Solvatochromic parameters for binary mixtures of an ionic liquid with various protic molecular solvents

Abstract  

Solvatochromic parameters (E _T ^N, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen-bond donor acidity) have been determined for binary mixtures of propan-2-ol, propan-1-ol, ethanol, methanol and water with recently synthesized ionic liquid (IL; 2-hydroxyethylammonium formate) at 25 °C. In all solutions except aqueous solution, E _T ^N values of the media increase abruptly with the ILs mole fraction and then increase gradually to the value of pure IL. A synergistic behavior is observed for the α parameter in all solutions. The behavior of π* and β are nearly ideal for all solutions except for solutions of methanol with the IL. The applicability of nearly ideal combined binary solvent/Redlich–Kister equation was proved for the correlation of various solvatochromic parameters with solvent composition. The correlation between the calculated and the experimental values of various parameters was in accordance with this model. Solute–solvent and solvent–solvent interactions were applied to interpret the results.     

The Solvent-Like Nature of Silica Particles in Organic Solvents

Summary.   Kamlet-Taft’s α (hydrogen bond donor acidity) and π^* (dipolarity/polarizability) values of various silica batches measured in various solvents are presented. The α and π^* parameters for the various solid acids are analyzed by means of Fe(phen)₂(CN)₂ (cis-dicyano-bis-(1,10)-phenanthroline-iron(II), 1), Michler’s ketone (4,4′-bis-(dimethylamino)-benzophenone, 2), and two hydrophilic derivatives of 2, (4-(dimethylamino)-4′-(di-2-hydroxyethyl)-amino-benzophenone (3a) and 4,4′-bis-(di-(2-hydroxyethyl)-amino)-benzophenone (3b) as well as coumarin 153 (4) as solvatochromic surface polarity indicators. Apparent β (hydrogen bond acceptor basicity) parameters for bare silica have been evaluated by means of an aminobenzodifuranone dye (5) as solvatochromic probe. The chemical interpretation of the α and π^* parameters and the nature of the solvent/surface interaction which they reflect are discussed. It can be shown that an increase of the HBA (hydrogen bond accepting) capacity of the solvent significantly decreases the HBD (hydrogen bond donating) capacity of the surface environment, whereas the dipolarity/polarizability value of the silica/solvent interface is a composite of many effects. The classification of the polarity of silica particles in organic solvents compared to pure liquids is outlined. Theoretical E _T(30) values of the solid/solvent interfaces are calculated by applying linear solvation energy (LSE) relationships using the independently measured α and π^* values of the solid acids according to Received February 2, 2001. Accepted (revised) March 3, 2001     

Solvatochromic Probes Absorbance Behavior in Mixtures of 2-Hydroxy Ethylammonium Formate with Methanol,Ethylene Glycol and Glycerol

Solute-solvent and solvent-solvent interactions were investigated for binary mixtures of an ionic liquid (IL) 2-hydroxy ethylammonium formate as with methanol, ethylene glycol and glycerol. The physicochemical properties of the solvent mixtures at 25 °C, over the whole range of mole fractions, were determined using solvatochromic probes. High normal polarity (E_T^NE_{T}^{N}) in the alcohol-rich region confirms solute-solvent interactions in this medium. Dipolarity/polarizability (π ^∗) show a different trend to E_T^NE_{T}^{N} with a positive deviation from ideal behavior in IL-glycerol mixtures. However, these deviations for other solvent mixtures are insignificant. Contrary to what is observed for E_T^NE_{T}^{N} and π ^∗, hydrogen-bond donor (HBD) acidity and hydrogen-bond acceptor (HBA) basicity demonstrate similar trends. The applicability of the combined nearly-ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation for the correlation of various parameters provides a simple computational model to correlate and/or predict various solvatochromic parameters for many binary solvent systems.     

