Effect of the exchange of substituent position in an amide amphiphile on the monolayer characteristics

The monolayer characteristics of two very similar amphiphiles, N-tridecyl-beta-hydroxypropionic acid amide (C13H27-NH-CO-C2H4OH; THPA) and N-(beta-hydroxyethyl)tridecanoic acid amide (C13H27-CO-NH-C2H4OH; HETA), the chemical structure of which is only changed by exchanging the position of the two substituents at the acid amide group, are compared. These small changes in the chemical structure give rise to large differences in the phase behavior of the HETA and THPA monolayers, as concluded from the differences in the surface pressure-area (pi-A) isotherms. Since both amphiphiles have the same alkyl chain length, the shift of the fluid/condensed phase transition pressure pi(c) to higher temperatures from THPA to HETA indicates a stronger polar character of the THPA headgroup. Considerable differences between the HETA and THPA monolayers also exist in the domain morphology, although, in both cases, six arms usually grow from a round center. The fractal-shaped HETA domains grow by tip splitting under the formation of numerous doubloons so that branching is considerably limited. This suggests a certain fluidity of the HETA condensed phase. The main differences of the domains result from the higher crystallinity. The starlike THPA domains have dendritic character and can form curved dendrites, which are partially two-dimensional twins due to the formation of dislocations in the two-dimensional lattice structure. In the case of HETA monolayers, the grazing incidence X-ray diffraction studies reveal a hexagonal packing of the alkyl chains oriented perpendicularly to the surface in an LS phase. In the case of THPA monolayers, an oblique lattice is formed. However, at low temperatures, a second phase transition between two condensed phases occurs that is demonstrated by an abrupt transition between two different oblique lattice structures at the surface pressure where a cusp in the pi-A isotherms occurs at T < 10 degrees C.     

由对苯二甲酰胺二醇合成聚酯酰胺及其扩链反应的研究

以N,N′-二(2-羟乙基)对苯二甲酰胺与己二酸及丁二醇缩聚,合成了同时带有端羧基与端羟基的聚酯酰胺预聚体,研究了不同扩链剂的扩链反应,获得了特性黏度达1.05 dL/g的聚酯酰胺.对预聚体及扩链后聚合物进行了红外与核磁表征,研究了聚合物的结构,并对聚合物进行了DSC与TG分析.     

Enhanced conductivity of thin film polyaniline by self-assembled transition metal complexes

In a recent study, the transition metal complex, cis-dichlorobis(2-,2'-dipyridyl)ruthenium (II) (Ru(bpy)2Cl2), and the macrocycle Ru(TPP)CO (TPP:- tetraphenylporphine) were bound to pyridine terminated self-assembled monolayers on quartz. Following modification of the quartz surface with metal complexes, the conducting polymer polyaniline was deposited via in situ polymerization. The sheet conductivity (as measured by the four-probe method) of the resulting polyaniline films deposited onto Ru(bpy)2Cl2 and Ru(TPP)CO surfaces was significantly enhanced relative to films deposited onto unmodified quartz. It is postulated that either the macrocycle or the transition metal complex-modified surface interacts with the conducting polymer as it is forming, resulting in a more ordered expanded coil conformation for the polymer. The net result of such an interaction is a thin film possessing significantly greater electrical conductivity.     

SYNTHESIS AND ELECTRO-OPTICAL PROPERTIES OF POLY(2-ETHYNYLPYRIDINIUMTOSYLATE) HAVING PROPAGYL SIDE CHAIN

Novel conjugated ionic polymer was prepared by the polymerization of 2-ethynylpyridine with propargyl tosylate in refluxing methyl alcohol. The polymerization proceeded well in homogeneous manner to give a relatively high yield of polymer. The resulting poly(2-ethynylpyridinium tosylate) having propargyl side chain [poly(EPT-P)] were hygroscopic and soluble in water, methyl alcohol, DMF, and DMSO. The inherent viscosities of the polymers were in the range of 0.08-0.29dL/g. Instrumental analyses using NMR, IR, and UV-visible spectroscopies and elemental analyses indicated that the resulting poly(EPT-P) have a conjugated ionic polymer backbone carrying N-propargyl-2-pyridinium tosylate. Thermal and electro-optical properties of the polymers were also studied.     

