葡萄糖氧化酶在石墨烯-纳米氧化锌修饰玻碳电极上的直接电化学及对葡萄糖的生物传感

采用滴涂法和电沉积法制备了石墨烯/纳米氧化锌复合膜修饰玻碳电极,再将葡萄糖氧化酶固定在修饰电极表面制成了电化学生物传感器,用于葡萄糖的灵敏测定。用循环伏安法在-0.7～-0.1 V范围内研究了葡萄糖氧化酶在修饰电极上的直接电化学行为。结果表明,石墨烯/纳米氧化锌复合膜能很好地保持葡萄糖氧化酶的生物活性,并显著促进了其电化学过程。在0.1 mol/L磷酸盐缓冲溶液(pH 7.0)中,固定在修饰电极上的葡萄糖氧化酶呈现出一对近乎可逆的氧化还原峰,并且对葡萄糖的氧化具有良好的催化作用。葡萄糖氧化酶在修饰电极上的电子转移常数ks为1.42 s-1,修饰电极对葡萄糖催化的米氏常数Kampp为14.2μmol/L。线性范围为2.5×10-6～1.5×10-3mol/L,检出限为2.4×10-7mol/L(S/N=3)。此修饰电极具有良好的导电性能、稳定性和重现性,可用于实际样品的分析测定。     

固载于壳聚糖-纳米金复合膜修饰玻碳电极上的葡萄糖氧化酶的直接电化学研究及其生物传感应用

通过将葡萄糖氧化酶固载于壳聚糖-纳米金复合膜内所构置的传感器,实现了葡萄糖氧化酶的直接电化学,并采用循环伏安法与电化学阻抗法对修饰电极进行了表征。研究表明：在除氧缓冲溶液中,葡萄糖氧化酶-壳聚糖-纳米金复合膜修饰电极表现出一对良好的氧化还原峰,这对峰归因于葡萄糖氧化酶的氧化还原,证明葡萄糖氧化酶被成功固载于复合膜内。电子传递速率常数为15.6 s-1,说明葡萄糖氧化酶的电活性中心与电极之间的电子传递很快。将壳聚糖与纳米金相结合还提高了葡萄糖氧化酶在复合膜内的稳定性并保持其生物活性,并可以用于葡萄糖检测。计算得到其表观米氏常数为10.1 mmol·L-1。而且,该生物传感器可以用于血样中葡萄糖含量的测定。     

血红蛋白在纳米羟基磷灰石修饰的热解石墨电极上的直接电化学

采用超声辅助沉淀法合成羟基磷灰石纳米晶体,制作了以纳米羟基磷灰石(HAp)修饰的热解石墨电极(EPG)。并研究了血红蛋白在该修饰电极上的直接电化学行为。在pH6.9的磷酸盐(PBS)缓冲溶液中,得到一对可逆的血红蛋白辅基血红素Fe(Ⅲ)/Fe(Ⅱ)电对的循环伏安氧化还原特征峰,式量电位E0p′=-0.356V(vs.SCE,pH6.9),几乎不随扫速的改变而变化,电子转移数为1.041,近似一个辅基发生一个电子转移。Hb在HAp/EPG电极表面直接电子转移的速率常数为0.6074。在该纳米HAp微环境中,Hb与EPG电极之间的电子传递得到极大促进,并显示了较好的稳定性。式量电势pH3.6~9.0范围内与溶液的pH成线性关系,直线斜率为-56.0mV/pH,说明Hb的电子传递过程伴随质子的转移。探讨了Hb-HAp修饰电极对H2O2的电催经性质,为制作生物传感器打下基础。     

葡萄糖氧化酶在炭黑上的固定及直接电化学

经红外光谱和电化学测量证明, 用简单的吸附法能将葡萄糖氧化酶(GOx)固定在炭黑(CB)表面. 电化学测量表明, 固定在CB上的GOx能进行准可逆的直接电化学反应, 其式量电位(E0’)为-0.436 V, 在40-150 mV·s-1范围内, 不随扫描速率而变化. 电化学反应速率常数(ks)为0.800 s-1, 比文献报道的大30多倍. 而且, 固定在CB上的GOx能保持其对葡萄糖氧化的生物电催化活性. 即使在保存两周后, 其电催化活性仅下降了5%, 表明固定在CB上的GOx有良好的稳定性.     

