Intrinsic viscosities of sodium carboxymethylcellose in acetonitrile–water mixed solvent media using isoionic dilution method

Precise measurements on the viscosities of the solutions of sodium carboxymethylcellulose in water and in two acetonitrile–water mixtures containing 10 and 20 vol % of acetonitrile have been reported at 35, 40 and 50 °C. Isoionic dilutions were performed with the total ionic strengths of the solutions maintained with sodium chloride at ～4.20 × 10^?4 and 1.45 × 10^?3 mol dm^?3 of NaCl to obtain the intrinsic viscosities. The Huggins constants were also obtained from the experimental results. The influences of the medium, the temperature, and the total ionic strength on the intrinsic viscosities as well as on the Huggins constants have been interpreted from the points of view of the solvodynamic and thermodynamic interactions prevailing in the polyelectrolyte solution under investigation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1765–1770, 2007     

Viscosity of sodium carboxymethylcellulose in ethylene glycol–water mixed solvent media: Separation of the influences of polyion conformation and electrostatic interactions on the reduced viscosity

Precise measurements on the viscosities of the solutions of sodium carboxymethylcellulose in water and three ethylene glycol–water mixtures containing 10, 20, and 30 mass % of ethylene glycol have been reported at 35 °C. Isoionic dilutions were performed at total ionic strengths in the range of 0.0002–0.0008 eqv L^?1 using sodium chloride to obtain the intrinsic viscosities along with the Huggins constants. The influence of the medium and the ionic strength on the intrinsic viscosities have been interpreted from the points of view of the counterion condensation and expansion/contraction of the polyion chains in solution. The variations of Huggins constants, on the other hand, provided information on the intermolecular interactions in these solutions. A convenient method has been proposed to decompose the reduced viscosity of a polyelectrolyte solution into its conformational and electrostatic components. The electrostatic reduced viscosities obtained in the present study, purely from experimental considerations, quantitatively corroborates the conclusions derived from the Huggins constants. Using the Hess and Klein theoretical approach, an expression for the reduced viscosity due to the electrostatic interactions as a function of polyelectrolyte concentration could be obtained and the reported experimental electrostatic contributions could be nicely described with the help of this approach. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1196–1202, 2010     

Kinetics of degradation of Lycium barbarum polysaccharide by ultrasonication

Lycium barbarum polysaccharide (LBP) was subjected to ultrasonic degradation under the controlled conditions, such as, temperature, irradiation time, initial pH value, and concentration of solution. The ultrasonic degradation of LBP was demonstrated by the changes of intrinsic viscosity. Viscometry was used to study the degradation behavior and a kinetic model was developed to estimate the degradation rate. The results showed that the degradation rate was reduced with the increase of solution concentration and pH, and increased with increase of temperature. The relationship between the number average molar mass (M_n) and intrinsic viscosities as interpreted using the Mark‐Houwink equation suggested that LBP adopted a flexible coil conformation in aqueous solution. The activation energy of ultrasonic degradation of LBP is 26.5 kJ/mol, which indicates that the ultrasonic degradation is a convenient, time saving, and cost‐efficient method for obtaining a desired molecular weight. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 509–513, 2010     

Water‐soluble acrylamide copolymers. IX. Preparation and characterization of the cationic derivatives of poly(acrylamide‐co‐n,n‐dimethylacrylamide), poly(acrylamide‐co‐methacrylamide), and poly(acrylamide‐co‐n‐t‐butylacrylamide)

This article extends the preparative details of a series of nonionic copolymers of acrylamide with N,N‐dimethylacrylamide, methacrylamide, and N‐t‐butylacrylamide to the synthesis of cationic derivatives of these new copolymers. The described procedures gave products with cationicities of 14–26 mol %. We measured the mean squared radii of gyration and intrinsic viscosities of aqueous solutions of these products at several different pHs and NaCl concentrations to compare these values with those determined for the nonionic precursors and related commercial cationic polymers. Because the molecular weights of the examples measured varied widely, it was difficult to establish definite trends. However, the large values obtained for the mean squared radii of gyration and intrinsic viscosities, relative to the nonionic precursors of these polymers, demonstrated that the charged groups had a qualitatively greater effect on polymer extension than the nonpolar bulky groups. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2525–2535, 2001     

Revisit to the intrinsic viscosity-molecular weight relationship of ionic polymers. 7. Examination of the Pals-Hermans dilution method with reference to the viscosity behavior of dilute aqueous dispersion of ionic polymer latex

