Synergistic effects of novolac-based char former with a phosphorus/nitrogen-containing flame retardant in polyamide 6

The synergistic effect of phosphorus oxynitride（PON） with a novolac-based char former modified by salification （NA-metal salt） on the flame retardance of polyamide 6（PA6） was investigated.For this purpose,various flame-retardant PA6 systems were melt-compounded with PON,PON/NA,PON/NA-V₂O₅ and PON/NA-Fe₂O₃,and their flame retardance was evaluated by measuring the limiting oxygen index（LOI） values and UL-94 vertical burning ratings.The results showed that,compared with the PA6/PON/NA system,the combination of two char formers（NA-V₂O₅,NA-Fe₂O₃） with PON could obviously improve the char formation and flame retardance of PA6.The flame retardance and cone calorimetric analyses showed the stronger synergism as well as the better flame retardant performance of PON/NA-Fe₂O₃ flame retardant system. The effects of different char formers on the flame retardance and thermal stability of this system were also discussed.     

阻燃及可瓷化硅橡胶成炭结构的研究进展

简单介绍了硅橡胶的阻燃和瓷化机理。依据阻燃剂、填料及炭层结构的不同,将硅橡胶分为阻燃和可瓷化两大类.综述了阻燃硅橡胶和可瓷化硅橡胶的阻燃性能和成炭结构的研究进展。分析表明:添加物理或化学膨胀型阻燃剂的硅橡胶,燃烧过程中形成的炭层疏松多孔,阻燃隔热性能优异,但炭层强度差;添加非膨胀型阻燃剂的硅橡胶,炭层结构相对密实,但表面不平整,存在孔洞和裂缝,阻燃效果不好;添加可瓷化填料的硅橡胶燃烧形成的陶瓷炭层坚硬而致密,具有优异的耐火持久性,但在隔绝热量方面不如膨胀炭层。炭层的疏松隔热与坚固耐久兼顾是阻燃硅橡胶未来可能的发展方向。     

次磷酸铝协同硼酸锌阻燃聚乙烯

以次磷酸铝(AHP)和硼酸锌(ZB)为复合阻燃剂,通过熔融共混法制备了阻燃聚乙烯(PE)材料,研究了AHP和ZB对PE的协同阻燃效应。 结果表明,AHP、ZB阻燃剂在PE基体中分散均匀;添加质量分数为25%AHP阻燃剂,PE材料的极限氧指数值(LOI)提升至25%,通过垂直燃烧测试(UL-94(3.2 mm))V-2级,显示出良好的阻燃效果;引入ZB后,材料LOI值呈先升高后下降趋势,在m(AHP):m(ZB)=21:4时,出现峰值,达到27.2%,并通过UL-94(3.2 mm)V-1级;热失重分析(TGA)结果显示,AHP、ZB阻燃剂能同时提高PE材料的热稳定性和成炭率,当m(AHP):m(ZB)=17:8时,残渣率达到25.7%。     

聚磷酸酯阻燃剂复配聚磷酸铵对环氧树脂阻燃性能的影响

合成了一种9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)的衍生物——聚苯氧基磷酸-2-10-氢-9-氧杂-磷杂菲基对苯二酚酯(POPP), 以间苯二胺(m-PDA)为固化剂, 环氧树脂(EP)为基料, POPP为阻燃剂, 复配聚磷酸铵(APP), 制备了不同磷含量的阻燃环氧树脂. 利用极限氧指数(LOI)和垂直燃烧(UL94)实验表征了环氧树脂的阻燃性能; 以热重分析、 锥型量热和扫描电镜分析了阻燃环氧树脂的热性能和表面形态. 研究结果表明, 阻燃剂总加入量(质量分数)为5%时即可达到UL94 V-0级, 同时LOI值为27.7%; 当总加入量为15%, 即w_POPP=5%, w_APP=10 %时, 其LOI值可达到33.8%. 随着磷含量的增加, 阻燃环氧树脂的初始降解温度略有降低, 但高温下的残炭率明显增加. POPP/APP的加入在很大程度上降低了环氧树脂的热释放速率、 有效燃烧热、 烟释放量和有毒气体释放量. 阻燃环氧树脂在高温下形成比较稳定的致密膨胀炭层, 为底层的环氧树脂主体隔绝了分解产物及热量和氧气交换, 增强了高温下的热稳定性.     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

