Adjusting the chromatographic properties of poly(ionic liquid)‐modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)‐modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)‐modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)‐modified stationary phases can provide various interactions toward solutes. Compared to the cyano‐functionalized poly(ionic liquid) stationary phase, the tetrazolyl‐functionalized poly(ionic liquid) stationary phase provides additional cation‐exchange and π‐π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti‐inflammatory drugs.     

Double hydrophilic diblock copolymers containing a poly(ionic liquid) segment: Controlled synthesis, solution property, and application as carbon precursor

In this contribution, we demonstrate the controlled synthesis of double hydrophilic block copolymers comprising a hydrophilic poly(ionic liquid) (PIL) segment via the RAFT/MADIX process. The non-ionic segment is made up from either poly(N-isopropylacrylamide) (PNIPAAm) or poly(N,N-dimethylacrylamide) (PDMA), due to their favorable controllable solubility in water at room temperature. They were employed as macro-chain transfer agents (macro-CTAs) for the RAFT polymerization of four different 1-vinylimidazolium ionic liquid monomers possessing different alkyl substitutes and anions. The block copolymers of PNIPAAm-b-PIL are dual stimuli-responsive copolymers that can respond to the changes in temperature and ionic strength in aqueous solution. This special property facilitated a facile anion exchange of the PIL segment. In addition, one copolymer could successfully be employed as carbon precursor for the preparation of mesoporous graphitic nanostructures in the presence of metal salts.     

Poly(ionic liquid)s: a new material with enhanced and fast CO2 absorption

Novel sorbent and membrane materials for CO2 separation, poly(ionic liquid)s made from ionic liquid monomers, poly[p-vinylbenzyltrimethyl ammonium tetrafluoroborate](P[VBTMA][BF4]) and poly[2-(methacryloyloxy)ethyltrimethylamnonium tetrafluoroborate](P[MATMA][BF4]) have absorption capacities 7.6 and 6.0 times of those of room-temperature ionic liquids, e.g.[bmim][BF4], respectively, with reversible and fast sorption and desorption.     

Some Aspects of Ionic Liquids as Diverse and Versatile Sustainable Solvents

In this mini review several particular cases of ionic liquid solution behavior are discussed, namely solutions of ionic liquids with aliphatic alcohols, polyalcohols, arenes, chloromethanes and poly(ethyleneglycol) as well as salting-out and salting-in effects. The presented cases clearly expose ionic liquids as being diverse and versatile sustainable solvents that exhibit flexible phase behavior and, consequently, variable phase diagrams. These can be tuned either by changing the length of the alkyl chain(s) of the ionic liquid??s cation (and/or sometimes the anion), or by introducing a different aliphatic nature to the other solution constituent (e.g., by varying polymer chain length or the number of carbon atoms in chloromethanes). Sometimes, the evolution of the phase diagrams is fine and continuous, showing several consecutive stages, revealing both qualitative and quantitative changes. Finally, the diversity and versatility of ionic liquids are viewed as important features that contribute to their efficiency as tunable solvents or salting media.     

聚离子液体催化碳酸乙烯酯与甲醇的酯交换反应

通过N-乙烯基咪唑鎓离子液体、 丙烯酸钠(NaAA)和交联剂二乙烯基苯(DVB)或1-乙烯基-3-三乙二醇基咪唑溴盐{[(EG)₃-DVIm]Br₂)}自由基聚合合成了一系列含羧酸根的聚离子液体. 将所合成的聚离子液体用于催化甲醇与碳酸乙烯酯(EC)酯交换反应制备碳酸二甲酯(DMC). 研究结果表明, 在甲醇和EC混合溶剂中具有最大溶胀度的聚离子液体催化剂poly[VOIm-AA-DVIm]活性最高. 在优化反应条件[120 ℃, 6 h, 1.0%(摩尔分数)催化剂用量, n(甲醇)/n(EC)=10∶1]下, DMC收率为76.6%, 选择性为90.1%, 达到了与均相催化剂1-丁基-3-甲基咪唑醋酸盐([BMIm]OAc)相当的活性.     

