Protein quantification by selective isolation and fragmentation of isotopic pairs using FT-ICR MS

Isolation of tryptic peptide ions, along with their differentially labeled analogs derived from an artificial QconCAT protein, is performed using multiple correlated harmonic excitation fields in an FT-ICR cell. Simultaneous fragmentation of the isolated unlabeled and labeled peptide pairs using IRMPD yields specific y-series fragment ions useful for quantification. The mass increment attributed to stable isotope labeling at the C-terminus is maintained in the C-terminal fragment ions, providing multiple measurements of labeled/unlabeled intensity ratios during highly selective detection. The utility of this approach has been demonstrated in the absolute quantification of components of an unfractionated chicken muscle protein mixture.     

Simultaneous detection of N-terminal fragment ions in a protein mixture using a ruthenium(II) complex

Use of a bis(terpyridine)ruthenium(II) derivative as an N-terminal labeling reagent resulted in the simultaneous detection and individual determination of all the N-terminal fragments of the proteins in a mixture without requiring any separation. All of the N-termini of the guanidinated proteins were labeled selectively by the ruthenium complex (-CO-labeling). After chymotryptic digestion, the fragments were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and post-source decay (PSD). The -CO moiety exclusively enhanced N-terminal fragment ions in mass spectra and enabled easy N-terminal sequencing. In a mixture containing three different proteins (lysozyme, ubiquitin, and insulin), all of the N-terminal fragment ions labeled with the ruthenium complex were found to produce uniformly intense peaks without the detection of the other unlabeled fragments. The N-terminal sequences of these ions were determined individually by PSD analysis. Application to unknown proteins from Thermus thermophilus HB8 with two-dimensional electrophoretic separation resulted in the successful determination of the N-terminal sequence and easy identification of the target protein.     

Label Scrambling During CID of Covalently Labeled Peptide Ions

Covalent labeling along with mass spectrometry is finding more use as a means of studying the higher order structure of proteins and protein complexes. Diethylpyrocarbonate (DEPC) is an increasingly used reagent for these labeling experiments because it is capable of modifying multiple residues at the same time. Pinpointing DEPC-labeled sites on proteins is typically needed to obtain more resolved structural information, and tandem mass spectrometry after protein proteolysis is often used for this purpose. In this work, we demonstrate that in certain instances, scrambling of the DEPC label from one residue to another can occur during collision-induced dissociation (CID) of labeled peptide ions, resulting in ambiguity in label site identity. From a preliminary study of over 30 labeled peptides, we find that scrambling occurs in about 25% of the peptides and most commonly occurs when histidine residues are labeled. Moreover, this scrambling appears to occur more readily under non-mobile proton conditions, meaning that low charge-state peptide ions are more prone to this reaction. For all peptides, we find that scrambling does not occur during electron transfer dissociation, which suggests that this dissociation technique is a safe alternative to CID for correct label site identification. Graphical Abstract

?     

Trypsin catalyzed 16O-to-18O exchange for comparative proteomics: tandem mass spectrometry comparison using MALDI-TOF,ESI-QTOF,and ESI-ion trap mass spectrometers

Quantitative or comparative proteome analysis was initially performed with 2-dimensional gel electrophoresis with the inherent disadvantages of being biased towards certain proteins and being labor intensive. Alternative mass spectrometry-based approaches in conjunction with gel-free protein/peptide separation have been developed in recent years using various stable isotope labeling techniques. Common to all these techniques is the incorporation, biosynthetically or chemically, of a labeling moiety having either a natural isotope distribution of hydrogen, carbon, oxygen, or nitrogen (light form) or being enriched with heavy isotopes like deuterium, (13)C, (18)O, or (15)N, respectively. By mixing equal amounts of a control sample possessing for instance the light form of the label with a heavy-labeled case sample, differentially labeled peptides are detected by mass spectrometric methods and their intensities serve as a means for direct relative protein quantification. While each of the different labeling methods has its advantages and disadvantages, the endoprotease (16)O-to-(18)O catalyzed oxygen exchange at the C-terminal carboxylic acid is extremely promising because of the specificity assured by the enzymatic reaction and the labeling of essentially every protease-derived peptide. We show here that this methodology is applicable to complex biological samples such as a subfraction of human plasma. Furthermore, despite the relatively small mass difference of 4 Da between the two labeled forms, corresponding to the exchange of two oxygen atoms by two (18)O isotopes, it is possible to quantify differentially labeled proteins on an ion trap mass spectrometer with a mass resolution of about 2000 in automated data dependent LC-MS/MS acquisition mode. Post column sample deposition on a MALDI target parallel to on-line ESI-MS/MS enables the analysis of the same compounds by means of ESI- and MALDI-MS/MS. This has the potential to increase the confidence in the quantification results as well as to increase the sequence coverage of potentially interesting proteins by complementary peptide ionization techniques. Additionally the paired y-ion signals in tandem mass spectra of (16)O/(18)O-labeled peptide pairs provide a means to confirm automatic protein identification results or even to assist de novo sequencing of yet unknown proteins.     

