聚乙烯光引发交联过程中的表面光氧化和光稳定

通过测定凝胶含量并利用红外-光声光谱和光电子能谱对光交联聚乙烯表面氧化程度和氧化产物进行了研究.结果表明,聚乙烯光交联过程中随着光照时间的增加,表面光氧化加剧,氧化产物主要是氢过氧化物和含羰基的化合物.考察了预辐照和添加受阻胺型光稳定剂对聚乙烯光交联过程的影响,发现这两种方法都能有效地降低光交联聚乙烯(XLPE)的表面氧化,但有些光稳定剂会降低XLPE的交联度.     

The efficacy of photostabilizers on the color change of wood filled plastic composites

In this study, we compared the performance of different hindered amine light stabilizers and ultraviolet absorbers as photostabilizers of wood plastic composites (WPC). We showed how their functional groups and molecular weights influence the photostabilization of WPC subjected to natural weathering for 2000 h. The changes were followed using color measurements and FTIR spectroscopy which provided insight into the photodegradation mechanism of weathered WPC.The results indicate that weathering causes color fading and changes in yellowing. We propose that WPC undergo two competing redox reactions upon UV exposure. The first is the oxidation of lignin which leads to the formation of paraquinone chromophoric structures which is dominant in the first 250 h of exposure. The second is the reduction of the paraquinone structures to hydroquinones which leads to photobleaching.High molecular weight diester HALS were found to be the most effective in controlling long term fading and yellowing changes. Furthermore, the addition of a benzotriazole ultraviolet absorber shows great synergism in controlling fading when added to a diester HALS.     

聚合物涂层光稳定化研究进展

用于改造各种材料的表面性质并防止其光老化的聚合物涂层的光稳定化技术近年来已经成为高分子材料科学和光化学领域的又一研究热点。本文以紫外光固化聚合物涂层为重点综述了该研究领域的发展过程、理论研究特点和应用技术的生长点,并对聚合物涂层光稳定化技术的最新进展进行了评述,讨论了聚合物涂层光稳定化技术中新型光固化树脂,多功能单体、光引发剂和光稳定剂（包括紫外吸收剂和受阻胺类稳定剂）的特点及作用机理。     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Calorimetric indication of the molten globule-like state of cytochrome c induced by n-alkyl sulfates at low concentrations

The molten globule state has been proposed as a major intermediate of protein folding. However it has proven difficult to obtain thermodynamic data characterizing this state. To explore an alternative approach for characterization of the molten globule state, n-alkyl sulfates induced formation of the molten globule state of horse cytochrome c at pH 2 was studied by isothermal titration calorimetry (ITC). Titration of the acid unfolded state of cytochrome c with sodium octyl sulfate, sodium dodecyl sulfate or sodium tetradecyl sulfate, generated an exothermic reaction for formation of the molten globule state. The effects of various n-alkyl sulfates on the acid unfolded state of cytochrome c demonstrated that the increased alkyl chain length enhanced the exothermic values of calorimetric enthalpy and induced a more compact molten globule states. The heat contents agreed well with the conformational transition measured by molar ellipticity at 222 nm ([θ]₂₂₂) and Stoke radius (Rs) values. These results emphasize that isothermal titration calorimetry provides a reasonable alternative method for characterization of the molten globule state.     

Evaluation of Schiff bases of 2,5-dimercapto-1,3,4-thiadiazole as photostabilizer for poly(methyl methacrylate)

The photostabilization of poly(methyl methacrylate) (PMMA) films by Schiff bases of 2,5-dimercapto-1,3,4-thiadiazole compounds was investigated. The PMMA films containing concentration of complexes 0.5% by weight were produced by the casting method from chloroform solvent. The photostabilization activities of these compounds were determined by monitoring the hydroxyl index with irradiation time. The changes in viscosity average molecular weight of PMMA with irradiation time were also tracked (using benzene as a solvent). The quantum yield of the chain scission (Φ_cs) of these complexes in PMMA films was evaluated and found to range between 4.19 × 10^?5 and 8.75 × 10^?5. Results obtained showed that the rate of photostabilization of PMMA in the presence of the additive followed the trend:[1] > [2] > [3] > [4] > [5].According to the experimental results obtained, several mechanisms were suggested depending on the structure of the additive. Among them, UV absorption, peroxide decomposer, and radical scavenger for photostabilizer mechanisms were suggested.     

