillary using 10 mM phosphate background electrolyte pH 6.5 with addition of 1 M urea, 20% acetonitrile, 10 mM of beta-cyclodextrin and 1 mM of heptakis-6-sulfo-beta-cyclodextrin. Mass spectrometry was used for the identification of anacardic acids in the extract from cashew nuts in single and tandem mode using Q-TOF instrument. Nine anacardic acids were identified in the extract form the cashew nuts.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

Novel approach to the analysis and use of fullerenes in capillary electrophoresis

The analysis and use of fullerenes in capillary electrophoresis (CE) was investigated. Sodium dodecyl sulfate (SDS) was used to solubilize fullerenes C60, C70, and a mixture of C60 and C70 in water. The behavior of the solutions of the C60- and C70-SDS complexes was examined by CE with on-line UV-Vis diode array detection. This study included the use of a C60-SDS complex as a new method of micellar electrokinetic chromatography (MEKC) for the separation of polycyclic aromatic hydrocarbons (PAHs) using CE with uniwavelength detection. Since SDS micelles act as a pseudostationary phase in which the PAH compounds partition with their hydrophobic interior, the addition of C60 within the micelles enhanced separation of the PAHs. The preliminary results using C60-MEKC with SDS were compared to those obtained with MEKC with SDS. The capillary electrophoretic separations were performed in 10 mM borate-phosphate buffer with 100 mM SDS at pH 9.5.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Separation of polycyclic aromatic hydrocarbons by micellar electrokinetic chromatography with aqueous short-chain alcohol solvent

Micellar electrokinetic capillary chromatography (MEKC) with aqueous organic solvent has been developed to separate polycyclic aromatic hydrocarbons (PAHs). Methanol, ethanol or propanol as an organic modifier was added to sodium dodecyl sulfate (SDS) micellar solution in order to increase the solubility of very hydrophobic solutes in mobile phase. Both methanol and ethanol can be used as co-solvents for the separation of PAHs. Use of ethanol resulted in a shorter analysis time than use of methanol. The separations of some PAHs were unsatisfactory using propanol although the analysis time was much shorter than with ethanol. The influence of ethanol content, SDS concentration and temperature on the separations was studied. Benzene and nine polycyclic aromatic hydrocarbons were successfully separated using 50 mM SDS-20 mM phosphate-5 mM borate, containing 40% (v/v) ethanol at 35 degrees C. The relative standard deviation (R.S.D.) of t(R) ranged from 0.5 to 1.5% for six repeat injections.     

Comparison of Micellar Electrokinetic Chromatography with HPLC for the Separation of Hematoporphyrin Derivatives

ABSTRACT

A mixed SDS micelle and BSA buffer system was used in the micellar electrokinetic chromatography (MEKC) separation of hematoporphyrin derivatives (HPD) at pH 8.0 with untreated capillaries. The effects of altering the composition of sodium dodecyl sulfate (SDS) electrolyte solution on the separation efficiency of the hematoporphyrin derivatives were presented. The results show that separation efficiencies were enhanced by using a mixture of SDS and BSA. The results demonstrated that CE methodology can compete with well-established techniques such as HPLC for the separation of biomedical and pharmaceutical samples with regard to time and expense of analysis.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography as methods for the analysis of ten benzophenones

Microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatograpy (MEKC) were compared for their abilities to separate and detect ten similar benzophenones, which are commonly used as UV filters in various plastic and cosmetic products. Sodium dodecyl sulfate (SDS) concentration and column temperature rarely affected separation resolution for MEEKC, but separation of benzophenones could be improved by changing the SDS concentration and column temperature for MEKC. Buffer pH and ethanol (organic modifier) were found to markedly influence the separation selectivity for both MEEKC and MEKC systems. In addition, a higher electric voltage improved the separation efficiency without a noticeable reduction in separation resolution for MEEKC, whereas it caused a poor separation resolution for the MEKC system.     

Separation of aromatic hydrophobic sulfonates by micellar electrokinetic chromatography

Two different buffer systems for the separation of 12 aromatic hydrophobic sulfonates by micellar electrokinetic chromatography (MEKC) were developed. The following buffer systems were used: aqueous phosphate buffers containing either cetyltrimethylammonium bromide (CTAB) or sodium dodecyl sulfate (SDS). Eleven aromatic sulfonates were simultaneously separated in less than 35 min employing 20 mM phosphate buffer, pH 7.0 containing 50 mM SDS and 10% of acetonitrile.     

Analysis of positional isomers of hydroxylated aromatic cytokinins by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method was developed for the separation of six positional isomers of hydroxylated aromatic cytokinins (topolin and topolin riboside), including ortho-topolin, meta-topolin, para-topolin, ortho-topolin riboside, meta-topolin riboside, and para-topolin riboside. Optimum resolution and analysis time (ca. 20 min) for the six aromatic cytokinin standards were achieved with a running buffer at pH 8.0 consisting of 20 mM boric acid, 50 mM sodium dodecyl sulfate (SDS), and 20% v/v methanol. The method has good reproducibility and has been successfully applied to detect the presence of a putative ortho-topolin in coconut water extract sample purified using C(18) and mixed-mode solid-phase extraction (SPE) columns. Other advantages of this MEKC method are short analysis time, low solvent consumption, and separation of positional isomers which could be achieved by a simple aqueous buffer system without the use of expensive chromatographic columns. In addition, a high-performance liquid chromatography (HPLC) method with baseline separation of the six topolin and topolin riboside standards was developed for the confirmation of the endogenous ortho-topolin in coconut water sample. Finally, the presence of ortho-topolin was further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) based on its characteristic fragmentation pattern.