The investigation of intumescent flame-retarded ABS using zinc borate as synergist

The influence of zinc borate (ZB) on the flammability and thermal properties of acrylonitrile–butadiene–styrene copolymer (ABS)/ammonium polyphosphate (APP)/poly(p-ethylene terephthalamide) (PETA) system was investigated. When the loadings of ABS, APP, PETA, and ZB were 70, 20.8, 6.9, and 2.3 %, respectively, the LOI value reached 36 and UL-94 vertical burning test was V-0. Even when 1.5 % ZB was added into ABS/APP/PETA (80/13.9/4.6) system, the LOI value was also 27. The thermal degradation of the composites was investigated by means of thermogravimetric analysis (TG) and Fourier transform infrared spectroscopy (FTIR). The TG indicated that the addition of ZB improved the thermal stability and the char residue of the ABS/APP/PETA system. What’s more, the mechanism was investigated by FTIR. The spectrum of flame retardant residue suggested that ZB reacted with APP/PETA physically. Additionally, scanning electron microscopy showed that the surface of intumescent charred layer obtained after combustion of ABS/APP/PETA/ZB (70/20.8/6.9/2.3) was compact and thick.     

Hugely enhanced flame retardancy and smoke suppression properties of UHMWPE composites with silicone‐coated expandable graphite

In this paper, silicone‐coated intumescent flame retardants was prepared by an efficient and simple approach, aiming at enhancing the flame‐retardant efficiency and smoke suppression properties. The surface of expandable graphite (EG) was treated prior to the coverage of nonflammable silicone. The resultant silicone‐modified EG hybrid (SEG) was combined with ammonium polyphosphate (APP) and applied as a flame‐retardant and smoke‐suppressant for ultrahigh molecular weight polyethylene (UHMWPE). Compared with UHMWPE/APP/EG (with 15 wt% APP/EG), UHMWPE/APP/SEG (with 15 wt% APP/SEG) gives decrement by 18.5% in the peaks of the heat release rate, 6.33% in total heat release and 13.6% in total smoke release, whereas increment by 23% in tensile strength and 12.1% in elongation at break, respectively. It is suggested that the introduction of silicone on the surface of EG can improve the interfacial compatibility between EG and UHMWPE. Moreover, it can lead to forming more char residue and reducing the release of smoke particulates during combustion process of the composites.     

An efficient halogen-free flame retardant for glass-fibre-reinforced poly(butylene terephthalate)

Compared with poly(butylene terephthalate) (PBT), glass-fibre-reinforced poly(butylene terephthalate) (GF-PBT) is difficult to flame retard with halogen-free flame retardants. In the present study, the aluminium salt of hypophosphorous acid (AP) was used as a flame retardant for GF-PBT. A series of flame-retardant GF-PBT composites was prepared via melt compounding. The flame retardance and combustion behaviour of the composites were studied by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimetric test. Thermal behaviours and thermal decomposition kinetics were investigated by thermogravimetric analysis (TGA) under N₂ atmosphere. The addition of AP to the composites could result in an increased LOI value, a UL-94 V-0 (1.6 mm) classification and a better fire performance in cone calorimetric tests. The char morphology observation after flame-retardant tests, calculation of decomposition kinetics, X-ray photoelectron spectroscopy (XPS) and infra-red spectral analysis of the char residue confirmed the condensed-phase flame-retardant mechanism. Furthermore, the mechanical properties of the flame-retardant composites were not deteriorated, retaining an acceptable level.     

Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A new triazine polymer was synthesized by using cyanuric chloride, ethanolamine and ethylenediamine as raw materials. It is used both as a charring agent and as a foaming agent in intumescent flame retardants, designated as charring-foaming agent (CFA). Effect of CFA on flame retardancy, thermal degradation and mechanical properties of intumescent flame retardant polypropylene (PP) system (IFR-PP system) has been investigated. The results demonstrated that the intumescent flame retardant (IFR) consisting of CFA, APP and Zeolite 4A is very effective in flame retardancy of PP. It was found that when the weight ratio of CFA to APP is 1:2, that is, the components of the IFR are 64 wt% APP, 32 wt% CFA and 4 wt% Zeolite 4A, the IFR presents the most effective flame retardancy in PP systems. LOI value of IFR-PP reaches 37.0, when the IFR loading is 25 wt% in PP. It was also found that when the IFR loading is only 18 wt% in PP, the flame retardancy of IFR-PP can still pass V-0 rating, and its LOI value reaches 30.2. TGA data obtained in pure nitrogen demonstrated that CFA has a good ability of char formation itself, and CFA shows a high initial temperature of the thermal degradation. The char residue of CFA can reach 35.7 wt% at 700 °C. APP could effectively promote the char formation of the APP-CFA system. The char residue reaches 39.7 wt% at 700 °C, while it is 19.5% based on calculation. The IFR can change the thermal degradation behaviour of PP, enhance T_max of the decomposition peak of PP, and promote PP to form char, based upon the results of the calculation and the experiment. This is attributed to the fact that endothermic reactions took place in IFR charring process and the char layer formed by IFR prevented heat from transferring into inside of IFR-PP system. TGA results further explained the effective flame retardancy of the IFR containing CFA.     

高密度聚乙烯/蒙脱土纳米复合材料膨胀阻燃体系的性能

使用以乙烯/醋酸乙烯共聚物(EVA)为相容剂的高密度聚乙烯/蒙脱土(HDPE/OMT)纳米复合材料作为基体,制备了含不同成炭剂的聚磷酸铵(APP)膨胀阻燃体系,对其阻燃性能进行了比较和研究,并分析了蒙脱土与膨胀阻燃剂协效作用的机理。热重分析(TGA)、垂直燃烧(UL-94)、极限氧指数(LOI)、锥形量热计结果表明:APP/季戊四醇(PER)体系熔融过程较短可形成蒙脱土增强炭层;PER/PA/OMT体系中较高的有机物含量有利于蒙脱土迁移和堆积。     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of a novel phosphorus‐containing organosilicon and its effect on the flame retardant and smoke suppression of polyethylene terephthalate

A novel phosphorus‐containing silicone flame retardant (PDPSI) was prepared by Mannish reaction, and a series of PDPSI/PET composites were prepared by melt blending method. The nuclear magnetic resonance (¹H NMR), Fourier transformation infrared (FTIR), and the thermogravimetric analyzer (TGA) results indicated that PDPSI showed network structure and owned good thermal stability, with the char residue of 62.2% at 800°C. The flame retardancy of PDPSI/PET composites was characterized by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter (CCT). The results revealed that the addition amount of PDPSI was 5%, the LOI value of PDPSI/PET composites increased to 27.3%, and UL‐94 test passed V‐0 rating. When the PDPSI loading was 3%, PET composites showed excellent flame retardancy and smoke suppression, with a decrease in the peak heat release rate (PHRR) by 71.19% and the total smoke release (TSP) reduced from 14.4 to 11.1m². The scanning electron microscopy (SEM) and FTIR results of char residue demonstrated that the flame‐retardant mechanism of PDPSI was solid phase flame retardant. PDPSI catalyzed the aromatization reaction of PET to promote the formation of a dense and continuous carbon layer, finally improving the flame retardancy and smoke suppression properties of PET.     

