Reactions of α-mercaptocarboxylic acid hydrazides with triethyl orthoesters: synthesis of 1,3,4-thiadiazin-5(6H)-ones and 1,3,4-oxadiazoles

Reactions of α-mercapto-β-phenylpropionic and α-mercaptophenylacetic acid hydrazides with triethyl orthoesters were conducted under N₂ in glacial acetic acid and resulted in the formation of two groups of products, derivatives of 1,3,4-thiadiazin-5(6H)-ones and 2-(1-mercaptomethyl)-1,3,4-oxadiazoles. When conducting the same transformations on α-mercaptophenylacetic acid hydrazide in the presence of air, two different products from the 1,3,4-oxadiazole family, the appropriate bis(1,3,4-oxadiazol-2-yl-phenylmethyl) disulfides and 2-benzyl-1,3,4-oxadiazoles, were formed with the liberation of free sulfur. The oxygenated bis(1,3,4-oxadiazol-2-yl-phenylmethyl) disulfides were reduced to the corresponding 2-(1-mercaptomethyl)-1,3,4-oxadiazoles with the use of zinc powder under mild conditions.     

Thermal degradation of two classes of block copolymers based on poly(lactic-glycolic acid) and poly(ϵ-caprolactone) or poly(ethylene glycol)

Thermodegradative investigations of two classes of multi-block copolymers containing poly(D,L-lactic-glycolic acid) (PLGA) and either poly(ethylene glycol) (PEG) or poly(ϵ-caprolactone) diol-terminated (PCDT) segments were performed. In particular, the influence of the type and length of the segments as well as of the molar ratio between the D,L-lactic acid (LA) and glycolic acid (GA) residues was investigated at 180°C in air by viscometry, FT-IR analysis and isothermal thermogravimetry. The thermal oxidative degradation of these materials is largely affected by the LA/GA ratio, a higher LA content generally imparting higher stability. The FT-IR analysis suggests that, depending on the composition of the PLGA segments, degradative processes are triggered which can lead to a preferential degradation of the blocks.     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Block ionomer complex micelles based on the self-assembly of poly(ethylene glycol)-block-poly(acrylic acid) and CdCl₂ for anti-tumor drug delivery

A novel block ionomer complex micelles as drug carrier is developed utilizing self-assemble of poly(ethylene glycol)-block-poly(acrylic acid) (PEG-b-PAA) and cadmium chloride. This micelles are characterized to be have good bio-compatibility, hydrophilicity, passive targeting and sustained slow release property which shows great potential for liver cancer therapy. Block ionomer complex micelles based on PEG-b-PAA and cadmium chloride can self-assemble in distilled water, and Cd(2+) agent is entrapped into the core stabilized by PEG shells. Results showed the block ionomer complex micelles to be spherically shaped. Cadmium was incorporated easily into the ionic core with remarkably high efficiency (34.25% weight (wt)/wt). The cadmium-loaded polymeric micelles exhibited sustained and slow release behavior of cadmium and a potent cytotoxicity against SMMC-7721 in vitro. This novel block ionomer complex micelles with cores of metal antitumor drug indicates to be potential carriers for effective drug delivery.     

New method for the synthesis of α-chlorocinnamonitriles

A novel method for the preparation of nitriles of -chlorocinnamic acid from aldehydes and ketones was proposed. Transformation of carbonyl compounds into hydrazones followed by treatment of the reaction mixture with CCl₃CN in the presence of copper chloride(i) yields -chlorocinnamonitriles.     

Aryloxy ‘biometal’ complexes as efficient catalysts for the synthesis of poly(butylene adipate terephthalate)

A comparative study of catalytic activity of aryloxy complexes of Mg, Zn and Al in the synthesis of poly(butylene adipate terephthalate) demonstrated the preference of Al-based catalyst containing two bulky substituents in ortho-position of phenol ligand in terms of higher values of PBAT MW and lower yields of cyclic diester side product.     

