A Sub‐50‐nm Monosized Superparamagnetic Fe3O4@SiO2 T2‐Weighted MRI Contrast Agent: Highly Reproducible Synthesis of Uniform Single‐Loaded Core–Shell Nanostructures

Oleic acid stabilized superparamagnetic iron oxide nanoparticles (SPION) were selected as the cores for fabrication of sub‐50‐nm monodisperse single‐loaded SPION@SiO₂ core–shell nanostructures. Parameters that influence the formation of SPION@SiO₂ in the water‐in‐oil reverse microemulsion system have been systematically investigated. The sufficiently high concentration of well‐dispersed SPION, together with an appropriately low injection rate of tetraethoxysilane, were found to be the keys to efficiently prevent the homogeneous nucleation of silica and obtain a high‐quality single‐loaded core–shell nanocomposite. A more detailed mechanism for incorporating oleic acid capped inorganic functional nanoparticles into silica is proposed on the basis of previous reports and our new experimental results. Finally, the as‐synthesized SPION@SiO₂ nanospheres are exploited as an MRI‐enhanced contrast agent, and their contrast effect in solution is tested by using a clinical MRI instrument.     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Synthesis of pH‐responsive magnetic yolk–shell nanoparticles: A comparison between conventional etching and new deswelling approaches

Iron oxide (Fe₃O₄) magnetic nanoparticles as movable cores were used to synthesize yolk–shell nanoparticles with pH‐responsive shell composed of ethylene glycol dimethacrylate (EGDMA)‐crosslinked poly(acrylic acid) (PAA) via two different routes. In the first more common route, Fe₃O₄ nanoparticles were coated with silica layer via the Stöber process to yield Fe₃O₄@SiO₂ core–shell nanoparticles, subsequently used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@SiO₂@P(AA‐EGDMA). The silica layer was selectively removed through alkali etching to yield Fe₃O₄@air@P(AA‐EGDMA). In the second route, Fe₃O₄ nanoparticles without any stabilization were used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@P(AA‐EGDMA) core–shell nanoparticles. The nanoparticles were subsequently dispersed in acidic medium of pH = 2. Yolk–shell Fe₃O₄@air@P(AA‐EGDMA) nanoparticles were formed through deswelling of crosslinked PAA because of protonation of carboxyl groups at low pH values. Various techniques were utilized to investigate the characteristics of the synthesized core–shell nanoparticles. Formation of yolk–shell nanostructure was observed for both synthesis routes, namely etching of silica layer and deswelling approaches, from vibrating sample magnetometry and transmission electron microscopy results. Both types of nanoparticles showed pH‐responsive behaviour, i.e. decrease in absorption with increase in pH, as examined using UV–visible spectroscopy.     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。     

Synthesis of Monodisperse Hollow Carbon Nanocapsules by Using Protective Silica Shells

Monodisperse hollow carbon nanocapsules (<200 nm) with mesoporous shells were synthesized by coating their outer shells with silica to prevent aggregation during their high‐temperature annealing. Monodispersed silica nanoparticles were used as starting materials and octadecyltrimethoxysilane (C18TMS) was used as a carbon source to create core–shell nanostructures. These core–shell nanoparticles were coated with silica on their outer shell to form a second shell layer. This outer silica shell prevented aggregation during calcination. The samples were characterized by TEM, SEM, dynamic light scattering (DLS), UV/Vis spectroscopy, and by using the Brunauer–Emmett–Teller (BET) method. The as‐synthesized hollow carbon nanoparticles exhibited a high surface area (1123 m² g^?1) and formed stable dispersions in water after the pegylation process. The drug‐loading and drug‐release properties of these hollow carbon nanocapsules were also investigated.     

