An AEE-active polymer containing tetraphenylethene and 9,10-distyrylanthracene moieties with remarkable mechanochromism

A polymer(poly(9,10-anthracenevinylene-alt-4,4'-(9,9-bis(4-(4'-(1,2,2'-triphenylvinyl)phenoxy)butyl)-9Hfluorene-2,7-diyl) dibenzaldehyde), P1) was successfully synthesized through the Wittig-Horner reaction by employing fluorene and 9,10-distyrylanthracene moieties as building blocks for backbone and tetraphenylethenes as pendant groups. Photophysical and thermal properties of the resulting polymeric emitter were fully characterized by ultraviolet-visible(UVVis) absorption and photoluminescence(PL) spectra, thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC). While P1 emits an orange-light centered at 567 nm in dilute tetrahydrofuran(THF) solution, the solid powder of the polymer exhibits strong yellow emission peaked at 541 nm. It is also found that the as-synthesized polymer shows unique property of aggregation-enhanced emission(AEE). In addition, P1 possesses high thermal stability with a decomposition temperature(T_(d,5%)) of 430 °C and high morphological stability with a glass transition temperature(T_g) of 171 °C. Under the stimulus of mechanical force, the emission of P1 can be changed from yellow to red(Δλ_(max)=61 nm), showing a remarkable mechanochromism. The results from XRD analysis suggest that such mechanochromic phenomenonof P1 is probably caused by the destruction of crystalline structure, which leads to the conformational planarization of the distyrylanthracene moieties forming by the polymerization and the increase of molecular conjugation of the backbone.     

Slow Down Dewetting in Polymer Films by Isocyanate-treated Graphite Oxide

Isocyanate-treated graphite oxides(i GOs) were well-dispersed into the polystyrene(PS) thin films and formed a novel network structure. With control in fabrication, an i GOs-web layer was horizontally embedded near the surface of the films and thus formed a composite slightly doped by i GOs. This work demonstrated that the i GOs network can remarkably depress the dewetting process in the polymer matrix of the composite, while dewetting often leads to rupture of polymer films and is considered as a major practical limit in using polymeric materials above their glass transition temperatures(Tg). Via annealing the 50–120 nm thick composite and associated neat PS films at temperatures ranging from 35 °C to 70 °C above Tg, surface morphology evolution of the films was monitored by atomic force microscopy(AFM). The i GOs-doped PS exhibited excellent thermal stability, i.e., the number of dewetting holes was greatly reduced and the long-term hole growth was fairly restricted. In contrast, the neat PS film showed serious surface fluctuation and a final rupture induced by ordinary dewetting. The method developed in this work may pave a road to reinforce thin polymer films and enhance their thermal stability, in order to meet requirements by technological advances.     

Synthesis and properties of polyimides containing <Emphasis Type="Italic">N</Emphasis>-substituted benzimidazole rings

A series of novel benzimidazole-containing aromatic polyimides with precise structures in high yields were synthesized by the catalyst-free nucleophilic substitution polycondensation of 4,4’-bis(4-fluorophthalimido) diphenyl ether with different molar ratios of 1,4-bis(2-benzimidazolyl) benzene to 4,4’-dihydroxydiphenyl sulfone via a C–N/C–O coupling reaction process. The reaction was carried out at 210°C in the presence of anhydrous potassium carbonate. The structures of the resulting polymers were characterized by means of FTIR, ¹H NMR spectroscopy, and elemental analysis, and the results were largely consistent with the proposed structure. DSC and TG measurements showed that the polymers had high glass transition temperatures (T_g > 215°C), good thermostability, and high decomposition temperatures (T_d5% > 456°C). These novel polymers also showed easy solubility. In addition, the obtained films have good optical transparency, and the mechanical properties exhibited tension strength of 48.2–74.8 MPa and tensile moduli of 1.3–1.9 GPa without any stretching.     

