Mechanism and activity of ruthenium olefin metathesis catalysts: the role of ligands and substrates from a theoretical perspective

The reaction mechanism of olefin metathesis by ruthenium carbene catalysts is studied by gradient-corrected density functional calculations (BP86). Alternative reaction mechanisms for the reaction of the "first-generation" Grubbs-type catalyst (PCy(3))(2)Cl(2)Ru=CH(2) (1) for the reaction with ethylene are studied. The most likely dissociative mechanism with trans olefin coordination is investigated for the metathesis reaction between the "first-" and the "second-generation" Grubbs-type catalysts 1 and (H(2)IMes)(PCy(3))Cl(2)Ru=CH(2) (2) with different substrates, ethylene, ethyl vinyl ether, and norbornene, and a profound influence of the substrate is found. In contrast to the degenerate reaction with ethylene, the reactions with ethyl vinyl ether and norbornene are strongly exergonic by 8-15 kcal/mol, and this excess energy is released after passing through the metallacyclobutane structure. While the metallacyclobutane is in a deep potential minimum for degenerate metathesis reactions, the energy barrier for the [2+2] cycloreversion vanishes for the most exergonic reactions. On the free energy surface under typical experimental conditions, the rate-limiting steps for the overall reactions are then either metallacyclobutane formation for 1 or phosphane ligand dissociation for 2.     

Olefin metathesis catalyst: stabilization effect of backbone substitutions of N-heterocyclic carbene

Ruthenium olefin metathesis catalysts bearing an N-phenyl-substituted N-heterocyclic carbene (NHC) ligand that are resistant to decomposition through C-H activation have been prepared and tested in ring closing metathesis (RCM), cross metathesis (CM), and ROMP reactions. The N, N'-diphenyl-substituted NHC complex proved to be one of the most efficient catalysts in RCM to form tetrasubstituted olefins.     

Highly efficient ruthenium catalysts for the formation of tetrasubstituted olefins via ring-closing metathesis

[reaction: see text] A series of ruthenium-based metathesis catalysts with N-heterocyclic carbene (NHC) ligands have been prepared in which the N-aryl groups have been changed from mesityl to mono-ortho-substituted phenyl (e.g., tolyl). These new catalysts offer an exceptional increase in activity for the formation of tetrasubstituted olefins via ring-closing metathesis (RCM), while maintaining high levels of activity in ring-closing metathesis (RCM) reactions that generate di- and trisubstituted olefins.     

Acid-mediated activation of modified ring-closing metathesis catalysts

To improve the reactivity of Grubbs catalyst, novel ligands were designed and synthesized which possess nitrogen-containing heterocycles such as imidazole and pyridine. The modified catalysts were treated with a range of acids and the acid salt forms were used as catalysts for ring-closing metathesis (RCM) reactions. As a result, reactions employing the acid-modified catalysts showed considerable reactivity enhancement in RCM.     

关环复分解反应(RCM)及其催化剂研究进展

综述了近年来关环复分解 (RCM )反应及其催化剂的研究进展 ,对RCM反应发展以来被广泛应用的催化剂 ,如Schrock催化剂和Grubbs催化剂等进行了归纳和总结 ,讨论了RCM反应在全合成中的应用     

1,7-Octadiene-Assisted Tandem Multicomponent Cross-Enyne Metathesis (CEYM)-Diels-Alder Reactions: A Useful Alternative to Mori's Conditions

The use of 1,7-octadiene as an in situ source of ethylene led us to develop a novel multicomponent tandem cross-enyne metathesis (CEYM)-Diels-Alder reaction. The process can be considered a relay metathesis, in which the ethylene liberated in the ring-closing metathesis (RCM) of 1,7-octadiene initiates the tandem sequence. Aliphatic, aromatic, and fluorinated alkynes and several dienophiles are compatible with the process, which is particularly efficient with aromatic alkynes. This methodology constitutes a useful variant of Mori's conditions in CEYM-related reactions.     

