N-2-hydroxy-4-methoxyacetophenone-N'-4-nitrobenzoyl hydrazine: synthesis and structural characterization

A new aroyl hydrazone, N-2-hydroxy-4-methoxyacetophenone-N'-4-nitrobenzoyl hydrazine was prepared by the condensation reaction of 2-hydroxy-4-methoxyacetophenone and 4-nitrobenzoyl hydrazine. Characterization of the compound was done by elemental analysis and electronic, infrared and NMR spectral analyses. The complete structural assignment of the compound was done by NMR studies by using COSY homonuclear and HSQC heteronuclear techniques. The crystal and molecular structure was determined by single crystal X-ray diffraction studies: crystallized in the monoclinic system, space group P2(1)/n, Z=4, a=7.3343(9)A, b=20.3517(9)A, c=10.1375(5)A, alpha=90.00 degrees, beta=95.735(7) degrees and gamma=90.00 degrees. From the crystal structure, it is concluded that the compound exists as the keto isomer in the solid state. There is a completely extended conformation in the central part of the molecule C5C8N1N2C10O2 with an E configuration at the double bond of the hydrazinic bridge.     

Synthesis and structural characterization of double metal cyanides of iron and zinc: catalyst precursors for the copolymerization of carbon dioxide and epoxides

Several synthetic approaches for the preparation of double metal cyanide (DMC) derivatives of iron(II) and zinc(II) are described. These include (1) metathesis reactions of ZnCl(2) or ZnI(2) with KCpFe(CN)(2)CO in aqueous solution, (2) reactions of KCpFe(CN)(2)CO and its phosphine-substituted analogues with Zn(CH(3)CN)(4)(BF(4))(2) and subsequent displacement of acetonitrile at the zinc centers by the addition of a neutral (phosphine) or anionic (phenoxide) ligand, and (3) reactions of the protonated HCpFe(CN)(2)(phosphine) complexes with Zn(N(SiMe(3))(2))(2), followed by the addition of phenols. All structures are based on a diamond-shaped planar arrangement of the Fe(2)(CN)(4)Zn(2) core with various appended ligands at the metal sites. Although attempts to replace the iodide ligands in [CpFe(mu-CN)(2)PPh(3)ZnI(THF)](2) with acetate using silver acetate failed, two novel cationic mixed-metal cyanide salts based on the [CpFe(PPh(3))(mu-CN)(2)Zn(NC(5)H(5))](2)(2+) framework were isolated from pyridine solution and their structures were defined by X-ray crystallography. The anionic ligand bound to zinc in these derivatives, which serve as an anionic polymerization initiator, was shown to be central to the catalytic copolymerization reaction of CO(2)/epoxide to provide polycarbonates and cyclic carbonates. The structurally stabilized phosphine-strapped complexes [CpFe(mu-CN)(2)Zn(X)THF](2)(mu-dppp), where X = I or phenolate, were shown to be thermally stable under the conditions (80 degrees C) of the copolymerization reaction by in situ infrared spectroscopy. Both of these derivatives were proposed to serve as mimics for the heterogeneous DMC catalysts in the patent literature, with the derivative where the initiator is a phenolate being more active for the production of polycarbonates.     

Isolation and structural characterization of polymyxin B components

Polymyxin B is a peptide antibiotic complex present as sulphate. The components were separated preparatively on a poly(styrene-divinylbenzene) (PLRP-S), 1000 A, 8 microm, 250 x 12.5 mm I.D. stationary phase maintained at 60 degrees C and using 215 nm detection. Elution was carried out with acetonitrile-sodium sulphate solution (0.7%, m/v; pH adjusted to 2.5 with trifluoroacetic acid)-water (18:50:32, v/v) at a flow-rate of 4.0 ml/min. Seven polymyxin B components were isolated and characterized using 1H and 13C NMR. The molecular masses were confirmed by mass spectrometry. The structures of two components were determined for the first time. Polymyxins B5 and B6 were identified as having the same composition as polymyxin B1 except that the fatty acid moiety was nonanoic acid and 3-hydroxy-6-methyloctanoic acid, respectively.     

High resolution 1H NMR structural studies of sucrose octaacetate in supercritical carbon dioxide

High pressure (HP), high resolution (HR), proton nuclear magnetic resonance (1H NMR) spectroscopy has been utilized for the first time to investigate the solution structure of a carbohydrate based system, sucrose octaacetate (SOA), in supercritical CO2. The studies indicate that the average solution state conformation of the alpha-D-Glucopyranosyl ring of SOA in scCO2 medium is consistent with the 4C1 chair form, while the beta-D-fructofuranosyl ring adopts an envelope conformation. The investigations also suggest that scCO2 is a promising medium to study the solution structure and conformation of acetylated sugar systems. Spectral manifestations of a specific interaction between the acetate methyl protons and CO2 molecules are also presented.     

