Preparation of poly(methyl methacrylate) films containing silica particle array structure from colloidal crystals

The incorporation of monodisperse, polymer-modified silica into poly(methyl metharylate) to prepare polymer films containing particle array structure was investigated. The preparation was carried out by a two-step radical polymerization for gelation and solidification. The colloidal crystallization of poly(methyl metharylate)-modified silica, in 78 nm size, in acetonitrile and successive copolymerization of methyl methacrylate and 1,2-dimethacryloylethane by UV light irradiation gave the polymer gel containing the colloidal crystal structure. The exchange of acetonitrile in the gel with methyl methacrylate and further photo-radical polymerization gave the durable polymer film composed of silica particle array.     

乳胶颗粒与硝基重氮树脂的自组装

高分子通过静电、氢键、电荷转移等的自组装 ,尤其是静电自组装已有大量报道[1] .带重氮基(Ｎ+2 )高分子 (重氮树脂 ,ＤＲ)自组装的特点是形成组装膜的弱键 ,光照下能转变为共价键 ,不稳定的膜变成稳定的膜[2 ] .乳胶颗粒的组装 ,因胶体晶体、光子晶体的进展 ,越来越受关注[3 ] ,国内也有一些评述文章[4 ,5] .就胶体晶体而言 ,用它作模板 ,几乎能制备包括无机、有机、金属、陶瓷的各种多孔材料 .自然界的蛋白石 (Ｏｐａｌｓ)是ＳｉＯ2 颗粒有序沉积物中 ,渗入水溶性硅酸盐 ,再在其中固化形成的 .按照自然形成蛋白石的模式 ,从胶体晶体复制 ,…     

Photocurable pickering emulsion for colloidal particles with structural complexity

We prepared polymeric microparticles with coordinated patches using oil-in-water emulsion droplets which were stabilized by adsorbed colloidal polystyrene (PS) latex particles. The oil phase was photocurable ethoxylated trimethylolpropane triacrylate (ETPTA), and the particle-armored oil droplets were solidified by UV irradiation within a few seconds to produce ETPTA-PS composite microparticles without disturbing the structures. Large armored emulsion drops became raspberry-like particles, while small emulsion drops with a few anchored particles were transformed into colloidal clusters with well-coordinated patches. For high-molecular-weight PS particles with low chemical affinity to the ETPTA monomer, the morphology of the patchy particle was determined by the volume of the emulsion drop and the contact angle of the emulsion interface on the PS particle surface. Meanwhile, for low-molecular-weight PS particles with high affinity, the ETPTA monomers were likely to swell the adsorbed PS particles, and distinctive morphologies were induced during the shrinkage of emulsion drops and the phase separation of ETPTA from the swollen PS particles. In addition, colloidal particles with large open windows were produced by dissolving the PS particles from the patchy particles. We observed photoluminescent emission from the patchy particles in which dye molecules were dispersed in the ETPTA phase. Finally, we used Surface Evolver simulation to predict equilibrium structures of patchy particles and estimate surface energies which are essential to understand the underlying physics.     

Facile Fabrication of Large Area Polystyrene Colloidal Crystal Monolayer via Surfactant-free Langmuir-Blodgett Technique

A facile and novel method for the production of a large area of well-ordered polystyrene(PS)colloidal crystal monolayer was established using the surfactant-free Langmuir-Blodgett(LB)technique.The hydrophobic property(film-forming ability)of PS spheres was improved by a thermo-rheology treatment before LB assembly,and a large film was obtained.In contrast to the traditional LB technique,no surfactant was needed in this method,which could eliminate the additional contamination of surfactants in the preparation process and provided the products with versatile applications in nanosphere lithography(NSL)for biosensor,surface plasmon resonance,and surface enhanced Raman spectroscopy.     

In situ Observation of the Photochromism in the Langmuir Monolayer of a Non—typical Amphiphilic Spiropyran Derivative at the Air／Water Interface

In situ photochromic process in the monolayer of aphotochromic spiropyran derivative without long alkyl chain,was investigated.The photochromism at the air/water interface under differnet surface pressures was studied by surface pressure-area isotherms,surface pressure-time curves,area-time curves and Brewster angle microscopy.Both forms of the compound were found to form monolayers at the air/water interface althouhg it does not have long alkyl chain.A large area expansion in the monolayer corresponding to a zreo^th order reaction was found at the initial stage of the UV light irradiation.A series of dynamic investigations revealed that at high pressure after phase transition in the monolayer,the surface pressure changes greatly umder alternative irradiation of UV and visible light.An obvious morphological change accompanying with the photochromism was observed in situ.     