Synthesis and thermal properties of liquid-crystalline polyacrylates containing a carbazolyl group in the mesogen

The new acrylate monomers 4-(ω-acryloyloxyalkyloxy)-N-(9-methyl-2-carbazolylmethylene) anilines containing from 2 to 11 methylenic units in their alkyl group and a carbazolyl group in the mesogenic unit were synthesized and polymerized by azobisisobutyronitrile (AIBN) as radical initiator and by low-energy electron beam (EB) initiation. The thermal properties of the resulting polymers were examined using differential scanning calorimetry and thermal optical polarizing microscopy. The polymer prepared by AIBN with a hexamethylene spacer exhibited a nematic phase from 73 to 170°C and with an undecamethylene spacer exhibited a smectic phase from 55 to 202°C. The isotropization temperature of the polyacrylates increased with increasing the number of carbons of the methylenic spacer. The yield of the resulting polymer was changed by EB irradiation temperature from 4.5 to 41%. The highest yield was obtained when the monomer was polymerized in a liquid-crystalline phase. The same tendency was observed in the molecular weight of the resulting polymers. © 1994 John Wiley & Sons, Inc.     

Electrochemical polymerization of functionalized thiophene derivatives for the immobilization of proteins

The hydroxy group of 3-(2-hydroxyethyl)thiophene was protected as methyl ether 1 and as dimethyl tert-butyl silyl ether 5 before anodic polymerization. The poly[3-(2-methoxyethyl)thiophene] 2 was prepared by electrochemical homopolymerization of 1 . Ether cleavage was carried out in the polymer film 2 and the resulting poly [3-(2-hydroxyethyl)thiophene] ( 3 ) was activated with cyanogen bromide to immobilize alcohol dehydrogenase. Silylether 5 did not undergo homopolymerization but copolymerization of 5 with 3-methylthiophene ( 4 ) was successful. After cleavage of the protecting group the resulting copolymer 7 was activated by cyanuric chloride, and chymotrypsin was immobilized. Electrocopolymerization of thiophene-3-acetic acid ( 8 ) and 3-methylthiophene ( 4 ) under various conditions produces copolymer 9 . By activation of the carboxylic groups with N,N'-dicyclohexylcarbodiimide (DCC) lactate oxidase (LOD) was bond to the surface of the electrode to form a lactate sensor.     

Transition metal ion-substituted polyoxometalates entrapped in polypyrrole as an electrochemical sensor for hydrogen peroxide

A conducting polymer was used for the immobilization of various transition metal ion-substituted Dawson-type polyoxometalates (POMs) onto glassy carbon electrodes. Voltammetric responses of films of different thicknesses were stable within the pH domain 2-7 and reveal redox processes associated with the conducting polymer, the entrapped POMs and incorporated metal ions. The resulting POM doped polypyrrole films were found to be extremely stable towards redox switching between the various redox states associated with the incorporated POM. An amperometric sensor for hydrogen peroxide detection based upon the POM doped polymer films was investigated. The detection limits were 0.3 and 0.6 μM, for the Cu(2+)- and Fe(3+)-substituted POM-doped polypyrrole films respectively, with a linear region from 0.1 up to 2 mM H(2)O(2). Surface characterization of the polymer films was carried out using atomic force microscopy, X-ray photoelectron spectroscopy and scanning electron microscopy.     

Studies on the atom transfer radical polymerization of a maleimide AB* monomer and modification of the halogen end groups

The atom transfer radical polymerization (ATRP) of an AB* monomer, N-(4-α-bromobutyryloxy phenyl)maleimide (BBPMI), was conducted using the complex of CuBr/2,2′-bipyridine as catalyst. The study of kinetics of polymerization and the growth behavior of macromolecules show that the polymerization proceeds rapidly in first 1 h and then slows down. The decrease in the rate of polymerization is ascribed to the poor reactivity of maleimide radicals from A* to initiate the polymerization of maleimide double bonds. The molecular weight of the resulting polymer also increases with the dosage of catalyst. The coincidence of molecular weight determined by hydrogen proton nuclear magnetic resonance spectroscopy (¹H NMR) and gel permeation chromatography (GPC) proves that the resulting polymer is of linear structure, which is further verified by ¹³C NMR measurement and high performance liquid chromatography (HPLC) analysis of the hydrolysate of the resulting polymer. The stabilization modification of the halogen end groups of the resulting polymer by free-radical chain transfer reaction was attempted under ATRP condition. Isopropyl benzene was employed as the chain transfer agent. Indeed, the modified polymer with carbon-bromine bonds conversion of 40.7% shows enhanced thermal stability. The initial weight loss temperature has been increased from 193 to 243 °C. On the other hand, the atom transfer radical copolymerization of BBPMI with styrene resulted in the formation of hyperbranched polymer.     