The isoionic dilution method, which was proposed by Pals and Hermans, for linear ionic polymer solutions, was examined for the viscosity behavior of dilute aqueous dispersion of ionic latex [particle diameter, (0.120 ± 0.003) × 10^–6 m; surface charge density, 1.6 × 10^–6 C/cm²] in the presence of sodium chloride (5 × 10^–5 to 5 × 10^–4 M). Linear relations were obtained between the reduced viscosity and the latex concentration, when a parameter m, which appeared in the effective ionic strength introduced by Pals and Hermans, was chosen to be about 0.1. This finding on the latex system does not support that, at the salt and polymer concentrations employed, the dimension of linear macroions varies with changing effective ionic strength and it is kept constant along the isoionic dilution line. Brief discussion on the m value is presented. ©1995 John Wiley & Sons, Inc.     

A kinetic study of the formation of polystyrene stars using 1,2-bis(trichlorosilyl)ethane

The kinetics of formation of a chlorosilane-linked polystyrene six-arm star is reported. The precursor arm material (M_n = 88,000) was made using anionic polymerization in benzene. Prior to addition to the 1,2-bis(trichlorosilyl) ethane linking agent, the anions were endcapped with about five units of isoprene. Size exclusion chromatography using multiangle laser light scattering and viscosity detectors was utilized for characterization. This technique has allowed the molecular weights, radii of gyration, and intrinsic viscosities to be measured for star components in aliquots taken from the reactor at various times. It was found that four-arm star is formed within 30 min after the addition of the chlorosilane linking agent. There is a linear relationship between the logarithm of molecular weight of the star samples and logarithm of time of the reaction after the formation of the four-arm star. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 587–594, 1997     

Excluded‐volume effects on the chain dimensions and transport coefficients of sodium poly(styrene sulfonate) in aqueous sodium chloride

Fifteen samples of sodium poly(styrene sulfonate) with weight‐average molecular weights of 3 × 10⁴ to 8 × 10⁵ have been studied by static and dynamic light scattering and viscometry in 0.05 and 0.5 M aqueous NaCl at 25 °C. The measured radii of gyration, translational diffusion coefficients, and intrinsic viscosities at the lower salt concentration exhibit molecular weight dependencies stronger than those predictable for uncharged flexible chains in the good solvent limit. These data and those at the higher NaCl concentration are analyzed, along with previous intrinsic viscosity data covering a broad molecular weight range, in the framework of the quasi‐two‐parameter (QTP) theory with the wormlike chain as the model. It is shown that the relevant theories for the expansion factors in the QTP scheme combined with these theories for the unperturbed wormlike chain are capable of describing the experimental data with a degree of accuracy similar to that known for nonionic flexible polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2728–2735, 2002     

Molecular surfaces: An advantageous starting point for the description of composition‐dependent viscosities applied to polymer solutions

The viscosity of polymer/solvent systems is modeled as a function of composition under the premises that the dissipation of energy is taking place at the molecular interfaces and that the friction between solvent and solute varies with composition due to a change in the flow mechanism (drainage of coils). The simple expression obtained in this manner contains three system‐specific parameters: a geometric factor γ, which accounts for the differences of the surface to volume ratios of the components; a hydrodynamic parameter α, which measures the friction between solute and solvent in the case of fully draining polymer coils; and β, which corrects for changes in the friction between unlike molecules resulting from collective motions owing to limited draining. Experimental data published for 12 poly(dimethylsiloxane)/pentamer mixtures can be represented quantitatively by this relation; moreover the knowledge of the three system‐specific parameters permits the calculation of intrinsic viscosities, and the molecular weight dependencies of γ and α yield the entangle molecular weight of the polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2221–2228, 1999     

Synthesis of poly(arylene thioether)s from protected dithiols and aromatic difluorides with an organic base

Aromatic poly(arylene thioether)s were synthesized from N‐propyl‐S‐carbamate‐protected aromatic dithiols and aromatic difluorides. The deprotection of the protected dithiols with an organic base such as 1,8‐diazabicyclo[5.4.0]‐7‐undecene at room temperature and subsequent polymerization with the difluoride monomers at 120 °C in N‐methyl‐2‐pyrrolidinone produced high molecular weight polymers with intrinsic viscosities as high as 0.45 dL/g. The use of organic bases instead of inorganic bases for the generation of thiophenoxide nucleophile was a convenient way of avoiding metallic impurities in the synthesis of the poly(arylene thioether)s through a nucleophilic aromatic substitution reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2021–2027, 2005     