基于WS2量子点材料固定葡萄糖氧化酶的直接电化学及其生物传感研究

采用水热法制备水溶性WS₂量子点（WS₂ QDs）材料,并将该材料进一步用于葡萄糖氧化酶（GOx）的有效固定,构建GOx/W₂ QDs/GCE传感界面. 采用透射电镜、紫外-可见光谱和电化学等方法对材料的形貌、GOx的固定化过程,以及传感器的直接电化学和电催化性能进行了表征. 结果表明,WS₂ QDs材料能够有效促进GOx与电极之间的直接电子转移. 并且,基于该传感器对葡萄糖良好的电催化作用,该方法有效实现了对葡萄糖的高灵敏检测,其线性范围为25 ~ 100 μmol·L^-1和100 ~ 600 μmol·L^-1,检测限为5.0 μmol·L^-1（S/N=3）. 该传感器具有良好的选择性、重现性和稳定性,可用于实际样品血糖的分析测定.     

介孔碳修饰玻碳电极上葡萄糖氧化酶的直接电化学

使用简单的方法将葡萄糖氧化酶(GOD)固定在介孔碳(Mesoporous Carbon)修饰的玻碳电极(GCE)表面.循环伏安测试表明:修饰电极上的GOD在0.1mol/L磷酸缓冲溶液(PBS)(pH=7.1)中发生了准可逆的氧化还原反应,其克式量电位为-0.4294 V,并且该电化学反应包含有两电子两质子的传递.在氮气饱和的情况下,以羧基二茂铁作为电子传递中介体,GOD能将葡萄糖彻底催化氧化,可见介孔碳修饰电极上的GOD保持了其生物学活性.     

葡萄糖氧化酶在活性炭上的固定及直接电化学

The glucose oxidase (GOD) immobilized onto the surface of activated carbon powders at the glassy carbon electrode (GOD-C/GC) could undergo the quasi-reversible, direct electrochemical reaction. Its formal redox potential, E^0′, is almost independent on the scan rates. The average value of E^0′ is (-0.467 ± 0.002) V (vs SCE) in the pH 6.8 phosphate buffer solution. Its apparent heterogeneous electron transfer rate constant (k_s) is (1.18 ± 0.59) s^-1, which is much higher than that reported previously. The dependence of E^0′ on the pH of the buffer solution indicated that the direct electrochemical reaction of the immobilized GOD is a two-electron transfer reaction process coupled with two-proton transfer. The further experimental results demonstrated that the immobilized GOD retained its bioelectrocatalytic activity to the oxidation of β-D(+) glucose.     

细胞色素c在羟基磷灰石修饰玻碳电极上的直接电化学

采用沉淀法合成羟基磷灰石纳米晶体，由于具有独特的多吸附位点特征，羟基磷灰石可作为一种新型电子传递促进剂用于细胞色素c的直接电化学研究．在pH7．0的磷酸盐缓冲溶液中，细胞色素c在羟基磷灰石修饰玻碳电极表面于0．074V(vs．Ag/AgC1)处有一对准可逆的氧化还原峰，为细胞色素c血红素辅基Fe(Ⅲ)／Fe(Ⅱ)电对的特征峰．实验结果表明细胞色素c与羟基磷灰石之间的静电作用．促进了细胞色素c在玻碳电极表面扩散控制的准可逆单电子转移过程．讨论了电位扫描速度、溶液离子强度对细胞色素c直接电化学的影响．     

