Investigation on Adsorption Dynamics of Protein/Tween‐20 Mixture at the Surface of Solution by Surface Pressure Measurement

The dynamic surface tension (γ_t) and apparent diffusion coefficient (D) of nonionic surfactant Tween‐20 in the presence and absence of bovine serum albumin (BSA) have been investigated via the measurements of surface pressure (π) at different time (t). The curves of γ_t～t are obtained from π～t isotherms. Results show that the γ_t～t relationships of Tween‐20 solution with or without BSA accord with the Ward‐Tordai equation in the region of initial adsorption. D value obtained from the γ_t～t^1/2 curves shows that the diffusion of Tween‐20 slows down with the increase of the concentration of Tween‐20 (c _Tween‐20). And D value of Tween‐20 in the presence of BSA is almost the same as that of the system without BSA when c _Tween‐20 is constant, suggesting that the interaction between Tween‐20 and BSA is weak.     

Effect of surfactant agents and lipids on optical resolution of amino acid by ultrafiltration membranes containing bovine serum albumin

Ultrafiltration experiments for the optical resolution of racemic phenylalanine were performed in a solution system containing bovine serum albumin (BSA) and surfactant agents (Triton X-100, Tween 20, sodium dodecyl sulfate), lipid (phosphaticylcholine) and fatty acid (palmitic acid sodium salt). It was found that -phenylalanine preferentially existed in the permeate at pH 7.0 due to the binding of BSA to -phenylalanine in the feed and that the separation factors (=concentration ratio of -isomer to -isomer in the permeate) increased with a decrease in the BSA solution containing no additives and in the BSA solution containing Triton X-100 or Tween 20. The unusual tendency that the separation factors were less than unity was observed and the separation factors decreased with a decrease in the feed concentration of phenylalanine during the ultrafiltration containing the palmitic acid sodium salt or the phosphatidylcholine. This is caused by the fact that the binding constants of -phenylalanine to BSA are higher than those of -phenylalanine in the BSA solution containing the palmitic acid sodium salt or phosphatidylcholine. Since there were found conformational changes of BSA in the presence of palmitic acid sodium salt based on circular dichroism measurements of BSA solution, the conformational changes of BSA were attributed to the higher affinity of -phenylalanine to BSA than that of -phenylalanine in the BSA solution containing the palmitic acid sodium salt or phosphatidylcholine.     

Spectroscopic Study on the Interaction between Bovine Serum Albumin and Tween‐20

The interaction between nonionic surfactant Tween-20 and bovine serum albumin (BSA) is studied in Tris‐HCl buffer solution by spectroscopic methods. The intrinsic fluorescence of BSA is quenched by the addition of Tween‐20. The UV‐visible absorption spectra and the synchronous fluorescence spectra show that the addition of Tween‐20 changes the polarity of the environment around tryptophan (trp) residues of BSA. The fraction of trp residues on the surface of BSA with and without Tween- 20 is calculated via I^? quenching experiments.     

Adsorption Behavior of Lysozyme and Tween 80 at Hydrophilic and Hydrophobic Silica–Water Interfaces

Nonionic surfactants such as Tween 80 are used commercially to minimize protein loss through adsorption and aggregation and preserve native structure and activity. However, the specific mechanisms underlying Tween action in this context are not well understood. Here, we describe the interaction of the well-characterized, globular protein lysozyme with Tween 80 at solid–water interfaces. Hydrophilic and silanized, hydrophobic silica surfaces were used as substrates for protein and surfactant adsorption, which was monitored in situ, with ellipsometry. The method of lysozyme and Tween introduction to the surfaces was varied in order to identify the separate roles of protein, surfactant, and the protein–surfactant complex in the observed interfacial behavior. At the hydrophobic surface, the presence of Tween in the protein solution resulted in a reduction in amount of protein adsorbed, while lysozyme adsorption at the hydrophilic surface was entirely unaffected by the presence of Tween. In addition, while a Tween pre-coat prevented lysozyme adsorption on the hydrophobic surface, such a pre-coat was completely ineffective in reducing adsorption on the hydrophilic surface. These observations were attributed to surface-dependent differences in Tween binding strength and emphasize the importance of the direct interaction between surfactant and solid surface relative to surfactant–protein association in solution in the modulation of protein adsorption by Tween 80.     

