Solid-state NMR study of biodegradable starch/polycaprolactone blends

Abundant literature exists on starch or modified starch blended with biodegradable polyesters to achieve good performance with cheap compost plastics. The level of miscibility in these blends is one of the most relevant parameters. In the present study, solid-state ¹H and ¹³C NMR spectra, as well as carbon spin-lattice relaxation times T₁(C) and proton spin-lattice relaxation times T₁(H) and proton spin-lattice relaxation times in the rotating frame T_1ρ(H) of biodegradable starch (or starch formate)/polycaprolactone (PCL) (or polyester (PE) oligomers) blends and samples of the neat components were measured. From the T_1ρ(H) and T₁(H) relaxation times it follows that blends starch/PCL, starch/PE-oligomers and starch formate/PE-oligomers are phase separated even on the scale of 20-110 nm. On the contrary starch formate/PCL blend is phase separated on the scale 2.5-12 nm but homogeneously mixed on the scale 20-90 nm. Moreover, shorter T₁(C) and especially T_1ρ(H) values found for the starch or starch formate component in all these blends in comparison with neat samples show that molecular mobility of starch and starch formate segments is affected by blending. This indicates some miscibility also in phase separated blends which can happen in amorphous channels of starch.     

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

In this study, poly(lactic acid) (PLA)/starch blends were prepared through reactive melt blending by using PLA and starch as raw materials and vegetable oil polyols, polyethylene glycol (PEG), and citric acid (CA) as additives. The effects of CA and PEG on the toughness of PLA/starch blends were analyzed using a mechanical performance test, scanning electron microscope analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray diffraction, rheological analysis, and hydrophilicity test. Results showed that the elongation at break and impact strength of the PLA/premixed starch (PSt)/PEG/CA blend were 140.51% and 3.56 kJ·m⁻², which were 13.4 and 1.8 times higher than those of pure PLA, respectively. The essence of the improvement in the toughness of the PLA/PSt/PEG/CA blend was the esterification reaction among CA, PEG, and starch. During the melt-blending process, the CA with abundant carboxyl groups reacted in the amorphous region of the starch. The shape and crystal form of the starch did not change, but the surface activity of the starch improved and consequently increased the adhesion between starch and PLA. As a plasticizer for PLA and starch, PEG effectively enhanced the mobility of the molecular chains. After PEG was dispersed, it participated in the esterification reaction of CA and starch at the interface and formed a branched/crosslinked copolymer that was embedded in the interface of PLA and starch. This copolymer further improved the compatibility of the PLA/starch blends. PEGs with small molecules and CA were used as compatibilizers to reduce the effect on PLA biodegradability. The esterification reaction on the starch surface improved the compatibilization and toughness of the PLA/starch blend materials and broadens their application prospects in the fields of medicine and high-fill packaging.     

NMR relaxometry evaluation of nanostructured starch-PLA blends

Blends formed by starch and poly(lactic acid) (PLA) are very promising from environmental and economic standpoints, because starch is an abundant and cheap natural polymer and PLA is a biodegradable polymer that has good mechanical properties. In this study, starch-PLA blends were prepared by solution casting, employing chloroform and distilled water as a solvent pair. Then, dispersions containing 1, 3 and 5% montmorillonite clay and a dispersion containing 0.1% silica were added to the starch-PLA blends. The new materials obtained were characterized by X-ray diffraction, thermal analysis and, especially, nuclear low-field nuclear magnetic resonance (LF-NMR) relaxometry to measure the proton spin-lattice relaxation. All blends composed of starch and PLA showed significant increase in relaxation time due to the homogenous mixing of both polymers as a consequence of strong intermolecular interaction between them. Addition of clays caused substantial modification of the material and a large unique domain was observed. As a consequence, the domains corresponding to pure polymers were not observed. With the addition of the clay NT25, intermediate degradation temperatures were observed at concentrations of 3 and 5%, compared to the degradation temperatures of pure polymers. The X-ray diffraction results indicated the formation of an intercalated nanocomposite. There was an increase in the organization of the material compared to previous results observed for polymeric material, indicating the formation of an intercalated structure.     