Modification of Surface Forces by Metal Ion Adsorption

Abstract

Sorption of ions may lead to variations in interparticle forces and, thus, changes in the stability of colloidal particles. Chemical interactions between metal ions and colloidal particles modify the molecular structure of the surface, the surface charge, and the electrical potential between colloidal particles. These modifications to the surface and to the electrical double layer due to metal ion sorption are reflected in the interaction force between a particle and another surface, which is measured in this study by atomic force microscopy (AFM). Specifically, AFM is used to investigate the sorption of copper ions from aqueous solutions by silica particles. The influence of metal ion concentration and solution ionic strength on surface forces is studied under transient conditions. Results show that as the metal ion concentration is decreased, charge reversal occurs and a longer period of time is required for the system to reach equilibrium. The ionic strength has no significant effect on sorption kinetics. Furthermore, neither metal concentration nor ionic strength exhibits any effect on sorption equilibria, indicating that for the experimental conditions used in this study, the surface sites of the silica particle are fully occupied by copper ions.     

Electrorheological fluids as colloidal suspensions

An increase in suspension stress transfer by many orders of magnitude upon application of an external electric field is commonly referred to as the electrorheological response. Suspensions displaying this behavior are often composed of a nonaqueous dispersion of colloidal particles. In this review, the current understanding of the origin of electrorheology is described in the context of a fundamental discussion of the colloidal forces relevant to these suspensions. We show that many of the observed phenomena can be described in terms of colloidal and electric field induced interparticle interactions. The field induced arrangement of a suspension, where columns of particles are formed along field lines, is intimately related to its rheological response. A review of particle interaction potential energies of both colloidal and electric origin provides basic scaling relationshios useful in understanding structural alterations and leads naturally to a discussion of models of a suspension's rheological response. Poorly understood areas such as the effect of charge carriers in the continuous phase and particle size, shape and chemistry are delineated to indicate areas deserving further research.     

Fabrication, Characterization, and Surface-Enhanced Raman Activity Study of Silver Coated Gold Nanoparticulate Films

This paper reports a study on the preparation of Ag-clad Au colloidal monolayer films by a combination of colloid self-assembly and liquid phase microwave high-pressure technique. Firstly, monodisperse Au nanoparticles prepared by microwave heating method were assembled onto a quartz slide. Then, these Au colloidal particles on the quartz surface acted as seeds for growing the Ag-clad Au composite particulate films. The obtained particulate films were characterized by UV-Vis spectra and atomic force microscopy. It was found that the thickness of the shell and thus the size of particles in the composite colloidal films could be controlled by deposition of Ag on the preformed Au colloidal particle film in the microwave reaction system, and such films significantly increased the surface-enhanced Raman scattering enhancement （SERS） ability compared with Au colloidal particle films. Their strong enhancement ability may mainly stem from relatively large particle consisting of Ag cladding as well as effective coupling among particles in the Ag-clad Au particle ftlms.     

Fabrication of large scale two-dimensional colloidal crystal of polystyrene particles by an interfacial self-ordering process

Monolayer films of hexagonal close-packed polystyrene (PS) spheres were formed at the air-water interface through a self-ordering process without using Langmuir trough. The contact angle of PS particles on the surface of water was determined by an interfacial swelling method. It was found that the concentration and the nature of surfactant had an obvious influence on the arrangement of PS particles. PS suspension containing Triton X 100 (TX 100) of an appropriate concentration self-assembled into a closely packed monolayer on the surface of water. Sodium dodecyl sulfonate, an anionic surfactant, had a relative weak influence on the arrangement of pre-dried PS particles, in contrast, had an obvious effect on newly synthesized PS particles. Quantitative ultraviolet-visible (UV-vis) absorption spectrometry indicated that about 3% of the added TX 100 was adsorbed on the PS particle surface. Laser diffraction patterns on the monolayer film were used to investigate the lattice orientation. Ultraviolet-visible-near infrared (UV-vis-NIR) spectra of monolayer films of different sized PS particles displayed that the method presented here was universal for preparation of two-dimensional (2D) colloidal crystals.     

