Structural studies of the carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: suggestion for the initial activation site for dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.     

Hydrogen bonding affects the [NiFe] active site of Desulfovibrio vulgaris Miyazaki F hydrogenase: a hyperfine sublevel correlation spectroscopy and density functional theory study

Pulse electron paramagnetic resonance and hyperfine sublevel correlation spectroscopy have been used to investigate nitrogen coordination of the active site of [NiFe] hydrogenase of Desulfovibrio vulgaris Miyazaki F in its oxidized "ready" state. The obtained (14)N hyperfine (A = [+1.32, +1.32, +2.07] MHz) and nuclear quadrupole (e(2)qQ/h = -1.9 MHz, eta = 0.37) coupling constants were assigned to the N(epsilon) of a highly conserved histidine (His88) by studying a hydrogenase preparation in which the histidines were (15)N labeled. The histidine is hydrogen-bonded via its N(epsilon)-H to the nickel-coordinating sulfur of a cysteine (Cys549) that carries an appreciable amount of spin density. Through the hydrogen bond a small fraction of the spin density ( approximately 1%) is delocalized onto the histidine ring giving rise to an isotropic (14)N hyperfine coupling constant of about 1.6 MHz. These conclusions are supported by density functional calculations. The measured (14)N quadrupole coupling constants are related to the polarization of the N(epsilon)-H bond, and the respective hydrogen bond can be classified as being weak.     

Modeling the active sites of metalloenzymes. 4. Predictions of the unready states of [NiFe] Desulfovibrio gigas hydrogenase from density functional theory

Density functional theory has been used to predict the structures of a variety of active site models for the unready states, Ni-A and Ni-SU, of the [NiFe] hydrogenase from Desulfovibrio gigas. By comparing available experimental results on Ni-A, Ni-SU, and Ni-SI with the computational results on these model complexes, we have been able to identify the most likely formulas and structures for the active sites of Ni-A and Ni-SU. Ni-A is predicted to be a Ni(III)-Fe(II) species with the bridging hydroxo ligand, rather than the expected oxo ligand, while Ni-SU is predicted to be a Ni(II)-Fe(II) species with a water molecule coordinated to the Fe center. Both have one of the terminal S atoms (cysteines) protonated.     

Original design of an oxygen-tolerant [NiFe] hydrogenase: major effect of a valine-to-cysteine mutation near the active site

Hydrogenases are efficient biological catalysts of H(2) oxidation and production. Most of them are inhibited by O(2), and a prerequisite for their use in biotechnological applications under air is to improve their oxygen tolerance. We have previously shown that exchanging the residue at position 74 in the large subunit of the oxygen-sensitive [NiFe] hydrogenase from Desulfovibrio fructosovorans could impact the reaction of the enzyme with O(2) (Dementin, S.; J. Am. Chem. Soc. 2009, 131, 10156-10164; Liebgott, P. P.; Nat. Chem. Biol. 2010, 6, 63-70). This residue, a valine in the wild-type enzyme, located at the bottleneck of the gas channel near the active site, has here been exchanged with a cysteine. A thorough characterization using a combination of kinetic, spectroscopic (EPR, FTIR), and electrochemical studies demonstrates that the V74C mutant has features of the naturally occurring oxygen-tolerant membrane-bound hydrogenases (MBH). The mutant is functional during several minutes under O(2), has impaired H(2)-production activity, and has a weaker affinity for CO than the WT. Upon exposure to O(2), it is converted into the more easily reactivatable inactive form, Ni-B, and this inactive state reactivates about 20 times faster than in the WT enzyme. Control experiments carried out with the V74S and V74N mutants indicate that protonation of the position 74 residue is not the reason the mutants reactivate faster than the WT enzyme. The electrochemical behavior of the V74C mutant toward O(2) is intermediate between that of the WT enzyme from D. fructosovorans and the oxygen-tolerant MBH from Aquifex aeolicus.     