Combined Application of Ionic Liquid and Hybrid Poly (Ionic Liquid)-Bonded Silica: An Alternative Method for Extraction,Separation and Determination of Flavonoids from Plants

Hybrid poly (ionic liquid)-bonded silica was combined with an ionic liquid solution for the extraction, separation, and determination of flavonoids from natural plants by using a multi-phase dispersive extraction (MPDE) method. The hybrid material was synthesized using a facile method. A suitable sorbent was identified based on the adsorption behaviors of flavonoids on different poly (ionic liquid)-bonded silicas. In contrast to traditional matrix solid-phase dispersion (MSPD) method, the target analytes were first extracted by three-phase (sample-solvent-sorbent) dispersive extraction with ionic liquid (1-oxyl-3-methylimidazolium bromide) solutions as the solvent, and then cleaned up after removal from the sample matrix, called MPDE. This process combines the advantages of ionic liquids, ionic liquid-based sorbent, and MPDE. The recovery rates were achieved by MPDE of the flavonoids from Chamaecyparis obtusa: 76.4% for myricetin and 90.3% for amentoflavone. The proposed method may be used to extract and separate other flavonoids or even polyphenolic compounds from complex samples.     

聚季铵盐离子液体材料制备及其对蛋白质吸附性能评价

通过一步合成法制备了两种可聚合季铵盐离子液体功能单体,并通过沉淀聚合法合成了相应的聚离子液体聚合物。对产物进行了核磁共振、扫描电镜、热重分析等表征。结果表明:所制备的两种材料粒径均匀,约为600 nm的椭球形颗粒,颗粒之间有相互粘连。通过对牛血清白蛋白(BSA)、卵清蛋白(OVA)、牛血红蛋白(BHb)、溶菌酶(Lys)、胰蛋白酶(Try)5种蛋白质的吸附性能实验,考察了聚季铵盐离子液体材料对蛋白质的吸附性能。考察结果表明:两种聚离子液体材料均对蛋白质具有一定的吸附性能。其中以4-乙烯基苄氯季铵盐离子液体为功能单体制备的聚离子液体材料对胰蛋白酶的吸附性能最好,是一种具有良好应用前景的材料。     

Poly(ionic liquid)s as new materials for CO2 absorption

A series of imidazolium‐based ionic liquid monomers and their corresponding polymers (poly(ionic liquid)s) were synthesized, and their CO₂ sorption was studied. The poly(ionic liquid)s had enhanced CO₂ sorption capacities and fast sorption/desorption rates compared with room temperature ionic liquids. The effects of the chemical structures, including the types of anion, cation, and backbone of the poly(ionic liquid)s on their CO₂ sorption have been discussed. In contrast to room temperature ionic liquids, the polymer with PF anions had the highest CO₂‐sorption capacity, while those with BF or Tf₂N^? anions had the same capacities. The CO₂ sorption and desorption of the polymers were fast and reversible, and the sorption was selective over H₂, N_2, and O₂. The measured Henry's constants of P[VBBI][BF₄] and P[MABI][BF₄] were 26.0 bar and 37.7 bar, which were lower than those of similar room temperature ionic liquids. The preliminary study of the mechanism indicated that the CO₂ sorption of the polymer particles was more absorption (the bulk) but less adsorption (the surface). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5477–5489, 2005     

聚离子液体材料在分离科学中的研究进展

离子液体作为新型离子化试剂,具有诸多优越的物理化学性质,比如:良好的溶解性、导电性、热稳定性、生物相容性及低蒸气压和不易燃等特点,近年来在分析化学领域得到广泛关注。聚离子液体材料结合了离子液体和聚合物的双重性质,已经成为分离科学研究的前沿领域。本文详细讨论了离子液体与目标物之间的多种作用机制,比如亲/疏水作用、氢键作用、离子交换、π - π 堆积及静电吸附作用等等,总结了聚离子液体材料在固相萃取、液相色谱、气相色谱、毛细管电泳及毛细管电色谱等领域的研究进展;最后,对聚离子液体材料的发展前景进行了展望。     