Surface-Anchored Hindered-Amine Light Stabilizers for Improved UV Stability of Polyolefins

Abstract

Hindered-amine light stabilizers (HALS) were surface anchored to polyolefin films by reacting the HALS, namely, 1,2,2,6,6-pentamethyl-4-piperidinol and 1,2,2,6,6-pentamethyl-4-aminopiperidine, with succinic anhydride functionalized polyolefin surfaces. The photostability of polyolefin films with surface-anchored HALS were compared with films stabilized with commercial HALS (Tinuvin 770) by melt blending. It is shown that the photostabilizing efficiency of surface-anchored HALS is superior that of melt-blended polyolefins.     

Bulk and surface structures of V2O5/ZrO2 catalysts for n-butane oxidative dehydrogenation

The present investigation focuses on the structural properties and reactivity of zirconia-supported vanadium oxide catalysts, prepared by equilibrium adsorption in basic (pH 10) or in acid (pH 2.7) conditions with vanadium content up to 6 wt.% (pH 10) and up to 11.6 wt.% (pH 2.7). The samples, heated at 823 K for 5 h in air, were characterized by X-ray diffraction, Raman spectroscopy and TPR, both as prepared and after leaching with an ammonia solution to remove species not anchored to the zirconia surface. Some representative samples were also tested for the n-butane oxidative dehydrogenation (ODH) reaction. Depending on vanadium content, various vanadium species were identified by Raman spectroscopy that reacted differently on exposure to H₂. At similar loading, the fraction of vanadium in a dispersed state and thus interacting with the support was higher in samples prepared at pH 10 than in those at pH 2.7. Samples prepared at pH 2.7 contained a higher fraction of large polymeric structures in addition to ZrV₂O₇ and V₂O₅.In line with literature data for propane ODH on similar catalysts, our catalytic results suggested that the active sites for the ODH reaction are associated with the V–O–V bonds of the polymeric exposed structures, whereas the Zr–O–V sites favour alkane combustion.     

Effect of sodium bicarbonate and sodium chloride on protein conformation and gel properties of pork myofibrillar protein

To explore the potential of using sodium bicarbonate to take the place of sodium chloride, the changes in endogenous fluorescence, ultraviolet absorption spectrum, water holding capacity, gel properties and water distribution of pork myofibrillar protein were investigated. Because of the increase in pH and the exposure of more tryptophan and tyrosine residues with increasing sodium bicarbonate, the cooking yield and gel strength of pork myofibrillar protein significantly increased (P < 0.05), and centrifugal loss significantly decreased (P < 0.05). Meanwhile, the colour of the cooked pork myofibrillar protein was darker with increasing sodium bicarbonate, the bound water and immobile water were bound more tightly to the protein matrix, and the mobility of the water was lower, except for in the sample with 0.4 % sodium bicarbonate. Moreover, free water significantly increased (P < 0.05) when 0.4 % sodium bicarbonate was added, indicating that the mobility of the water was enhanced. Overall, the use of sodium bicarbonate could induce the protein conformation change, and improve the bond water content and texture properties of reduced-salt pork myofibrillar protein.     

Dielectric polarization of cross-linked poly(ethylene oxide)—phenomenology

Results of dielectric relaxation studies will be discussed. It turns out that competition of electric and structural relaxation coins permittivity and as a result conductivity mechanism at low temperature. It dominates long-ranging relaxation in the molten state. In the opposite limit of temperature, cross-linked poly(ethylene oxide) (PEO) with low mesh size can be transferred into super-cooled liquid state. Then, PEO behaves like a hydrogen-bonded liquid since crystallization is strongly suppressed. As a result, one observes slow Debye-like relaxation at low temperature. Beyond the low-frequency region, there appears an extended region between crossings of impedance components, where Z′ ≈ Z″ at acceptable approximation. It is coined by damped oscillation under action of the electric field. These effects lessen with increasing mesh size of the sample as clearly shown by M″(ω) spectra. The dipole moment of the PEO samples in molten state decreases only slightly with increasing mesh size.     