碳纳米管修饰电极上葡萄糖氧化酶的直接电子转移

制备了碳纳米管修饰玻碳电极(CNT/GC), 利用吸附的方法将葡萄糖氧化酶(GOx)固定到CNT/GC电极表面, 形成GOx-CNT/GC电极．研究了GOx的直接电子转移, 实验结果表明, GOx在CNT/GC电极表面没有发生变性, 能进行有效和稳定的直接电子转移反应, 其循环伏安图上表现出一对很好的、几乎对称的氧化还原峰; 式量电位E^0’几乎不随扫速(至少在10~140 mV·s^−1的扫速范围内)而变化, 其平均值为−0.456±0.0008 V (vs. SCE); GOx在CNT/GC电极表面直接电子转移的速率常数为1.74±0.42 s^−1, 比文献中报道的值大了数十倍; 进一步的实验结果显示, 固定在CNT/GC电极表面的GOx能保持其对葡萄糖氧化的生物电催化活性, 而且电催化活性很稳定. 文中制备碳纳米管修饰电极和固定酶的方法具有简单和易于操作等优点, 可用于获得其他生物氧化还原蛋白质和酶的直接电子转移.     

葡萄糖氧化酶在水溶性CdTe量子点上的直接电化学研究

利用合成的Cd Te量子点(QDs)作修饰材料,将葡萄糖氧化酶(GOD)固定在水溶性Cd Te量子点表面,制备了葡萄糖氧化酶Cd Te量子点修饰碳糊电极(GOD/Cd Te/CPE),实现了GOD在电极表面的直接电化学。Cd Te QDs能有效地加速葡萄糖氧化酶(GOD)与电极表面的直接电子转移,电子传递效率比无QDs Cd Te存在时提高约8倍;电子转移速率常数(K)为0.14 s-1,传递系数(α)为0.60,GOD在GOD/Cd Te/CPE表面的平均覆盖量(Γ)为7.9×10-8mol/cm2。GOD/Cd Te/CPE电极作为第三代葡萄糖电化学生物传感器,成功应用于葡萄糖浓度的检测,其线性范围为0.050~0.32 mmol/L,检出限为0.020 mmol/L。GOD/Cd Te/CPE的制备方法简单,稳定性强,具有优良的选择性和重现性,且响应速度快。     

Direct electrochemistry of glucose oxidase on the hydroxyapatite/Nafion composite film modified electrode and its application for glucose biosensing

A novel glucose biosensor was constructed by immobilizing the glucose oxidase (GOD) on a hydroxyapatite (HAp)/Nafion composite film modified glassy carbon electrode (GCE) and applied to the highly selective and sensitive determination of glucose. With the cooperation of HAp and Nafion, the composite film played an important role in enhancing the stability and sensitivity of the biosensor. The results demonstrate that the GOD adsorbed onto the HAp/Nafion composite film exhibits a pair of well-defined nearly reversible redox peaks and fine catalysis to the oxidation of glucose companied with the consumption of dissolved oxygen. On the basis of the decrease of the reduction current of dissolved oxygen at the applied potential of −0.80 V (vs. SCE) upon the addition of glucose, the concentration of glucose could be detected sensitively and selectively. The decreased reduction current was linear with the concentration of glucose in the range of 0.12–2.16 mM. The detection limit and sensitivity were 0.02 mM (S/N = 3) and 6.75 mA·M⁻¹, respectively. All the results demonstrate that HAp/Nafion composite film provides a novel and efficient platform for the immobilization of enzymes and realizes the direct electrochemistry. The composite materials should have potential applications in the fabrication of third-generation biosensors.     

Direct electron transfer of glucose oxidase on the carbon nanotube electrode

The direct electrochemistry of redox enzymes (or proteins) has received more and more attention[1—9]. These studies developed an electrochemical basis for the investigation of enzyme structure, mechanisms of redox transformations of enzyme molecules and metabolic processes involving redox transformations. From these studies, one can also find potential appli-cations of enzymes in biotechnology. For example, if an enzyme immobilized on electrode surface is ca-pable of the direct electron tra…     

Direct electrochemistry of glucose oxidase entrapped in nano gold particles-ionic liquid-N,N-dimethylformamide composite film on glassy carbon electrode and glucose sensing