Electrochemical synthesis and investigation of poly(1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene) and its application in an electrochromic device

1,4-Bis(2-(3,4-ethylenedioxy)thienyl)benzene, prepared by Stille cross-coupling reaction was successfully electrochemically polymerized to give polymer 1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene (PEBE). Characterizations of the resulting polymer PEBE were performed by cyclic voltammetry (CV), UV–vis, Fourier transform infrared spectroscopy and scanning electron microscopy. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. The resulting polymer film has distinct electrochromic properties and shows three different colors (deep red, gray, and light blue) under various potentials. At the dedoped state of the polymer, the π–π* transition absorption peak is located at 510?nm and the optical band gap (E _g) was calculated as 1.92?eV. The PEBE film shows a maximum optical contrast (ΔT%) of 31.0?% at 500?nm with a response time of 0.85?s. The coloration efficiency of PEBE film was calculated to be 182.2?cm²C^?1. An electrochromic device (ECD) based on PEBE and poly(3,4-ethylenedioxythiophene) was also constructed and characterized. The response time was measured as 0.4?s, and the coloration efficiency of the device was calculated to be 225.4?cm²C^?1. Furthermore, this ECD exhibited satisfactory optical memories and redox stability.     

5,11-Conjugation-extended low-bandgap anthradithiophene-containing polymer exhibiting enhanced thin-film order and field-effect mobility

Anthradithiophene was incorporated in a polymer structure by extending its conjugation from the 5,11-positions, through in situ desilylation followed by acetylenic coupling with a dibromo-monomer. The resulting polymer showed largely redshifted order in a thin film as well as order in thin film, forming lamellar structures out of the substrate plane. As a result, it exhibits field-effect hole mobilities, on the order of 0.1 cm(2) V(-1) s(-1), a ten to hundred-fold improvement as compared to previous acene-containing polymers.     

Living radical polymerization of methylstyrenes by a stable nitroxyl radical,and stability of the aminoxy chain end

Radical polymerization of 2-, 3-, and 4-methylstyrenes (MeSts) was investigated with benzoyl peroxide (BPO) as an initiator, in the presence of 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO). The polymerization was performed in bulk for 3.5 h at 95°C, and then continued for a defined time at 125°C, to give the corresponding poly(MeSt)s with narrow polydispersity in high yield. It was found that the polymerization proceeded in accordance with a living mechanism, because the molecular weight of the resulting polymers was proportional to the conversion, and to the reciprocal of the initial concentration of MTEMPO. It was found that steric hindrance between the methyl group of 2-MeSt, and the tetramethyl ones of MTEMPO, significantly contributed to the rate of polymerization, and to the stability of the growing polymer chain end. The stability decreased in the order of 2- > 3- > 4-MeSt, by occurrence of decomposition, which was caused by disproportionation of the growing chain end. However, the steric hindrance had no effect on the tacticity of the resulting polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 , 269–276, 1998     

Embedded hydrophilic nanogranules with radiating proton-conducting channels in a hydrophobic matrix

It is a significant challenge to develop proton exchange membranes (PEMs) possessing both desired proton conductivity and low methanol permeability for the direct methanol fuel cells (DMFC). In this work, a composite PEM was fabricated from a predominantly hydrophobic framework of three-component polymer blend (TCPB) of acrylic polymers and a dispersed proton-conducting hydrophilic copolymer network. The hydrophilic copolymer was designed to contain three co-monomer units of complementary functionalities: 2-acrylamido-2-methyl propanesulfonic acid (AMPS), 2-hydroxyethyl methacrylate (HEMA), and 2-hydroxyl-3-(diethanolamino)propylmethacrylate (DEAPMA). The resultant PEMs were macroscopically homogeneous but contained microscopic heterogeneity in the form of dispersed nanosize AMPS domains with radiating (HEMA-DEAPMA) segments in the TCPB matrix, forming an overall amphiphilic matrix. Formation of such a texture was consequential upon the association of AMPS units and hydrogen bonding between the HEMA and DEAPMA short blocks of the hydrophilic copolymer with TCPB. The polymer blend membranes therefore acquired dual functionalities, i.e., effective proton transport between AMPS granules through interconnecting (HEMA-DEAPMA) segments, resulting in proton conductivity of the order of 10(-2) S/cm, and low water uptake and inhibited methanol passage in the continuous amphiphilic matrix, resulting in methanol permeability of (1.25-8) x 10(-7) cm2/s, which is about 3-8 times smaller than that of Nafion117.     