A novel intumescent flame‐retardant LDPE system and its thermo‐oxidative degradation and flame‐retardant mechanisms

A carbonization agent, 3,9‐di (2‐hydroxyisopropyl)‐2,4,8,10‐tetraoxa‐3,9‐diphosphaspiro‐[5,5]‐undecane (SPEPO), was synthesized from pentaerythritol (PER), phosphorus trichloride, formic acid, and acetone as raw materials. The structure of SPEPO was characterized by FTIR and ¹H‐NMR. As a carbonization agent and an acid source, SPEPO can form a novel intumescent flame‐retardant (IFR) system for low density polyethylene (LDPE) together with ammonium polyphosphate (APP) and melamine phosphate (MP). The flame retardancy and thermal behavior of the IFR system for LDPE were investigated by limiting oxygen index (LOI), UL‐94 test, and thermogravimetric analysis (TGA). When the weight ratio of SPEPO, APP, and MP is 7:7:1 and their total loading level is 30%, the IFR‐LDPE presents the optimal flame retardancy (LOI value of 27.6 and UL‐94 V‐0 rating). However, SPEPO, APP, or MP can only show a very poor flame‐retardant performance when used alone. This indicates that there is a synergistic effect among SPEPO, APP, and MP. TGA results obtained in air demonstrate that SPEPO has an ability of char formation itself, and the char residue of SPEPO can reach 24 wt% at 700°C. The IFR can change the thermal degradation behavior of LDPE, enhance T_max of the decomposition peak of LDPE, and promote LDPE to form char based on the calculated and the experimental data of residues. According to the results of Py‐GC/MS in combination with FTIR of the char residues at different temperatures, a possible flame‐retardant mechanism has been proposed. Copyright © 2008 John Wiley & Sons, Ltd.     

新型膨胀阻燃剂的合成及其在涤纶织物中的应用

氧氯化磷与季戊四醇反应制得双氯螺磷(2);2与三乙醇胺反应合成了新聚合物1,其结构与性能经1H NMR,IR,TG和SEM表征。研究结果表明,1自身具有很好的成炭性,对涤纶织物具有很好的阻燃效果,扩展了涤纶的分解温度范围;通过SEM对经1整理的织物残炭形貌进行分析,证实1是膨胀型的阻燃剂。     

Synthesis of a triazine-based macromolecular hybrid charring agent containing zinc borate and its flame retardancy and thermal properties in polypropylene

Abstract

A triazine-based macromolecular hybrid charring agent containing zinc borate (MCA-K-ZB) was synthesized and combined with ammonium polyphosphate (APP) to improve the flame retardancy of polypropylene (PP). The flame retardancy and thermal properties of PP composites were investigated using limited oxygen index, vertical burning test, and thermogravimetric analysis. The results showed APP/MCA-K-ZB can improve the flame retardancy of PP compared with APP/MCA-K/ZB. The morphology of the char residues was investigated by scanning electron microscopy (SEM). The SEM result shows that MCA-K-ZB can improve the compactness and continuity of char residue compared with MCA-K/ZB, therefore improving the flame retardancy of PP composites.     

Towards the development of thermally latent novolac-based char formers for ABS resins

Novel novolac-based char formers for ABS resins, [PN-PI], [PN-BPI], [CN-PI] and [CN-BPI], were prepared from phenol formaldehyde novolac (PN), cresol formaldehyde novolac (CN), phenyl isocyanate (PI), and 4-biphenyl isocyanate (BPI) via a simple urethane-forming reaction. The four compounds were used as thermally latent char formers for this study. Thus, a two component system employing novolac-isocyanate adduct as a char former, and tetra-2,6-dimethyl phenyl-resorcinol diphosphate (DMP-RDP) as a phosphorous-based flame retardant was blended with ABS, and the thermal degradation behaviour and flame retardancy were determined by thermogravimetric analysis (TGA) and LOI test. The mixtures show a synergistic effect between DMP-RDP and novolac-isocyanate adduct on the flame retardance enhancement of ABS. Those containing higher molar mass CN-BPI adduct are found to be most flame retardant, and a LOI value as high as 35 is obtained.     