New method for the synthesis of β-bromostyrenes

A new stereoselective method was developed for the synthesis of -bromostyrenes (E/Z > 5/1) starting from hydrazones of aromatic aldehydes and bromoform in the presence of CuCl.     

New method for the synthesis of γ-diketones

Summary Over platinized charcoal at 300° 1-(2-furyl)-3-alkanols, as a result of the hydrogenolysis of the furan ring, and 1-(tetrahydro-2-furyl)-3-alkanols, as a result of the isomerization of the tetrahydrofuran ring, give-diketones in yields of 35–50%.     

Hydrophilic films based on poly(acrylic acid)–poly(vinyl methyl ether) blends cross-linked by gamma-radiation

Hydrophilic polymeric films based on blends of poly(acrylic acid) and poly(vinyl methyl ether) (PVME) were prepared by casting technique and were cross-linked by gamma-radiation. The films are soft and elastic in a dry state and form hydrogels upon immersion in water. Effect of absorbed dose on the gel fraction as well as on the swelling of the films in aqueous solutions of different pH is studied. It was found that addition of lower molecular weight PVME decreases the gelation dose, which is likely related to a decrease in glass transition temperature of the blends. In acidic media the films have low swelling degree because of suppression of carboxylic groups ionisation and formation of additional physical cross-links via interpolymer hydrogen bonding.     

Design, synthesis and characterization of novel biodegradable macrodiols based on poly（DL-lactic acid） and poly（p-dioxanone）

Integrating poly(lactic acid)(PLA),glycolic acid(GA) and ethylene glycol(EG) will hopefully result in a novel copolymer that combines such advantages as fastened and controllable release rate and improved flexibility together with good biocompatibility.In this study,p-dioxanone(PDO) was employed to copolymerize with DL-lactide(LA) via ring-opening melt polymerization using Sn(Oct)_2 as an initiator and ethylene glycol as a co-initiator.The obtained degradable macrodiols(HO-P(LA-co-PDO)-OH) were just such...     

A capacitive sensor based on molecularly imprinted polymers and poly(p-aminobenzene sulfonic acid) film for detection of pazufloxacin mesilate

A novel capacitive sensor for pazufloxacin mesilate (pazufloxacin) determination was developed by electropolymerizing p-aminobenzene sulfonic (p-ABSA) and molecularly imprinted polymers (MIPs), which was synthesized through thermal radical copolymerization of metharylic acid (MAA) and ethyl-ene glycol dimethacrylate (EGDMA) in the presence of pazufloxacin template molecules, on the gold electrode surface. Furthermore, 1-dedecanethiol was used to insulate the modified electrode. Alter-nating current (ac) impedance experiments were carried out with a Model IM6e to obtain the capaci-tance responses. Under the optimum conditions, the sensor showed linear capacitance response to pazufloxacin in the range of 5 ng·mL-1 to 5 μg·mL-1 with a relative standard deviation (RSD) 5.3% (n=7) and a detection limit of 1.8 ng·mL-1. The recoveries for different concentration levels of pazufloxacin samples varied from 94.0% to 102.0%. Electrochemical experiments indicated the capacitive sensor exhibited good sensitivity and selectivity and showed excellent parameters of regeneration and stabil-ity.     

Effect of halloysite nanotubes on the thermal degradation behaviour of poly(ε-caprolactone)/poly(lactic acid) microfibrillar composites

This paper reports on the thermal degradation behaviour and kinetics of halloysite nanotubes containing microfibrillated poly(ε-caprolactone) (PCL)/poly(lactic acid) (PLA) blends. It was found that the nanotubes probably catalyzed the PLA degradation, and that the free radicals formed during the PLA degradation initiated PCL degradation at lower temperatures, maybe in combination with halloysite nanotubes (HNT) catalysis. Drawing to form microfibrillated nanocomposites had little influence on the degradation behaviour of these materials, but pre-mixing of the HNT with PLA or PCL prior to melt-mixing and extrusion-drawing of the blends did influence the degradation behaviour, but in different ways. No evidence could be found that the presence and amount of HNT, or the mode of preparation, had an influence on the degradation mechanism, as evidenced through a Fourier-transform infrared (FTIR) analysis of the degradation products.     