Chelating Ruthenium Phenolate Complexes: Synthesis,General Catalytic Activity,and Applications in Olefin Metathesis Polymerization

Cyclic Ru‐phenolates were synthesized, and these compounds were used as olefin metathesis catalysts. Investigation of their catalytic activity pointed out that, after activation with chemical agents, these catalysts promote ring‐closing metathesis (RCM), enyne and cross‐metathesis (CM) reactions, including butenolysis, with good results. Importantly, these latent catalysts are soluble in neat dicyclopentadiene (DCPD) and show good applicability in ring‐opening metathesis polymeriyation (ROMP) of this monomer.     

Ring-closing metathesis as a basis for the construction of aromatic compounds

The use of metathesis, especially in the context of ring-closing metathesis (RCM) to form five- and six-membered rings, is widespread in organic chemistry today. However, there are surprisingly few examples of the reaction being used to form aromatic compounds. The central place of aromatic compounds in both medicinal chemistry and natural products synthesis, coupled with the efficiency and functional group tolerance of RCM catalysts, means that there is now an interesting opportunity to use RCM for the synthesis of arenes. Although the formation of an aromatic compound was viewed in many early examples as an undesirable degradation product, several rationally designed methods towards the preparation of aromatic compounds by RCM have recently been developed.     

Synthesis of unprotected and borane-protected cyclic phosphines using Ru- and Mo- based olefin metathesis catalysts

Ru- and Mo-based catalysts can be used in ring closing metathesis (RCM) reactions to synthesise cyclic phosphines protected as their borane complexes. The compatibility of the Schrock Mo-catalyst and the N-heterocyclic carbene Ru-catalysts with this class of substrates is particularly noteworthy as asymmetric RCM (ARCM) is now emerging as a new tool for the preparation of homochiral phosphines. One of the key results is that the Mo-catalyst allows the ring closure of the unprotected diallylphenylphosphine with 95% conversion.     

1,7‐Octadiene‐Assisted Tandem Multicomponent Cross‐Enyne Metathesis (CEYM)‐Diels–Alder Reactions: A Useful Alternative to Mori’s Conditions

The use of 1,7‐octadiene as an in situ source of ethylene led us to develop a novel multicomponent tandem cross‐enyne metathesis (CEYM)‐Diels–Alder reaction. The process can be considered a relay metathesis, in which the ethylene liberated in the ring‐closing metathesis (RCM) of 1,7‐octadiene initiates the tandem sequence. Aliphatic, aromatic, and fluorinated alkynes and several dienophiles are compatible with the process, which is particularly efficient with aromatic alkynes. This methodology constitutes a useful variant of Mori’s conditions in CEYM‐related reactions.     

Synthesis and reactivity of homogeneous and heterogeneous ruthenium-based metathesis catalysts containing electron-withdrawing ligands

The synthesis and heterogenization of new Grubbs-Hoveyda type metathesis catalysts by chlorine exchange is described. Substitution of one or two chlorine ligands with trifluoroacetate and trifluoromethanesulfonate was accomplished by reaction of [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (IMesH(2) = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with the silver salts CF(3)COOAg and CF(3)SO(3)Ag, respectively. The resulting compounds, [Ru(CF(3)SO(3))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (1), [RuCl(CF(3)SO(3))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (2), and [Ru(CF(3)CO(2))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (3) were found to be highly active catalysts for ring-closing metathesis (RCM) at elevated temperature (45 degrees C), exceeding known ruthenium-based catalysts in catalytic activity. Turn-over numbers (TONs) up to 1800 were achieved in RCM. Excellent yields were also achieved in enyne metathesis and ring-opening cross metathesis using norborn-5-ene and 7-oxanorborn-5-ene-derivatives. Even more important, 3 was found to be highly active in RCM at room temperature (20 degrees C), allowing TONs up to 1400. Heterogeneous catalysts were synthesized by immobilizing [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] on a perfluoroglutaric acid derivatized polystyrene-divinylbenzene (PS-DVB) support (silver form). The resulting supported catalyst [RuCl(polymer-CH(2)-O- CO-CF(2)-CF(2)-CF(2)-COO)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (5) showed significantly reduced activities in RCM (TONs = 380) compared with the heterogeneous analogue of 3. The immobilized catalyst, [Ru(polymer-CH(2)-O-CO-CF(2)-CF(2)-CF(2)-COO)(CF(3)CO(2))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (4) was obtained by substitution of both Cl ligands of the parent Grubbs-Hoveyda catalyst by addition of CF(3)COOAg to 5. Compound 4 can be prepared in high loadings (160 mg catalyst g(-1) PS-DVB) and possesses excellent activity in RCM with TONs up to 1100 in stirred-batch RCM experiments. Leaching of ruthenium into the reaction mixture was unprecedentedly low, resulting in a ruthenium content <70 ppb (ng g(-1)) in the final RCM-derived products.     