Main kinetic features of ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts in the light of a multicenter reaction mechanism

A previously developed kinetic scheme for ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts (see Y. V. Kissin, R. I. Mink, & T. E. Nowlin, J Polym Sci Part A: Polym Chem 1999, 37, 4255 and Y. V. Kissin, R. I. Mink, T. E. Nowlin, & A. J. Brandolini, J Polym Sci Part A: Polym Chem 1999, 37, 4273, 4281) states that the catalysts have several types of active centers that have different activities and different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. Each type of center produces a single polymer component (Flory component), a material with a uniform structure (copolymer composition, isotacticity, etc.) and a narrow molecular weight distribution (weight-average molecular weight/number-average molecular weight = 2.0). This article examines several previously known features of ethylene polymerization and copolymerization reactions on the basis of this mechanism. The discussed subjects include temperature and cocatalyst effects on the polymerization kinetics and molecular weight distribution of polymers and reaction parameter effects (temperature, ethylene and hydrogen partial pressures, and α-olefin and cocatalyst concentrations) on the molecular weights of Flory components. The results show that the formulation of the multicenter kinetic scheme and the development of kinetic tools necessary for the application of this scheme significantly expand our understanding of the working of heterogeneous polymerization catalysts and provide additional means for their control. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1681–1695, 2001     

Predicting the location of weld line in microinjection‐molded polyethylene via molecular orientation distribution

The microstructure and molecular orientation distribution over both the length and the thickness of microinjection‐molded linear low‐density polyethylene with a weld line were characterized as a function of processing parameters using small‐angle X‐ray scattering and wide‐angle X‐ray diffraction techniques. The weld line was introduced via recombination of two separated melt streams with an angle of 180° to each other in injection molding. The lamellar structure was found to be related to the mold temperature strongly but the injection velocity and the melt temperature slightly. Furthermore, the distributions of molecular orientation at different molding conditions and different positions in the cross section of molded samples were derived from Hermans equation. The degree of orientation of polymeric chains and the thickness of oriented layers decrease considerably with an increase of both mold temperature and melt temperature, which could be explained by the stress relaxation of sheared chains and the reduced melt viscosity, respectively. The level of molecular orientation was found to be lowest in the weld line when varying injection velocity, mold temperature, and melt temperature, thus providing an effective means to identify the position of weld line induced by flow obstacles during injection‐molding process. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1705–1715     

Anomalous viscosity behavior of rodlike polyelectrolytes: Partially sulfonated poly(2-benzoyl-1,4-phenylene)s in aqueous solution

Two stereoisomeric poly(2-benzoyl-1,4-phenylene)s were synthesized. Polymer I has exclusively a head-to-tail structure; however, polymer II contains both head-to-head and head-to-tail units. The sulfonation reaction of polymers I and II was found to occur mainly on the meta position of the benzoyl group on the phenylene backbone. The viscosities of polymers Ia (27% sulfonated) and Ic (51% sulfonated) in aqueous solutions at 25°C were measured with and without NaBr addition. Upon the addition of NaBr (0.05 and 0.1M), the reduced viscosities were found to increase gradually and reach a constant value in each case after standing at room temperature for 30–40 h. Without NaBr, the time effect was not found. The reduced viscosities of solutions with NaBr were also higher than those without the salt. These results are quite different from the typical “polyelectrolyte” behavior. A possible explanation of the salt effect of rigid rodlike polymers such as sulfonated poly(2-benzoyl-1,4-phenylene) is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1425–1429, 1998     

Synthesis and characterization of a novel mid‐chain macrophotoinitiator of polyacrylonitrile by Ce(IV)/HNO3 redox system

The polymerization of acrylonitrile initiated by cerium(IV) ammonium nitrate in combination with dihydroxy functional photoinitiator namely, 2‐hydroxy‐1‐[4‐(2‐hydroxyethoxy)phenyl]‐2‐methyl propan‐1‐one (HE‐HMPP), Irgacure 2959, has been investigated in aqueous nitric acid. A novel mid‐chain macrophotoinitiator of polyacrylonitrile (PAN) was obtained. The effects of acrylamide (AAm), HE‐HMPP, Ce(IV), and HNO₃ concentrations and temperature on the polymerization rate, monomer conversion, and intrinsic viscosities were investigated. The photodegradation and IR, H NMR, UV, and fluorescence spectroscopic studies revealed that PAN with desired photoinitiator functionality in the middle of the chain was obtained. The obtained PAN was used as prepolymer for photoinduced free radical polymerization of methyl methacrylate (MMA) and AAm to produce block copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5404–5413, 2008     