Synergistic flame‐retardant effect and mechanisms of boron/phosphorus compounds on epoxy resins

To explore the component synergistic effect of boron/phosphorus compounds in epoxy resin (EP), 3 typical boron compounds, zinc borate (ZB), boron phosphate (BPO₄), and boron oxide (B₂O₃), blended with phosphaphenanthrene compound TAD were incorporated into EP, respectively. All 3 boron/phosphorus compound systems inhibited heat release and increased residue yields and exerted smoke suppression effect. Among 3 boron/phosphorus compound systems, B₂O₃/TAD system brought best flame‐retardant effect to epoxy thermosets in improving the UL94 classification of EP composites and also reducing heat release most efficiently during combustion. B₂O₃ can interact with epoxy matrix and enhance the charring quantity and quality, resulting in obvious condensed‐phase flame‐retardant effect. The combination of condensed‐phase flame‐retardant effect from B₂O₃ and the gaseous‐phase flame‐retardant effect from TAD effectively optimized the action distribution between gaseous and condensed phases. Therefore, B₂O₃/TAD system generated component synergistic flame‐retardant effect in epoxy thermosets.     

Effect of a novel flame retardant containing silicon and nitrogen on the thermal stability and flame retardancy of polycarbonate

A novel flame retardant (PSiN), containing silicon and nitrogen, was synthesized using N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane and diphenylsilanediol through solution polycondensation and it was added to polycarbonate (PC). The structure and thermal properties of PSiN were characterized by fourier transform infrared spectroscopy and thermogravimetric analysis (TG) tests. The effect of PSiN on the flame retardancy and thermal behaviors of PC was investigated by limited oxygen index (LOI), vertical burning test (UL-94), and TG tests. The results showed that the flame retardancy and the thermal stability of PC are improved with the addition of PSiN. When 1 mass% PSiN and 0.5 mass% diphenylsulfone sulfonate (KSS) are incorporated, the LOI value of PC is found to be 46, and class V-0 of UL-94 test is passed. The char structure observed by scanning electron microscopy indicated that the surface of the char for PC/KSS/PSiN system holds a firmer and denser char structure when compared with neat PC and PC/KSS system.     

Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardant

For the sake of improving the flame retardancy of epoxy resin (EP), a novel phosphorus‐containing phenolic resin (PPR) synthesized in our group instead of conventional phenolic resin (PR) was used to cure EP in the present research. The curing processes and the corresponding crosslinking structure and mechanical performance were investigated by differential scanning calorimeter and dynamic mechanical thermal analysis. Because of the introduction of flame‐retarding elements including P and Si, PPR exhibited higher charring capacity in the condensed phase, which is helpful to construct a char layer of higher quality. Correspondingly, PPR‐cured EP displayed remarkably improved flame retardance as compared to conventional PR‐cured EP through the related evaluations including limiting oxygen index, vertical burning test, and microscale combustion colorimeter. As a multifunction agent, it is believable that PPR possesses potential commercial value to prepare flame‐retardant EP with high performance.     

Studies of silicon-containing maleimide polymers: 1. Synthesis and characteristics of model compounds

A series of the (N-maleimido phenoxy)silane monomers were synthesized by a two-step reaction for using as the application of flame retardant, functional modifier, or a photoresist material in deep-UV region. All of the monomers with maleimide ring were polymerized by radical polymerization in toluene solution using 2,2′-azobisisobutyronitrile (AIBN) as initiator so as to prepare homopolymers. The structures of the maleimide monomers were identified by ¹H, ¹³C, ²⁹Si NMR and element analysis. The chemical structures of polymers were identified by Fourier transform infrared reflection (FT-IR) spectroscopy. The molecular weight distributions of polymers were measured by gel permeation chromatography (GPC) equipment. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to analyze the thermal properties of the polymers. The degree of polymerization in silicon-containing maleimide polymers should be affected by side chains. The introduction of alkylsilane into a side chain of maleimide polymer may reduce the glass transition temperature (T_g) and thermal stability, but increase char yield of solid residue as an excellent flame retardant.