The direct electrochemistry of glucose oxidase (GOD) entrapped in nano gold particles (NAs)-N,N-dimethylformamide (DMF)-1-butyl-3-methylimidazolium hexafluophosphate (BMIMPF₆) composite film on a glassy carbon electrode (NAs-DMF-GOD (BMIMPF₆)/GC) has been investigated for first time. The immobilized GOD exhibits a pair of well-defined reversible peaks in 0.050 M pH 5 phosphate solutions (PS), resulting from the redox of flavin adenine dinucleotide (FAD) in GOD. The peak currents are three times as large as those of GOD-NAs-DMF film coated GC electrode (i.e. NAs-DMF-GOD (water)/GC). In addition, the NAs-DMF-GOD (BMIMPF₆) composite material has higher thermal stability than NAs-DMF-GOD (water). Results show that ionic liquid BMIMPF₆, DMF and NAs are requisite for GOD to exhibit a pair of stable and reversible peaks. Without any of them, the peaks of GOD become small and unstable. Upon the addition of glucose, the peak currents of GOD decrease and a new cathodic peak occurs at −0.8 V (versus SCE), which corresponds to the reduction of hydrogen peroxide (H₂O₂) generated by the catalytic oxidation of glucose. The peak current of the new cathodic peak and the glucose concentration show a linear relationship in the ranges of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁶ M and 2.0 × 10⁻⁶ to 2.0 × 10⁻⁵ M. The kinetic parameter I_max of H₂O₂ is estimated to be 1.19 × 10⁻⁶ A and the apparent K_m (Michaelis-Menten constant) for the enzymatic reaction is 3.49 μM. This method has been successfully applied to the determination of glucose in human plasma and beer samples, and the average recoveries are 97.2% and 99%, respectively.     

Direct electrochemistry of glucose oxidase based on its direct immobilization on carbon ionic liquid electrode and glucose sensing

Direct electrochemistry of glucose oxidase (GOx) has been achieved by its direct immobilization on carbon ionic liquid electrode (CILE) with a conductive hydrophobic ionic liquid, 1-butyl pyridinium hexafluophosphate ([BuPy][PF₆]) as binder for the first time. A pair of reversible peaks is exhibited on GOx/CILE by cyclic voltammetry. The peak-to-peak potential separation (ΔE_P) of immobilized GOx is 0.056 V in 0.067 M phosphate buffer solution (pH 6.98) with scan rate of 0.1 V/s. The average surface coverage and the apparent Michaelis–Menten constant are 6.69 × 10⁻¹¹ mol·cm⁻² and 2.47 μM. GOx/CILE shows excellent electrocatalytic activity towards glucose determination in the range of 0.1–800 μM with detection limit of 0.03 μM (S/N = 3). The biosensor has been successfully applied to the determination of glucose in human plasma with the average recoveries between 95.0% and 102.5% for three times determination. The direct electrochemistry of GOx on CILE is achieved without the help of any supporting film or any electron mediator. GOx/CILE is inexpensive, stable, repeatable and easy to be fabricated.     

Direct electrochemistry of glucose oxidase in a colloid Au-dihexadecylphosphate composite film and its application to develop a glucose biosensor

Colloid Au (Au(nano)) with a diameter of about 10 nm was prepared and used in combination with dihexadecylphosphate (DHP) to immobilize glucose oxidase (GOD) onto the surface of a graphite electrode (GE). The direct electrochemistry of GOD confined in the composite film was investigated. The immobilized GOD displayed a pair of redox peaks with a formal potential of -0.475 mV in pH 7.0 O(2)-free phosphate buffers at scan rate of 150 mV s(-1). The GOD in the composite film retained its bioactivity and could catalyze the reduction of dissolved oxygen. Upon the addition of glucose, the reduction peak current of dissolved oxygen decreased, which could be developed for glucose determination. A calibration linear range of glucose was 0.5-9.3 mM with a detection limit of 0.1 mM and a sensitivity of 1.14 microA mM(-1). The glucose biosensor showed good reproducibility and stability. The general interferences that coexisted in human serum sample such as ascorbic acid and uric acid did not affect glucose determination.     