Olefin metathesis in room temperature ionic liquids using imidazolium-tagged ruthenium complexes

New recyclable imidazolium-tagged ruthenium catalysts have been developed to perform olefin metathesis in room temperature ionic liquids (RTILs). High level of recyclability combined with a high reactivity were obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. Extremely low residual ruthenium levels were detected in the RCM products (average of 7.3 ppm per run). Several examples of olefin cross-metathesis (CM) have been also studied.     

A new concept for the noncovalent binding of a ruthenium-based olefin metathesis catalyst to polymeric phases: preparation of a catalyst on Raschig rings

A new concept for noncovalent immobilization of a ruthenium olefin metathesis catalyst is presented. The 2-isopropoxybenzylidene ligand of a Hoveyda-Grubbs carbene is further modified by an additional amino group (7) and immobilization is achieved by treatment with sulfonated polystyrene forming the corresponding ammonium salt. In this novel strategy for the immobilization of ruthenium-based metathesis catalysts, the amino group plays a two-fold role, being first an active anchor for immobilization and second, after protonation, activating the catalysts (electron donating to electron withdrawing activity switch). The polymeric support was prepared by precipitation polymerization which led to small bead sizes (0.2-2 microm) and large surface areas. Compared to commercial resins this tailor-made phase showed superior properties in immobilization of complex 7. This concept of immobilization was applied to glass-polymer composite megaporous Raschig rings. Ru catalyst 7 on Raschig rings was used under batch conditions in various metathesis reactions, including ring-closing (RCM), cross- (CM) and enyne metathesis, to give products of high chemical purity with very low ruthenium contamination levels (21-102 ppm). The same ring can be used for up to 6 cycles of metathesis.     

The pivotal role of symmetry in the ruthenium-catalyzed ring-closing metathesis of olefins

The synthesis of Ru-based precatalysts with N-heterocyclic carbene (NHC) ligands bearing syn- and anti-methyl groups on the NHC backbone and aryl N-substituents with differing steric bulk was carried out. The catalytic behavior of the monophospine Ru precatalysts (7a, 7b, 8a, and 8b) was compared to the corresponding family of phosphine-free catalysts (9a, 9b, 10a and 10b) in the ring-closing metathesis (RCM) of olefins. These catalysts showed high efficiency in RCM reactions and the syn-isomers 7a and 9a, in particular, proved to be among the most active catalysts in the formation of tetrasubstituted olefins through RCM. DFT studies on the entire RCM catalytic cycle of hindered olefins were performed to rationalize the different behaviors of catalysts with syn- and anti-methyl groups on the NHC backbone. Theoretical results not only disclosed how NHC symmetry influences the overall activity of the catalyst, but also gave relevant and more general indications on the crucial steps of the RCM of olefins.     