Studies on the biogenesis of an enzymatically active complex III of the respiratory chain from yeast mitochondria

Complex III isolated from yeast mitochondria catalyzed an antimycin A and Diuron-sensitive coenzyme QH2-cytochrome c reductase activity with a turnover number of 15.7 sec(-1) and contained 10 nmoles of cytochrome b and 4.6 nmoles of cytochrome c1 per mg of protein. Electrophoresis in sodium dodecyl sulfate acrylamide gels resolved Complex III into 10 bands with apparent molecular weights of 50,000, 40,000, 30,000, 29,000, 24,000, 17,000, 16,000, 12,000, 8,400, and 5,800. Yeast cells were labeled under nongrowing conditions with (35S)-methionine in the absence or presence of inhibitors of cytoplasmic or mitochondrial protein synthesis. Labeled Complex III was isolated by immunoprecipitation from detergent-solubilized mitochondria using anti-serum raised against the purified complex. Analysis of the immunoprecipitates by polyacrylamide gel electrophoresis revealed that a 30,000-dalton protein, cytochrome b, as well as 16,000-dalton protein were labeled in the presence of cycloheximide, indicating that they are products of mitochondrial protein synthesis. Immunoprecipitates from mitochondria obtained from cells labeled in the presence of chloramphenicol contained a new radioactive peak with a molecular weight of 100,000. In addition, significant decreases in the labeling of the proteins with molecular weights of 50,000, 40,000, 30,000, and 16,000 were observed. When Complex III was isolated by immunoprecipitation from intact spheroplasts after a 5-minute pulse with (35S)-methionine, the 100,000-dalton protein was labeled in the immunoprecipitate whether or not chloramphenicol was present; however, after a 1-hour chase with unlabeled methionine, decreased labeling of the 100,000-dalton protein was observed concomitant with an increased labeling of the 50,000- and 40,000-dalton proteins. These results suggest that a protein with a molecular weight of 100,000 may either be a precursor or a partially assembled form of other proteins of Complex III, most probably the two largest polypeptides.     

Differential labeling of free and disulfide-bound thiol functions in proteins

A method for the simultaneous determination of the number of free cysteine groups and disulfide-bound cysteine groups in proteins has been developed based on the sequential labeling of free and bound thiol functionalities with two ferrocene-based maleimide reagents. Liquid chromatography/electrochemistry/mass spectrometry was used to assign the N-(2-ferroceneethyl)maleimide (FEM) labeled free cysteine functionalities in a tryptic digest mixture, whereas a precursor ion scan enables the detection of peptides with ferrocenecarboxylic acid-(2-maleimidoyl)ethylamide (FMEA) labeled disulfide-bound cysteine groups after reduction. Fragment spectra of the labeled peptides yield an excellent coverage of b-type and y-type ions. The ferrocene labeled cysteines were fragmented as 412 Da (FEM) and 455 Da (FMEA). These fragment masses are significantly higher than unlabeled amino acids or dipeptides and are easily detected. The position of free and disulfide-bound cysteine may therefore be assigned in an amino acid sequence.     