Mixed-valence nickel-iron dithiolate models of the [NiFe]-hydrogenase active site

A series of mixed-valence nickel-iron dithiolates is described. Oxidation of (diphosphine)Ni(dithiolate)Fe(CO)(3) complexes 1, 2, and 3 with ferrocenium salts affords the corresponding tricarbonyl cations [(dppe)Ni(pdt)Fe(CO)(3)](+) ([1](+)), [(dppe)Ni(edt)Fe(CO)(3)](+) ([2](+)) and [(dcpe)Ni(pdt)Fe(CO)(3)](+) ([3](+)), respectively, where dppe = Ph(2)PCH(2)CH(2)PPh(2), dcpe = Cy(2)PCH(2)CH(2)PCy(2), (Cy = cyclohexyl), pdtH(2) = HSCH(2)CH(2)CH(2)SH, and edtH(2) = HSCH(2)CH(2)SH. The cation [2](+) proved unstable, but the propanedithiolates are robust. IR and EPR spectroscopic measurements indicate that these species exist as C(s)-symmetric species. Crystallographic characterization of [3]BF(4) shows that Ni is square planar. Interaction of [1]BF(4) with P-donor ligands (L) afforded a series of substituted derivatives of type [(dppe)Ni(pdt)Fe(CO)(2)L]BF(4) for L = P(OPh)(3) ([4a]BF(4)), P(p-C(6)H(4)Cl)(3) ([4b]BF(4)), PPh(2)(2-py) ([4c]BF(4)), PPh(2)(OEt) ([4d]BF(4)), PPh(3) ([4e]BF(4)), PPh(2)(o-C(6)H(4)OMe) ([4f]BF(4)), PPh(2)(o-C(6)H(4)OCH(2)OMe) ([4g]BF(4)), P(p-tol)(3) ([4h]BF(4)), P(p-C(6)H(4)OMe)(3) ([4i]BF(4)), and PMePh(2) ([4j]BF(4)). EPR analysis indicates that ethanedithiolate [2](+) exists as a single species at 110 K, whereas the propanedithiolate cations exist as a mixture of two conformers, which are proposed to be related through a flip of the chelate ring. M?ssbauer spectra of 1 and oxidized S = 1/2 [4e]BF(4) are both consistent with a low-spin Fe(I) state. The hyperfine coupling tensor of [4e]BF(4) has a small isotropic component and significant anisotropy. DFT calculations using the BP86, B3LYP, and PBE0 exchange-correlation functionals agree with the structural and spectroscopic data, suggesting that the SOMOs in complexes of the present type are localized in an Fe(I)-centered d(z(2)) orbital. The DFT calculations allow an assignment of oxidation states of the metals and rationalization of the conformers detected by EPR spectroscopy. Treatment of [1](+) with CN(-) and compact basic phosphines results in complex reactions. With dppe, [1](+) undergoes quasi-disproportionation to give 1 and the diamagnetic complex [(dppe)Ni(pdt)Fe(CO)(2)(dppe)](2+) ([5](2+)), which features square-planar Ni linked to an octahedral Fe center.     

Model study of CO inhibition of [NiFe]hydrogenase

We propose a modified mechanism for the inhibition of [NiFe]hydrogenase ([NiFe]H(2)ase) by CO. We present a model study, using a NiRu H(2)ase mimic, that demonstrates that (i) CO completely inhibits the catalytic cycle of the model compound, (ii) CO prefers to coordinate to the Ru(II) center rather than taking an axial position on the Ni(II) center, and (iii) CO is unable to displace a hydrido ligand from the NiRu center. We combine these studies with a reevaluation of previous studies to propose that, under normal circumstances, CO inhibits [NiFe]H(2)ase by complexing to the Fe(II) center.     