Polychlorinated Biphenyls-contaminated Soil Washing with Mixed Surfactants Enhanced by Electrokinetics

On the basis of comparing the adsorption loss of different surfactants[single nonionic surfactant sorbitanmonooleatepolyoxyethylene ether(Tween 80), anionic surfactant sodium dodecyl benzene sulfonate(SDBS), and mixed surfactants Tween 80/SDBS(3:2), Tween 80/SDBS(4:1)] and their performance in the enhancement of polychlorinated biphenyls(PCBs) desorption from soil, the impact of electric field intensity on the desorption of PCBs and the transport of surfactants in washing resulted solution were investigated in this study. With regard to the remediation cost, 1000 mg/L mixed Tween 80/SDBS(3:2) was recognized as an optimum concentration in the remediation of PCBs-contaminated soil, because Tween 80/SDBS(3:2) had the highest washing capacity and relatively low adsorption loss onto soil. Electrokinetics can enhance the washing efficiency of PCBs-contaminated soil by Tween 80/SDBS(3:2) effectively and safely at an electric field intensity of 1.5 V/cm for 10 d, for the desorption of PCBs was 1.57 times more than that without electrokinetics, and the most of organic residue in washing resulted solution was removed in an electrical field to avoid the possible secondary contamination risk.     

Friction and adsorption of aqueous polyoxyethylene (Tween) surfactants at hydrophobic surfaces

The nanotribological responses of a series of nonionic polyoxyethylene surfactants (Tween 20, Tween 40, Tween 60, and Tween 80) were investigated after they were adsorbed from aqueous solution onto atomically smooth hydrophobic substrates. The hydrophobic surfaces were composed of a condensed monolayer of octadecyltriethoxysilane (OTE; contact angle theta>110 degrees ). The nanorheological measurements were performed using a modified surface forces apparatus after coating atomically smooth mica with these OTE monolayers, while adsorption measurements were performed using phase-modulated ellipsometry on silicon wafers coated with these same monolayers. The minimum surface-surface separation observed under high load in friction studies agreed quantitatively with the thickness obtained from ellipsometry. For Tweens 20, 40, and 60, the thickness of the adsorbed film increases with increasing alkyl chain length. Systematic investigations of the nanorheological response showed that there is a "solid-like" elastic response from confined surfactant layers, which is the case for the smallest separations to separations up to slightly larger than twice the adsorbed film thickness. In kinetic friction, these confined layers are characterized by a shear stress of approximately 3 MPa with minimal dependence on shear rate. The magnitude of the sliding shear stress is the same as the apparent yield stress at approximately 3 MPa; it is independent of alkyl chain length within the Tween family of surfactants and corresponds to a nominal friction coefficient of mu approximately 1. A similar friction coefficient is observed for boundary lubrication on the macroscopic scale in a tribometer utilizing hydrophobic surfaces and mu approximately 1.1 for Tweens 20, 40, and 60. These results suggest that while Tween molecules adsorb onto hydrophobic surfaces to form a robust separating layer, the lubricating properties of these layers are dominated by a highly dissipative slip plane, the same for all alkyl chain lengths.     

Phase behavior, self-assembly, and emulsification of tween 80/water mixtures with limonene and perfluoromethyldecalin

The phase behavior, microstructure, and emulsification of polyoxyethylene (20) sorbitan monooleate (Tween 80), water, and d-limonene (LM) or perfluoromethyldecalin (PFMD) has been studied by small-angle X-ray scattering and polarizing optical microscopy. In the Tween 80/water binary system, a micellar solution (L(1)), a hexagonal (H(1)) phase, and a water-swellable isotropic surfactant liquid (L(2)) phase are successively formed at 25 °C. LM can be solubilized into all of the phases formed by Tween 80/water mixtures, whereas no solubilization of PFMD occurs. The L(2) phase was found by small-angle neutron scattering to be bicontinuous with low interfacial curvature. Added water swells and amplifies the pre-existing amphiphilic structure. The stability of oil-in-H(1) complex emulsions is found to be sensitive to changes in structure that accompany solubilization.     