Temperature-dependent AC electrical conductivity,thermal stability and different DC conductivity modelling of novel poly(vinyl cinnamate)/zinc oxide nanocomposites

Thermal analysis on organically modified Ca²⁺-montmorillonite (OMON) and its source materials—octadecylamine (ODA) and Ca²⁺-montmorillonite (Ca²⁺-Mon)—was studied using thermally stimulated current (TSC) technique. The appearance of ρ _MON peak with the T _max = 75 °C shows the ability of the developed TSC system to demonstrate the relaxation effects of dehydration in Ca²⁺-Mon. It appeared within the temperature range of DSC endothermic peak (30–100 °C) where the T _mMON = 58 °C. Segmental motions of ODA chains and structural disruptions in the modifier agent compound produced TSC α _ODA, ρ _ODA and ρ _1ODA peaks that are comparable to thermal transition and endothermic peaks in DSC profile (T _gODA, T _m1ODA and T _m2ODA). The effect of localized motion in ODA chains as revealed by the TSC β_OMON peak (T _max = ?23 °C), however, is absent in the DSC profile of OMON. It shows TSC technique has high sensitivity in detecting various relaxation behaviors at molecular level. More evidences are demonstrated by the ρ _OMON (T _max = 86 °C) and ρ _1OMON (T _max = 105 °C) peak originated from the ODA chains structures. These peaks also confirm the intercalation of the modifier cations inside the Ca²⁺-Mon gallery.     

High thermal stable polyimide resins derived from phenylethynyl-endcapped fluorenyl oligoimides with low melt viscosities

To improve the processability and thermal stability of polyimide, a series of novel phenylethynyl-endcapped oligoimides(PEPA-oligoimides) with calculated molecular weights(M_nC) were successfully prepared from thermal imidization of 4,4'-(9-fluorenylidene) dianiline(BAFL) as fluorenyl diamine, 4,4′-oxy-diphthalic anhydride(ODPA) as aromatic dianhydride and 4-phenylethynylphthalic anhydride(4-PEPA) acted as reactive end-capping reagent at elevated temperatures. Experiment results indicated that the oligoimides were the mixtures of PEPA-endcapped oligomers with different degrees of polymerization characterized by MALDI-TOF mass spectra. The influence of chemical structures on the melt processabilities of the oligoimides, the thermal, dielectric and mechanical properties of the thermoset resins was studied. The typical oligoimide resin owned minimum melt viscosity of 0.2 Pa·s at around 310 °C and wide melting processing window, suitable for resin transfer molding(RTM). Besides, its corresponding thermal-cured polyimide resin possessed glass transition temperature(T_g) as high as 514 °C. The dielectric constants of polyimide resins decreased from 3.15 to 2.80 by reducing the M_nC. The mechanical properties of the polyimide neat resins were improved gradually with increasing MnC. Finally, the carbon fiber/polyimide(C_f/PI) composite laminates showed excellent mechanical strength retention rate at 350 °C, might be long-term served at extremely high temperature in aerospace and aviation field.     

Synthesis and characterization of crystallizable aliphatic thermoplastic poly(ester urethane) elastomers through a non-isocyanate route

A simple non-isocyanate route is developed for synthesizing crystallizable aliphatic thermoplastic poly(ester urethane) elastomers(TPEURs) with good thermal and mechanical properties. Three prepolymers of1,6-bis(hydroxyethyloxycarbonylamino) hexane(BHCH), i.e. Pre PBHCHs, were prepared through the self-transurethane polycondensation of BHCH. A poly(butylene adipate) prepolymer(Pre PBA) with terminal HO― groups was prepared and used as a polyester glycol. A series of TPEURs were prepared by the co-polycondensation of the Pre PBHCHs with Pre PBA at 170 ℃ under a reduced pressure of 399 Pa. The TPEURs were characterized by gel permeation chromatography, FTIR,1H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, atomic force microscopy, and tensile test. The TPEURs exhibited M_n up to 23300 g/mol, M_w up to 51100 g/mol, Tg ranging from-33.8 ℃ to-3.1 ℃, T_m from 94.3 ℃ to 111.9 ℃, initial decomposition temperature over 274.7 ℃, tensile strength up to18.8 MPa with a strain at break of 450.0%, and resilience up to 77.5%. TPU elastomers with good crystallization and mechanical properties were obtained through a non-isocyanate route.     

A novel 3D energetic coordination polymer containing Co(II) atoms in a pentanuclear cluster

