液相色谱-串联质谱分析组织中基因组脱氧核糖核酸羟甲基胞嘧啶水平

5-羟甲基胞嘧啶通过阻止脱氧核糖核酸(DNA)甲基化转移酶1(DMNT1)甲基化胞嘧啶来影响DNA甲基化的程度。本文建立了液相色谱-串联质谱(LC-MS/MS)测定组织中全基因组5-羟甲基胞嘧啶水平的方法。采用苯酚-氯仿提取组织DNA,提取的DNA用88%甲酸在140 ℃下裂解,DNA裂解液加入同位素胞嘧啶作内标,经N2吹干后,加乙腈-水(9:1, v/v)溶解,用LC-MS/MS检测5-羟甲基胞嘧啶的含量,并计算全基因组中5-羟甲基胞嘧啶的水平。结果表明,5-羟甲基胞嘧啶的线性范围为0.1～30 ng/mL,相关系数为0.9969,检出限(信噪比为3计)和定量限(信噪比为10计)分别为0.057 ng/mL和0.090 ng/mL;日内相对标准偏差和日间相对标准偏差分别为5.13%和6.24%;加标回收率为90.24%～97.53%。用该方法检测了大鼠大脑组织DNA羟甲基化水平,平均结果为0.66%。该方法简便,重现性好,灵敏度较高,能满足全基因组5-羟甲基胞嘧啶定量检测的要求。     

液相色谱-串联质谱法同时测定生物组织全基因组DNA甲基化和羟甲基化水平

测定全基因组DNA甲基化和羟甲基化水平对于研究环境污染物暴露的影响及致病机理具有重要的作用。本文建立了液相色谱-串联质谱（LC-MS/MS）同时测定动物组织中全基因组DNA甲基化和羟甲基化水平的方法。从动物组织样品中提取DNA,并将其酶解成单核苷,利用液相色谱-串联质谱法测定5-甲基胞嘧啶核苷、5-羟甲基胞嘧啶核苷和鸟嘌呤核苷的含量,计算全基因组DNA甲基化率和羟甲基化率。利用该方法研究了砷暴露对大鼠肝脏和小脑全基因组DNA甲基化和羟甲基化水平的影响,得到了砷影响DNA甲基化及羟甲基化的初步数据。该方法具有良好的重现性、灵敏度和稳定性,可以同时检测差异较大的DNA甲基化和羟甲基化水平。为同时研究DNA甲基化和羟甲基化水平提供了有力的支持。     

Facile synthesis of hydroxymethylcytosine-containing oligonucleotides and their reactivity upon osmium oxidation

DNA strands containing a 5-hydroxymethylcytosine ((hm)C), which have recently been found in neuron cells and embryonic stem cells, were synthesized through a facile synthetic technique. The (hm)C-containing strands were efficiently oxidized at (hm)C using an osmium oxidation assay. The (hm)C was oxidized as easily as 5-methylcytosine, which can be distinguished from unmethylated cytosine.     

Detection of 5-methylcytosine and 5-hydroxymethylcytosine in DNA via host–guest interactions inside α-hemolysin nanopores

Cytosine methylation and hydroxymethylation are both important epigenetic modifications of DNA in mammalian cells. Therefore, profiling DNA (hydroxy)methylation across the genome is vital for understanding their roles in gene regulation. Here, we report a nanopore-based approach for quick and reliable detection of 5-methylcytosine and 5-hydroxymethylcytosine in DNA at the single-molecule level. The single-stranded DNA containing 5-methylcytosine or 5-hydroxymethylcytosine was first selectively modified on the epigenetic base to attach a host–guest complex. Threading of the modified DNA molecules through α-hemolysin nanopores causes unbinding of the host–guest complex and generates highly characteristic current signatures. Statistical analysis of the signature events affords quantitative information about 5-methylcytosine and 5-hydroxymethylcytosine in DNA. Our results suggest that other DNA modifications could also be detected with the developed method. Furthermore, we anticipate our nanopore sensing strategy to be generally useful in biochemical analysis and to find applications in the early diagnosis of diseases.     