Comparison between ultrafast fluorescence dynamics of FMN binding protein from Desulfovibrio vulgaris, strain Miyazaki, in solution vs crystal phases

Ultrafast fluorescence dynamics of FMN binding protein (FBP) from Desulfobivrio vulgaris, strain Miyaxaki F, were compared in solution and crystal phases. Fluorescence lifetimes of FBP were 167 fs (96%) and 1.5 ps (4%) in solution (tau(av) = 220 fs), and 730 fs (60%) and longer than 10 ps (40%) in crystals (tau(av) = 4.44 ps). The quenching of the fluorescence of flavin in the protein was considered to be due to photoinduced electron transfer (ET) from Trp or Tyr to the excited isoalloxazine (Iso) nearby. The average lifetime was 20 times longer in crystal vs in solution. Averaged distances between Iso and nearby Trp-32, Tyr-35, and Trp-106 were 8.42, 7.36, and 8.15 A in solution, respectively (obtained by NMR spectroscopy), and 7.05, 7.72, and 8.49 A in crystal, respectively (obtained by X-ray crystallography). The prolonged lifetime in crystal cannot be elucidated by the change in the distances between the states. It was suggested that the longer lifetime in crystal was ascribed to the absence of water molecules around FBP with rapid motional freedom, which may be the driving force for the ET in flavoproteins.     

Site-selective X-ray spectroscopy on an asymmetric model complex of the [FeFe] hydrogenase active site

The active site for hydrogen production in [FeFe] hydrogenase comprises a diiron unit. Bioinorganic chemistry has modeled important features of this center, aiming at mechanistic understanding and the development of novel catalysts. However, new assays are required for analyzing the effects of ligand variations at the metal ions. By high-resolution X-ray absorption spectroscopy with narrow-band X-ray emission detection (XAS/XES = XAES) and density functional theory (DFT), we studied an asymmetrically coordinated [FeFe] model complex, [(CO)(3)Fe(I)1-(bdtCl(2))-Fe(I)2(CO)(Ph(2)P-CH(2)-NCH(3)-CH(2)-PPh(2))] (1, bdt = benzene-1,2-dithiolate), in comparison to iron-carbonyl references. Kβ emission spectra (Kβ(1,3), Kβ') revealed the absence of unpaired spins and the low-spin character for both Fe ions in 1. In a series of low-spin iron compounds, the Kβ(1,3) energy did not reflect the formal iron oxidation state, but it decreases with increasing ligand field strength due to shorter iron-ligand bonds, following the spectrochemical series. The intensity of the valence-to-core transitions (Kβ(2,5)) decreases for increasing Fe-ligand bond length, certain emission peaks allow counting of Fe-CO bonds, and even molecular orbitals (MOs) located on the metal-bridging bdt group of 1 contribute to the spectra. As deduced from 3d → 1s emission and 1s → 3d absorption spectra and supported by DFT, the HOMO-LUMO gap of 1 is about 2.8 eV. Kβ-detected XANES spectra in agreement with DFT revealed considerable electronic asymmetry in 1; the energies and occupancies of Fe-d dominated MOs resemble a square-pyramidal Fe(0) for Fe1 and an octahedral Fe(II) for Fe2. EXAFS spectra for various Kβ emission energies showed considerable site-selectivity; approximate structural parameters similar to the crystal structure could be determined for the two individual iron atoms of 1 in powder samples. These results suggest that metal site- and spin-selective XAES on [FeFe] hydrogenase protein and active site models may provide a powerful tool to study intermediates under reaction conditions.     

Combined computational and crystallographic study of the oxidised states of [NiFe] hydrogenase