Mechanical, morphological and biodegradation studies of microwave processed nanostructured blends of some bio-based oil epoxies with poly (vinyl alcohol)

Bioresource based blends exploit the synergy between polymers derived from renewable resource and commercial polymers to obtain desirable physical, mechanical, and biodegradable properties. With the aim to develop a sustainable resource based biodegradable mulch films, nanostructured blends of epoxies of linseed oil (LOE) and dehydrated castor oil (DCOE) with poly (vinyl alcohol) (PVA) were prepared in the weight ratios of 20/80, 50/50 and 80/20. Microwave-assisted blending was used for the synthesis of DCOE/LOE blends with PVA and the results were compared with conventional solution blending using FT-IR, TGA-DTA and optical measurements. The results revealed that microwave-assisted blending proved to be an efficient method for the formation of compatible blends in a short span of time as compared to conventional solution blending. Transmission electron microscopy (TEM) analysis of DCOE/PVA and LOE/PVA blends synthesized by microwave-assisted method confirmed the formation of a nanostructured blend. Scanning electron microscopy (SEM), respirometry and mechanical measurements were carried out to compare the morphology, biodegradability, and the mechanical strength of DCOE/PVA and LOE/PVA blends. It was observed that DCOE/PVA blends exhibited higher biodegradability, better mechanical properties, and lower moisture absorption characteristics as compared to LOE/PVA blends. The mechanical strength, moisture absorption, and biodegradability of these blends were also compared with blends of other bioresource based polymers such as sugarcane bagasse (SCB), waste gelation (WG), apple peal (AP), and starch/glycerol with PVA, as available from the cited literature in the text.     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

High-Resolution Solid-State NMR Characterization of Morphology in Annealed Polylactic Acid

Single-pulse ¹³C NMR spectra and spin-lattice relaxation times T₁(¹H), detected indirectly via ¹³C carbons, and T₁(¹³C) were measured at 31°C for virgin pelletized and annealed polylactic acid (PLA) samples using the magic-angle spinning technique. The structural relaxation resulting in more regular crystals with narrower conformation distribution and increase in the lamellae thickness and crystallinity brought about by annealing at 100°C was deduced from the narrowing of the ¹³C NMR lines and proton spin-lattice relaxation times T₁(¹H). The spin-lattice relaxation times T₁(¹³C) related to the respective carbons of the α-polymorph of PLA are also discussed in the study.     

Nuclear spin relaxation due to chemical shift anisotropy of gas-phase 129Xe

Nuclear spin relaxation provides detailed dynamical information on molecular systems and materials. Here, first-principles modeling of the chemical shift anisotropy (CSA) relaxation time for the prototypic monoatomic (129)Xe gas is carried out, both complementing and predicting the results of NMR measurements. Our approach is based on molecular dynamics simulations combined with pre-parametrized ab initio binary nuclear shielding tensors, an "NMR force field". By using the Redfield relaxation formalism, the simulated CSA time correlation functions lead to spectral density functions that, for the first time, quantitatively determine the experimental spin-lattice relaxation times T(1). The quality requirements on both the Xe-Xe interaction potential and binary shielding tensor are investigated in the context of CSA T(1). Persistent dimers Xe(2) are found to be responsible for the CSA relaxation mechanism in the low-density limit of the gas, completely in line with the earlier experimental findings.     

Water Dynamics in Starch Based Confectionery Products including Different Types of Sugar

Starch-based confectionery products were prepared using different types of sugar. In addition to using different sugar, starch was replaced with soy protein isolate (SPI) in some of the products. ¹H NMR spin-lattice relaxation experiments were performed for the collection of products in a broad frequency range from 4 KHz to 30 MHz to get insight into the influence of different sugar types and SPI on the dynamics of water in composite gel systems. The relaxation data have been decomposed into relaxation contributions associated with two different pools of water molecules characterized by different mobility. The translation dynamics of water molecules has been quantitatively described in terms of a dedicated relaxation model. The influence of the sample composition (the type of sugar and/or the presence of SPI) on the water mobility was thoroughly discussed. The results indicate that the addition of soy protein does not affect water dynamics for samples including sucrose. In addition, as the complementary measurements, physical properties of the products, such as the moisture content, water activity and texture, were investigated in terms of X-ray diffraction and thermogravimetric analysis.     