Collisionally activated dissociation of protonated 2′-deoxycytidine, 2′-deoxyuridine, and their oxidatively damaged derivatives

We examined the collisionally activated dissociation (CAD) pathways of protonated 2'-deoxycytidine (dC), 5-formyl-2'-deoxycytidine (5-FmdC), 5-hydroxy-2'-deoxycytidine (5-OHdC), 5-hydroxymethyl-2'-deoxycytidine (5-HmdC), and their corresponding stable isotope-labeled compounds to gain insights into the effects of modifications on the fragmentation pathways of the pyrimidine bases. Multi-stage MS (MSn) results showed that protonated cytosine, its 5-hydroxyl- and 5-hydroxymethyl-substituted derivatives, but not its 5-formyl-substituted analog, could undergo Dimroth-like rearrangement in the gas-phase. The elimination of HNCO was one of the major fragmentation pathways observed for the protonated ions of all dC derivatives except for 5-hydroxymethylcytosine, which underwent this loss only after a H2O molecule had been eliminated. In addition, the protonated cytosine and 5-hydroxycytosine can undergo a facile elimination of NH3 molecule. This loss, however, was not observed for protonated 5-hydroxymethylcytosine, 5-formylcytosine, and their uracil analogs. Taken together, our study demonstrated that modifications could alter markedly the CAD patterns of the protonated pyrimidine bases. The results from this study provided a basis for the identifications of other modified pyrimidine bases/nucleosides by tandem mass spectrometry.     

Identification of epigenetic DNA modifications with a protein nanopore

Two DNA bases, 5-methylcytosine (5mC) and 5-hydroxymethylcytosine (hmC), marks of epigenetic modification, are recognized in immobilized DNA strands and distinguished from G, A, T and C by nanopore current recording. Therefore, if further aspects of nanopore sequencing can be addressed, the approach will provide a means to locate epigenetic modifications in unamplified genomic DNA.     

Determination of DNA Methylation and Hydroxymethylation Levels in Biological Samples by Field-Amplified Sample Injection-Capillary Zone Electrophoresis with UV Detection

In this study, a method of field-amplified sample injection coupled with capillary zone electrophoresis with ultraviolet detection was established for evaluation of DNA methylation and hydroxymethylation levels in biological materials. By modifying an existing method, the separation of cytosine (C), 5-methylcytosine (5-mC) and 5-hydroxymethylcytosine (5-hmC) was performed on an uncoated capillary column (40 cm × 75 μm I.D.) using 300 mmol L⁻¹ tris solution (pH 2.90) as running buffer and detected at 280 nm. The detection limits (S/N = 3) of the method were 0.004 ng mL⁻¹ for cytosine (C), 0.01 ng mL⁻¹ for 5-methylcytosine (5-mC), and 0.02 ng mL⁻¹ for 5-hydroxymethylcytosine (5-hmC). The proposed method has been successfully applied to the evaluation of DNA methylation and hydroxymethylation levels of blood samples from 15 hepatocellular carcinoma patients and 5 liver cirrhosis patients and liver tissues from 50 pairs of tumor and matched tumor-adjacent samples.

     

Discrimination between 5-hydroxymethylcytosine and 5-methylcytosine by a chemically designed peptide

An artificial phosphopeptide recognized the difference between methylated and hydroxymethylated cytosines in DNA. The Sp1 zinc finger peptide substituted by phosphotyrosine effectively discriminated between 5-methylcytosine, 5-hydroxymethylcytosine ((hm)C) and unmethylated cytosine. The DNA recognition properties of the peptide differ from those of other chemicals that detect (hm)C.     

Syntheses of 5-formyl- and 5-carboxyl-dC containing DNA oligos as potential oxidation products of 5-hydroxymethylcytosine in DNA

To investigate the potential oxidation products of 5-hydroxymethylcytosine (5-hmC)-containing DNA, we present here efficient syntheses of 5-formyl- and 5-methoxycarbonyl-2'-deoxycytidine phosphoramidites. The 5-formyl group in III was easy to introduce and was compatible with phosphoramidite and DNA syntheses. An additional treatment of ODN1 with NaBH(4) produced the corresponding ODN2 quantitatively. Phosphoramidite V was also incorporated into DNA, and the methyl ester could be hydrolyzed under mild basic conditions to afford ODN3.     