The effect of acrylic acid amount on the colloidal properties of polystyrene latex

Poly(styrene-co-acrylic acid) (St/AA) latices were prepared by using a batch soap-free emulsion copolymerisation in non-buffered medium. Polymerisation kinetics, followed by gravimetric method, revealed that increasing AA comonomer concentration was directly proportional to the copolymerisation rate, while adding AA comonomer caused a strong decrease of particle size of final St/AA latex particle without affecting the size distribution. Transmission electron microscopy indicated that the particles were monodispersed and spherical in shape irrespective of AA amount used in the investigated range. The colloidal stability of the latices was increased upon increasing the AA concentration; owing to the electrosteric stabilisation originated from AA-rich layer on the particle surface. In addition, electrophoretic mobility of formed particles versus polymerisation conversion exhibited the constancy of the surface charge density during the polymerisation process and was inferred for discussion of the polymerisation mechanism of this system.     

环烷酸钴-氯二异丁基铝催化体系相态的研究

研究了Co(naph) 2 Al(i Bu) 2 Cl催化体系的相态 .通过Tyndall效应、电镜观察和超过滤实验 ,证明了Co(naph) 2 Al(i Bu) 2 Cl催化体系在溶有丁二烯的苯溶剂中以纳米级小颗粒分散 ,在较佳配比时 ,粒径在 1～10 0nm之间 ,为胶体催化剂 ,属于高度分散的多相催化体系 .催化剂的活性位位于胶粒表面 ,催化剂颗粒是无定形的 .以较佳配比得到的催化剂颗粒较小、分布均匀 ,催化丁二烯聚合反应活性高 .归纳出胶体催化剂的制备特点为外观类似于均相催化体系 ,但是制备方法 (各组分配比、加入顺序、陈化等 )对催化活性有明显的影响 .并给出将胶体催化动力学作均相动力学近似的条件 ,在聚合反应初期 ,且单体浓度比烷基铝以及其他填加物浓度大 2～ 3数量级     

Control of gold nanoparticle aggregates by manipulation of interparticle interaction

The size of gold nanoparticle aggregates was controlled by manipulating the interparticle interaction. To manipulate the interparticle interaction of gold nanoparticles prepared by citrate reduction, we applied the substitutive adsorption of benzyl mercaptan on the particle surface in the absence of the cross-linking effect. Various experimental techniques such as UV-vis absorption spectroscopy, surface-enhanced Raman scattering, quasi-elastic light scattering, and zeta-potential measurement were used to characterize the nanoparticle aggregates. Our results suggest that the replacement of the trivalent citrate ions adsorbed on the nanoparticle surface with monovalent benzyl mercaptan ions should destabilize the particles, causing aggregation and hence the increase in the size of nanoparticle aggregates. These experimental results were successfully rationalized by the classical DLVO (Derjaguin-Landau-Vervey-Overbeek) theory that describes the interparticle interaction and colloidal stability in solution. Our findings suggest that the control of surface potential is crucial in the design of stable gold nanoparticle aggregates.     

Fabrication of binary colloidal crystals and non-close-packed structures by a sequential self-assembly method

Binary colloidal films of polystyrene (PS) spheres and silica spheres were fabricated with a sequential growth method using differently sized colloidal particles. In particular, we demonstrate the structures formed by a silica monolayer growing on top of a PS monolayer and a silica multilayer growing on top of a PS monolayer. By removal of the bottom PS layers, non-close-packed hexagonal, pentagonal, and square silica arrays were obtained at the original silica/PS interface. The possible formation mechanism of the non-close-packed structure was discussed, which may be used to explain how 3D colloidal crystals grow on patterned substrates.     

基于温敏水凝胶的可调胶体晶体制备

基于单分散胶体粒子悬浊液在温敏水凝胶表面可以形成湿润型胶体晶体的现象, 利用温敏水凝胶对水的控释作用制备了温度敏感的可调制胶体晶体. 在室温下利用提拉法在温敏水凝胶聚N-异丙基丙烯酰胺(PNIPAAm)表面制备湿润型胶体晶体膜. 由于胶体粒子的有序排列, 胶体晶体显示出一个尖锐的反射峰. 当温度上升到34 ℃以上时, 由于PNIPAAm水凝胶中的水被释放, 导致胶体晶体中粒子浓度降低, 粒子间距增加; 反射峰发生红移. 这些特性可以通过温度变化进行调制.     