[NiFe] hydrogenases catalyse the reaction H₂↔2H⁺+2e⁻. Several states of the enzyme have been observed by spectroscopic methods. Among these, the two most oxidized states, called the unready Ni–A and Ni–SU states, have been especially intriguing, because they take a much longer time to activate than the corresponding ready Ni–B and Ni–SI states. It has recently been suggested that the unready states actually contain a (hydro)peroxide bridge between the Ni and Fe ions, in contrast to the hydroxide bridge in the ready states. In this paper, we use quantum refinement (crystallographic refinement, in which the molecular mechanics [MM] calculations, normally employed to supplement the crystallographic data, are replace by more accurate quantum mechanics [QM] calculations), combined QM/MM calculations, and accurate energy estimates to study the nature of a recent oxidised crystal structure of [NiFe] hydrogenase from Desulfovibrio fructosovorans. We show that the structure contains a mixture of several states in the active site. The experimental data is best explained by structures with a hydroxide bridge but with two of the cysteine ligands (one bridging and one terminal) partly oxidised. When the terminal Cys-543 ligand is oxidised, the sulphur occupies an alternative position, observed in several crystal structures. The Glu-25 residue, that forms a hydrogen bond to this sulphur, also changes position. A peroxide ligand may exist as a minor component in the crystal and the suggested structure is supported by the calculations. We suggest that oxidised states are slow-equilibrium mixtures of structures with a peroxide bound and structures with oxidised Cys residues, and that the former can be activated by replacement of the protonated peroxide with a H₂ or CO ligand, as has been observed in electrochemical experiments.     

Hydroxy and ether functionalized dithiolanes: Models for the active site of the [FeFe] hydrogenase

In attempt to synthesize suitable [FeFe] hydrogenase model complexes, 2-methoxypropane-1,3-dithiole and 4-methyl-4-hydroxy-1,2-dithiolane were reacted with Fe₃(CO)₁₂ to give the respective complexes [Fe₂(CO)₆(H₃COCH(CH₂S)₂)] and [Fe₂(CO)₆(HOC(CH₃)(CH₂S)₂)]. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry and elemental analysis. In addition, their electrochemical properties were investigated by cyclic voltammetry and compared with that of [Fe₂(CO)₆(HOC(CH₂S)₂)] known from literature.     

Insights into the structure of the active site of the O2-tolerant membrane bound [NiFe] hydrogenase of R. eutropha H16 by molecular modelling

Structural models for the Ni-B state of the wild-type and C81S protein variant of the membrane-bound [NiFe] hydrogenase from Ralstonia eutropha H16 were derived by applying the homology model technique combined with molecular simulations and a hybrid quantum mechanical/molecular mechanical approach. The active site structure was assessed by comparing calculated and experimental IR spectra, confirming the view that the active site structure is very similar to those of anaerobic standard hydrogenases. In addition, the data suggest the presence of a water molecule in the second coordination sphere of the active centre.     

Use of 1,10-phenanthroline in diiron dithiolate derivatives related to the [Fe-Fe] hydrogenase active site

Treatment of [Fe(2)(micro-pdt)(CO)(6)] (pdt = S(CH(2))(3)S) with 1,10-phenanthroline (phen) in refluxing toluene affords the asymmetric complex [Fe(2)(micro-pdt)(CO)(4)(phen)] (1); the protonation of with HBF(4).OEt(2) in CD(2)Cl(2) at 203 K has been monitored by (1)H NMR.     

Electronic structure of a binuclear nickel complex of relevance to [NiFe] hydrogenase

The binuclear complex [Ni(2)(L)(MeCN)(2)](3+) (L(2-) = compartmental macrocycle incorporating imine N and thiolate S donors) has a Ni(III) center bridged via two thiolate S-donors to a diamagnetic Ni(II) center. The ground-state has dominant 3d(z)(1)(2) character similar to that observed for [NiFe] hydrogenases in which Ni(III) is bridged via two thiolate donors to a diamagnetic center (Fe(II)). The system has been studied by X-ray crystallography and pulse EPR, ESEEM, and ENDOR spectroscopy in order to determine the extent of spin-delocalization onto the macrocycle L(2-). The hyperfine coupling constants of six nitrogen atoms have been identified and divided into three sets of two equivalent nitrogens. The most strongly coupled nitrogen atoms (a(iso) approximately 53 MHz) stem from axially bound solvent acetonitrile molecules. The two macrocycle nitrogens on the Ni(III) side have a coupling of a(iso) approximately 11 MHz, and those on the Ni(II) side have a coupling of a(iso) approximately 1-2 MHz. Density functional theory (DFT) calculations confirm this assignment, while comparison of the calculated and experimental (14)N hyperfine coupling constants yields a complete picture of the electron-spin density distribution. In total, 91% spin density is found at the Ni(III) of which 72% is in the 3d(z)(2) orbital and 16% in the 3d(xy) orbital. The Ni(II) contains -3.5% spin density, and 7.5% spin density is found at the axial MeCN ligands. In analogy to hydrogenases, it becomes apparent that binding of a substrate to Ni at the axial positions causes a redistribution of the electron charge and spin density, and this redistribution polarizes the chemical bonds of the axial ligand. For [NiFe] hydrogenases this implies that the H(2) bond becomes polarized upon binding of the substrate, which may facilitate its heterolytic splitting.     