Chemical and structural characterization of carbon nanotube surfaces

To utilize carbon nanotubes (CNTs) in various commercial and scientific applications, the graphene sheets that comprise CNT surfaces are often modified to tailor properties, such as dispersion. In this article, we provide a critical review of the techniques used to explore the chemical and structural characteristics of CNTs modified by covalent surface modification strategies that involve the direct incorporation of specific elements and inorganic or organic functional groups into the graphene sidewalls. Using examples from the literature, we discuss not only the popular techniques such as TEM, XPS, IR, and Raman spectroscopy but also more specialized techniques such as chemical derivatization, Boehm titrations, EELS, NEXAFS, TPD, and TGA. The chemical or structural information provided by each technique discussed, as well as their strengths and limitations. Particular emphasis is placed on XPS and the application of chemical derivatization in conjunction with XPS to quantify functional groups on CNT surfaces in situations where spectral deconvolution of XPS lineshapes is ambiguous.      

A sulphur dioxide adduct of triphenylindium

The product from the reaction of triphenylindium with sulphur dioxide, previously considered to be O-benzenesulphinatodiphenylindium(III), is now formulated as the $\text{1}\text{1}$ adduct, Ph₃In(O₂S).     

Isolation and X-ray structural characterization of tetraisopropylpyrene cation radical

A practical synthesis of 1,3,6,8-tetraisopropylpyrene and the isolation and X-ray structural characterization of its monomeric cation radical salt are described.     

Isolation and structural characterization of a pectin homo and ramnogalacturonan

With a purpose to achieve an individual components of the pectins there was purified and separated the acidic components of the apple pectin and its chemical structure was studied using (13)C-NMR-Spectroscopy. The apple pectin was consecutively subjected to processing with hydrochloric acid and ethanol mixture, ultracentrifuging at 7000 and 40 000 rpm, ultrafiltration, fractionation on cellulose (DEAE-52) ion exchanger, eluting by the phosphate buffer. The contents of the acidic and neutral polysaccharides in an initial pectin and in the selected fractions controlled by narrow-band filter - spectroscopically in relation to E(q)=E(298)/E(315). In the (13)C-NMR-spectrums of the pectins before purifications on the ion exchanges besides the signals characteristic for homogalacturon, resonances are observed at 105.8, 79.01, 76.3, 73.9, 70.0 and 18.32 m.d., appropriate to the ramnogalacturonan residues. Resonance lines of acidic fraction in the field of 69.8, 70.6, 72.3, 80.6, 100.6 and 176.6 m.d. are referred to homogalacturonan residues and signals at 55.9, 73.3, 80.8, 101.6 and 172.6 m.d. to their methoxyl group. Minor resonance at 18.32 originated from C-6 rhamnose residues, substituted or unsubsituted with galactosyl-chains. Hence it has been shown that the apple pectin consist mainly of linear homogalacturonan and branched ramnogalacturonan macromolecules.     

Isolation and structural characterization of a low-molecular-weight pectic polysaccharide SHPPB-1 isolated from sunflower heads

A novel low-molecular-weight pectic polysaccharide was isolated from sunflower heads that are a useless side product produced from sunflower oil processing. The low-molecular-weight pectic polysaccharide was purified by using an optimized four-step procedure and named as SHPPB-1. The molecular weight of SHPPB-1 is about 1.69× 10⁴ Da. Structure characterizations of SHPPB-1 by monosaccharide composition, methylation analysis, and Fourier transform infrared (FT-IR) spectroscopy showed that SHPPB-1 is consisted of 1,4-linked α-D-GalpA and 1,4-linked 2-OAc-5-COOMe-α-D-GalpA with rare α/β-D-Rhap, α/β-D-Manp, and α/β-D-GalpA. This was combined with NMR spectroscopic analysis to propose a structure of SHPPB-1 as: →4)-[α/β-D-monosaccharide-(1→3)]-α-D-GalpA-(1→4)-2-OAc-5-COOMe-α-D-GalpA-(1→ .     

Isolation and structural characterization of triethanolaminotitanatranes: X-ray structures of partial hydrolysis condensates

A family of triethanolamine complexes of titanium with varying metal/ligand ratios have been prepared from reactions of titanium tetraisopropoxide with triethanolamine. Three nonhydrolytic products, having essentially all isopropoxide ligands substituted by triethanolamine, were prepared as hygroscopic, glassy solids. Crystals of two hexameric titanatrane partial hydrolysis analogues [Ti3(mu 2-O)((HOCH2CH2)2NCH2CH2O)(OCH2CH2)2(mu 2-OCH2CH2)N)2(OCH2CH2)(mu 2- OCH2CH2)2N)]2 (1), and [Ti3(mu 2-O)(OCH(CH3)2)((OCH2CH2)2(mu 2-OCH2CH2)N)2(OCH2CH2)(mu 2- OCH2CH2)2N)]2 (2) were isolated and structurally characterized. The structures consist of a central core of two oxo-bridged dititanatranes (TEA)TiOTi(TEA) (TEAH3 = triethanolamine) with the nonhydrolytic residue (TEA)Ti(TEAH2) included as an adduct in (1), analogously to (TEA)Ti(OPri) in (2).     