Production of propylene from an unconventional metathesis of ethylene and 2-pentene over Re2O7/SiO2-Al2O3 catalysts

An unconventional metathesis of ethylene and 2-pentene over Re2O7/SiO2-Al2O3 catalysts has been studied as an alternative route for the production of propylene. Complete conversion of 2-pentene and propylene yield as high as 88 wt% were obtained under mild reaction conditions at 35°C and atmospheric pressure. Unlike the conventional metathesis of ethylene and 2-butenes in which isomerization is a competing side reaction, the isomerization of 1-butene product from the unconventional metathesis of ethylene and 2-pentene to 2-butenes can further react with excess ethylene in the feed, resulting in additional increase in propylene yield. The secondary metathesis reaction was found to be favored under ethylene/2-pentene (E/2P) molar ratio 3 and gas hourly space velocity (GHSV) 1000 h-1 at the reaction temperature of 35°C. No catalyst deactivation was observed during the 455 min time-on-stream under the selected reaction conditions.     

Synthesis of biaryl compounds using tandem ruthenium-catalyzed ring-closing metathesis

Tandem ring-closing enyne metathesis (RCEM)/ring-closing olefin metathesis (RCM) of tetraenynes with Grubbs second-generation catalyst, followed by elimination, was found to be a new and efficient synthetic approach to biaryl compounds. A preliminary asymmetric version of this approach, which used homochiral Ru-alkylidene catalysts, is also presented.     

A neutral, water-soluble olefin metathesis catalyst based on an N-heterocyclic carbene ligand

A water-soluble ruthenium-based olefin metathesis catalyst supported by a poly(ethylene glycol) conjugated N-heterocyclic carbene ligand is reported. The catalyst displays greater activity in aqueous ring-opening metathesis polymerization (ROMP) reactions than previously reported water-soluble metathesis catalysts.     

Stereoselective synthesis of macrocyclic peptides via a dual olefin metathesis and ethenolysis approach

Macrocyclic compounds occupy an important chemical space between small molecules and biologics and are prevalent in many natural products and pharmaceuticals. The growing interest in macrocycles has been fueled, in part, by the design of novel synthetic methods to these compounds. One appealing strategy is ring-closing metathesis (RCM) that seeks to construct macrocycles from acyclic diene precursors using defined transition-metal alkylidene catalysts. Despite its broad utility, RCM generally gives rise to a mixture of E- and Z-olefin isomers that can hinder efforts for the large-scale production and isolation of such complex molecules. To address this issue, we aimed to develop methods that can selectively enrich macrocycles in E- or Z-olefin isomers using an RCM/ethenolysis strategy. The utility of this methodology was demonstrated in the stereoselective formation of macrocyclic peptides, a class of compounds that have gained prominence as therapeutics in drug discovery. Herein, we report an assessment of various factors that promote catalyst-directed RCM and ethenolysis on a variety of peptide substrates by varying the olefin type, peptide sequence, and placement of the olefin in macrocycle formation. These methods allow for control over olefin geometry in peptides, facilitating their isolation and characterization. The studies outlined in this report seek to expand the scope of stereoselective olefin metathesis in general RCM.     

The activity of covalently immobilized Grubbs–Hoveyda type catalyst is highly dependent on the nature of the support material

A Hoveyda-type catalyst for olefin metathesis was synthesized and covalently attached via an amide bond to four different solid supports. One of these supports was a home-made hybrid silica support, where an ultra-thin copolymer of poly(styrene) and poly(acrylamide) was grafted on. The three other supports were commercially available, namely HypoGel 400, PEGA and Trisoperl. It was demonstrated that the catalysts were active in ring closing metathesis (RCM) reactions as well as in cross metathesis (CM) and ring opening metathesis (ROM) reactions, but the activity of the catalyst was highly dependent on the nature of the support.     

Ligand Substitution of RuII–Alkylidenes to Ru(bpy)32+: Sequential Olefin Metathesis/Photoredox Catalysis

Ruthenium(II) alkylidene complexes such as the Grubbs’ 1st and 2nd generation catalysts undergo a ligand substitution with 2,2′-bipyridine, which readily leads to the common photoredox catalyst Ru(bpy)₃²⁺. The application of this catalyst transformation in sequential olefin metathesis/photoredox catalysis is demonstrated by way of ring-closing metathesis (RCM)/photoredox ATRA reactions.