Organically capped silicon nanoparticles with blue photoluminescence prepared by hydrosilylation followed by oxidation

A facile method of preparing stable blue-emitting silicon nanoparticles that are dispersible in common organic solvents is presented. Oxidation of yellow-emitting silicon nanoparticles with an organic monolayer grafted to their surface, using either UV irradiation in solution or heating in air, converted them to blue-emitting particles. The evolution of the PL spectrum and infrared absorption spectrum of the particles was followed during the oxidation process. The PL spectrum showed a decrease in the PL emission peak near 600 nm and the appearance and increase in intensity of a PL emission peak near 460 nm rather than a smooth blue shift of the emission spectrum from yellow to blue. The organic monolayer grafted to the particle surface was not degraded by this oxidation process, as demonstrated by FTIR and NMR spectroscopy. Similar results were achieved for particles with styrene, 1-octene, 1-dodecene, and 1-octadecene grafted to their surface, demonstrating that it is the silicon nanocrystal, and not the organic component, that is essential to this process. The organic monolayer allows the nanoparticles to form stable, clear colloidal dispersions in organic solvents and provides for the possibility of further chemical functionalization of the particles. Combined with previous work on organically grafted silicon nanoparticles with green through near-infrared emission, this enables the efficient and scalable preparation of stable colloidal dispersions of organically grafted silicon nanoparticles with emission spanning the entire visible spectrum.     

V（acac）3—AI（i—BU）2CI催化体系相态的研究

研究了V(acac)3-AI(i-BU)2CI催化体系的相态。通过Tyndall效应、电镜观察和超过渡实验,证明了在溶有丁二烯的甲苯溶剂中V(acac)3-AI(i-BU)2CI催化体系以小颗粒分散,粒径在1－100nm之间,为胶体催化剂,属于高度分散的多相催化体系。催化剂颗粒是无定形的,其活性中心位于胶粒表面,以较佳配比所得到的催化剂颗粒较小、分布均匀,对丁二烯聚合反应具有较高的催化活性。     

A simpler expression for Henry’s function describing the electrophoretic mobility of spherical colloids

An approximate expression for Henry’s function, describing the electrophoretic mobility of a spherical colloidal particle in the limit of low surface potentials, is developed through a physical analogy to a colloidal particle with a linearly slipping surface (i.e. satisfies the Navier slip condition). The resulting expression reproduces Henry’s function with a relative error of no more than 0.1%. This approach is generalized for the electrophoretic mobility of a particle regardless of surface potential though necessary data for rigorous testing is lacking.     

Control of particle assisted wetting by an external magnetic field

It is shown that repulsive particles can assist wetting of a water surface by an organic liquid even at a particle density substantially less than a close packed monolayer. By applying external fields, one can change the interparticle interactions from net attractive to net repulsive and thus induce a transition from nonwetting to wetting conditions. This was achieved by applying superparamagnetic polystyrene particles together with a polymerizable organic liquid (trimethylolpropane trimethacrylate) to a water surface in the middle of a solenoid. Passing a current through the solenoid created a magnetic field perpendicular to the interface that polarized the particles and induced repulsive dipole-dipole forces. Without the field, lenses of the organic liquid that included aggregates of particles floating on the water surface were observed. In the presence of the field, the organic liquid and the particles were evenly distributed across the surface. The interparticle distance increases proportional to the square root of the area per particle and is close to the value expected for hexagonal order.     

Influence of intense pulsed laser irradiation on optical and morphological properties of gold nanoparticle aggregates produced by surface acid-base reactions

Gold nanoparticles were surface modified with an ionizable and pH-sensitive monolayer of thiobarbituric acid (TBA). By variation of the pH value of the solution, nanoparticle aggregates can be produced in a controlled way. The aggregates thus prepared were irradiated with an intense pulsed laser at 532 nm. The products in solution were examined by transmission electron microscopy (TEM) and optical absorption spectroscopy. The TEM images of the products revealed that the nanoparticle aggregates dissociate upon laser irradiation and form much smaller gold nanoparticles. The optical absorption spectra measured simultaneously show the gradual disappearance of the absorbance band of the aggregates at around 680 nm. Additionally, a blue shift (from 534 to 524 nm) of the resonance absorbance corresponding to isolated nanoparticles has been observed. All the observations suggest that the colloidal solution becomes more stable after laser irradiation. Both the reduced nanoparticle size and the stabilizing TBA ligands present on the particle surface contribute to the acquired stability of the colloidal solutions.     

胶体刻蚀——纳米结构化表面的构筑与应用

综述了近年来胶体刻蚀领域的研究进展, 分别讨论了基于胶体微粒和胶体晶体为模板的可控沉积与可控刻蚀及在固体平面基质、曲面基质和气液界面等不同基质上构筑结构化表面的方法. 同时还探讨了利用胶体刻蚀方法形成的微纳结构在光、电、磁以及表面润湿和生物学等方面的应用.