Improved synthesis and mutagenicity of oligonucleotides containing 5-hydroxymethylcytosine, 5-formylcytosine and 5-carboxylcytosine

5-Formylcytosine (fC or (5-CHO)dC) and 5-carboxylcytosine (caC or (5-COOH)dC) have recently been identified as constituents of mammalian DNA. The nucleosides are formed from 5-methylcytosine (mC or (5-Me)dC) via 5-hydroxymethylcytosine (hmC or (5-HOMe)dC) and are possible intermediates of an active DNA demethylation process. Here we show efficient syntheses of phosphoramidites which enable the synthesis of DNA strands containing these cytosine modifications based on Pd(0)-catalyzed functionalization of 5-iododeoxycytidine. The first crystal structure of fC reveals the existence of an intramolecular H-bond between the exocyclic amine and the formyl group, which controls the conformation of the formyl substituent. Using a newly designed in vitro mutagenicity assay we show that fC and caC are only marginally mutagenic, which is a prerequisite for the bases to function as epigenetic control units.     

FORMATION OF 5-HYDROXYMETHYLCYTOSINE-CONTAINING PYRIMIDINE DIMERS IN UV-IRRADIATED BACTERIOPHAGE T4 DNA

Cyclobutyl pyrimidine dimers composed of 5-hydroxymethylcytosine and thymine (5HMC>T dimer for a mutant of T4 ( denV ) that is unable to excise pyrimidine dimers from its DNA. The ability of 5HMC to form dimers suggests that other modified pyrimidines such as 5-methylcytosine can participate in dimer formation, particularly at the UV wavelengths in sunlight likely to be responsible for the induction of skin cancer.     

Nucleobase Modifiers Identify TET Enzymes as Bifunctional DNA Dioxygenases Capable of Direct N-Demethylation

TET family enzymes are known for oxidation of the 5-methyl substituent on 5-methylcytosine (5mC) in DNA. 5mC oxidation generates the stable base 5-hydroxymethylcytosine (5hmC), starting an indirect, multi-step process that ends with reversion of 5mC to unmodified cytosine. While probing the nucleobase determinants of 5mC recognition, we discovered that TET enzymes are also proficient as direct N-demethylases of cytosine bases. We find that N-demethylase activity can be readily observed on substrates lacking a 5-methyl group and, remarkably, TET enzymes can be similarly proficient in either oxidation of 5mC or demethylation of N4-methyl substituents. Our results indicate that TET enzymes can act as both direct and indirect demethylases, highlight the active-site plasticity of these Fe^II/α-ketoglutarate-dependent dioxygenases, and suggest activity on unexplored substrates that could reveal new TET biology.     

Discrimination of methylcytosine from hydroxymethylcytosine in DNA molecules

Modified DNA bases are widespread in biology. 5-Methylcytosine (mC) is a predominant epigenetic marker in higher eukaryotes involved in gene regulation, development, aging, cancer, and disease. Recently, 5-hydroxymethylcytosine (hmC) was identified in mammalian brain tissue and stem cells. However, most of the currently available assays cannot distinguish mC from hmC in DNA fragments. We investigate here the physical properties of DNA with modified cytosines, in efforts to develop a physical tool that distinguishes mC from hmC in DNA fragments. Molecular dynamics simulations reveal that polar cytosine modifications affect internal base pair dynamics, while experimental evidence suggest a correlation between the modified cytosine's polarity, DNA flexibility, and duplex stability. On the basis of these physical differences, solid-state nanopores can rapidly discriminate among DNA fragments with mC or hmC modification by sampling a few hundred molecules in the solution. Further, the relative proportion of hmC in the sample can be determined from the electronic signature of the intact DNA fragment.     