Synthesis and characterization of new polyamides based on Diphenylaminoisosorbide

New aromatic polyamides were synthesized by the microwave‐assisted polycondensation of an optically active isosorbide‐derived diamine with different diacyl chlorides in the presence of a small amount of N‐methylpyrrolidinone. Polymers with inherent viscosities between 0.22 and 0.73 dL/g were obtained corresponding to molecular weights up to 140,000 g/mol. With interfacial polymerization or the Higashi method, lower molecular weight polymers were obtained with inherent viscosities in the range of 0.04–0.36 dL/g. Differential scanning calorimetry measurements clearly demonstrated the high thermal stability of these polymers (mp = 180–300 °C) and the absence of decomposition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6480–6491, 2005     

Polystyrene/decahydronaphthalene/propane phase equilibria and polymer conformation properties from intrinsic viscosities

The influence of dissolved propane (up to 31.2 wt %) on the phase equilibria of 5 wt % polystyrene (PS) dissolved in 66/34 wt % trans/cis‐decahydronaphthalene (DHN) was measured over the temperature range of 323–423 K. A suitable temperature, pressure, and propane composition operating space was defined to measure intrinsic viscosities of a single fluid phase. Intrinsic viscosities of PS in cosolvent mixtures of propane and trans/cis‐DHN were measured between 323 and 423 K and between 70 and 208 bar. The addition of propane to the isomeric mixture of DHN resulted in a decreased solvent quality for PS, causing a contraction of the PS coil. The most dramatic decrease in solvent quality with the addition of propane occurred at 323 K and 70 bar with approximately a 36% reduction in the viscometric radius with the addition of 45 mol % propane to DHN. At 423 K, the solvent quality was less sensitive to the addition of propane and only a 13% reduction in the viscometric radius was observed at 70 bar and 45 mol % propane in DHN. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

A facile cesium fluoride-mediated synthesis of aromatic polyethers from bisphenols and activated aromatic dihalides

A facile method for the synthesis of high-molecular-weight aromatic polyethers was developed with the use of cesium fluoride as a base. The high-temperature solution polycondensation between bisphenols and activated aromatic dihalides with cesium fluoride in polar aprotic solvents readily afforded a series of aromatic polyethers having inherent viscosities of 0.5–1.0 dL/g under essentially neutral and milder reaction conditions, compared with the conventinal method using alkali hydroxides or alkali carbonates. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2055–2061, 1997     

Water‐soluble acrylamide copolymers. VII. Preparation and characterization of poly(methacrylamide‐co‐acrylamide)

This article carries the objectives of our current acrylamide copolymer project further by examining the synthesis, characterization, and testing of a series of poly(methacrylamide‐co‐acrylamide)s and some homopolymer control products. These are characterized by traditional Fourier transform photoacoustic infrared, ¹³C NMR, and elemental analysis. A composite picture of the hydrodynamic volumes of the high molecular weight products was then obtained by a series of viscometric, gel permeation chromatographic, and multiangle laser light scattering methods. These give a good quantitative picture of the effect of the introduction of the backbone methyl group on the hydrodynamic volumes of the copolymer products. Yields were generally greater than 60%. The copolymer products generally had lower molecular weights than those obtained from the control polyacrylamide preparations. Copolymer samples with comparable molecular weights did have larger radii of gyration and intrinsic viscosities than samples of control polyacrylamides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3146–3160, 2000     

Morphology and bridging properties of (AB)n multiblock copolymers

Motivated by recent experiments (Spontak, R. J.; Smith, S. D. J Polym Sci Part B: Polym Phys 2001, 39, 947) on morphological and mechanical properties of multiblock copolymers (AB)_n, we theoretically elucidate the links between microscopically determined properties, such as the bridging fraction of chains, and mechanical properties of these materials. We do this by applying self‐consistent mean‐field theory to determine morphological aspects such as period and interfacial width and calculate the bridging fractions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 104–111, 2003     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001