Molecular dynamics in PVDF/PVA blends as revealed by dielectric loss spectroscopy

The relaxation behavior of a series of compatible poly(vinylidene fluoride) (PVDF) and poly(vinyl acetate) (PVA) blends has been investigated by dielectric spectroscopy in a broad frequency and temperature range. Blends with PVDF content higher than 60% in weight are semicrystalline. Semicrystalline blends show a relaxation (α_c) occurring in the crystalline phase of PVDF. Both semicrystalline and amorphous blends exhibit two processes, α and β associated to the overall segmental dynamics and to localized motions in the amorphous phase, respectively. For high PVDF content samples, the β relaxation exhibits an anomalous behavior characterized by a crossover from segmental to local dynamics, upon decreasing temperature, attributed to confinement effects taking place in PVDF segregated regions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1653–1661, 2007     

Improving the Processing Ability and Mechanical Strength of Starch/Poly(vinyl alcohol) Blends through Plasma and Acid Modification

Summary: In this study, maleic anhydride (MA), and citric acid (CA) used as the processing additive and plasma treatment to improve the processing ability and mechanical strength of biodegradable starch/poly (vinyl alcohol) (PVA) blends were studied. The melt flow index (MFI) of starch/ glycerol/PVA (300g/60g/80g) blend was increased from 2.3g/10min to 32.7g/10min by adding 3g of MA and to 130 g/10min by adding MA and plasma treatment. The tensile strength of starch/glycerol/PVA blend increased from 3.48 to 6.21 MPa by adding 1.5g of MA and 1.5g of CA, while it increased to 6.26 MPa by plasma treatment. Esterification reaction which was evidenced by FTIR has been showed to improve the compatibility between starch and PVA when MA was dissolved into glycerol and glycerol grafted onto plasma pretreatment PVA. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) imaging were used to study the morphology of extruded blends.     

Structural and dynamical studies of poly(vinyl alcohol) gels by high-resolution solid-state C NMR spectroscopy

The ¹³C CP/MAS NMR spectra of isotactic, syndiotactic and atactic poly(vinyl alcohol) (PVA) gels were measured in order to clarify the structure of the immobile component of PVA gel. In the ¹³C CP/MAS NMR spectra, the three CH carbon peaks I, II and III (at about 77, 71 and 65 ppm) were clearly observed, which originate from the formation of strong intermolecular or intramolecular hydrogen bonds between hydroxyl groups like solid PVA. It has been assigned that these peaks originate from the crosslinked region in the gel state. On the basis of the experimental results, intermolecular hydrogen bonds play an important role in the formation of the crosslinked-region in the gel state. Further, the effect of PVA's tacticity on the amount of the crosslinked regions by intermolecular interactions was discussed. In addition, molecular motion in the immobile and mobile region of PVA gel was discussed through the observation of ¹³C spin-lattice relaxation time T₁.     

NMR investigation of the dynamics of banana shaped molecules in the isotropic phase: a comparison with calamitic mesogens behaviour

The first translational self-diffusion NMR measurements in the isotropic phase of banana-shaped liquid crystals are reported. In this paper, two banana-shaped mesogens, having a similar molecular structure and showing a nematic phase, have been investigated by means of translational self-diffusion NMR, (2)H NMR spin-spin and (1)H NMR spin-lattice relaxation measurements in the isotropic phase. While (1)H diffusion and (2)H relaxation times reveal a peculiar slow dynamic behaviour of banana-shaped mesogens compared with calamitic mesogens, the (1)H relaxation times seem to be affected by fast dynamics only. The origin of these dynamic features is discussed in terms of overall and internal molecular motions, in the frame of recent speculations concerning the formation of molecular clusters or aggregates in the isotropic phase of banana-shaped liquid crystals.     

Structure and interactions in homopolymers and blends as studied by the methods of vibrational and nmr spectroscopy

The combination of IR, Raman and NMR spectroscopy was used in the study of the blends of semicrystalline and amorphous polymers with considerably different strength of intermolecular interactions: poly(ϵ-caprolactam)/polystyrene (PCL/PS), poly(ethylene oxide)/poly(methyl methacrylate) (PEO/PMMA) and poly(N-methyllaurolactam)/poly(4-vinylphenol) (PNMLL/PVPh). In the vibrational and NMR spectra of the blends composed of non-interacting polymers (PCL/PS) and weakly interacting polymers (PEO/PMMA), no band changes were observed which would indicate changes of the conformational structures. ¹H NMR relaxation of the PCL and PS components in the blends is the same as in the respective homopolymers similarly treated. In the blends of weakly interacting polymers (PEO/PMMA), the crystallinity of PEO is influenced by the presence of PMMA and is negligible in the blends with less than 30 wt.-% of PEO. The rotating-frame spin-lattice relaxation time for protons T^H_1p of PMMA indicates close contact of the PMMA and PEO chains. In the blends PNMLL/PVPh with strong hydrogen-bonding interactions, both components are intimately mixed on a scale of 3–4 nm and significant shifts of some bands both in vibrational and in NMR spectra reveal changes of structure.     