Cleavable biotin probes for labeling of biomolecules via azide-alkyne cycloaddition

The azide-alkyne cycloaddition provides a powerful tool for bio-orthogonal labeling of proteins, nucleic acids, glycans, and lipids. In some labeling experiments, e.g., in proteomic studies involving affinity purification and mass spectrometry, it is convenient to use cleavable probes that allow release of labeled biomolecules under mild conditions. Five cleavable biotin probes are described for use in labeling of proteins and other biomolecules via azide-alkyne cycloaddition. Subsequent to conjugation with metabolically labeled protein, these probes are subject to cleavage with either 50 mM Na(2)S(2)O(4), 2% HOCH(2)CH(2)SH, 10% HCO(2)H, 95% CF(3)CO(2)H, or irradiation at 365 nm. Most strikingly, a probe constructed around a dialkoxydiphenylsilane (DADPS) linker was found to be cleaved efficiently when treated with 10% HCO(2)H for 0.5 h. A model green fluorescent protein was used to demonstrate that the DADPS probe undergoes highly selective conjugation and leaves a small (143 Da) mass tag on the labeled protein after cleavage. These features make the DADPS probe especially attractive for use in biomolecular labeling and proteomic studies.     

Intracellular protein labeling with prodrug-like probes using a mutant β-lactamase tag

Intracellular protein labeling with small molecular probes that do not require a washing step for the removal of excess probe is greatly desired for real-time investigation of protein dynamics in living cells. Successful labeling of proteins on the cell membrane has been performed using mutant β-lactamase tag (BL-tag) technology. In the present study, intracellular protein labeling with novel cell membrane permeable probes based on β-lactam prodrugs is described. The prodrug-based probes quickly permeated the plasma membranes of living mammalian cells, and efficiently labeled intracellular proteins at low probe concentrations. Because these cell-permeable probes were activated only inside cells, simultaneous discriminative labeling of intracellular and cell surface BL-tag fusion proteins was attained by using cell-permeable and impermeable probes. Thus, this technology enables adequate discrimination of the location of proteins labeled with the same protein tag, in conjunction with different color probes, by dual-color fluorescence. Moreover, the combination of BL-tag technology and the prodrug-based probes enabled the labeling of target proteins without requiring a washing step, owing to the efficient entry of probes into cells and the fast covalent labeling achieved with BL-tag technology after bioactivation. This prodrug-based probe design strategy for BL-tags provides a simple experimental procedure with application to cellular studies with the additional advantage of reduced stress to living cells.     

Rapid analysis of covalently and non-covalently fluorophore-labeled proteins using ultra-thin-layer sodium dodecylsulfate gel electrophoresis

Gel electrophoresis is one of the most frequently used tools for the separation of complex biopolymer mixtures. In recent years, there has been considerable activity in the separation and characterization of protein molecules by sodium dodecylsulfate (SDS) gel electrophoresis with particular interest in using this technique to separate on the basis of size and to estimate molecular mass and protein purity. Although the method is informative, it is cumbersome, time consuming and lacks automation. In this paper we report an automated, high-performance SDS gel electrophoresis system that is based on electric-field-mediated separation of SDS-protein complexes using an ultra-thin-layer platform. The integrated fiber optic bundle-based scanning laser-induced fluorescence detection technology readily provided high sensitivity, real-time detection of the migrating solute molecules. Rapid separations of covalently and non-covalently labeled proteins were demonstrated in the molecular mass range 14,000 to 205,000 in less than 9 and 16 min, respectively. Excellent quantitation and lane-to-lane migration time reproducibility were found for all the solute components using the multilane separation platform. The limit of detection was found to be 1.5-3 ng/band for both labeling methods, with excellent linearity over a six times serial double-dilution range. Molecular mass calibration plots were compared for both covalently and non-covalently labeled proteins. A linear relationship was found between the molecular mass and electrophoretic mobility in the case of covalently labeled samples, while a non-linear relationship was revealed for the non-covalently labeled samples.     

Selective identification and quantitative analysis of methionine containing peptides by charge derivatization and tandem mass spectrometry