Layer-by-layer deposition of rhenium-containing hyperbranched polymers and fabrication of photovoltaic cells

Multilayer thin films were prepared by the layer-by-layer (LBL) deposition method using a rhenium-containing hyperbranched polymer and poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (PTEBS). The radii of gyration of the hyperbranched polymer in solutions with different salt concentrations were measured by laser light scattering. A significant decrease in molecular size was observed when sodium trifluoromethanesulfonate was used as the electrolyte. The conditions of preparing the multilayer thin films by LBL deposition were studied. The growth of the multilayer films was monitored by absorption spectroscopy and spectroscopic ellipsometry, and the surface morphologies of the resulting films were studied by atomic force microscopy. When the pH of a PTEBS solution was kept at 6 and in the presence of salt, polymer films with maximum thickness were obtained. The multilayer films were also fabricated into photovoltaic cells and their photocurrent responses were measured upon irradiation with simulated air mass (AM) 1.5 solar light. The open-circuit voltage, short-circuit current, fill factor, and power conversion efficiency of the devices were 1.2 V, 27.1 mu A cm(-2), 0.19, and 6.1x10(-3) %, respectively. The high open-circuit voltage was attributed to the difference in the HOMO level of the PTEBS donor and the LUMO level of the hyperbranched polymer acceptor. A plot of incident photon-to-electron conversion efficiency versus wavelength also suggests that the PTEBS/hyperbranched polymer junction is involved in the photosensitization process, in which a maximum was observed at approximately 420 nm. The relatively high capacitance, determined from the measured photocurrent rise and decay profiles, can be attributed to the presence of large counter anions in the polymer film.     

Synthesis and luminescence of zinc and europium alpha-thiophene carboxylate polymer

The zinc and europium alpha-thiophene carboxylate polymer with very strong red luminescence was prepared by rheological phase reaction method from zinc acetate, europium oxide and alpha-thiophenecarboxylic acid. Molecular weight, thermal analyses and X-ray diffraction pattern were measured. 1H NMR, 13C NMR, IR, XPS, UV, excitation and emission spectra were studied. The polymer with amorphous structure and 7.565x10(5) g/mol weight-average molecular exhibited excellent solubility in common organic solvents and better thermal stability under 270 degrees C in air. The quantum yield of the polymer in acetone was 0.6 relative to quinoline in 0.05 mol/l H(2)SO(4) solution. The energy of the pi,pi(*) excited state of C(4)H(3)SCO(2)(-) can be transferred to Eu(3+) ion resulting in emission from the 5D(0)-->(7)F(j) of Eu(3+) ion through the polymeric chains. Zn(2+) can effectively enhance the luminescence of Eu(3+) in alpha-thiophenecarboxylate polymer.     

Synthesis of highly monodisperse particles composed of a magnetic core and fluorescent shell

Highly monodisperse particles composed of a magnetic silica core and fluorescent polymer shell were synthesized with a combined technique of heterocoagulation and soap-free emulsion polymerization. Prior to heterocoagulation, monodisperse, submicrometer-sized silica particles were prepared with the Stober method, and magnetic nanoparticles were prepared with a modified Massart method in which a cationic silane coupling agent of N-trimethoxysilylpropyl- N, N, N-trimethylammonium chloride was added just after coprecipitation of Fe (2+) and Fe (3+). The silica particles with negative surface potential were heterocoagulated with the magnetic nanoparticles with positive surface potential. The magnetic silica particles obtained with the heterocoagulation were treated with sodium silicate to modify their surfaces with silica. In the formation of a fluorescent polymer shell onto the silica-coated magnetic silica cores, an amphoteric initiator of 2,2'-azobis[ N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was used to control the colloidal stability of the magnetic cores during the polymer coating. The polymerization of St in the presence of a hydrophobic fluorophore of pyrene could coat the cores with fluorescent polymer shells, resulting in monodisperse particles with a magnetic silica core and fluorescent polymer shell. Measurements of zeta potential for the composite particles in different pH values indicated that the composite particles had an amphoteric property originating from VA-057 initiator.     