Preparation of aqueous crosslinked dispersions of functionalized poly(d,l-lactic acid) with a thermomechanical method

Aqueous crosslinked microparticle dispersions were prepared from a copolymer of d,l-lactic acid, 1,4-butanediol, and itaconic acid with a thermomechanical method. The copolymer was prepared in one step polycondensation reaction using Sn(Oct)₂ as a catalyst. A polymer with M_n of 2800 g mol^?1 and a molecular weight distribution of 1.41 was obtained (as determined by SEC), that contained double bonds introduced by the itaconic acid monomer units (6 mol-%, as determined by NMR). Crosslinking ability of the prepared copolymer was demonstrated in bulk by adding a thermal initiator and altering amounts of ethylene glycol dimethacrylate (EGDMA) crosslinking agent into molten polymer at 60–150 °C. A crosslinked gel was formed in less than 15 min at 80 °C when 10 wt.% of EGDMA was added and benzoyl peroxide (BPO) was used as the initiator. Aqueous dispersions were prepared of the non-crosslinked copolymer with a thermomechanical method that involved slow addition of aqueous polyvinyl alcohol (PVA) solution into molten copolymer at 60 °C under shear. Dispersions were prepared with 10 wt.% of EGDMA and 2 wt.% of BPO. Crosslinking of the dispersed microparticles was achieved by heating the dispersions at 80 °C for 30 or 60 min. The dispersions were characterized by SEM, DSC, TGA, FT-IR, solid state NMR, and gel content measurements. The effect of crosslinking was clearly seen in SEM images of films cast from the dispersions. The films cast from non-crosslinked dispersions had smooth morphology whereas in films cast from crosslinked dispersions separate spherical particles were observed. During the crosslinking reactions, glass transition temperatures increased (as determined by DSC), thermal stability of the samples increased (as determined by TGA), and the gel content of the samples increased.     

UV photodegradation of polypropylene thick bars containing rutile-type TiO2 nanorods

Surface modified rutile-type titanium dioxide （CST） nanorods were used as a UV absorber in polypropylene （PP） thick bars in combination with the hindered amine light stabilizer （HALS） Chimassorb 944 （C944）. For all of the tested samples, the photodegradation was mainly limited in the region near the exposed surface, as proved by the carbonyl index and molecular weight. Compared with the typical HALS photostabilization system containing organic hindered phenol UV absorber Tinuvin~ 328 （T328）, the thickness of photodegradation region for PP/C944/CST was only a quarter to that for PP/C944 and PP/C944/T328, while the rates of reduction in molecular weight and increase in carbonyl index were much lower. Optical microscopic observation showed that the evolution of surface micro-cracks in PP/C944/CST was quite different from that in the other samples, while scanning electronic micrographs revealed that the depth of the micro-cracks in PP/C944/CST was much shorter than that in the others. It is therefore concluded that the protection of CST on PP thick bars is mainly attributed to the outstanding UV-shielding and cracks-blocking abilities.     

Spectroscopic investigation of the interaction of p-benzoquinone with casein in the solid state

The reaction between p-benzoquinone (PBQ) and casein (protein) in the solid state was studied. After reaction with protein, the FT-IR spectra showed a new band at 1215 cm^?1, with an intense sign attributed for casein/PBQ product. An optimum amount of PBQ for determination of the product when mixed with casein was 100 mg and a reaction time of 30 min. The product was stable for a period of 24 h after the reacting by heating. The interaction of PBQ with casein was investigated by FT-IR, reflectance, Raman and EPR spectroscopies. The reaction between PBQ and casein in the solid state yields a radical species (p-benzosemiquinone) that it is stabilized by the presence of p-biphenolate and p-benzoquinone species in the solid state.     

A gold-based nanobeacon probe for fluorescence sensing of organophosphorus pesticides

A nanomaterials-based novel molecular beacon has attracted growing attentions in fluorescent assays as many nanomaterials possess excellent quenching efficiency. In this work, a gold-based nanobeacon probe was established to detect organophosphorus pesticides for the first time. The constructed gold-based nanobeacon acted as a signal indicator and could display the decreasing of the intensity in the presence of targets, which competitively bound to single strand DNA. To achieve a high sensitive probe, some parameters including solution pH, temperature and reaction time were investigated and optimized. The gold-based nanobeacon probe assay was proved to be rapid and sensitive to achieve a detection limit of 0.035 μM for isocarbophos, 0.134 μM for profenofos, 0.384 μM for phorate and 2.35 μM for omethoate, respectively. The prepared nanobeacon effectively reduced the background and improved the detection sensitivity and selectivity. The probe is stable, easy to operate and does not need sophisticated instruments. These features makes the probe feasible for screening trace organophosphorus pesticides in real samples.     