To enable the development of a tandem mass spectrometry (MS/MS) based methodology for selective protein identification and differential quantitative analysis, a novel derivatization strategy is proposed, based on the formation of a "fixed-charge" sulfonium ion on the side-chain of a methionine amino acid residue contained within a protein or peptide of interest. The gas-phase fragmentation behavior of these side chain fixed charge sulfonium ion containing peptides is observed to result in exclusive loss of the derivatized side chain and the formation of a single characteristic product ion, independently of charge state or amino acid composition. Thus, fixed charge containing peptide ions may be selectively identified from complex mixtures, for example, by selective neutral loss scan mode MS/MS methods. Further structural interrogation of identified peptide ions may be achieved by subjecting the characteristic MS/MS product ion to multistage MS/MS (MS3) in a quadrupole ion trap mass spectrometer, or by energy resolved "pseudo" MS3 in a triple quadrupole mass spectrometer. The general principles underlying this fixed charge derivatization approach are demonstrated here by MS/MS, MS3 and "pseudo" MS3 analysis of side chain fixed-charge sulfonium ion derivatives of peptides containing methionine formed by reaction with phenacylbromide. Incorporation of "light" and "heavy" isotopically encoded labels into the fixed-charge derivatives facilitates the application of this method to the quantitative analysis of differential protein expression, via measurement of the relative abundances of the neutral loss product ions generated by dissociation of the light and heavy labeled peptide ions. This approach, termed "selective extraction of labeled entities by charge derivatization and tandem mass spectrometry" (SELECT), thereby offers the potential for significantly improved sensitivity and selectivity for the identification and quantitative analysis of peptides or proteins containing selected structural features, without requirement for extensive fractionation or otherwise enrichment from a complex mixture prior to analysis.     

Protein identification via ion-trap collision-induced dissociation and examination of low-mass product ions

A whole-protein tandem mass spectrometry approach for protein identification based on precursor ion charge state concentration via ion/ion reactions, ion-trap collisional activation, ion/ion proton-transfer reactions involving the product ions, and mass analysis over a narrow m/z range (up to m/z 2000) is described and evaluated. The experiments were carried out with a commercially available electrospray ion-trap instrument that has been modified to allow for ion/ion reactions. Reaction conditions and the approach to searching protein databases were developed with the assumption that the resolving power of the mass analyzer is insufficient to distinguish charge states on the basis of the isotope spacings. Ions derived from several charge states of cytochrome c, myoglobin, ribonuclease A, and ubiquitin were used to evaluate the approach for protein identification and to develop a two-step procedure to database searching to optimize specificity. The approach developed with the model proteins was then applied to whole cell lysate fractions of Saccharomyces cerevisiae. The results are illustrated with examples of assignments made for three a priori unknown proteins, each selected randomly from a lysate fraction. Two of the three proteins were assigned to species present in the database, whereas one did not match well any database entry. The combination of the mass measurement and the product ion masses suggested the possibility for the oxidation of two methionine residues of a protein in the database. The examples show that this limited whole-protein characterization approach can provide insights that might otherwise be lacking with approaches based on complete enzymatic digestion.     

Metabolically stable isotope labeling prior to electrophoretic protein separation reveals differences in fractional synthesis rates between mitochondrial aldehyde dehydrogenase isoforms

Living mice were subjected to whole body labeling by intravenous infusion of [(13)C]glucose as the sole carbon source. After 10 h infusion the mice were sacrificed, and liver proteins were separated by two-dimensional polyacrylamide gel electrophoresis. Five spots were found to contain mitochondrial aldehyde dehydrogenase (ALDH2) by matrix assisted time of flight mass spectrometry protein identification. By measuring the isotopologue mass distributions of peptide ions, and modeling the (13)C content of the precursor amino acid pool, the fractional synthesis rate of ALDH2 molecules synthesized during the labeling period was determined. One of the five spots was observed to have a five-fold higher fraction of (13)C-containing newly synthesized ALDH2 than the spot with the highest ALDH2 content, and contained more than 60% of newly synthesized ALDH2 although it accounted for less than 20% of the total ALDH2 detected. The total range in the fraction of (13)C-containing proteins between different ALDH2 spots approached 50-fold. The ability to quantitatively characterize different protein isoforms of biological origin for ALDH2 and other proteins from living animals provides new avenues for the exploration of protein function.     

Fourier-transform mass spectrometry for automated fragmentation and identification of 5-20 kDa proteins in mixtures

When presented with a mixture of intact proteins, electrospray ionization with Fourier-transform mass spectrometry (ESI-FTMS) has the capability to obtain direct fragmentation information from isolated ions. However, the automation of this capability has not been achieved to date. We have developed software for unattended acquisition of protein tandem mass spectrometry (MS/MS) data and batch processing of the resulting files for identification of whole proteins. Mixtures of both protein standards (8-29 kDa) and Methanococcus jannaschii cytosolic proteins (up to six components + 20 kDa) were infused via an autosampler, and MS/MS data were acquired without human intervention. The acquisition software recognizes ESI charge state patterns, generates protein-specific isolation waveforms on-the-fly, and fragments ions using two different infrared laser times. In addition to protein standards, five wild-type proteins (7-14 kDa) were identified automatically with 100% sequence coverage from the M. jannaschii database. The software underpins a measurement platform for sample-dependent acquisition of MS/MS data for whole proteins, a critical step to realize proteomics with 100% sequence coverage in a higher throughput setting.     