Enhanced photoactivity of CdS nanorods by MXene and ZnSnO3: Application in photoelectrochemical biosensor for the effect of environmental pollutants on DNA hydroxymethylation in wheat tissues

The photoactivity of CdS nanorods was greatly improved by amino functionalized accordion-like MXene and spherical ZnSnO₃. MXene possesses good electron transfer capability and ZnSnO₃ presents matched energy band with CdS, which deeply accelerate the electron transfer and prevent the recombination of photogenerated electron-hole pair, leading to a strong photoelectrochemical (PEC) response. Taking the merit of the improved photoactivity of CdS nanorods, a novel PEC biosensor was constructed for DNA hydromethylation detection based on immune recognition of target molecule, where 5-hydroxymethyl-2′-deoxycytidine triphosphate (5hmdCTP) was employed as detect target, CdS/MXene was used as photoactive material, and ZnSnO₃ was adopted as signal amplification unit. Under enzymatic covalent reaction of –CH₂OH of 5hmdCTP with –NH₂ of MXene, 5hmdCTP was specifically recognized and captured. Then, taking advantages of the covalent reaction between phosphate group of 5hmdCTP and ZnSnO₃, the signal amplification unit was captured. Under the optimum conditions, this PEC biosensor presents wide linear range of 0.008–100 nM and low detection limit of 4.21 pM (3σ). The applicability of the developed method was evaluated by investigating the effect of Cd²⁺ and perfluorohexane compound pollutant on 5-hydroxymethylcytosine content in the genomic DNA of the roots and leaves of wheat seedlings.     

Site-specific quantification of 5-carboxylcytosine in DNA by chemical conversion coupled with ligation-based PCR

5-Methylcytosine (5mC) is the most important epigenetic modification in mammals. The active DNA demethylation could be achieved through the ten-eleven translocation (TET) protein-mediated oxidization of 5mC with the generation of 5-hydroxymethylcytosine (5hmC), 5-formylcytosine (5fC) and 5-carboxylcytosine (5caC). It has been known that 5mC, 5hmC and 5fC play critical roles in modulating gene expression. However, unlike the 5mC, 5hmC, and 5fC, the functions of 5caC are still underexplored. Investigation of the functions of 5caC relies on the accurate quantification and localization analysis of 5caC in DNA. In the current study, we developed a method by chemical conversion in conjugation with ligation-based real-time quantitative PCR (qPCR) for the site-specific quantification of 5caC in DNA. This method depends on the selective conversion of 5caC to form dihydrouracil (DHU) by pyridine borane treatment. DHU behaves like thymine and pairs with adenine (DHU-A). Thus, the chemical conversion by pyridine borane leads to the transformation of base paring from 5caC-G to DHU-A, which is utilized to achieve the site-specific detection and quantification of 5caC in DNA. As a proof-of-concept, the developed method was successfully applied in the site-specific quantification of 5caC in synthesized DNA spiked in complex biological samples. The method is rapid, straightforward and cost-effective, and shows promising in promoting the investigation of the functional roles of 5caC in future study.     

Bisulfite-free and single-nucleotide resolution sequencing of DNA epigenetic modification of 5-hydroxymethylcytosine using engineered deaminase

The discovery of 5-hydroxymethylcytosine (5hmC) in mammalian genomes is a landmark in epigenomics study. Similar to 5-methylcytosine (5mC), 5hmC is viewed as a critical epigenetic modification. Deciphering the functions of 5hmC necessitates the location analysis of 5hmC in genomes. Here, we proposed an engineered deaminase-mediated sequencing (EDM-seq) method for the quantitative detection of 5hmC in DNA at single-nucleotide resolution. This method capitalizes on the engineered human apolipoprotein B mRNA-editing catalytic polypeptide-like 3A (A3A) protein to produce differential deamination activity toward cytosine, 5mC, and 5hmC. In EDM-seq, the engineered A3A (eA3A) protein can deaminate C and 5mC but not 5hmC. The original C and 5mC in DNA are deaminated by eA3A to form U and T, both of which are read as T during sequencing, while 5hmC is resistant to deamination by eA3A and is still read as C during sequencing. Therefore, the remaining C in the sequence manifests the original 5hmC. By EDM-seq, we achieved the quantitative detection of 5hmC in genomic DNA of lung cancer tissue. The EDM-seq method is bisulfite-free and does not require DNA glycosylation or chemical treatment, which offers a valuable tool for the straightforward and quantitative detection of 5hmC in DNA at single-nucleotide resolution.