The Solvent-Like Nature of Silica Particles in Organic Solvents

 Kamlet-Taft’s α (hydrogen bond donor acidity) and π^* (dipolarity/polarizability) values of various silica batches measured in various solvents are presented. The α and π^* parameters for the various solid acids are analyzed by means of Fe(phen)₂(CN)₂ (cis-dicyano-bis-(1,10)-phenanthroline-iron(II), 1), Michler’s ketone (4,4′-bis-(dimethylamino)-benzophenone, 2), and two hydrophilic derivatives of 2, (4-(dimethylamino)-4′-(di-2-hydroxyethyl)-amino-benzophenone (3a) and 4,4′-bis-(di-(2-hydroxyethyl)-amino)-benzophenone (3b) as well as coumarin 153 (4) as solvatochromic surface polarity indicators. Apparent β (hydrogen bond acceptor basicity) parameters for bare silica have been evaluated by means of an aminobenzodifuranone dye (5) as solvatochromic probe. The chemical interpretation of the α and π^* parameters and the nature of the solvent/surface interaction which they reflect are discussed. It can be shown that an increase of the HBA (hydrogen bond accepting) capacity of the solvent significantly decreases the HBD (hydrogen bond donating) capacity of the surface environment, whereas the dipolarity/polarizability value of the silica/solvent interface is a composite of many effects. The classification of the polarity of silica particles in organic solvents compared to pure liquids is outlined.     

Solvatochromic studies on the hydrogen-bond donating and dipolarity/polarizability properties of the polyethylene oxide/silica interface

The polarity of the polyethylene oxide(PEO)/silica interface in 1,2-dichloroethane as solvent is classified by means of linear solvation energy (LSE) relationships . The properties of the bare silica particle surface and the silica/PEO interface is expressed by two terms: the dipolarity/polarizability (π*) of the interface and the hydrogen-bond donating ability (α) of the surface silanols. These terms can be defined by using the Kamlet–Taft solvent parameters α and π* as a reference system. The interfacial polarity parameters α and π* were calculated by means of correlation analyses of the energy of the UV/vis absorption maxima of the surface polarity indicators: di-cyano-bis(1,10-phenanthroline) iron II, bis-4,4′-(N,N-dimethylamino) benzophenone, and 2,6-diphenyl-4-(2,4,6-triphenyl-N-pyridino)phenolate when adsorbed onto the PEO/silica particle surface. The experimental values of the E _T(30) parameter of the PEO/silica interface are compared with independently calculated values employing specific LSE relations derived for well-behaved regular solvents and functionalized silicas. PEO adsorption on silica causes a decrease in the value of the α parameter of the silica surface and an evident increase in the dipolarity/polarizability of the interface. Received: 16 December 1998 Accepted in revised form: 8 January 1999     

Solvatochromic Parameters and Preferential Solvation Behavior for Binary Mixtures of 1,3-Dialkylimidazolium Ionic Liquids with Water

Binary mixtures of 1,3-dialkylimidazolium based ionic liquids (ILs) and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25℃. Empirical solvatochromic parameters, dipolarity/polarizability (π^*), hydrogen-bond donor acidity (α), hydrogen-bond acceptor basicity (β), and Reichardt's polarity parameters (E_T^N) were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt's dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction (x_IL). All these studied systems showed the non-ideal behavior. The maximum deviation to ideality for the solvatochromic parameters can be obtained in the xIL range from 0.1 to 0.3. For most of the binary mixtures, the π^* values showed the synergistic effects instead of the E_T^N, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend: IL >IL-water complex >water.     

A study of solvent effects on complex formation of tungsten(VI) with ethylenediaminediacetic acid in aqueous solutions of propanol

By using spectrophotometric and potentiometric techniques, the formation constants of the species formed in the systems H⁺+W(VI) + ethylenediaminediacetic acid and H⁺ + ethylenediaminediacetic acid were determined in aqueous solutions of propanol at 25°C and a constant ionic strength of 0.1 mol dm⁻³ sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that tungsten(VI) formed a mononuclear 1: 1 complex with ethylenediaminediacetic acid of the type WO₃L³⁻ at −log[H⁺] = 5.8. The formation constants in various media were analyzed in terms of the Kamlet-Taft parameters. Solvents were parameterized by dipolarity/polarizability scales π*, hydrogen-bond donor (HBD) strength α, and hydrogen-bond acceptor strength β. Linear dependences (LSERs) on these solvent parameters were used to correlate and predict a wide variety of solvent effects and provide an analysis of them. Linear relationships were observed when log K_S values were plotted versus π*. Finally, the results are discussed in terms of the effect of solvents on complex formation. The article is published in the original.     