Electrorheological effect in hybrid fluids with liquid crystalline additives

Conventional electrorheological (ER) fluids consist of electrically polarizable particles dispersed in an inert insulating liquid. They are characterized by a development of a yield stress upon application of an external electric field. They resemble Bingham fluids with yield stress value depending on electric field. A viscosity increase in the presence of an electric field has been also found in homogeneous solutions of liquid crystalline polymers with no yield stress observed. In this study these two types of fluids and combined dispersions of the solid particles in the liquid crystalline matrix were investigated. A lyotropic liquid crystalline polymer—poly(n‐hexyl isocyanate) (PHIC)—dissolved in xylene was chosen as the active matrix. The dispersed solid phase was comprised of two kinds of polymers: pyrolyzed polyacrylonitryle (PAN) showing electron conductivity, and PAN doped with two salts (KSCN, NaSCN), resulting in ionic conductivity. The rheological measurements under an electric field were performed. The pristine xylene solution of PHIC was characterized first as well as the 15% m/m dispersions of PAN powders in silicone oil. Then the dispersions in the liquid crystalline matrix were investigated showing a strong ER effect whose magnitude was considerably enhanced in comparison to both ER active components measured separately. Copyright © 2006 John Wiley & Sons, Ltd.     

Morphological change of thermosensitive imidazolium‐based poly(ionic liquid)/poly(phenylethylmethacrylate) composite particles

Composite particles comprising poly(2‐phenylethyl methacrylate) (PPhEMA) and imidazolium‐based poly(ionic liquid)s were prepared by suspension polymerization of 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide as an ionic liquid monomer with dissolved PPhEMA. Not only PPhEMA exhibits lower critical solution temperature (LCST) behavior in 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide but also the polymer blend in the bulk state exhibited LCST behavior. However, the composite polymer particles obtained after polymerization at 70°C maintained a homogeneous inner structure after heat treatment as the polymerization temperature was greater than the LCST in this system due to the formation of a cross‐linked structure during polymerization. When the composite particles were prepared by suspension polymerization at 30°C, their inner morphology changed from homogeneous to phase separated during the subsequent heat treatment. Moreover, the morphology transformation of the composite particles was dependent on the PPhEMA molecular weight. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(ionic liquid)‐Mediated Morphogenesis of Bismuth Sulfide with a Tunable Band Gap and Enhanced Electrocatalytic Properties

Conventional polymer additives have a substantial impact on synthetic inorganic chemistry, but critical shortcomings remain; for example, low solubility in organic solvents and potential thermodynamic aggregates. Poly(ionic liquid)s have now been used as efficient additives that enable a high level control of bismuth sulfide crystals with significant size and morphological diversities. The bismuth sulfides exhibit tunable band structure as a result of the quantum size effects. Moreover, poly(ionic liquid)s are able to couple with as‐synthesized bismuth sulfides chemically and endow a modified surface electronic structure, which allows resultant products to possess outstanding electrocatalytic performance for water oxidation, although its commercial counterpart is catalytically inert.     

High‐throughput microscale extraction using ionic liquids and derivatives: A review

Ionic liquids and derivatives—mainly polymeric ionic liquids and magnetic ionic liquids—have been extensively used in microscale extraction over the past few years. Current trends in analytical sample preparation gear toward linking microextraction approaches with high‐throughput sample processing to comply with green analytical chemistry requirements. A variety of high sample throughput strategies that are coupled to both ionic‐liquid‐based solid‐phase microextraction and ionic liquid‐based liquid‐phase microextraction are herein reported. The review is focused on microscale extraction methods that use (i) custom‐made and dedicated extraction devices, (ii) parallel extraction, (iii) magnetic‐based separation, and (iv) miniaturized systems employing semi‐automatic or fully automatic flow injection methods, related micro/millifluidic devices, and robotic equipment.     

