Physicochemical properties of multicomponent polyhydroxyalkanoates: Novel aspects

The physicochemical properties such as the degree of crystallinity and temperature and molecularmass characteristics of a number of polyhydroxyalkanoates of various chemical composition synthesized on a complex carbon substrate by bacteria Cupriavidus eutrophus В10646 have been investigated. Two-, three-, and four-component copolymer samples have different sets and ratios of monomers with various lengths of carbon chains: 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), 3-hydroxyvalerate (3HV), 3-hydroxyhexanoate (3HH), 3-hydroxy-4-methyl valerate (3H4MV), and diethylene glycol (DEG). It has been shown that weight-average molar mass М _w and polydispersity vary in a wide range with no correlation existing with the composition of copolymer polyhydroxyalkanoates and that thermal stability is preserved in the temperature interval between the melting temperature and the thermal degradation temperature from 100 to 120–140°С. The composition and ratio of monomers most notably affect the degree of crystallinity of polyhydroxyalkanoates. Significant differences between the degrees of crystallinity of three- and four-component polyhydroxyalkanoates have been found for the first time. The degree of crystallinity for copolymers P(3HB/3HV/4HB) is 9–22%, and the degree of crystallinity for copolymers P(3HB/3HV/3HH) and P(3HB/3GV/3H4MV) is 41–63%; this value is close to the degree of crystallinity for diblock copolymers P(3HB)/DEG, which is 56–69%. For the four-component copolymers P(3HB/3GV/4HB/3HH), the degree of crystallinity is 30–41%. The values of М _w for the copolymers P(3HB/DEG) are inhomogeneous and the polymers contain fractions uneven with respect to molecular mass: a high-molecular-mass polymer (М _w from 2700 to 4900 kDa) and a low-molecular-mass polymer (М _w = 46–167 kDa). For the copolymers P(3HB)/DEG and P(3HB/3HV/3H4MV), two peaks are observed in the region of melting with the gap between these peaks being 4–20°С. All of the types of copolymer samples, regardless of the monomer ratio, show an increase in elongation at break against the background of a decrease in tensile stress and Young’s modulus, with these effects being pronounced to different extents. On the whole, the properties of multicomponent polyhydroxyalkanoates differ appreciably.     

Crystalline morphology and thermal properties for random copolyesters of (R)‐3‐hydroxybutyric acid with different hydroxyalkanoic groups

The solid‐state structures and thermal properties of melt‐crystallized films of random copolymers of (R)‐3‐hydroxybutyric acid (3HB) with different hydroxyalkanoic acids such as (R)‐3‐hydroxypentanoic acid (3HV), (R)‐3‐hydroxyhexanoic acid (3HH), medium‐chain‐length (R)‐3‐hydroxyalkanoic acids (mcl‐3HA; C8‐C12), 4‐hydroxybutyric acid (4HB), and 6‐hydroxyhexanoic acid (6HH) were characterized by means of small‐angle X‐ray scattering, differential scanning calorimetry, and optical microscopy. The randomly distributed second monomer units except for 3HV in copolyesters act as defects of P(3HB) crystal and are excluded from the P(3HB) crystalline lamellae. The lamellar thickness of copolymers decreased with an increase in either the main‐chain or the side‐chain carbon numbers of second monomer units. In addition, the growth rate of spherulites decreased with an increase in the carbon numbers of second monomer units for copolymers with an identical comonomer composition. These results indicate that the steric bulkiness of second monomer unit affects on the crystallization of 3HB segments in random copolyesters.     

Influence of feeding strategies of mixed microbial cultures on the chemical composition and microstructure of copolyesters P(3HB‐co‐3HV) analyzed by NMR and statistical analysis

NMR spectroscopy was applied for quantitative and qualitative characterization of the chemical composition and microstructure of a series of poly(3‐hydroxybutyrate‐co‐3‐hydoxyvalerate) copolymers, P(3HB‐co‐3HV), synthesized by mixed microbial cultures at several different feeding strategies. The monomer sequence distribution of the bacterially synthesized P(3HB‐co‐3HV) was defined by analysis of their high‐resolution 1D ¹³C NMR and 2D ¹H/¹³C HSQC and ¹H/¹³C HMBC NMR spectra. The results were verified by employment of statistical methods and suggest a block copolymer microstructure of the P(3HB‐co‐3HV) copolymers studied. Definitive distinction between block copolymers or a mixture of random copolymers could not be achieved. NMR spectral analysis indicates that the chemical composition and microstructure of the copolymers can be tuned by choosing a correct feeding strategy. Copyright © 2009 John Wiley & Sons, Ltd.     