Photo-induced hydrogen production in a helical peptide incorporating a [FeFe] hydrogenase active site mimic

There is growing interest in the development of hydrogenase mimics for solar fuel production. Here, we present a bioinspired mimic designed by anchoring a diiron hexacarbonyl cluster to a model helical peptide via an artificial dithiol amino acid. The [FeFe]-peptide complex catalyses photo-induced production of hydrogen in water.     

镍铁氢化酶活性中心的结构、催化机理及化学模拟

镍铁氢化酶具有催化分裂重组氢分子的功能，由于其独特的活性中心结构和催化性能及方便、廉价利用氢能源的前景，引起生物学家和化学家的关注，他们对镍铁氢化酶活性中心结构、催化机理及化学模拟做了深入细致研究，本文对此做系统概述和总结。     

Chelate control of diiron(I) dithiolates relevant to the [Fe-Fe]- hydrogenase active site

The reaction of Fe2(S2C2H4)(CO)6 with cis-Ph2PCH=CHPPh2 (dppv) yields Fe2(S2C2H4)(CO)4(dppv), 1(CO)4, wherein the dppv ligand is chelated to a single iron center. NMR analysis indicates that in 1(CO)4, the dppv ligand spans axial and basal coordination sites. In addition to the axial-basal isomer, the 1,3-propanedithiolate and azadithiolate derivatives exist as dibasal isomers. Density functional theory (DFT) calculations indicate that the axial-basal isomer is destabilized by nonbonding interactions between the dppv and the central NH or CH2 of the larger dithiolates. The Fe(CO)3 subunit in 1(CO)4 undergoes substitution with PMe3 and cyanide to afford 1(CO)3(PMe3) and (Et4N)[1(CN)(CO)3], respectively. Kinetic studies show that 1(CO)4 reacts faster with donor ligands than does its parent Fe2(S2C2H4)(CO)6. The rate of reaction of 1(CO)4 with PMe3 was first order in each reactant, k = 3.1 x 10(-4) M(-1) s(-1). The activation parameters for this substitution reaction, DeltaH = 5.8(5) kcal/mol and DeltaS = -48(2) cal/deg.mol, indicate an associative pathway. DFT calculations suggest that, relative to Fe2(S2C2H4)(CO)6, the enhanced electrophilicity of 1(CO)4 arises from the stabilization of a "rotated" transition state, which is favored by the unsymmetrically disposed donor ligands. Oxidation of MeCN solutions of 1(CO)3(PMe3) with Cp2FePF6 yielded [Fe2(S2C2H4)(mu-CO)(CO)2(dppv)(PMe3)(NCMe)](PF6)2. Reaction of this compound with PMe3 yielded [Fe2(S2C2H4)(mu-CO)(CO)(dppv)(PMe3)2(NCMe)](PF6)2.     

Synthesis, characterization and some properties of mononuclear Ni and trinuclear NiFe2 complexes related to the active site of [NiFe]-hydrogenases

The [N(2)S(2)]-type ligand 1,2-(2-C(5)H(4)NCH(2)S)(2)C(6)H(4) (L) is prepared in 84% yield by a new method and its structure has been confirmed by X-ray crystallography. The new synthetic method involves sequential reaction of 1,2-phenylenedithiol with EtONa followed by treatment of the resulting disodium salt of 1,2-phenylenedithiol with in situ generated 2-(chloromethyl)pyridine from its HCl salt. Further treatment of ligand L with NiCl(2)·6H(2)O or NiI(2) affords the expected new mononuclear Ni complexes Ni[1,2-(2-C(5)H(4)NCH(2)S)(2)C(6)H(4)]Cl(2) (1) and Ni[1,2-(2-C(5)H(4)NCH(2)S)(2)C(6)H(4)]I(2) (3) in 87-88% yields, whereas reaction of L with NiBr(2) under similar conditions results in formation of the expected new mononuclear complex Ni[1,2-(2-C(5)H(4)NCH(2)S)(2)C(6)H(4)]Br(2) (2) and one unexpected new mononuclear complex Ni[1-(2-C(5)H(4)NCH(2)S)-2-(2-C(5)H(4)NCH(2)SC(6)H(4)S)C(6)H(4)]Br(2) (2*) in 82% and 5% yields, respectively. More interestingly, the ligand L-containing novel trinuclear NiFe(2) complex Ni{[1,2-(2-C(5)H(4)NCH(2)S)(2)C(6)H(4)}Fe(2)(CO)(6)(μ(3)-S)(2) (4) is found to be prepared by sequential reaction of (μ-S(2))Fe(2)(CO)(6) with Et(3)BHLi, followed by treatment of the resulting (μ-LiS)(2)Fe(2)(CO)(6) with mononuclear complex 1, 2, or 3 in 12-20% yields. The new complexes 1-4 and 2* are fully characterized by elemental analysis and various spectroscopies, and the crystal structures of 1, 2* and 3 as well as some electrochemical properties of 1-4 are also reported.     

Simultaneous analyses of photoinduced electron transfer in the wild type and four single substitution isomers of the FMN binding protein from Desulfovibrio vulgaris, Miyazaki F

The mechanism of photoinduced electron transfer (PET) from the aromatic amino acids (Trp32, Tyr35 and Trp106) to the excited flavin mononucleotide (FMN) in the wild type (WT) and four single amino acid substitution isomers (E13T, E13Q, W32A and W32Y) of FMN binding protein (FBP) from the Desulfovibrio vulgaris (Miyazaki F) were simultaneously analyzed (Method A) with the Marcus-Hush (MH) theory and Kakitani-Mataga (KM) theory using ultrafast fluorescence dynamics of these proteins. In addition, the PET mechanism of the WT, E13T and E13Q FBP systems (Method B) were also analyzed with both MH and KM theories. The KM theory could describe all of the experimental fluorescence decays better than the MH theory by both Methods A and B. The PET rates were found to largely depend on the electrostatic energies between photo-products, isoalloxazine (Iso) anion and the PET donor cations, and the other ionic groups, and hence on static dielectric constants. The dielectric constant (ε(0)(DA)) around the PET donors and acceptor was separately determined from those (ε(0)(j), j = WT, E13T, E13Q, W32Y and W32A) in the domain between the Iso anion or the donor cations and the other ionic groups in the proteins. The values of ε(0)(DA) were always lower than those of ε(0)(j), which is reasonable because no amino acid exists between the PET donors and acceptor in all systems. The values of the dielectric constants ε(0)(j) (j = WT, E13T and E13Q) were similar to those obtained previously from the analysis of the crystal structures and the average lifetimes of these FBP proteins. Energy gap law in the FBP systems was examined. An excellent parabolic function of the logarithms of the PET rates was obtained against the total free energy gap. The PET in these FBP isomers mostly took place in the so-called normal region, and partly in the inverted region.     

Influence of an electron-deficient bridging o-carborane on the electronic properties of an [FeFe] hydrogenase active site model

The IR carbonyl stretching frequencies of [Fe2(SRS)(CO)6] complexes correlate well with their first reduction potential; an [FeFe] hydrogenase model with a very mild reduction potential has been realized by using a strongly electron deficient carborane-dithiolate bridge.