Stable performance of an all-solid-state Li metal cell coupled with a high-voltage NCA cathode and ultra-high lithium content poly(ionic liquid)s-based polymer electrolyte

Journal of Solid State Electrochemistry - A poly(ionic liquid)s binder can provide stable performance of high-voltage composite cathodes based on lithium nickel cobalt aluminium oxide...     

Study of Cryostructuring of Polymer Systems: 25. The Influence of Surfactants on the Properties and Structure of Gas-Filled (Foamed) Poly(vinyl alcohol) Cryogels

Foamed poly(vinyl alcohol) (PVA) cryogels are studied. Such heterogeneous gel composites are formed as a result of the cryogenic treatment (freezing—storage in a frozen state—thawing) of water— PVA liquid foams in the absence and presence of surfactants. It is shown that the addition of ionic and nonionic surfactants to an aqueous PVA solution and its subsequent foaming result in the formation of liquid foam whose stability is lower than that of the foam prepared from an aqueous PVA solution in the absence of surfactant, i.e., surfactants cause a destabilizing effect on the foams containing PVA. Gas-filled PVA cryogels formed as a result of freezing—thawing of such foams contain large (up to ～180 μm) pores (air bubbles incorporated into the matrix of heterogeneous gel). Mechanical and thermal properties of cryogels depend on the nature and concentration of surfactants, as well as on the regime of cryogenic treatment. The rigidity of foamed PVA cryogels prepared in the presence of sodium dodecyl sulfate and cetyltrimethylammonium bromide ionic surfactants is lower and that in the presence of nonionic decaoxyethylene cetyl ether is higher than for equiconcentrated (by the polymer) foamed PVA cryogel containing no surfactant. Microscopic studies and the analysis of obtained images of cryogel structure demonstrate that the effect of surfactant on the morphology of freezing foam can be different, depending on the type of surfactant added to the initial system. This leads to foam-destabilizing effects such as the collapse, deformation, and coalescence of air bubbles; the failure of gel phase structure near the bubble surface; etc. However, the complete disintegration of the foamed structure is prevented by a very high viscosity of the unfrozen liquid microphase of a macroscopically solid sample and by the cryotropic PVA gelation that fixes the structure of partially destroyed foam.     

Dissociation pathways of protic ionic liquid clusters: Alkylammonium nitrates

Protic ionic liquids are promising candidates for many applications, including as spacecraft propellants. For both fundamental interest and understanding clustering and dissociation during electrospray‐based propulsion, it is useful to explore the dissociation pathways of protic ionic liquid clusters, as well as the factors affecting the relative contributions of each pathway to the observed MS/MS spectra. With that said, most of the published reports on ionic liquid cluster dissociation have focused on aprotic ionic liquids. The purpose of the current work is to explore the dissociation pathways (eg, loss of amine, nitric acid, or ion pair) of alkylammonium nitrates using energy‐resolved collision‐induced dissociation. Here, it was found that, in general, protic ionic liquids have multiple dissociation pathways—namely, protic ionic liquids can lose their neutralized cation (here, an alkylamine) or neutralized anion (here, nitric acid)—in addition to the ion pair dissociation familiar to aprotic salt and aprotic ionic liquid clusters. In general, increasing the basicity of the cation (here, through increasing the degree of alkylation) decreases the propensity to follow these alternative pathways. Interestingly, increasing the cluster size has a similar effect: as cluster size increases, nitric acid loss decreases. These results will help better model and design protic ionic liquids for electrospray‐based spacecraft propulsion and help provide a better understanding for the general behavior of protic ionic liquids versus aprotic ionic liquids within mass spectrometers.     