Bioconversion of Glycerine Pitch into a Novel Yellow-Pigmented P(3HB-co-4HB) Copolymer: Synergistic Effect of Ammonium Acetate and Polymer Characteristics

Glycerine pitch waste generated from oleochemical industry was exploited as a carbon source for poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) copolymer production by a novel, yellow-pigmented bacterium Cupriavidus sp. USMAHM13 to improve the economics of microbial polyhydroxyalkanoate production and to establish a feasible waste management approach. Medium optimization using response surface methodology through shake-flask fermentation had led to the accumulation of P(3HB-co-51%4HB) copolymer using a combination of glycerine pitch (10 g/l), 1,4-butanediol (8.14 g/l), and ammonium acetate (2.39 g/l). P(3HB-co-4HB) copolymers with 4HB monomer compositions ranged from 3 to 40 mol% were obtained through batch fermentation in a bioreactor using different concentrations of ammonium acetate. The copolymers exhibited a wide range of material properties depending on the monomer composition and type of carbon sources. P(3HB-co-40%4HB) was a typical random copolymer, whereas other P(3HB-co-4HB) produced were blend copolymers. Carotenoid pigment which was produced simultaneously with the polymer production was found to have negligible effect on the mechanical and thermal properties of the P(3HB-co-4HB) copolymer films.     

Novel Copolymers of Styrene and Some Halogen Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH═C(CN)₂ (where R is 2-bromo,3-bromo, 3-chloro, 2,3-dichloro, 2-chloro-6-fluoro, 2,6-difluoro, 3,4-difluoro, and 3,5-difluoro) and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 200–800°C range.     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

Radical Copolymerization of Fluorine Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes with 4-Fluorostyrene: Synthesis and Characterization

Novel copolymers of trisubstituted ethylene monomers, fluorine ring-substituted 2-phenyl-1,1-dicyanoethenes, RC₆H₄CH[dbnd]C(CN)₂ (where R is 2-F, 3-F, and 4-F) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. High T _g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decomposed in two stages in the range 210–600°C.     

Novel Copolymers of Styrene. 9. Methyl and Methoxy Ring-Substituted 2-Cyano-3-phenyl 2-propenamides

Novel electrophilic trisubstituted ethylene monomers, methyl and methoxy ring- substituted 2-cyano-3-phenyl-2-propenamides, RPhCH=C(CN)CONH₂, where R is 2,3-dimethyl, 2,4-dimethyl, 2,5-dimethyl, 2-(3-methoxyphenoxy), 2-(4-methoxyphenoxy), 3-(4-methoxyphenoxy), 4-(4-methylphenoxy), 2,3-methylenedioxy were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (5.8–33.8 wt%), which then decomposed in the 500–800°C range.     

Correlation of Composition and DP of Some ThreeComponent Phenolic Block Copolymers with Their Titration Curves in Nonaqueous Media

Some three-component phenolic block copolymers have been prepared from the following three monomeric units: p-amino-phenol, p-chlorophenol, and p-creso1. Homopolymerization of these monomers has been done with formaldehyde in the presence of acid catalyst. The homopolymer samples were then condensed together with stoichiometric quantities of formaldehyde and acid catalyst. Several samples of the copolymers were also prepared by changing the composition of the feed during homopolymerization. Composition, DP, and the average number of a particular monomeric uhit in a block of a copolymer chain has been deduced from electrometric titration curves of the copolymers in nonaqueous media.