Solute-Solvent Interaction Effects on Protonation Equilibrium of Some Water-Insoluble Flavonoids

The protonation constants of three different flavonoids (naringenin, chrysin, and daidzein) were determined in water–DMSO mixed solvents using a potentiometric method at 25.0 (±0.1) °C and 1.00 mol⋅dm⁻³ tetra-n-butylammonium chloride as supporting electrolyte. The protonation constants were characterized and were analyzed in various solvent media in terms of the Kamlet, Abboud and Taft (KAT) parameters. Single-parameter correlations of the protonation constants versus α (hydrogen-bond donor acidity), β (hydrogen-bond acceptor basicity) or π ^∗ (dipolarity/polarizability) are poor for all compounds, but the dual-parameter α and π ^∗ correlation presents significant improvement with regard to the single- and multi-parameter models. A linear correlation is observed when the logarithm of the experimental protonation constants is plotted versus the calculated ones when the KAT parameters are considered. The protonation constants of the flavonoids in water were also calculated by the Yasuda-Shedlovsky extrapolation method at zero percent organic solvent. Finally, the results are discussed in terms of the effect of solvent composition on the protonation constants.     

On the Role of the Solvent and Substituent on the Protonation Equilibria of Di-Substituted Anilines in Dioxane–Water Mixed Solvents

Protonation constants of a number of di-substituted anilines were determined potentiometrically in 0, 20, 30, 40, 50, and 60% (v/v) dioxane–water mixtures at (25.00 ± 0.02) ^∘C with an ionic strength of 0.10 mol-dm⁻³ sodium perchlorate. The data are discussed in terms of the electronic character of the substituents. Two different methods were used to study the effects of the solvents on the protonation constants; one involved a single polarity parameter, the Dimroth–Reichardt parameter E_T(30); the other involved the Kamlet–Taft multi-parametric method. The protonation constants of di-substituted anilines correlate with the molecular parameters for the dipolarity/polarizability of the solvent, π^∗, and its hydrogen-bond acceptor ability, β.     

Solvent Effect on Protonation Constants of 5, 10, 15, 20-Tetrakis(4-sulfonatophenyl)porphyrin in Different Aqueous Solutions of Methanol and Ethanol

The protonation constants of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H₂tpps⁴⁻, were determined in water–ethanol and water–methanol mixed solvents, using a combination of spectrophotometric and potentiometric methods at 20 °C and 0.1 mol⋅dm⁻³ sodium perchlorate as supporting electrolyte. Two protonation constants, K ₁ and K ₂, were characterized and were analyzed in various media in terms of the Kamlet, Abboud and Taft (KAT) parameters. Single-parameter correlations of the protonation constant K ₁ versus α (hydrogen-bond donor acidity) and π ^* (dipolarity/polarizability) are poor in all solutions, but dual-parameter (α and π ^*) correlation represents a significant improvement with regard to the single- and multi-parameter models. However, the single-parameter correlation of log ₁₀ K ₂ in terms of β (hydrogen-bond acceptor basicity) shows a better result than dual- and multi-parameter correlations. Linear correlation is observed when the experimental log ₁₀ K ₁ and log ₁₀ K ₂ values are plotted versus the calculated ones when the KAT parameters are considered. To evaluate the protonation constants of H₂tpps⁴⁻, the Yasuda-Shedlovsky extrapolation is used to obtain the log ₁₀ K ₁ and log ₁₀ K ₂ values at zero percent organic solvent. Finally, the results are discussed in terms of the effect of the solvent on protonation.     

Synthesis,Spectral Characterization and Solvent Effects on the Electro-Reduction of Mixed Ligand Cobalt(III) Complexes

A series of cobalt(III) complexes of the type cis-β-[Co(ampy)₂(4-R-Py)Cl]Cl₂ where ampy = 2-aminomethylpyridine, R = H, Me, Et, t-Bu, COMe, and CN has been synthesized and characterized spectroscopically. The electro-reduction of these complexes has been studied in propan-2-ol/water and 1,4-dioxane/water media. The redox potential (E _1/2) data were correlated with solvent and structural parameters with an aim to shed some light on the mechanism of these reactions. Correlation of E _1/2 with macroscopic solvent parameters viz. relative permittivity, indicates that the reactivity is influenced by both specific and non-specific solute-solvent interactions. The Kamlet-Taft solvatochromic comparison method was used to separate and quantify the specific and non-specific solvent effects on the redox process. Increases in the percentage of organic co-solvent in both media makes the electro-reduction of Co(III) to Co(II) easier.     