Effects of salt and nanoparticles on the segmental motion of poly(ethylene oxide) in its crystalline and amorphous phases: 2H and 7Li NMR studies

We use (2)H NMR to investigate the segmental motion of poly(ethylene oxide) (PEO) in neat and nanocomposite materials that do and do not contain salt. Specifically, in addition to a neat low-molecular-weight PEO, we study mixtures of this polymer with TiO 2 nanoparticles and LiClO 4. To characterize the polymer dynamics over a wide range of time scales, we combine (2)H NMR spin-lattice relaxation, line-shape, and stimulated-echo analyses. The results consistently show that the presence of nanoparticles hardly affects the behavior of the polymer, while addition of salt leads to substantial changes; e.g., it reduces the crystallinity. For neat PEO and a PEO-TiO 2 mixture, stimulated-echo spectroscopy enables measurement of rotational correlation functions for the crystalline phase. Analysis of the decays allows us to determine correlation times, to demonstrate the existence of a nonexponential relaxation, which implies a high complexity of the polymer dynamics in the crystal, and to show that the reorientation can be described as a large-angle jump. For a PEO-TiO 2-LiClO 4 mixture, we use (2)H and (7)Li NMR to study the polymer and the lithium dynamics, respectively. Analysis of the (7)Li spin-lattice relaxation reveals a high lithium ionic mobility in this nanocomposite polymer electrolyte. The (7)Li stimulated-echo decay is well described by a stretched exponential extending over about 6 orders of magnitude, indicating that a broad and continuous distribution of correlation times characterizes the fluctuations of the local lithium ionic environments.     

Epoxy resin/poly(ϵ‐caprolactone) blends cured with 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane. II. Studies by Fourier transform infrared and carbon‐13 cross‐polarization/magic‐angle spinning nuclear magnetic resonance spectroscopy

Crystalline thermosetting blends composed of 2,2′‐bis[4‐(4‐aminophenoxy)phenyl]propane‐crosslinked epoxy resin (ER) and poly(?‐caprolactone) (PCL) were investigated by means of Fourier transform infrared (FTIR) spectroscopy and high‐resolution solid‐state NMR spectroscopy. FTIR investigations indicated that there were specific intermolecular interactions between ER and PCL and that the intermolecular hydrogen‐bonding interactions were weaker than the self‐association in pure epoxy. The intermolecular hydrogen bonding was considered to be the driving force for the miscibility of the thermosetting blends. For the examination of the miscibility of the thermosetting blends at the molecular level, high‐resolution solid‐state ¹³C cross‐polarity/magic‐angle spinning (CP‐MAS) NMR spectroscopy was employed. The line width of ¹³C CP‐MAS spectra decreased with increasing PCL contents, and the chemical shift of the carbonyl carbon resonance of PCL shifted to a low field with an increasing epoxy content in the blends. The proton spin–lattice relaxation experiments in the laboratory frame showed that all the blends possessed identical, composition‐dependent relaxation times (i.e., the proton spin–lattice relaxation times in the laboratory frame), suggesting that the thermosetting blends were homogeneous on the scale of 20–30 nm in terms of the spin‐diffusion mechanism, and this was in a good agreement with the results of differential scanning calorimetry and dynamic mechanical analysis. For the examination of the miscibility of the blends at the molecular level, the behavior of the proton lattice relaxation in the rotating frame was investigated. The homogeneity of the thermosetting blends at the molecular level was quite dependent on the blend composition. The PCL‐lean ER/PCL blends (e.g., 70/30) displayed a single homogeneous amorphous phase, and the molecular chains were intimately mixed on the segmental scale. The PCL‐rich blends displayed biexponential decay in experiments concerning the proton spin–lattice relaxation times in the rotating frame, which was ascribed to amorphous and crystalline phases. In the amorphous region, the molecular chains of epoxy and PCL were intimately mixed at the molecular level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1099–1111, 2003     

Molecular dynamics study of the ferroelectric liquid crystal CI IPNOC by proton spin-lattice relaxation

Proton spin-lattice relaxation studies were carried out in the S_A and S*_C phases of the liquid crystal CI IPNOC using both conventional and fast field cycling NMR techniques. T₁ dispersion curves were obtained at two different temperatures for each mesophase covering frequencies from 10² to 3 × 10⁸ Hz. In both mesophases the T₁ data can be described assuming the presence of three different relaxation mechanisms, namely local molecular rotations, molecular self-diffusion and collective motions. The self-diffusion constant D₁ was evaluated for several temperatures and the activation energy associated with the diffusion process was obtained. The expected contribution of the soft-mode for the spin-lattice relaxation could not be separated from the contribution of other collective motions. The correlation times associated with the rotations around the molecular long axis and with the fluctuations of this axis were evaluated for both the S_A and the S*_C phases.     