Simultaneous copolymerization of three different monomer species may give rise to a copolymer whose composition will depend on the relative reactivity of the monomers. In normal copolymerization the different monomers alternate in the chain either in a more or less regular or in a completely random manner. Some preliminary investigations on a few three-component random phenolic copolymers revealed that composition, DP, and dissociation behavior of such systems could be evaluated by electrometric titration techniques in nonaqueous media [1]. Since three-component copolymers as such are quite complex, it was therefore considered of interest to see whether such simple techniques could be used for getting information about these copolymers prepared under various conditions. Keeping this fact in view, block copolymers involving the following three monomeric units have been prepared: p-aminophenol (PAP), p-chlorophenol (PClP), and p-cresol (PC). Block copolymers have been prepared by combining the homopolymer chains of the three monomers with the aid of functional groups and formaldehyde. The feed composition of the homopolymers has also been varied to change the size of the blocks. The characteristic feature of these three-component copolymers is the presence of a phenolic OH group in each of its repeating units and the presence of -NH₂ and Cl groups as structural substi-tuents in some of the repeating units. One can thus deduce the composition of the copolymers from the quantitative estimation of C1 and -NHz groups. An attempt has been made in this paper to correlate composition, DP, size of some of the blocks in the copolymer chains, intramolecular hydrogen bonding, etc. with the features of electro-metric titration curves of the copolymers in nonaqueous media.     

Novel Copolymers of Styrene. 10. Halo Ring-Substituted 2-Cyano-3-phenyl-2-propenamides

Novel electrophilic trisubstituted ethylene monomers, halo ring-substituted 2-cyano-3-phenyl-2-propenamides, RPhCH ? C(CN)CONH₂, where R is 2-bromo, 3-bromo, 2-fluoro, 3-fluoro, 2-iodo, 3-iodo, and 4-iodo were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (7-19 wt%), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene. 11. Ring-Substituted 2-Cyano-3-phenyl-2-propenamides

Novel electrophilic trisubstituted ethylene monomers, halo ring-disubstituted 2-cyano-3-phenyl-2-propenamides, RPhCH = C(CN)CONH₂, where R is 2,3-difluoro, 2,4-difluoro, 2,5-difluoro, 2,6-difluoro, 3,4-difluoro, 3,5-difluoro, 2-chloro-4-fluoro, 3-chloro-2-fluoro, 3-chloro-4-fluoro were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (10–14 wt%), which then decomposed in the 500–800°C range.     

Photochromic copolymers containing 3-indolylfulgides/indolylfulgimides: Synthesis and photochemical properties in toluene and as films

Photochromic indolylfulgimides covalently attached to polymers have beneficial properties for optical switching. A 3-indolylfulgide and two 3-indolylfulgimides with one or two polymerizable styrene groups attached on the nitrogen atom(s) were synthesized. Copolymerization with methyl methacrylate (MMA) provided linear copolymers (one styrene group) or a cross-linked copolymer (two styrene groups). The properties of the monomers and copolymers in toluene or as thin films were characterized. The new copolymers were photochromic (reversible Z-to-C isomerization), absorbed visible light, and revealed good thermal and photochemical stability. At room temperature, all copolymer films showed no loss of absorbance after 5 weeks. At 80 °C in either toluene or as films, the Z-forms copolymers were less stable than the C-form copolymers, which showed little or no degradation after 400 h. The degradation rate due to repeated ring-closing – ring opening cycles was less than 3% per 100 cycles. The cross-linked copolymer showed photochemical stability comparable to monomeric fulgides in toluene, <1% per 100 cycles. In general, the properties of the linear and cross-linked copolymers were similar to the corresponding monomers in toluene. In films, the conformations of the Z-form were restricted due to the matrix indicating that the preparation of films from the C-form is advantageous.     

Donor-Acceptor Complexes in Copolymerization. XXVIII. Role of Matrices in Polymerization of Comonomer Charge Transfer Complexes

ABSTRACT

In a proposed mechanism for the homopolymerization of comonomer charge transfer complexes to alternating

copolymers, the dimeric [D^+?.. A…MX-XM…A^?+..D] complexes are arranged in the form of a rigid matrix whose size is determined by the initial complex concentration. After polymerization proceeds through the matrix, uncomplexed monomers diffuse to the complexing agent affixed to the copolymer chain, new complexes are generated, and the new copolymer replicates the molecular weight of the original matrix. The addition of vanadium compound to a D-A…R_xAIX_y system converts the dimeric to monomeric complexes which form a smaller, flexible matrix and yield lower molecular weight copolymer. Nitriles which coordinate with the Al atom behave similarly to the vanadium compounds.     