A novel coordination polymer [Co₅(OH)₂(dnbpdc)₄(H₂O)₆]·16H₂O (1) (dnbpdc = 6,6′-dinitro-4,4′-biphenyldicarboxylic acid) is obtained from a hydrothermal reaction. The structure of complex 1 is characterized by elemental analysis, IR spectroscopy, and single crystal X-ray diffraction analysis. The title compound (C₅₆H₇₀Co₅N₈O₅₆, M _r = 2045.85) crystallizes in the triclinic space group P-1 with a = 11.9349(2) Å, b = 12.1895(2) Å, c = 15.420(2) Å, α = 109.390(7)°, β = 94.786(1)°, γ = 108.027(9)°, V = 1968.4(4) ų, Z = 1, D _c = 1.726 g/cm³, F(000) = 1045, μ(MoK _α) = 1.154 mm^–1, T = 133(2) K, the final R = 0.0316 and wR = 0.0692 for 7032 observed reflections with I > 2σ(I). The coordination polymer is built of a pentanuclear Co(II) cluster, four dnbpdc ligands, two hydroxyl groups, six coordination water and sixteen crystal water molecules. Ligand oxygen atoms exhibit three types of coordination modes (monodentate, syn-syn bridging bidentate and bridging tridentate). Moreover, the infinite three-dimensional supramolecular network is generated by coordination and hydrogen bonds. The thermal stability of complex 1 is evaluated by differential scanning calorimetry and thermogravimetric analysis.     

Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Non-Isothermal Crystallization Behavior of β-Nucleated Isotactic Polypropylene/Multi-Walled Carbon Nanotube Composites with Different Melt Structures

In this study, the melt structure status of isotactic polypropylene/multi-walled carbon nanotubes composites (iPP/MWCNTs) nucleated with β-NA was tuned by changing the fusion temperature T _f . The non-isothermal crystallization behavior and subsequent melting behavior of the sample were studied in detail. The results showed that under different cooling rates (2, 5, 10, 20 and 40 deg/min), the crystallization temperature increased gradually with the decrease of T _f , meanwhile, when T _f was in the temperature range of 166–174°C where ordered structures survived in the melt (named Region II), the crystallization activation energy was significantly lower compared with the case T _f > 174°C or T _f < 166°C. On the subsequent melting curves, the occurrence of the melt structure can be observed at all the cooling rates studied; the location of the Region II was constant, which did not show dependency on the cooling rates; low cooling rate and relative low T _f within 166–174°C encouraged the formation of more β-phase triggered by melt structure.     

Structure of the 1:1 complex of dimethyl sulfoxide with hydroquinone: Supramolecular architecture based on D-H⋯A hydrogen bonds (D = O,C; A = O, π)

The hydroquinone-dimethyl sulfoxide-toluene system was investigated by thermal and X-ray diffraction analyses. The crystal structure of the 1:1 complex of hydroquinone with dimethyl sulfoxide was determined. Crystal data: C₈H₁₂O₃S, M = 188.24, triclinic system, space group P1¯, unit cell parameters: a = 7.4202(2) Å, b = 8.4046(3) Å, c = 8.7340(3) Å; α = 100.830(1)°, β = 99.794(1)°, γ = 114.129(1)°; V = 469.35(4) ų, Z = 2, d _calc = 1.332 g/cm³, R1 = 0.028, T = 100 K. The molecules are linked in a supramolecular assembly via D-H...A hydrogen bonds (D = O, C; A = O, π).     

Thermodynamic Properties of Zincate-Manganites of LaM<Subscript>2</Subscript> <Superscript>II</Superscript>ZnMnO<Subscript>6</Subscript> (М<Superscript>II</Superscript> = Mg,Ca, Sr,Ba) Composition

Temperature dependences of the heat capacity of new zincate-manganites of LaM₂^IIZnMnO₆ (M^II = Mg, Ca, Sr, Ba) composition are studied via experimental calorimetry in the interval of 298.15–673 K. It is found that all compounds have λ-shape effects on the curve of dependence C_p° ~ ?(T) with respect to phase transitions of the second kind. Equations for the temperature dependence of the heat capacity are derived with allowance for phase transition temperatures, and thermodynamic functions H°(T) ? H°(298.15), S°(T) and Φ^xx(T) are calculated on the basis of experimental data on C_p°(T) and the calculated S°(298.15) value.     

Thermal polymerization of styrene: New data on the conversion dependence of the initiation rate

With the aid of new acceptors of free radicals usable at high temperatures (T > 100°C), the rate of initiation w _i has been measured experimentally for the thermal polymerization of styrene at 122.5°C in a wide range of conversions C = 0–80%. It has been shown that the value of w _i tends to increase in the course of polymerization transformation in agreement with the w _i = f(C) relationship calculated from the kinetic data on the thermal polymerization of styrene in the absence of counters of free radicals. Hypothetical reasons for this non-trivial tendency have been formulated. The experimental dependence w _i = f(C) has been measured for the first time and has been invoked to refine currently available mathematical models for the thermal polymerization of styrene that assume that w _i remains invariable in the course of polymerization transformation.     