Viability and permeability across Caco-2 cells of CBZ solubilized in fully dilutable microemulsions

The purpose of this study was to evaluate the viability and permeability of carbamazepine (CBZ) solubilized in fully dilutable non-ionic microemulsions across Caco-2 cells used as a model for intestinal epithelium. Maximum solubilization capacity (SC) of CBZ was determined within water-in-oil (W/O), bicontinuous and oil-in-water (O/W) structures formed upon dilution. The effect of the nature of the oil phase, surfactant type, and the ratio between the oil phase and surfactant on the quantity of solubilized CBZ, droplets size, the viability of the cells and drug permeability was elucidated. We found that: (1) several fully dilutable microemulsions based on pharma-grade ingredients can be loaded with very significant amounts of CBZ, (2) W/O microemulsions (10wt% water) exhibit up to 3-fold higher solubilization capacity over the drug's solubility in oil (triacetin), (3) CBZ in the O/W microemulsions (80wt% water) exhibit up to 29-fold higher solubilization than in water, (4) the O/W droplets of the examined systems are 9-11nm in size, (5) the highest permeability was obtained in systems containing triacetin/alpha-tocopherol acetate/ethanol in 3/1/4wt% ratio as oil phase and Tween 60 as surfactant, (6) the replacement of alpha-tocopherol acetate by alpha-tocopherol inhibits CBZ release, (7) replacement of a saturated chain of Tween 60 by an unsaturated (Tween 80) or shorter chain (Tween 40) inhibited drug release, (8) the decrease in the oil phase to surfactant ratio leads to enhancement of drug release (dilution line 64>dilution line 73).     

Selected non-ionic biological detergents enhance signal intensity of intact bovine serum albumin by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Recently, we showed that the signal intensity of intact protein by matrix-assisted laser desorption/ionisation (MALDI) mass spectro-metry measurement can be enhanced at least an order of magnitude by the addition of Tween80 to the analyte solution. We did not ascertain whether this effect was limited to Tween80 or if it was more universal of biological detergents. This paper discusses our investigations into this question. A variety of chemically diverse detergents were added to analyte solutions containing bovine serum albumin (BSA) to determine whether there was significant signal enhancement. The addition of Tween20, Tween80, Triton X100 and Triton X-114 improved the attainable sensitivity of intact protein MALDI mass spectrometry compared to spectra acquired without detergent. In some cases there was considerable improvement in signal--for example, with Triton X-100 two charge states (the +1 and +2) of BSA (3.9 fmol) could easily be observed. Another advantage of this process is that the detergent can be added directly to the matrix solution reducing sample handling and preparation time. We propose this phenomenon results from the ability of these detergents to increase the solubility of the protein via hydrophobic and hydrophilic interactions between the detergent and protein. The increased solubility allows for more uniform deposition of the analyte/-matrix mixtures producing an evenly distributed layer of analyte especially useful for data acquisition using an automated laser firing sequence.     

Potential Enzyme Cost Reduction with the Addition of Surfactant during the Hydrolysis of Pretreated Softwood

The potential economic benefits of surfactants addition on enzymatic hydrolysis of steam-exploded lodgepole pine (SELP) and ethanol-pretreated lodgepole pine (EPLP) were investigated in this study. Free cellulase readsorption on fresh substrate was used to recover and recycle cellulase enzymes during the hydrolysis of SELP and EPLP substrate. Supplementing Tween 80 during the hydrolysis could facilitate enzyme recycling for EPLP substrate. A logarithmic correlation was established between surfactant concentration and free cellulase content after lignocellulosic hydrolysis, which was used to compute enzyme cost savings over various Tween 80 concentrations. A simple economic analysis of enzyme cost savings versus the cost of surfactant was undertaken. The results indicated that the addition of Tween 80 (priced at US $0.25/kg) during the hydrolysis of the EPLP substrate could save 60% of the total enzyme cost at concentrations in the 0.025% to 0.2% range. The addition of Tween for the hydrolysis of the SELP substrate significantly reduced the material cost by 24% per 1 gal of ethanol produced, and the ethanol production cost could be reduced by 8.6% with the addition of Tween and enzymes recycle for the hydrolysis of SELP substrate. A schematic concept of recycling enzyme and surfactant was also presented with a recirculation of process streams during hydrolysis. Further analysis indicated a 66% reduction in total enzyme cost could potentially be achieved under the concept.     