Synthesis of Multifunctional Metal‐ and Metal Oxide Core@Mesoporous Silica Shell Structures by Using a Wet Chemical Approach

We demonstrate a facile wet chemical approach for fabricating spherical metal/metal‐oxide core@mesoporous silica shell hybrid nanoparticles with different core and shell thicknesses. Vertically aligned mesoporous silica (mSiO₂) shells were fabricated over the pre‐synthesized spherical SiO₂ nanoparticles through a three‐step strategy: 1) synthesis of core materials, 2) covering the core with an organic–inorganic composite layer, and 3) removing the organic template through calcinations in air. The mechanisms of hybrid structure formation are proposed. The multifunctional nature of the hybrid structures could be induced by incorporating guest ions/molecules, such as Ag, Mn, and TiO₂, into the pores of an mSiO₂ shell. Mn and TiO₂ cluster‐ incorporated composite structures have been tested to be antioxidizing agents and effective photocatalysts through electron spin resonance, radical scavenging tests, and the photocatalytic degradation of rhodamine B. The possibility of incorporating several hetero‐element guest clusters in these mesoporous composite particles makes them highly attractive for multifunctional applications.     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Fabrication of covalently functionalized mesoporous silica core–shell magnetite nanoparticles with palladium(II) acetylacetonate: application as a magnetically separable nanocatalyst for Suzuki cross‐coupling reaction of acyl halides with boronic acids

We report the preparation of supported palladium(II) acetylacetonate, Pd(acac)₂, coordinated by pendant acac groups, by reacting palladium acetate with acac‐functionalized doubly silica‐coated magnetic nanoparticles. The solid support consists of an amorphous silica‐coated (as magnetite protecting layer) magnetite core and a mesoporous silica shell. The magnetically separable palladium nanocatalyst is active for Suzuki cross‐coupling reaction of acyl halides with boronic acids. The catalyst is simply isolated from the reaction mixture that allows fast and efficient isolation of product and catalyst compared to traditional methods that generally make use of time‐ and solvent‐consuming procedures. Copyright © 2015 John Wiley & Sons, Ltd.     

High-temperature stable, iron-based core-shell catalysts for ammonia decomposition

High‐temperature, stable core–shell catalysts for ammonia decomposition have been synthesized. The highly active catalysts, which were found to be also excellent model systems for fundamental studies, are based on α‐Fe₂O₃ nanoparticles coated by porous silica shells. In a bottom‐up approach, hematite nanoparticles were firstly obtained from the hydrothermal reaction of ferric chlorides, L ‐lysine, and water with adjustable average sizes of 35, 47, and 75 nm. Secondly, particles of each size could be coated by a porous silica shell by means of the base‐catalyzed hydrolysis of tetraethylorthosilicate (TEOS) with cetyltetramethylammonium bromide (CTABr) as porogen. After calcination, TEM, high‐resolution scanning electron microscopy (HR‐SEM), energy‐dispersive X‐ray (EDX), XRD, and nitrogen sorption studies confirmed the successful encapsulation of hematite nanoparticles inside porous silica shells with a thickness of 20 nm, thereby leading to composites with surface areas of approximately 380 m² g^?1 and iron contents between 10.5 and 12.2 wt %. The obtained catalysts were tested in ammonia decomposition. The influence of temperature, iron oxide core size, possible diffusion limitations, and dilution effects of the reagent gas stream with noble gases were studied. The catalysts are highly stable at 750 °C with a space velocity of 120 000 cm³ g_cat^?1 h^?1 and maintained conversions of around 80 % for the testing period time of 33 h. On the basis of the excellent stability under reaction conditions up to 800 °C, the system was investigated by in situ XRD, in which body‐centered iron was determined, in addition to FeN_x, as the crystalline phase under reaction conditions above 650 °C.     

Mesoporous Bubble‐like Manganese Silicate as a Versatile Platform for Design and Synthesis of Nanostructured Catalysts

Manganese silicate in bubble‐like morphology was used as a versatile platform to prepare a new class of yolk–shell hybrids. The mesoporosity of the shell was generated from the interbubble space and the bubble structure of manganese silica was used to hold and support nanoparticles (e.g., Au, Ag, Pt, Co, Ni, Au–Pd alloy, MoO₂, Fe₃O₄, carbon nanotubes and their combinations). We also used heterogeneous catalysis reactions to demonstrate the workability of these catalysts in both liquid and gas phases.     