Thermal properties characterization of two promising phase change material candidates

Solar absorption cooling is a wonderful method to provide cold energy by exploiting solar energy. Phase change materials (PCMs) that store latent thermal energy are indispensible in solar absorption cooling system. It is worthwhile to find new PCMs due to the demanding on the temperature of the stored thermal energy which in turn would power the absorption chiller. In this paper, two compounds: 1-bromo-2-methoxynaphthalene (compound 1) and 2,2′-diphenyl-4,4′-bi(1,3-dioxane)-5,5′-diol (compound 2), were selected as potential PCMs. Their thermal energy storage properties and thermal stability were characterized by differential scanning calorimetry and thermogravimetric analysis. The results showed that both compounds could be applied as good PCMs in solar absorption cooling systems. Compound 1 melted at 356.82 K with the ΔH of 98.81 J g^?1, while compound 2 melted in a broad temperature range with the melting point of 466.26 K and the ΔH of 101.4 J g^?1. Both compounds exhibited good thermal stability. Furthermore, the molar specific heat capacities of these two compounds were measured by temperature-modulated differential scanning calorimetry from 198.15 K to the temperature that they started to decompose, and the thermodynamic functions of [H _T–H _298.15] and [S _T–S _298.15] were calculated based on the specific heat capacities data.     

Synthesis and heat capacity of NdVO<Subscript>4</Subscript> in the temperature range of 384–859 K

Heat capacity of NdVO₄ was determined in the temperature range of 384–859 K using differential scanning calorimetry. The thermodynamic functions (H°(T)–H°(384 K), S°(T)–S°(384 K), and Φ°) of neodymium orthovanadate were calculated using the experimental C_p = f(T) values. The structure of NdVO₄ was studied at 298 and 973 K.     

DSC measurements of blood plasma on patients with chronic pancreatitis and operable and inoperable pancreatic adenocarcinoma

Currently, the most examinations and markers are of limited diagnostic and prognostic value in chronic inflammation of the pancreas and its malignant tumorous disease. The purpose of this pilot study was to measure thermal changes of blood plasma by differential scanning calorimetry (DSC) method on patients with chronic pancreatitis, and with operable or inoperable pancreatic adenocarcinoma. The study involved chronic pancreatitis patients (n = 5), in whom had to perform surgery due to any complications. In malignant pancreatic cancer group, according to resectability of the tumors, patients were divided into operable (curative R0 resection, n = 11) and inoperable (palliative double bypass, n = 5) subgroups. Peripheral blood samples were collected from the patients preoperatively and from healthy controls (n = 5). Denaturation of plasma components was detected in Setaram Micro DSC-II calorimeter. DSC results showed decrease of T _m1 (48.8 °C) and T _m2 (61.8 °C) and increase of T _m3 (68 °C) in chronic pancreatitis group compared to healthy controls (56.2, 63.1 and 68 °C). Similar tendencies were in patients with operable (48.2, 61.5, 67.6 °C) and inoperable (48.1, 62.4, 69 °C) pancreas adenocarcinoma. Calorimetric enthalpy mildly decreased in each group except for operable group (1.3 J g^?1 ?H) compared to controls (1.2 J g^?1 ?H). This research confirmed that DSC parameters of blood plasma on patients with chronic pancreatitis and pancreatic adenocarcinoma are clearly distinct from thermodynamical data of healthy controls. After better validation of calorimetric data, it can be a noninvasive tool for diagnostic and monitoring of pancreatic diseases.     

Thermodynamic properties of triphenylantimony dibenzoate

The temperature dependence of the heat capacity of triphenylantimony dibenzoate Ph₃Sb(OC(O)Ph)₂ is studied in the range of 6–480 K by means of precision adiabatic vacuum calorimetry and differential scanning calorimetry. The melting of the compound is observed in this temperature range, and its standard thermodynamic characteristics are identified and analyzed. Ph₃Sb(OC(O)Ph)₂ is obtained in a metastable amorphous state in a calorimeter. The standard thermodynamic functions of Ph₃Sb(OC(O)Ph)₂ in the crystalline and liquid states are calculated from the obtained experimental data: C_p^°(T), H°(T)–H°(0), S°(T), and G°(T)–H°(0) for the region from T → 0 to 480 K. The standard entropy of formation of the compound in the crystalline state at T = 298.15 K is determined. Multifractal processing of the low-temperature (T < 50 K) heat capacity of the compound is performed. It is concluded that the structure of the compound has a planar chain topology.     