Synthesis and characterization of a 'fluorous' (fluorinated alkyl) affinity reagent that labels primary amine groups in proteins/peptides

Strong non-covalent interactions such as biotin-avidin affinity play critical roles in protein/peptide purification. A new type of 'fluorous' (fluorinated alkyl) affinity approach has gained popularity due especially to its low level of non-specific binding to proteins/peptides. We have developed a novel water-soluble fluorous labeling reagent that is reactive (via an active sulfo-N-hydroxylsuccinimidyl ester group) to primary amine groups in proteins/peptides. After fluorous affinity purification, the bulky fluorous tag moiety and the long oligoethylene glycol (OEG) spacer of this labeling reagent can be trimmed via the cleavage of an acid labile linker. Upon collision-induced dissociation, the labeled peptide ion yields a characteristic fragment that can be retrieved from the residual portion of the fluorous affinity tag, and this fragment ion can serve as a marker to indicate that the relevant peptide has been successfully labeled. As a proof of principle, the newly synthesized fluorous labeling reagent was evaluated for peptide/protein labeling ability in phosphate-buffered saline (PBS). Results show that both the aqueous environment protein/peptide labeling and the affinity enrichment/separation process were highly efficient.     

Top-down quantitation and characterization of SILAC-labeled proteins

Stable isotope labeling by amino acids in cell culture (SILAC) has become a popular labeling strategy for peptide quantitation in proteomics experiments. If the SILAC technology could be extended to intact proteins, it would enable direct quantitation of their relative expression levels and of the degree of modification between different samples. Here we show through modeling and experiments that SILAC is suitable for intact protein quantitation and top-down characterization. When SILAC-labeling lysine and/or arginine, peaks of light and heavy SILAC-doublets do not interfere with peaks of different charge states at least between 10 and 200 kDa. Unlike chemical methods, SILAC ensures complete incorporation-all amino acids are labeled. The isotopic enrichment of commercially available SILAC amino acids of nominally 95% to 98% shifts the mass difference between light and heavy state but does not lead to appreciably broadened peaks. We expressed labeled and unlabeled Grb2, a 28 kDa signaling protein, and showed that the two forms can be quantified with an average standard deviation of 6%. We performed on-line top-down sequencing of both forms in a hybrid linear ion trap orbitrap instrument. The quantized mass offset between fragments provided information about the number of labeled residues in the fragments, thereby simplifying protein identification and characterization.     

Precursor ion scans for the targeted detection of stable‐isotope‐labeled peptides

Stable isotope labels are routinely introduced into proteomes for quantification purposes. Full labeling of cells in varying biological states, followed by sample mixing, fractionation and intensive data acquisition, is used to obtain accurate large‐scale quantification of total protein levels. However, biological processes often affect only a small group of proteins for a short time, resulting in changes that are difficult to detect against the total proteome background. An alternative approach could be the targeted analysis of the proteins synthesized in response to a given biological stimulus. Such proteins can be pulse‐labeled with a stable isotope by metabolic incorporation of ‘heavy’ amino acids. In this study we investigated the specific detection and identification of labeled proteins using acquisition methods based on Precursor Ion Scans (PIS) on a triple‐quadrupole ion trap mass spectrometer. PIS‐based methods were set to detect unique immonium ions originating from labeled peptides. Different labels and methods were tested in standard mixtures to optimize performance. We showed that, in comparison with an untargeted analysis on the same instrument, the approach allowed a several‐fold increase in the specificity of detection of labeled proteins over unlabeled ones. The technique was applied to the identification of proteins secreted by human cells into growth media containing bovine serum proteins, allowing the preferential detection of labeled cellular proteins over unlabeled bovine ones. However, compared with untargeted acquisitions on two different instruments, the PIS‐based strategy showed some limitations in sensitivity. We discuss possible perspectives of the technique. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of 14C-amino acid mixture and [35S]methionine labeling of cellular proteins from mouse fibroblast C3H10T1/2 cells by two-dimensional gel electrophoresis.