The Synergistic Effect of a Mixed Surfactant (Tween 80 and SDBS) on Wettability Alteration of the Oil Wet Quartz Surface

The synergistic effect of a new combination of Tween 80 and sodium dodecylbenzenesulfonate (SDBS) surfactants has been studied for wettability alteration of a reservoir rock. The contact angle decreased substantially for the aqueous solution of the mixed surfactant on a crude oil aged quartz substrate when compared to water and individual surfactants viz. SDBS and Tween 80. This established synergism between anionic and non-ionic surfactants. The optimal salinity for reduction of the contact angle has been figured out. The rheological effect of the mixed surfactant solution on the wettability alteration has been investigated. Adsorption of crude components at the solid–fluid interfaces has been observed to visualize the activity at the micro scale. Quantification of adsorption for the mixed surfactant on sand has been studied to meet the economical aspect. Reaction aspects of the mixed surfactant–quartz–crude oil system have been interpreted from FTIR. Functional groups present in the system have also been enquired.     

Spectroscopic studies of interaction of Safranine T with nonionic micelles and mixed micelles

The visible spectra of Safranine T (ST) in micellar solution of Brij 58, Tween 20 and Tween 40 and mixed micellar solution of Brij 58/Tween 20 and Brij 58/Tween 40 indicate formation of 1:1 charge transfer (CT) complex between acceptor ST and donor nonionic micelles and mixed micelles. The experimental CT transition energies are well correlated (through Mulliken's equation) with the vertical ionization potential of the donors. The solvent parameters, i.e. the intramolecular charge transfer energy ET(30) have been determined from the Stokes spectral shift. Variations of ionization potential and micropolarity in the mixed micellar region have been investigated as a function of surfactant composition and the obtained results in mixed micellar medium has been compared to the normal micelles. The critical micelle concentration (CMC) values determined at various surfactant compositions are lower than the ideal values indicating a synergistic interaction. The interaction parameter (beta) and micellar stability has been calculated using regular solution theory.     

Silica supported phospholipid layers doped with GM1: A comparison between different methods

A method to coat hydrophobic surfaces with lipid molecules in a reproducible manner and in which the lipid molecules are resistant to detergent washings, would benefit the development of new ELISA assays. This work presents different approaches to build 1,2-dioleolyl-sn-glycero-3-phosphocholine (DOPC) layers doped with a monosialoganglioside (GM1) supported on silica surfaces, which are stable toward buffer rinsing and washing with surfactant (Tween 20). The three methods employed were: method 1, coadsorption of DOPC:GM1 (0-10 mol%) with the surfactant n-dodecyl-beta-D-maltoside (DDM) from micellar solutions, with successive adsorption and rinsing steps; method 2, vesicle fusion from DOPC: GM1 (0-10 mol%) liposomes; and method 3, deposition of GM1 from organic solvent (chloroform) and exposure to an aqueous environment (hydration method). The vesicle fusion method was also tested in polystyrene surfaces. Cholera toxin subunit B (CTB) was used to detect the presence of GM1 on the formed layers. The results indicated that the vesicle fusion was the only method that was successful in creating stable mono- and bilayers onto hydrophobized and hydrophilic silica, respectively. The mixed micellar solution method was suitable for creating pure lipid (DOPC) monolayers but the incorporation of GM1 in the micelles led to monolayers which were very unstable with respect to buffer rinsing. The hydration method led to monolayers of GM1 that were partly rinsed off by a continuous buffer flow. Adsorption of CTB was found to be proportional to the amount of GM1 present in the liposomes. The amount of CTB adsorbed onto the lipid bilayers was roughly the double as the one determined on the monolayers with the same liposome compositions. The vesicle fusion method was also able to create monolayers of pure DOPC and DOPC:10 mol% GM1 on the polystyrene surfaces.     