High immobilization of antibacterial moieties onto monodisperse microspheres by dispersion polymerization using bicationic viologen surfmer

In order to achieve monodisperse particles with high content of antibacterial groups covalently bonded on surface, a bicationic viologen,N-hexyl-N’-(4-vinylbenzyl)-4,4’-bipyridinium bromide chloride(HW) was devised as a surfmer in dispersion polymerization of styrene(St) using a mixture of methanol(or ethylene glycol) and water as media.Effects of content of HW,its addition profile and composition of reaction media on particles size and incorporation of HW moieties were mainly investigated.The attachment of silver and gold nanoparticles on particle surface under UV irradiation ascertained the surface-bonded HW segments.SEM,TEM observations and XPS,zata potential measurements indicated that increase of initial HW contents and addition of HW(when polymerization had been performed for 3 h) led to grown particles and enhanced immobilization of HW moieties.Using a mixture of ethylene glycol and water as reaction media, small particles(520-142 nm) with highly attached HW moieties were prepared.Furthermore,antibacterial efficacy of the resultant particles against S.aureus was assayed,and particles with more HW moieties anchored on surface demonstrated greater efficiency of antibacterial activity.     

Chemical modification of expanded glass aggregate with N-Benzoyl-N′-(4-methylphenyl) thiourea (TTU) for the adsorptive removal of Cr(III) ion

In this study, the silylant agent 3-aminopropyl trimethoxysilane (APTES) was anchored on expanded glass aggregate (GA) to prepare a new adsorbent. N-Benzoyl-N′-(4-methylphenyl) thiourea (TTU) bonded to amino-functionalized GA adsorbent with reflux. Developed adsorbent (GA-APTES-TTU) was characterized using thermal analysis (TGA) and scanning electron microscopy (SEM). TGA and SEM studies indicated that modification of the glass aggregate (GA) surfaces was successfully performed. The adsorption studies exhibited that the GA-APTES-TTU could be efficiently used for the removal of Cr(III) from aqueous solutions. The effects of pH, adsorbent dosage, ion concentration, time, and temperature were investigated as adsorption parameters. The maximum removal of Cr(III) was observed at pH 4. The adsorption equilibrium was achieved in 120 min and adsorption of Cr(III) followed the Langmuir isotherm model. The maximum adsorption capacity for Cr(III) was 0.4305 mmol/g with GA-APTES-TTU. Thermodynamic parameters such as the standard free energy (ΔG^o), enthalpy change (ΔH°) and entropy change (ΔS°) were calculated in order to explain the mechanism of adsorption process. The thermodynamic data showed that Cr(III) adsorption was spontaneous, endothermic, and a physisorption reaction. In addition, the adsorption kinetic data fitted to the pseudo-second order model.     

Molecular mobility of free‐radical‐functionalized carbon‐nanotube/siloxane/poly(urea urethane) nanocomposites

Multiwalled carbon nanotubes (MWNTs) were functionalized by a free‐radical reaction of vinyltriethoxysilane and were blended with poly(urea urethane) (PUU) containing poly(dimethylsiloxane) as a soft segment. PUU was end‐capped with aminopropyltriethoxysilane (A‐silane) or phenyltriethoxysilane (P‐silane).A‐silane‐end‐capped PUU was covalently bonded to functionalized MWNTs, whereas P‐silane‐end‐capped PUU was noncovalently bonded to pristine MWNTs by a π–π interaction. Fourier transform infrared, Raman spectra, and thermogravimetric analysis confirmed the functionalization of MWNTs. The results showed that the optimal reaction time of the functionalization of MWNT was 8 h, and the organic content of the modified carbon nanotubes reached 35.22%. Solid‐state nuclear magnetic resonance and dynamic mechanical analysis were used to investigate the molecular structure and molecular mobility of the carbon‐nanotube/PUU nanocomposites. A‐silane PUU covalently bonded to MWNTs showed a considerable reduction in the molecular motion of the soft segment, which led to the glass‐transition temperature decreasing from ?117 to ?127 °C as MWNTs were incorporated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6084–6094, 2005     