Comparison Between Two Different Synthetic Routes of Pyrrolidinium Functional Polymeric Ionic Liquids

Summary: Two separate synthetic routes of preparation of new pyrrolidinium-based polymeric ionic liquids were compared. The first method utilized the modification of a commercial poly(diallyldimethylammonium) chloride via a direct anion exchange with several anions. The second route involved the anion exchange leading to several diallyldimethylammonium ionic liquid monomers having different anions and a subsequent polymerization. The latter method is particularly interesting for attaining tunable copolymers according to the desired properties of PILs. Both methods successfully resulted in ionic liquid polymers that are finding their way in a wide range of emerging applications.     

Self-assembly of poly(ionic liquid)s: polymerization, mesostructure formation, and directional alignment in one step

This paper reports on the highly ordered and tunable inner structure of poly(ionic liquid) nanoparticles, which formed spontaneously by precipitation polymerization from water. Without added stabilizer, these "latexes" are much smaller (20-40 nm in diameter) than usual polymer latexes and exhibit either multilamellar or unilamellar vesicular morphology, depending on the tail length of the quaternizing alkyl chains. The simplicity in the synthesis and composition and the high complexity of the ordered structures that resemble liposomes expand the classical profile of homopolymer self-assembly. In addition, unidirectional superassembly to a nanoworm mesostructure is found at elevated concentrations, indicating that the ionic liquid liposomes are apt to integrate into further hierarchical assembly schemes.     

Microwave‐assisted preparation of poly(ionic liquids)‐modified magnetic nanoparticles for pesticide extraction

Novel poly(ionic liquids) were synthesized and immobilized on prepared magnetic nanoparticles, which were used to extract pesticides from fruit and vegetable samples by dispersive solid‐phase extraction prior to high‐performance liquid chromatography analysis. Compared with monomeric ionic liquids, poly(ionic liquids) have a larger effective contact area and higher viscosity, so they can achieve higher extraction efficiency and be used repeatedly without a decrease in analyte recovery. The immobilized poly(ionic liquids) were rapidly separated from the sample matrix, providing a simple approach for sample pretreatment. The nature and volume of the desorption solvent and amount of poly(ionic liquid)‐modified magnetic material were optimized for the extraction process. Under optimum conditions, calibration curves were linear (R² > 0.9988) for pesticide concentrations in the range of 0.100–10.000 μg/L. The relative standard deviations for repeated determinations of the four analytes were 2.29–3.31%. The limits of detection and quantification were 0.29–0.88 and 0.97–2.93 μg/L, respectively. Our results demonstrate that the developed poly(ionic liquid)‐modified material is an effective absorbent to extract pesticides from fruit and vegetable samples.     

Polyelectrolyte complexation between poly(methacrylic acid,sodium salt) and poly(diallyldimethylammonium chloride) or poly[2‐(methacryloyloxyethyl) trimethylammonium chloride]

Polyelectrolyte complexes between poly(methacrylic acid, sodium salt) and poly(diallyldimethylammonium chloride) (PDADMAC) or poly[2‐(methacryloyloxyethyl)trimethylammonium chloride] (PMOETAC) form gels, liquid phases, or soluble complexes depending on charge ratio, total polymer loading, polymer molecular weight, and ionic strength. Increasing the ionic strength of the medium led most polyelectrolyte pairs to transition from gel through liquid complexes (complex coacervate) to soluble complexes. These transitions shift to higher ionic strengths for higher molecular weight polymers, as well as for PMOETAC compared to PDADMAC. The complex phases swelled with increasing polymer loading, ultimately merging with the supernatant phase at a critical polymer loading. The isolated liquid complex phases below and above this critical loading were temperature‐sensitive, showing cloud points followed by macroscopic phase separation upon heating. Incorporating 5 mol % lauryl methacrylate into the polyanion led to increased complex yield with PDADMAC, and increased resistance to ionic strength. In contrast, incorporating 30 mol % of oligo(ethylene glycol) methacrylate into the polyanion led to decreased complex yield, and to lower resistance to ionic strength. Two polyelectrolyte systems that produced liquid complexes were used to encapsulate hydrophobic oils, and in one case were used to demonstrate the feasibility of crosslinking the resulting capsule walls. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4129–4143, 2007