The chemistry of a ketene-sulfur dioxide adduct

We have demonstrated the formation of a reactive species from ketene and sulfur dioxide and have investigated some of its reactions. The 3 + 2 ← 5 cycloaddition reactions of this intermediate with benzylideneaniline and its derivatives gave the corresponding 2,3-diphenylthiazolidin-4-one 1,1-dioxides. The reduction of 2,3-diphenylthiazolidin-4-one 1,1-dioxide with lithium aluminum hydride yielded the corresponding thiazolidine. Aniline and its derivatives reacted with the ketene-sulfur dioxide adduct to give thioaceto-1,3-dianilide 3-oxide. o-Phenylenediamine gave [2,1,5]benzothiadiazepin-4-one 2-oxide, a derivative of a new ring system, [2,1,5]benzothiadiazepine. o-Aminophenol yielded [1,2,5]benzothiazepin-4-one 2-oxide.     

Isolation and structural characterization of an octaneselenolate-protected Au25 cluster

We report the isolation and structural characterization of an octaneselenolate-protected Au(25) cluster ([Au(25)(SeC(8)H(17))(18)](-)). Isolated [Au(25)(SeC(8)H(17))(18)](-) was characterized by various analytical techniques. The results strongly suggest that [Au(25)(SeC(8)H(17))(18)](-) possesses a similar geometric structure to the well-studied thiolate (RS)-protected Au(25) cluster ([Au(25)(SR)(18)](-)) and that the charge transfer between the metal atoms and ligands in [Au(25)(SeC(8)H(17))(18)](-) is lower than that in [Au(25)(SR)(18)](-). To the best of our knowledge, this is the first report of the isolation of a selenolate-protected gold cluster. [Au(25)(SeC(8)H(17))(18)](-) is an ideal compound for determining how changing the ligand from thiolate to selenolate affects the fundamental properties of a cluster.     

Transnitrosation of nitrosothiols: characterization of an elusive intermediate

We report an investigation of the reaction between (S)-nitroso-l-cysteine ethyl ester and l-cysteine ethyl ester as a model of physiologically relevant transnitrosation processes. Our theoretical and experimental evidence clearly supports the existence of a nitroxyl disulfide intermediate in solution.     

Electrochemical synthesis and characterization of conducting polymers in supercritical carbon dioxide

This contribution reports the first synthesis of conducting polymers (CPs), specifically, polyaniline (PAn) and polypyrrole (PPy), in supercritical carbon dioxide (scCO2). CPs synthesized electrochemically in scCO2 were characterized with cyclic voltammetry (CV), four-point probe conductivity, scanning electron microscopy (SEM), and UV-vis spectroscopy. Preliminary data indicate that CPs synthesized by this method exhibit novel morphology and high conductivity comparable to that synthesized by traditional methods.     

Synthesis and characterization of gels from polyallylamine and carbon dioxide as gellant

The synthesis and characterization of a novel series of polymer gels are reported. They are formed at ambient temperatures by bubbling CO(2) through solutions of polyallylamine (PAA; a latent gellant) in several organic liquids, including aliphatic alcohols and 1-methyl-2-pyrrolidone. The stabilities of the alcohol gels, as indicated by the (irreversible) degelation temperature, T(g)(dt), were strongly dependent on the number of carbon atoms (C(n)) in the alkyl chains of the alcohol liquids. The mechanism of formation and the microenvironmental properties of PAA-based gels containing a small amount of a pH-sensitive probe, 2,6-naphthalenedicarboxylic acid (2,6-NDCA), have been probed using static and dynamic fluorescence measurements. A measurable pH change and significant alterations to the fluorescence spectra were coincident with gelation of PAA solutions in 1-butanol as CO(2) was bubbled through, and the fluorescence spectra were monitored over several hours until no further changes were detected. Analyses of dynamic fluorescence decay histograms indicate the presence of three decay times due to different microenvironments where the 2,6-NDCA molecules are located.     

Spectroscopic and structural characterization of the CyNHC adduct of B2pin2 in solution and in the solid state

The Lewis base adduct of B(2)pin(2) and the NHC (1,3-bis(cyclohexyl)imidazol-2-ylidene), which was proposed to act as a source of nucleophilic boryl groups in the β-borylation of α,β-unsaturated ketones, has been isolated, and its solid state structure and solution behavior was studied. In solution, the binding is weak, and NMR spectroscopy reveals a rapid exchange of the NHC between the two boron centers. DFT calculations reveal that the exchange involves dissociation and reassociation of NHC rather than an intramolecular process.