Comparative Structural,Optical, and Photoluminescence Studies of YF3:Pr,YF3:Pr@LaF3, and YF3:Pr@LaF3@SiO2 Core–Shell Nanocrystals

Praseodymium (Pr³⁺)‐doped YF₃ (core) and LaF₃ ‐covered YF₃ :Pr (core–shell) nanocrystals (NCs ) were prepared successfully by an ecofriendly, polyol‐based, co‐precipitation process, which were then coated with a silica shell by using a sol–gel‐based Stober method. X‐ray diffraction (XRD), transmission electron microscopy (TEM ), thermal analysis, Fourier transform infrared (FTIR) , UV /vis, energy bandgap, and photoluminescence studies were used to analyze the crystal structure, morphology, and optical properties of the nanomaterial. XRD and TEM results show that the grain size increases after sequential growth of crystalline LaF₃ and the silica shell. The silica surface modification enhances the solubility and colloidal stability of the core–shell‐SiO₂ NCs . The results indicate that the surface coating affects the optical properties because of the alteration in crystalline size of the materials. The emission intensity of silica‐modified NCs was significantly enhanced compared to that of core and core–shell NCs . These results are attributed to the formation of chemical bonds between core–shell and noncrystalline SiO₂ shell via La–O–Si bridges, which activate the “dormant” Pr³⁺ ions on the surfaces of the nanoparticles. The luminescence efficiency of the as‐prepared core, core–shell, and core–shell‐SiO₂ NCs are comparatively analyzed, and the observed differences are justified on the basis of the surface modification surrounding the luminescent seed core NCs .     

Superparamagnetic Fe3O4@SiO2 core–shell composite nanoparticles for the mixed hemimicelle solid‐phase extraction of benzodiazepines from hair and wastewater samples before high‐performance liquid chromatography analysis

Magnetic Fe₃O₄/SiO₂ composite core–shell nanoparticles were synthesized, characterized, and applied for the surfactant‐assisted solid‐phase extraction of five benzodiazepines diazepam, oxazepam, clonazepam, alprazolam, and midazolam, from human hair and wastewater samples before high‐performance liquid chromatography with diode array detection. The nanocomposite was synthesized in two steps. First, Fe₃O₄ nanoparticles were prepared by the chemical co‐precipitation method of Fe(III) and Fe(II) as reaction substrates and NH₃/H₂O as precipitant. Second, the surface of Fe₃O₄ nanoparticles was modified with shell silica by Stober method using tetraethylorthosilicate. The Fe₃O₄/SiO₂ composite were characterized by X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. To enhance their adsorptive tendency toward benzodiazepines, cetyltrimethylammonium bromide was added, which was adsorbed on the surface of the Fe₃O₄/SiO₂ nanoparticles and formed mixed hemimicelles. The main parameters affecting the efficiency of the method were thoroughly investigated. Under optimum conditions, the calibration curves were linear in the range of 0.10–15 μgmL^?1. The relative standard deviations ranged from 2.73 to 7.07%. The correlation coefficients varied from 0.9930 to 0.9996.     

A General Catalyst Based on Cobalt Core–Shell Nanoparticles for the Hydrogenation of N‐Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica‐supported Co/Co₃O₄ core–shell based nanoparticles prepared by template synthesis of cobalt‐pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2‐a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

A Sandwich‐type Electrochemiluminescence Aptasensor for Thrombin Based on Functional Co‐polymer Electrode Using Ru(bpy)32+ Doped Nanocomposites as Signal‐amplifying Tags

Herein, a signal‐on sandwich‐type electrochemiluminescence (ECL) aptasensor for the detection of thrombin (TB) was proposed. The graphene (GR) doped thionine (TH) was electropolymerized synchronously on the bare glassy carbon electrode (GCE) to form co‐polymer (PTG) electrode. The gold nanoparticles (AuNPs) were decorated on the surface of the PTG by in‐situ electrodeposition, and the functional co‐polymer (PTG‐AuNPs) electrode was utilized as sensing interface. Then, TB binding aptamer I (TBA I) as capture probes were modified on the PTG‐AuNPs electrode to capture TB, and Ru(bpy)₃²⁺/silver nanoparticles doped silica core‐shell nanocomposites‐labeled TB binding aptamer II (RuAg/SiO₂NPs@TBA II) were used as signal probes to further bind TB, resulting in a sandwich structure. With the assistant of silica shell and AgNPs, the enrichment and luminous efficiency of Ru(bpy)₃²⁺ were significantly improved. Under the synergy of PTG‐AuNPs and RuAg/SiO₂NPs, the ECL signal was dramatically increased. The proposed ECL aptasensor displayed a wide linear range from 2 fM to 2 pM with the detection limit of 1 fM, which is comparable or better than that in reported ECL aptasensors for TB using Ru(bpy)₃²⁺ and its derivatives as the luminescent substance. The excellent sensitivity makes the proposed aptasensor a promising potential in pharmaceutical and clinical analysis.     