Total cellular proteins from mouse C3H10T1/2 fibroblasts were compared by two-dimensional (2-D) gel electrophoresis after radiolabeling with [35S]methionine (35S-Met) or 14C-amino acids (14C-AA). 35S-Met labeling of protein was three to four times greater than 14C-AA incorporation over a 24 h period. Automated comparative analysis of replicate fluorographs after 6, 12, and 24 h of labeling showed considerable homology between radiolabeling methods. More than 88% percent of 35S-Met and 14C-AA-labeled proteins were common at each time point. However, the total number of 35S-Met-labeled proteins dropped from 6 to 24 h while the number of 14C-AA-labeled proteins increased. Additionally, twenty-one proteins were uniquely labeled by 14C-AA that were not detectable by 35S-Met over the labeling period. Densitometric analysis showed that several 35S-Met and 14C-AA-labeled proteins exhibited time-related differences in radiolabel incorporation while most proteins remained relatively constant. Protein patterns of silver-stained gels from 6 to 24 h were highly registered and showed few qualitative differences. Proteins detected in radiolabeled gels were generally, but not always, found in silver-stained gels. Thus, 35S-Met appears better suited for short-term radiolabeling of cellular protein while more comprehensive labeling of protein occurs with 14C-AA during prolonged incubation of cell cultures under present experimental conditions.     

Use of two-dimensional liquid fractionation for separation of proteins from cell lysates without the presence of methionine oxidation

A novel two-dimensional (2D) chromatographic method is developed to separate proteins from malignant breast cancer whole cell lysates. Protein mixtures are first separated according to their pIby chromatofocusing followed by an orthogonal non-porous reversed-phase separation. An important advantage of this 2D chromatographic method is that, unlike gel-based methods, it does not result in methionine oxidation. The lack of methionine oxidation during separation is demonstrated by the analysis of protein tryptic digests using matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) MS. Our novel 2D chromatographic method used in combination with on-target light-induced methionine oxidation provides a means for studying methionine-containing peptides. Methionine residues in peptide sequences are partially oxidized with light exposure. Neither the location nor the modification of methionine in the peptide sequence affects the oxidation. As a result, multiple peaks are observed in MALDI-TOF-MS spectra after light exposure. Sequence information derived from light-induced methionine can be applied to enhance the database search results obtained through peptide mass fingerprinting.     

Inverse 15N-metabolic labeling/mass spectrometry for comparative proteomics and rapid identification of protein markers/targets

The inverse labeling/mass spectrometry strategy has been applied to protein metabolic (15)N labeling for gel-free proteomics to achieve the rapid identification of protein markers/targets. Inverse labeling involves culturing both the perturbed (by disease or by a drug treatment) and control samples each in two separate pools of normal and (15)N-enriched culture media such that four pools are produced as opposed to two in a conventional labeling approach. The inverse labeling is then achieved by combining the normal (14)N-control with the (15)N-perturbed sample, and the (15)N-control with the (14)N-perturbed sample. Both mixtures are then proteolyzed and analyzed by mass spectrometry (coupled with on-line or off-line separation). Inverse labeling overcomes difficulties associated with protein metabolic labeling with regard to isotopic peak correlation and data interpretation in the single-experiment approach (due to the non-predictable/variable mass difference). When two data sets from inverse labeling are compared, proteins of differential expression are readily recognized by a characteristic inverse labeling pattern or apparent qualitative mass shifts between the two inverse labeling analyses. MS/MS fragmentation data provide further confirmation and are subsequently used to search protein databases for protein identification. The methodology has been applied successfully to two model systems in this study. Utilizing the inverse labeling strategy, one can use any mass spectrometer of standard unit resolution, and acquire only the minimum, essential data to achieve the rapid and unambiguous identification of differentially expressed protein markers/targets. The strategy permits quick focus on the signals of differentially expressed proteins. It eliminates the detection ambiguities caused by the dynamic range of detection. Finally, inverse labeling enables the detection of covalent changes of proteins responding to a perturbation that one might fail to distinguish with a conventional labeling experiment.