Regioselective addition of organomagnesium reagents to N-silyl activated nicotinic acid esters—a convenient method for the synthesis of 4,4-disubstituted 1,4-dihydronicotinates

The addition of RMgX or R₂Mg to nicotinic acid esters, activated with triisopropylsilyl triflate, was investigated. The regioselectivity of this reaction, where 4-unsubstituted and 4-substituted pyridine derivatives were employed as starting materials, was examined. Depending on the structure of the organomagnesium reagent varying ratios of 1,2-, 1,4-, and 1,6-regioisomers were obtained but in any case the 1,4-addition products were clearly predominating. Desilylation of the isomeric pure addition products with LiOH provided stable 4,4-disubstituted dihydropyridines, which could be easily N-alkylated with alkylhalides in high yield. Furthermore, it was shown that the silyl protecting group of the obtained dihydropyridines can be easily replaced by an acyl group.     

One-step preparation of sulfonated carbon-based solid acid from distillers’ grain for esterification

Research on Chemical Intermediates - A carbon-based solid acid catalyst was prepared by simultaneous carbonization and sulfonation of distillers’ grain with concentrated sulfuric acid....     

Hydrothermal synthesis, thermal and luminescent investigations of lanthanide(III) coordination polymers based on the 4,4′-oxybis(benzoate) ligand

In this study, new series of lanthanide 4,4??-oxybis(benzoates) of the general formula Ln₂oba₃·nH₂O, where Ln = lanthanides from La(III) to Lu(III), oba?=?C₁₂H₈O(COO) ₂ ^2? and n?=?3?C6, has been prepared under hydrothermal conditions. The compounds were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction patterns measurements and different methods of thermal analysis (TG, DSC, and TG-FTIR). In addition, photoluminescence properties of the selected complexes have been investigated. Crystalline compounds are isostructural in the whole series. Both carboxylate groups are deprotonated and engaged in the coordination of Ln(III) ions. Heating of the complexes leads to the dehydration and next decomposition processes. Although of the same structure, the removal of water molecules proceeds in different ways. In the nitrogen atmosphere, they decompose releasing water, carbon oxides and phenol molecules. The complexes of Eu(III), Tb(III) and Dy(III) exhibit photoluminescence in the visible range, whereas the compounds of Nd(III) and Yb(III) in the near-infrared region upon excitation by UV light.     

A new method for the synthesis of β-halonitroalkanes

Summary A new method is elaborated for the synthesis of -chloronitroalkanes; it consists in the reaction of phosphorus pentachloride with acetals obtained by the addition of primary -nitro alcohols to vinyl alkyl ethers.     

A facile synthesis of per (poly )fluoroalkyl substituted α-amino acid derivatives

Initiated by CrCl3/Fe redox couple, per(poly)fluoroalkyl iodides added to methyl a-acetylamino acrylate, giving B-per(poly)fluoroalkyl a-amino acid derivatives in good yields.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Resolution method for overlapping peaks based on the fractional-order differential

Equations between the differential order and the maximum of the fractional-order differential for the specified peak signals are developed based on the variation of the maximum of the specified peak signals at different orders. Also, equations between the differential order and the zero-crossing of the fractional-order differential of the specified peak signals are proposed according to the variation of the zero-crossing of the specified peak signals at different orders. Characteristic paramters of the Gaus- sian peak, Lorentzian peak, and Tsallis peak can be estimated using estimator I and estimator II which are obtained by the equations above. As a result, a new method is presented to resolve the overlapped peaks signal. Firstly, a fractional-order differential of the specified peak signals is obtained with the fractional-order differentiation filter. Then, characteristic paramters of the specified peak signals can be extracted using estimator I and estimator II. Finally, the Tsallis peak is used as a model to assign the overlapping peak signals correctly. Experimental results show that the proposed method is efficient and effective for the simulated overlapping peaks and detected overlapping voltammetric peak signals.