Novel hyperbranched polymers as host materials for green thermally activated delayed fluorescence OLEDs

A series of novel hyperbranched polymers(HBPs) consisting of a 2,7-subsituted 9-(heptadecan-9-yl)-9H-carbazole unit(A_2+A_2') and a tetra-substituted green thermally activated delayed fluorescence(TADF) dye of 2,3,5,6-tetra(9Hcarbazol-9-yl)-4-pyridinecarbonitrile(4CzCNPy, B4) have been synthesized via Suzuki cross-coupling reaction following an "A2+A2'+B_4" method. The polymers are named according to the polymerization ratio of 4CzCNPy monomer(5 mol%, 10 mol% and 15 mol% for HBPs of P2-P4 respectively, and 0 mol% for the control linear polymer P1). Their thermal, optoelectronic and electrochemical properties have been characterized by a combination of techniques. All the polymers exhibit high thermal stability with the decomposition temperatures(Td) above 400 ℃ and glass transition temperatures(Tg) up to 98 ℃. Unfortunately, the incorporation of TADF moiety into these HBP materials induced non-TADF characteristics. However, when the HBPs functionalized as the host for our previously developed 4CzCNPy TADF dopant in solution processed devices, maximum external quantum efficiency of 5.7% and current efficiency of 17.9 cd/A have been achieved in P3-based device, which is significantly higher than those of 1.5% and 4.2 cd/A for the linear polymer P1.     

Thermodynamic Properties of Polyphenylquinoxaline in the Temperature Range of <Emphasis Type="Italic">T</Emphasis> → 0 to 570 K

The thermodynamic properties of amorphous polyphenylquinoxaline in the temperature range of 6 to 570 K are studied via precision adiabatic vacuum calorimetry and differential scanning calorimetry. The thermodynamic characteristics of glass transition are determined. Standard thermodynamic functions C^°_p, H°(T) ? H°(0), S°(Т) ? S°(0), and G°(T) ? H°(0) in the range of T → 0 to 570 K and the standard entropy of formation at T = 298.15 K are calculated. The low-temperature (T ≤ 50 K) heat capacity is analyzed using a multifractal model for the processing of heat capacity, fractal dimension D values are determined, and conclusions on the topological structure of the compound are drawn.     

Standard Thermodynamic Functions of Crystalline Arsenate Mg<Subscript>0.5</Subscript>Zr<Subscript>2</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>3</Subscript> in the Range from <Emphasis Type="Italic">T</Emphasis> → 0 to 670 K

The temperature dependence of heat capacity C^° _p = f(T) of crystalline arsenate Mg_0.5Zr₂(AsO₄)₃ was studied by precision adiabatic vacuum and differential scanning calorimetry in the temperature range 8?670 K. The standard thermodynamic functions C^° _p (T), H°(T)–H°(0), S°(T), and G°(T)–H°(0) of the arsenate for the range from Т → 0 to 670 K and the standard formation entropy at Т = 298.15 K were calculated from the obtained experimental data. Based on the low-temperature capacity data (30–50 K) the fractal dimension D of the arsenate was determined, and the topology of its structure was characterized. The results were compared with the thermodynamic data for the structurally related crystalline phosphates M_0.5Zr₂(PO₄)₃ (M = Mg, Ca, Sr, Ba, Ni) and arsenate NaZr₂(AsO₄)₃.     

High performance bio-based polyurethane elastomers: Effect of different soft and hard segments

In this work, a series of high performance bio-based polyurethanes(bio-PUs) were synthesized from polylactide(PLA)-based diols, different diisocyanates(TDI, MDI, HDI, IPDI) and chain extender 1,4-butanediol, in which different soft and hard segments are used to adjust their transition temperatures and mechanical properties. Poly(lactide-co-caprolactone)copolymer diols(co-PLAols) instead of PLA diols as the soft segment improved the thermal stability and mechanical properties of the synthesized bio-PUs. Among them, MDI-based bio-PUs have the highest T_g(43.8 °C), tensile strength(23.5 MPa) and modulus(380.8 MPa), while HDI-based bio-PUs have the lowest T_g(21.4 °C) and highest elongation at break(580%). Especially, the bio-PUs synthesized from co-PLAols and MDI demonstrate better mechanical properties,closed to petroleum-based commodities. Furthermore, the obtained bio-PUs display good shape memory properties at body temperature and cytocompatibility. Therefore, these bio-PUs are promising for applications in biomedical fields.