Topological investigations of the molecular species and molecular interactions that characterize pyrrolidin-2-one + lower alkanol mixtures

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound data, u, of pyrrolidin-2-one (i) + ethanol or propan-1-ol or propan-2-ol or butan-1-ol (j) binary mixtures have been determined over entire composition range at 308.15 K. The observed speeds of sound data have been utilized to predict excess isentropic compressibilities, of the investigated binary mixtures. The observed excess thermodynamic properties V^E, H^E and have been analyzed in terms of Graph theory. The analysis of V^E data by the Graph theory suggests that pyrrolidin-2-one exists mainly as a mixture of cyclic and open dimer; ethanol as a mixture of dimer and trimer; butan-1-ol and propan-2-ol as mixture of monomer and dimer and propan-1-ol as a dimer in the pure state, and their mixtures contain 1:1 molecular complex. The IR studies lend additional credence to the nature and extent of interactions for the proposed molecular entities in the mixtures. Also, it has been observed that V^E, H^E and values predicted by the Graph theory compare well to with their corresponding experimental values.     

Employing perichromism for probing the properties of carboxymethyl cellulose films: an expedient, accurate method for the determination of the degree of substitution of the biopolymer derivative

The properties of films of carboxymethyl cellulose, CMC, of different degree of substitution, DS, have been examined by the use of perichromic indicators (probes). The film properties that have been determined are: empirical polarity, E_T(33); “acidity”, α; “basicity”, β; and dipolarity/polarizability, π*. This has been achieved by employing the following perichromic probes: 4-nitroaniline, 4-nitroanisole, 4-nitro-N,N-dimethylaniline, and 2,6-dichloro-4-(2,4,6-triphenyl-pyridinium-1-yl)phenolate, WB. The correlations between both E_T(33)- or π* and DS were found to be linear; that between β and DS is a second order polynomial; no obvious correlation was found between α and DS. The polarities of CMC films are in the range of those of butyl alcohols. As models for CMC, we have employed cellulose plus CMC of high DS; oxidized cellulose with degree of oxidation = 0.5; sodium glucuronate. The former model behaved akin to CMC, but the plots of the perichromic properties versus DS showed different slopes/intercepts. FTIR data and molecular dynamics simulations on the solvation of WB have shown that this difference can be traced to more efficient hydrogen bonding between the film of the model and the probe. This affects the intra-molecular charge-transfer energy of the latter, leading to different responses to the variation of DS. Based on the excellent linear correlation between E_T(33) and DS, for CMC from different origins, we suggest that perichromism is a simple, accurate, and expedient alternative for the determination of DS of the biopolymer derivative.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

Probing the dependence of the properties of cellulose acetates and their films on the degree of biopolymer substitution: use of solvatochromic indicators and thermal analysis

Although cellulose acetates, CAs, are extensively employed there is scant information about the systematic dependence of their properties on their degree of substitution, DS; this is the subject of the present work. Nine CAs samples, DS from 0.83 to 3.0 were synthesized; their films were prepared. The following solvatochromic probes have been employed in order to determine the empirical polarity, E _T(33); “acidity, α”; “basicity, β”, and “dipolarity/polarizability, π*” of the casted films: 2,6-dichloro-4-(2,4,6-triphenyl-pyridinium-1-yl) phenolate, WB; 4-nitroaniline; 4-nitroanisole; 4-nitro-N,N-dimethylaniline; 2,6-diphenyl-4-(2,4,6-triphenyl-pyridinium-1-yl)phenolate, RB. Additionally, two systems, ethanol plus ethyl acetate (EtOH–EtAc), and cellulose plus cellulose triacetate, CTA, were employed as models for CAs of different DS. Regarding the model systems, the following was observed: (i) For EtOH–EtAc, the dependence of all solvatochromic parameters on the “equivalent-DS” of the binary mixture was non-linear because of preferential solvation; (ii) The dependence of E _T(33) on equivalent DS of the cellulose–CTA films is linear, but the slope is smaller than that of the corresponding plot for CAs. This is attributed to the more efficient hydrogen bonding in the model system, a conclusion corroborated by IR measurements. The dependence of solvatochromic parameters of CAs on their DS is described by the simple equations; a consequence of the substitution of the OH by the ester group. The thermal properties of bulk CAs samples were investigated by DSC and TGA; their dependence on DS is described by simple equations. The relevance of these data to the processing and applications of CAs is briefly discussed.     