Biodegradation and thermal decomposition of poly(lactic acid)-based materials reinforced by hydrophilic fillers

The effect of hydrophilic fillers (starch and wood-flour) on the degradation and decomposition of poly(lactic acid) (PLA) based materials was investigated. Biodegradation was evaluated by composting under controlled conditions in accordance with AS ISO 14855. Thermal decomposition was studied by thermogravimetry (TGA). Morphological variations during biodegradation were investigated by SEM examination. It was found that biodegradation rates of PLA/starch blends and PLA/wood-flour composites were lower than that of pure cellulose but higher than that of pure PLA. The biodegradation rate was increased from about 60% to 80% when the starch content was increased from 10% to 40% after 80 days. Both starch and wood-flour accelerated thermal decomposition of PLA, and starch exhibited a relatively stronger affect then wood-flour. The decomposition temperature of PLA was decreased about 40 °C when the filler content was increased to 40%. Small polar molecules released during thermal decomposition of starch and wood-flour were attributed to the thermal decomposition behaviours of the PLA based blends and composites and their role is further discussed in this paper.     

Multinuclear NMR studies of lead(II) soaps II. 13C and 1H studies of solid and liquid-crystalline phases

The solid and liquid-crystalline phases of two long chain lead(II) carboxylates have been studied by ¹³C and ¹H NMR spectroscopy. High resolution ¹³C NMR spectra of the solid phase of lead(II) decanoate and octadecanoate, reveal splittings of the peaks attributed to the carboxylate and adjacent methylene groups. This may result from two different environments for the carboxylate chains coordinated to the same Pb(II) ion. On going from the solid to liquid-crystalline or liquid phases, this splitting is lost, and small changes in chemical shift of the bands due to the methyl and methylene groups are observed. These are attributed to the onset of conformational disordering, and analysis of the data gives a gauche population in good agreement with that from Raman spectra and theoretical calculations. Longitudinal ¹³C relaxation times are reported. From these, and from spectral data, the -CH₃ group is seen to have different dynamics from the rest of the chain, and to retain high mobility even in the solid phase. Further information on the structural changes comes from proton NMR spectroscopy. The transverse ¹H relaxation of lead(II) decanoate shows two components, which are suggested to arise from a crystalline, and a relatively amorphous region of the compound. Study of the evolution of these as a function of temperature shows that the amorphous fraction is relatively low up to 335 K. but then increase rapidly, until at 365 K, close to the transition to the L, phase, it is 99 per cent- In parallel to these observations, changes in band shape were also observed and suggest a progressive fusion of the chains up to the temperature of this transition. The global ¹H spin-lattice relaxation was also studied as a function of temperature. and two components were observed between room temperature and approximately the tint phase transition. These are associated with populations of hydrogen nuclei with different mobilities.     

Polymorphism and dynamics of MBBA as studied by NMR

We report proton NMR experiments on the liquid crystal material N-(p-methoxybenzylidene) p-n-butylaniline (MBBA) at 100MHz in the temperature range 110-350 K. The phase diagram was investigated by means of second moment and spin-lattice relaxation measurements in order to establish connections between dynamics and phase transitions. The results show that in a slow cooling experiment, two processes contribute to the relaxation, a slow ethyl group motion together with reorientation of the methyl groups. For the glassy nematic state, as well as for the phases observed after reheating a quenched sample, only methyl rotation is observed. The correlation times of these various mechanisms were determined and the results compared with those obtained by previous NMR and dielectric analysis.     

Influence of the ratios of natural and butadiene-styrene rubbers on the viscosity of rubber blends and fragmentary mobility of macromolecules

The structural states of macromolecules of natural and butadiene-styrene rubbers in their blends were studied by evaluating the spin-lattice relaxation times of carbon nuclei. The relationship between the viscosity of rubber blends and fragmentary mobility of macromolecules was examined.