Nucleation and crystallization of PS-b-PEO-b-PCL triblock copolymers

We have recently prepared a series of Polystyrene-b-Poly(ethylene oxide)-b-Polycaprolactone (PS-b-PEO-b-PCL or SEOCL) triblock copolymers of varying compositions and molecular weights. These ABC triblock copolymers present the peculiarity that two of the three blocks are able to crystallize upon cooling from an already phase segregated melt. When either of the crystallizable blocks or both are a minor phase, a fractionated crystallization process develops. The confinement of crystallizable blocks in the nanoscopic scale enables the clear observation in some cases of exclusive crystallization from homogeneous nuclei of two components within the triblock copolymer. The homogeneous nature of the nucleation was deduced since the supercooling attained is the maximum possible before vitrification of the material takes place. The self-nucleation domains were also found to depend on the composition and molecular weight of the copolymers. The block copolymers exhibited a marked decrease in crystalline memory and when the crystallizable blocks constitute minor phases, the self-nucleation domain disappears. The reason behind this behavior is that only at lower self-nucleation temperatures the density of self-nuclei becomes high enough to include at least one crystal fragment per confined microdomain in view of their vast numbers (e.g., 10¹⁶/cm³).     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Novel Copolymers of 4-Fluorostyrene. 11. Some Ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 1,1-dicyano-2-(1-naphthyl)ethylenes, RC₁₀H₆CH?C(CN)₂ (where R is H, 2-OCH₃, 4-OCH₃) and 4-fluorostyrene were prepared by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is (5.86) > 2-CH₃O (4.28) > 4-CH₃O (2.87). Relatively high T_g of the copolymers in comparison with that of poly(4-fluorostyrene) indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (7.3–7.7% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene and Alkyl Ring‐Substituted Methyl 2‐Cyano‐3‐phenyl‐2‐propenoates

Electrophilic trisubstituted ethylene monomers, alkyl ring substituted methyl 2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₄CH[dbnd]C(CN)CO₂CH₃, where R is 2‐methyl, 3‐methyl, 4‐methyl, 4‐isopropyl, and 2,5‐dimethyl were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN elemental analysis, IR, ¹H and ¹³C NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 260–400°C range.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.     

Synthesis and characterization of hyperbranched aromatic polyamide copolymers prepared from AB2 and AB monomers

A series of hyperbranched aromatic polyamide copolymers has been prepared and characterized from direct polycondensation of AB₂ and AB monomers. Structure of the monomers and the molar ratio of AB₂/AB showed strong influence on the properties of resulting copolymers. A small amount of AB₂ branching unit improved markedly the solubility of the resulting copolymer. Mark-Houwink parameters of the copolymers were essentially independent of the mole ratio of the monomers. The physical and mechanical properties of resulting copolymers were influenced not only by the mole ratio of monomers, but also by the structure of the monomers employed.     

Stereoelective radical copolymerization of (RS)-α-methylbenzyl vinyl ether with (S)-(-)- or (R)-(+)-N-(α-methylbenzyl)maleimide

Racemic α-methylbenzyl vinyl ether was copolymerized with optically active (S)-(-)- or (R)-(+)-N-(α-methylbenzyl)maleimide using 2,2′-azobisisobutyronitrile in order to examine the possibility of stereoelective radical polymerization of vinyl-type racemic monomers. The resulting copolymers were found to have almost alternating sequences of the two kinds of monomeric units. The non-polymerized α-methylbenzyl vinyl ether, recovered from the copolymerization system, showed an optical activity of opposite sign to the optically active comonomer used, indicating clearly that the co-polymerization process is stereoelective. It was confirmed that α-methylbenzyl vinyl ether preferentially incorporated in the copolymer has the same absolute configuration as the optically active N-substituted maleimide.