由α-萘乙酸构筑的一维铜(Ⅱ)配位聚合物的合成、结构和性质研究

合成了一维聚合物[Cu(NAA)2]n(HNAA=α-萘乙酸),采用单晶X-射线、FTIR和元素分析对生成的晶体进行了结构表征。该聚合物属于正交晶系,Pbcn空间群,a=3.077 2(3)nm,b=1.272 56(11)nm,c=1.023 51(9)nm,V=4.008 0(6)nm3,Z=8。Cu髤的配位几何构型是五配位的扭曲四方锥,配体的羧基采用μ2-η1∶η1和μ3-η2∶η1两种不同的桥联配位模式,连结Cu髤离子形成1D链,1D链又被C-H-π作用力进一步连结形成2D层和3D固态超分子结构。磁性研究表明:在该聚合物中,相邻铜离子间存在反铁磁偶合作用。还对其热稳定性进行了研究。     

Al2O3-coated 3-N-propylpyridinium chloride silsesquioxane polymer film: preparation and electrochemical property study of adsorbed cobalt tetrasulfophthalocyanine

Porous Al2O3 presenting a specific surface area of SBET = 105 m2 g(-1) was coated with 3-N-propylpyridinium chloride silsesquioxane polymer. The ion exchange capacity of this polymer grafted onto an Al2O3 surface, resulting in a material designated as AlSiPy(+)Cl-, was 1.09 mmol g(-1). Furthermore, a cobalt(II) tetrasulfophthalocyanine anionic complex was immobilized on the chemically modified surface by an ion exchange reaction with a yield of 40 micromol g(-1) (the surface density of the electroactive species is 3.80 x 10(-11) mol cm(-2)). The electrochemical properties of the material obtained, AlSiPy/CoTsPc, were tested for the catalytic oxidation of oxalic acid at 0.77 V vs SCE in 1.0 mol l(-1) KCl solution. Furthermore, a chronoamperometric technique was used with the electrode to test its potential use as a sensor for oxalic acid. The electrode response to oxalic acid concentrations between 1.0 and 3.5 mmol l(-1) was linear with an estimated detection limit of 0.5 mmol l(-1). The charge transfer resistance of the material, measured using the electrochemical impedance spectroscopy technique, was 43 Omega cm2.     

HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique

A new method for the synthesis of sulfamethazine-imprinted polymer on the surface of silica via quasi-living radical polymerization and the application of the resulting polymer in determination of the SMZ in milk is developed. In the synthesis, initiator-transfer agent-terminator (iniferter) was immobilized on the silica surface using chemical reagents with good availability. The imprinting polymerization was initialized by the silica-supported iniferter under the UV radiation. The molecularly imprinted polymer (MIP) layer grafted on the silica surface was constructed by using sulfamethazine (SMZ) as the template, methacrylic acid (MAA) as the functional monomer and ethylene dimethacrylate (EDMA) as cross-linker. The resulting MIP-silica has good selectivity for SMZ and high column efficiency in the HPLC analysis. The result demonstrated that the SMZ-imprinted polymer was grafted on the silica surface successfully. Under the optimized HPLC condition, the MIP-silica has been used for the determination of SMZ in milk. The method was linear over the concentration range of 0.1-50 microgmL(-1) with correlation coefficient R>0.999. The detection limit for SMZ was 25 ngmL(-1). The recoveries were above 78% at the spiked concentration of 0.024, 0.24 and 0.48 microgmL(-1).     

Photo-controlled/living radical polymerization of 2-(dimethylamino)ethyl methacrylate using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as a mediator

The photo-controlled/living radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) was attained using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator and (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) (r-AMDV) as the initiator. The bulk polymerization of DMAEMA produced a polymer with a comparatively narrow molecular weight distribution below 1.6. The first-order time conversion plots showed a linear increase. The molecular weight of the resulting polymer also increased with an increase in the monomer conversion. The molecular weights of the resulting polymers were in good agreement with the theoretical molecular weights. A linear correlation was also obtained for the plots of the molecular weight vs. the reciprocal of the initial concentration of r-AMDV. The GPC analysis demonstrated the living nature of the polymerization based on the fact that the curves were shifted to the higher molecular weight side without deactivation as the conversion increased.