Effects of non-ionic surfactants on isotachophoretic separations of 2-arylpropionic acids

Non-ionic surfactant (Brij 35, Tween 20, Tween 80 and Tergitol NPX) modified capillary isotachophoresis was investigated for the separation of 2-arylpropionic acids (fenoprofen, flurbiprofen, ibuprofen, ketoprofen and naproxen) and benzoic acid and its derivatives (salicylic, acetylsalicylic and gallic acids). The relative step height (RSH) values of analytes were found to be dependent on the type and concentration of the surfactant. The strength of the affinity of the 2-arylpropionic acids to the non-ionic micelles was found to be as follows: flurbiprofen > fenoprofen > ibuprofen > naproxen > ketoprofen. In general, the RSH values of 2-arylpropionic acids increase with an increase in the concentration of surfactants. However, the RSHs of benzoic, salicylic and gallic acids are not considerably affected. Separation of all acids was obtained with the Tween 20 (1.5%, w/v) in the leading electrolyte 10 mmol L(-1) hydrochloric acid/L-histidine (pH 6.0). Changes in the fluorescence intensity of fenoprofen, flurbiprofen and naproxen were also investigated in micellar media (Tween 20, Tween 80 and Brij 35). The strength of the affinity of the 2-arylpropionic acids to the Tweens micelles was found to be as follows: flurbiprofen > fenoprofen > naproxen, which is consistent with the isotachophoretic results. On the contrary, the strength of the affinity to the Brij micelles was found to be as follows: fenoprofen > naproxen > flurbiprofen.     

The enhanced diffusional mixing for latex immunoagglutination assay in a microfluidic device

Latex immunoagglutination assay in a microfluidic device is expected to be even easier than its large-sized, commercialized counterpart. However, such demonstration has had a limited success due to the difficulties in mixing in a microfluidic device, especially for the microparticles used in latex immunoagglutination assay. The primary goal of this work is to improve diffusional mixing towards the successful latex immunoagglutination in a microfluidic devices without any non-specific binding. To this end, SDS (sodium dodecyl sulfate, an ionic surfactant) or Tween 80 (polyethylene sorbitol ester, a non-ionic surfactant) was added to the antibody-conjugated polystyrene (PS) microparticle suspension. These surfactant-added particle suspensions were mixed with the target antigen solution at the Y-junction of a microfluidic device. The immunoagglutination and the diffusion behavior were visually identified with an inverted light microscope. Both surfactants showed some problems such as non-specific binding (with SDS) or very poor diffusion (with Tween 80). As an alternative approach, therefore, highly carboxylated PS microparticles, where the surface is saturated with carboxyl-terminated side chains, were evaluated without using any surfactants. These particles showed very low non-specific binding comparable to that with Tween 80 and good diffusional mixing equivalent to that with SDS.     

Interaction of bovine serum albumin with nonionic surfactant Tween 80 in aqueous solutions: Complexation and association

It is shown by the methods of precision tensiometry, quasi-elastic light scattering, and UV, IR, and fluorescent spectroscopies that the properties of binary aqueous solutions with a constant concentration of bovine serum albumin and different concentrations of the nonionic surfactant Tween 80 (1 × 10^–7−6 × 10⁻² M) are determined mainly by the complexation and formation of a new phase. The complexation occurs owing to specific interactions (hydrogen bonding) between polar groups of Tween 80 and protein molecules. The solubility in water and surface activity of a 1: 1 Tween 80-protein complex are determined. At the concentrations above the break point on surface tension isotherms (conditionally corresponding to critical association concentration), the particles are formed with radii varying from 16 to 350 nm. At a molar nonionic surfactant/protein ratio in the range of 6–10, the additional binding of Tween 80 molecules by the particles of the new phase due to hydrophobic interactions is observed. Original Russian Text ? N.M. Zadymova, G.P. Yampol’skaya, L.Yu. Filatova, 2006, published in Kolloidnyi Zhurnal, 2006, Vol. 68, No. 2, pp. 187–197.     

Synthesis and Characterization of Ferrierite-Type Zeolite in the Presence of Nonionic Surfactants

Pure-phase ferrierite (FER) zeolite has been synthesized in the presence of small amounts of nonionic surfactants, Tween 20 and Tween 80. The input SiO(2)/Al(2)O(3) molar ratio has been varied over a range of 25 to 150. The results confirm that a small amount of pyrrolidine acts as a template and is necessary. The effects of varying concentration of surfactant on ferrierite crystallization and output SiO(2)/Al(2)O(3) molar ratio are reported. The results also show that in the absence of pyrrolidine, ZSM-5 cocrystallized with FER, whereas in the absence of a nonionic surfactant the yield and crystallization of FER are very poor. The XRF analysis shows the changes in SiO(2)/Al(2)O(3) output molar ratios as the surfactant concentration changes. The XRD data show that the samples are fully crystalline and pure. The TG/DTA of the sample shows its structural stability. The scanning electron microscopy results show changes in particle size with varying concentration of nonionic surfactant. Copyright 2001 Academic Press.     