Solvent Modification in Ion-Pair Extraction: Effect on Sodium Nitrate Transport in Nitrobenzene Using a Crown Ether

A comparative quantitative analysis of the effect of solventmodifiers on the ion-pair extraction of an inorganic salt by a crown ether was conducted with the aim of advancing the understanding of transport of highly hydrophilic metal ions from aqueous salt solutions. Two classes of solvent modifiers that possess electron-pair donor (EPD) or hydrogen-bond donor (HBD) groups were investigated. The equilibrium constants corresponding to the extraction of sodium nitrate into nitrobenzene (NB) employing model neutral host cis-syn-cis-dicyclohexano-18-crown-6 (compound 1) with and without solvent modifier were determined using the SXLSQI computer model. For a series of EPD modifiers—including tri-n-butyl- and tri-phenylphosphate, tri-n-butyl- and tri-phenylphosphine oxide, N,N-di-n-butyl- and N,N-di-phenylacetamide—the enhancement of the NaNO₃ extraction by compound 1 was found to be dependent on the hydrogen-bond acceptance ability of the modifier as quantified by the β solvatochromic parameter. A HBD modifier 3,5-di-t-butylphenol (compound 8), which forms strong hydrogen bonds with nitrate anion in NB, exhibited even greater enhancement of the NaNO₃ extraction by compound 1. The determined extraction constants were correlated with the β- or α-solvatochromic parameters of the solvent modifiers and linear trends were observed. Hydrogen bond interaction between compound 8 and nitrate anion in the presence of the sodium-loaded crown ether in the extraction phaseswas studied by vibrational spectroscopy.     

On the determination of polarity parameters of silica by means of solvatochromic probe dyes

Empirical solvent parameters of silica surfaces are determined by means of solvatochromic dyes, e.g., Cu(tmen) (acac)⁺ ClO ₄ ^– /B(C₆H₅) ₄ ^– , Fe(phen)₂(CN)₂, and Michlers Ketone dissolved in 1,2-dichloroethane or cyclohexane. The values obtained by UV/VIS-measurements are compared with both the polarity scales of Kamlet and Taft and with Gutmann's donor and acceptor numbers. Kamlet and Taft's -parameter (the hydrogen-bond donation capacity of a solvent) is determined independently by means of salicylideneaniline. The ^* of silica is determined using 5-N,N-dimethylamino-5-nitro-2,2-bithiophene and the complex of tetracyanoethylene with Michlers Ketone, respectively. Further on the reliabilities of the obtained Kamlet-Taft parameters , , and ^* are checked by comparism with experimental and calculated values of theE _T(30)-parameter of silica by means of multi-parameter regression analysis. The surface properties of silica are influenced mainly by HBD-properties (75%) and dipolarity/polarizability ^* (20%), but hardly by the HBA-properties (<5%). UV/VIS-measurements were carried out in a special equipment with glass fiber optics, A drawing of the apparatus is given.     

Isentropic Compressibility Changes of Mixing for 1,3-Dioxolane or 1,4-Dioxane + Water + Propanol Ternary Mixtures

Speed of sound data, u_ijk, of 1,3-dioxolane or 1,4-dioxane(i) + water(j) + propan-1-ol or propan-2-ol(k) ternary mixtures and their sub-binary mixtures, u_ij, of 1,3-dioxolane or 1,4-dioxane(i) + water or propan-1-ol or propan-2-ol(j) and water(i) + propan-1-ol or propan-2-ol(j) mixtures have been measured over the entire composition range at 308.15 K. Isentropic compressibility changes of mixing, (κ_s^E)_ij and (κ_s^E) _ijk, for the binary and ternary mixtures have been determined by employing the observed speeds of sound data and densities (calculated from their molar excess volumes data). The (κ_s^E) _ij and (κ_s^E) _ijk values have also been predicated by the graph theoretical approach and the Flory theory. It has been observed that (κ_s^E) _ij and (κ_s^E) _ijk predicted by the graph theoretical approach compare well with their corresponding experimental values.