PVT of amorphous and crystalline polymers and their nanocomposites

The Pressure-Volume-Temperature (PVT) of polystyrene (PS), polyamide-6 (PA-6) and their clay-containing polymeric nanocomposites (CPNC) were determined at T = 300-600 K and P = 0.1-190 MPa, thus in the molten, glassy and semicrystalline phase. The melt and glass behavior was interpreted following the Simha-Somcynsky (S-S) cell-hole free volume theory while that of the semicrystalline phase using S-S and the Midha-Nanda-Simha-Jain (MNSJ) cell theory describing crystalline quantum interactions. The theoretical analysis yielded two sets of the interaction parameters, one from the S-S and the other from the MNSJ model. The derivative properties: the compressibility, κ, and thermal expansion coefficient, α, were computed as functions of T, P and clay content, w. These functions, crossing several transition regions, were significantly different for the amorphous PS than for the semicrystalline PA-6. The isobaric PS plots of κ and α vs. T detected secondary transitions at T_β/T_g ≈ 0.9 ± 0.1 and at T_c/T_g = 1.2 ± 0.1. Addition of clay severely affected the vitreous phase (physical aging). In PA-6 systems the behavior was distinctly different than in PS, viz. κ = κ(T) followed a similar function across the melting zone, while α = α(T) dependencies were dramatically different for the solid and molten phase. The theoretical functions in reduced variables provided good basis for explanation of the observed dependencies.     

Retention and selectivity properties of carbamate pesticides on novel polar-embedded stationary phases

This study describes the use of stationary phases with polar functionality suitable for the chemical analysis of carbamates pesticides and comparing with conventional alkyl C8 and C18 phases. The emphasis of this study was to compare the selectivity and retention of the pesticides on different stationary phases, bonded onto 1.7 μm partially porous silica particles under isocratic separation condition. Four stationary phases including: phenylaminopropyl (PAP) phase, bidentate propylurea-C18 (BPUC₁₈), C8 and C18, were successfully bonded on the partially porous silica spheres as evidenced by ²⁹Si and ¹³C solid-state NMR analysis. The phenylaminopropyl phase exhibited smaller retentivity and enhanced selectivity compared to the alkyl C8 phase; the analysis time to run separation of the six carbamate pesticides (i.e., methomyl, propoxur, carbofuran, carbaryl, isoprocarb, and promecarb) on the PAP phase was threefold faster than alkyl C8 phase. In a similar manner, the BPUC₁₈ phase shows similar selectivity to that of the PAP phase, but with longer retentivity; although the BPUC₁₈ phase is characterized with a lesser degree of retentivity for the carbamate pesticides than the conventional alkyl C18 phase. We propose that π–π and weak polar interactions between the carbamate pesticides and the PAP phase dominates the separation mechanism and providing a superior selectivity; faster separation time was also achieved as a result of smaller retentivity. Whereas the C8 and C18 bonded phases exhibits only hydrophobic interactions with the pesticides, leading to larger retentivity. The BPUC₁₈ phase is shown to interact via polar–polar interactions in addition to hydrophobic interactions with the pesticides, providing similar selectivity with the PAP phase but with larger retentivity.     

Response surface optimization for determination of pesticide residues in grapes using MSPD and GC-MS: assessment of global uncertainty

In this work, a simple and low-cost method based on matrix solid-phase dispersion (MSPD) and gas chromatography to determine eight multi-class pesticides such as vinclozolin, dichlofluanid, penconazol, captan, quinoxyfen, fluquinconazol, boscalid, and pyraclostrobin in grapes is described. Fungicide residues were identified and quantified using gas chromatography–mass spectrometry in selected ion monitoring mode (GC-MS, SIM). The experimental variables that affect the MSPD method, such as the amount of solid phase, solvent nature and elution volume were optimized using an experimental design. The best results were obtained using 0.5 g of grapes, 1.0 g of silica as clean-up sorbent, 1.50 g of C₁₈ as bonded phase and 10 mL of dichloromethane/ethyl acetate (1:1, v/v) as eluting solvent. Significant matrix effects observed for most of the pesticides tested were eliminated using matrix-matched standards. The pesticide recoveries in grapes samples were better than 80% except for captan. Intra-laboratory precision in terms of Horwitz ratio of the pesticides evaluated was below 0.5, suggesting ruggedness of the method. The quantification limits of the pesticides were in the range of 3.4–8.7 μg kg⁻¹, which were lower than the maximum residue limits (MRLs) of the pesticides in grapes samples established by the European legislation. Decision limits (CCα) and detection capability (CCβ) have been calculated. The expanded uncertainties at two levels of concentration were <20% for all analytes.