Dilational Rheological Properties of Non-Ionic Surfactants at the Water–Decane Interface: Effect of Unsaturated Hydrophobic Group

The interfacial tensions and dilational properties of adsorbed films of two non-ionic surfactants with different hydrophobic groups, polyoxy-ethylene sorbitan stearate (Tween 60) and polyoxy-ethylene sorbitan monooleate (Tween 80), at the water–decane interface have been investigated by the drop-shape analysis method. The effects of dilational frequency and bulk concentration on the interfacial properties were expounded. The influence of low temperature on the interfacial tensions and dilational properties have also been researched. The experiment results show that the interfacial activity of Tween 80 is rather large compared with Tween 60. The minimum area per molecule at the water–decane interface (A_min) value of Tween 80 is little large than that of Tween 60, which is due to the steric effect of unsaturated double bond in Tween 80 molecule. The dilational data show that the ethylene oxide groups of non-ionic surfactant form a stable sub-layer, which results in the increase of modulus and the decrease of phase angle for both Tween 60 and Tween 80 than those of common ionic surfactants. Moreover, the unsaturated hydrophobic group of Tween 80 is much flexible, which is easily crosslinked and entangled. Therefore, dilational modulus of Tween 80 is higher and phase angle is lower than that of Tween 60. Low temperature decreases the flexibility of unsaturated hydrophobic group and lessens the influence on the interaction of saturated hydrophobic group. Saturated surfactant molecules of Tween 60 almost lose temperature response.     

Single-crystalline platinum nanosheets from nonionic surfactant 2-D self-assemblies at solid/aqueous solution interfaces

Single-crystalline platinum nanosheets have been prepared via a new methodology based on the chemical reduction of a platinum salt (H2PtCl6) with hydrazine at a graphite/solution interface, using polyoxyethylene (20) sorbitan monostearate (Tween 60) based self-assembly (hemicylindrical micelle) templates. The platinum nanosheets with a uniform thickness of as thin as 3.5 +/- 1 nm are surface-smooth and continuous over relatively large length scales of micrometer sizes. In striking contrast to the Tween 60 based system, no Pt nanosheets are obtained with nonaethylene glycol monododecyl ether (C12EO9) and polyoxyethylene (23) dodecyl ether (C12EO23). No Pt nanosheets are also obtainable with a laterally homogeneous layer of Tween 60 formed at the silica/solution interface. These results indicate that surfactant Tween 60 molecules with a triple polyoxyethylene structure, as well as their hemicylindrical micelle templates, play an essential role for the formation of the Pt nanosheets. It is also suggested that the interfacially directed growth of Pt metals within the aqueous shells of the Tween 60 hemicylindrical micelles induces the thin Pt crystals as thick as the aqueous shells. The present approach could be extended to prepare a wide range of novel nanostructures of noble metals, using various micelle-like self-assemblies at interfaces.     

Non-Newtonian behavior of concentrated emulsions stabilized with globular protein in the presence of nonionic surfactant

Changes in the rheological properties of a model concentrated oil-in-water emulsion stabilized with globular protein (bovine serum albumin) upon the addition of nonionic surfactant polyoxyethylene (20) sorbitan monooleate (Tween 80) are studied. Non-Newtonian behavior is typical of the emulsions in question; moreover, they are characterized by the existence of yield stress. At stresses above the yield stress, the viscosity drops not immediately but after the intermediate Newtonian region at the flow curve. For all systems studied, the total flow curve is exhibited with the minimum Newtonian viscosity that is adequately described by the Cross formula. An increase in the Tween 80 concentration leads to a decrease in the viscosity of emulsion. Two threshold phenomena on the concentration dependences of rheological properties are revealed: at low concentration of added nonionic surfactant, the yield stress drops abruptly, whereas the viscosity lowers considerably with an increase in surfactant concentration to 1 × 10^?3 mol/l and the emulsion becomes unstable. The effects observed can be explained by the gradual displacement of high-molecular-weight stabilizer from interfacial layers and its replacement by nonionic surfactant.