The usage of a bismuth film electrode as transducer in glucose biosensing

A second generation glucose biosensor was developed by using neutral red (NR) as a mediator and a bismuth film electrode (BiFE) as a transducer along with immobilized glucose oxidase. The linear range was between 0.2 and 2.5 mM, and a correlation coefficient of 0.999 was obtained with this electrode. The standard deviation (at 1 mM glucose for n = 4) and the coefficient of variation were calculated as ±8.07 μM and 3.4%, respectively. The biosensor was used for the determination of glucose in wine samples. Correspondence: ülkü Anık, Chemistry Department, Faculty of Arts and Science, Mugla University, TR-48000-K?tekli, Mugla, Turkey     

Direct electrochemistry of glucose oxidase immobilized on NdPO4 nanoparticles/chitosan composite film on glassy carbon electrodes and its biosensing application

The direct electrochemistry of glucose oxidase (GOx) immobilized on a composite matrix based on chitosan (CHIT) and NdPO(4) nanoparticles (NPs) underlying on glassy carbon electrode (GCE) was achieved. The cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrode. In deaerated buffer solutions, the cyclic voltammetry of the composite films of GOx/NdPO(4) NPs/CHIT showed a pair of well-behaved redox peaks that are assigned to the redox reaction of GOx, confirming the effective immobilization of GOx on the composite film. The electron transfer rate constant was estimated to be 5.0 s(-1). The linear dynamic range for the detection of glucose was 0.15-10 mM with a correlation coefficient of 0.999 and the detection limit was estimated at about 0.08 mM (S/N=3). The calculated apparent Michaelis-Menten constant was 2.5 mM, which suggested a high affinity of the enzyme-substrate. The immobilized GOx in the NdPO(4) NPs/CHIT composite film retained its bioactivity. Furthermore, the method presented here can be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Direct electrochemistry of glucose oxidase immobilized on porous carbon nanofiber/room temperature ionic liquid/chitosan composite film and its biosensing application

The direct electron transfer of glucose oxidase (GOD) immobilized on a composite matrix based on porous carbon nanofibers (PCNFs), room-temperature ionic liquid (RTIL), and chitosan (CHIT) underlying on a glassy carbon electrode was achieved. The combination of the PCNFs, RTIL, and CHIT provided a suitable microenvironment for GOD to transfer electron directly. In deaerated buffer solutions (pH 7.0), the cyclic voltammetry of the GOD/PCNFs/RTIL/CHIT composite films showed a pair of well-defined redox peaks with the formal potential of −0.45 V (vs. SCE). The synergistic effort of the PCNFs, RTIL, and CHIT also promoted the stability of GOD in the composite film and retained its bioactivity.     

Direct electrochemistry of glucose oxidase on sulfonated graphene/gold nanoparticle hybrid and its application to glucose biosensing

Sulfonated graphene nanosheet/gold nanoparticle (SGN/Au) hybrid was synthesized by electrostatic self-assembly of anionic SGN and positively charged gold nanoparticles. Due to the well-dispersivity of SGN in aqueous solution and its adequate negative charge, Au nanoparticles were assembled uniformly on graphene surface with high distribution. With the advantages of both graphene and Au nanoparticles, SGN/Au hybrid showed enhanced electrocatalytic activity towards O₂ reduction. Furthermore, it provided a conductive and favorable microenvironment for the glucose oxidase (GOD) immobilization and thus promoted its direct electron transfer at the glassy carbon electrode. Based on the consumption of O₂ caused by glucose at the interface of GOD electrode modified with SGN/Au hybrid, the modified electrode displayed satisfactory analytical performance, including high sensitivity (14.55 μA mM^?1 cm^?2), low detection limit (0.2 mM), an acceptable linear range from 2 to 16 mM, and also the prevention from the interference of some species. These results indicated that the prepared SGN/Au hybrid is a promising candidate material for high-performance glucose biosensor.