In EDM-seq, the original C and 5mC in DNA are deaminated by eA3A to form U and T, both of which are read as T during sequencing. While the 5hmC is resistant to deamination by eA3A and is still read as C during sequencing.     

Amperometric biosensor for 5-hydroxymethylcytosine based on enzymatic catalysis and using spherical poly(acrylic acid) brushes

5-Hydroxymethylcytosine in DNA (5hmC-DNA) plays an important biological role in sculpting the epigenetic landscape. Its presence is linked to diseases, especially cancers. The authors describe an amperometric biosensor for the determination of 5hmC. It is based on a chemical modification of the hydroxy group of 5hmC in the DNA sequence. Enzymatic signal amplification is accomplished by using DNA methyltransferase (M.HhaI-DNA-cytosine-5-methyltransferase) to achieve chemical modification. A graphene-perylenetetracarboxylic acid nanocomposite was used to modify a glassy carbon electrode (GCE) that acts as a substrate electrode. A composite consisting of horseradish peroxidase on silica/poly(acrylic acid) brushes is employed as the signal amplification unit. Under the optimized conditions, there is a linear response to the logarithm of the 5hmC-DNA concentration in the range from 0.5 to 30 nM, with a 0.23 nM detection limit (at an S/N ratio of 3) in the potential range from ?0.3 V to -0.8 V at 100 mV/s. The bioassay has excellent specificity and can even discriminate the similar base 5mC.

Open image in new window

Graphical abstract An amperometric biosensor is fabricated for 5-hydroxymethylcytosine (5hmC) determination, where DNA methyltransferase was used to achieve chemical modification of 5hmC, and spherical poly(acrylic acid) brushes conjugated horseradish peroxidase was used as the signal amplification unit. The biosensor showed high sensitivity and specificity.

     

Binding of the J-Binding Protein to DNA Containing Glucosylated hmU (Base J) or 5-hmC: Evidence for a Rapid Conformational Change upon DNA Binding

Base J (β-d-glucosyl-hydroxymethyluracil) was discovered in the nuclear DNA of some pathogenic protozoa, such as trypanosomes and Leishmania, where it replaces a fraction of base T. We have found a J-Binding Protein 1 (JBP1) in these organisms, which contains a unique J-DNA binding domain (DB-JBP1) and a thymidine hydroxylase domain involved in the first step of J biosynthesis. This hydroxylase is related to the mammalian TET enzymes that hydroxylate 5-methylcytosine in DNA. We have now studied the binding of JBP1 and DB-JBP1 to oligonucleotides containing J or glucosylated 5-hydroxymethylcytosine (glu-5-hmC) using an equilibrium fluorescence polarization assay. We find that JBP1 binds glu-5-hmC-DNA with an affinity about 40-fold lower than J-DNA (～400 nM), which is still 200 times higher than the JBP1 affinity for T-DNA. The discrimination between glu-5-hmC-DNA and T-DNA by DB-JBP1 is about 2-fold less, but enough for DB-JBP1 to be useful as a tool to isolate 5-hmC-DNA. Pre-steady state kinetic data obtained in a stopped-flow device show that the initial binding of JBP1 to glucosylated DNA is very fast with a second order rate constant of 70 μM(-1) s(-1) and that JBP1 binds to J-DNA or glu-5-hmC-DNA in a two-step reaction, in contrast to DB-JBP1, which binds in a one-step reaction. As the second (slower) step in binding is concentration independent, we infer that JBP1 undergoes a conformational change upon binding to DNA. Global analysis of pre-steady state and equilibrium binding data supports such a two-step mechanism and allowed us to determine the kinetic parameters that describe it. This notion of a conformational change is supported by small-angle neutron scattering experiments, which show that the shape of JBP1 is more elongated in complex with DNA. The conformational change upon DNA binding may allow the hydroxylase domain of JBP1 to make contact with the DNA and hydroxylate T's in spatial proximity, resulting in regional introduction of base J into the DNA.