Synthesis and investigation of barium titanate nanoparticles covered with silica shell

Matrix isolation of ferroelectric BaTiO₃ nanoparticles was executed by formation of protective silica shell (via hydrolysis and polycondensation of tetraethyl orthosilicate) on particles of precursor—barium titanyl oxalate. Synthesized BaTiO₃–SiO₂ composites have been characterized by IR spectroscopy, XRD, TEM, DTA/DTG methods.     

In Situ Confined Growth Based on a Self‐Templating Reduction Strategy of Highly Dispersed Ni Nanoparticles in Hierarchical Yolk–Shell Fe@SiO2 Structures as Efficient Catalysts

Ni‐based magnetic catalysts exhibit moderate activity, low cost, and magnetic reusability in hydrogenation reactions. However, Ni nanoparticles anchored on magnetic supports commonly suffer from undesirable agglomeration during catalytic reactions due to the relatively weak affinity of the magnetic support for the Ni nanoparticles. A hierarchical yolk–shell Fe@SiO₂/Ni catalyst, with an inner movable Fe core and an ultrathin SiO₂/Ni shell composed of nanosheets, was synthesized in a self‐templating reduction strategy with a hierarchical yolk–shell Fe₃O₄@nickel silicate nanocomposite as the precursor. The spatial confinement of highly dispersed Ni nanoparticles with a mean size of 4 nm within ultrathin SiO₂ nanosheets with a thickness of 2.6 nm not only prevented their agglomeration during catalytic transformations but also exposed the abundant active Ni sites to reactants. Moreover, the large inner cavities and interlayer spaces between the assembled ultrathin SiO₂/Ni nanosheets provided suitable mesoporous channels for diffusion of the reactants towards the active sites. As expected, the Fe@SiO₂/Ni catalyst displayed high activity, high stability, and magnetic recoverability for the reduction of nitroaromatic compounds. In particular, the Ni‐based catalyst in the conversion of 4‐nitroamine maintained a rate of over 98 % and preserved the initial yolk–shell structure without any obvious aggregation of Ni nanoparticles after ten catalytic cycles, which confirmed the high structural stability of the Ni‐based catalyst.     

Molecularly imprinted polymer functionalized magnetic Fe3O4 for the highly selective extraction of triclosan

We present a facile strategy to prepare the molecularly imprinted polymers layer on the surface of Fe₃O₄ nanoparticles with core‐shell structure via sol–gel condensation for recognition and enrichment of triclosan. The Fe₃O₄ nanoparticles were first synthesized by a solvothermal method. Then, template triclosan was self‐assembled with the functional monomer 3‐aminopropyltriethoxysilane on the silica‐coated Fe₃O₄ nanoparticles in the presence of ethanol and water. Finally, the molecularly imprinted polymers were formed on the surface of silica‐coated Fe₃O₄ nanoparticles to obtain the product. The morphology, magnetic susceptibility, adsorption, and recognition property of magnetic molecularly imprinted polymers were characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffractometry, vibrating sample magnetometry, and re‐binding experiments. The magnetic molecularly imprinted polymers showed binding sites with good accessibility, fast adsorption rate, and high adsorption capacity (218.34 μg/g) to triclosan. The selectivity of magnetic molecularly imprinted polymers was evaluated by the rebinding capability of triclosan and two other structural analogues (phenol and p‐chlorophenol) in a mixed solution and good selectivity with an imprinting factor of 2.46 was obtained. The application of triclosan removal in environmental samples was demonstrated.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Synthesis,characterization and application of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles

In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe₃O₄@SiO₂@SO₃H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), coating of silica on Fe₃O₄ MNPs (Fe₃O₄@SiO₂) and incorporation of sulfonic acid as a functional group on the surface of Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂@SO₃H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd.