Polymer networks functionalized with low-valent phosphorus cations

In this work, we show that polymer networks composed of tertiary alkyl phosphines can be cleanly functionalized with phosphino-phosphonium or triphosphenium cations. Methods for functionalizing the polymers range from halide abstraction of commercially available reagents, to ligand exchange from simple to make reported compounds, and finally, macromolecular ligand design guided by observations made at the molecular level to accommodate the formation of kinetically favored triphosphenium cation functionalized networks. The synthesis, comprehensive characterization, and comparison of the new polymers to molecular analogues is outlined. It is shown the addition of the low valent phosphorus centers to the polymer network has the effect of tuning material physical properties.     

Supported lipid bilayers on spacious and pH-responsive polymer cushions with varied hydrophilicity

We report the successful formation of supported multicomponent lipid bilayer membranes (sLBMs) on polymer cushions consisting of a set of alternating maleic acid copolymers. The formation of sLBMs was triggered by a transient reduction of the electrostatic repulsion between the polymer cushions and the lipid vesicles by lowering the solution's pH to 4. Upon formation, the stability of the sLBMs was not affected by subsequent variations of the environmental pH. The degree of hydrophilicity and swelling of the anionic polymer cushions was found to determine both the kinetics of the membrane formation and the mobility of the lipid bilayer with lipid diffusion coefficients in the range from 0.26 to 2.6 microm2s(-1). The introduced polymer cushion system is concluded to provide a versatile base for the integration of active transmembrane proteins in sLBMs.     

Interaction of bis-aryl functionalized molecules with nucleosides and nucleic acids

A series of novel molecules with a cyclen(1,4,7,10-tetraazacyclododecane) moiety appended on and bearing different aromatic fragments in the structures were synthesized and characterized.The binding activities of these compounds towards DNA were systematically studied by spectroscopic,viscometric and gel electrophoresis methods.The results suggest that the stacking interaction plays an important role in improving the DNA binding ability of the compounds.The binding modes of the compounds towards DNA are als...     

Synthesis and self-assembly of functionalized donor-sigma-acceptor molecules

[structure: see text] 3,5,7-Tris(arylmethyl)-1-aza-adamantanetrione donor-sigma-acceptor compounds have been synthesized in four steps. Computational and (1)H NMR analyses rationalize the solubility, gelation, and conformational properties of the C3-symmetric molecules toward employing sigma-coupled donor-acceptor interactions in molecular self-assembly.     

Polymer hybrids with functionalized silsesquioxanes via two physical interactions in one system

Transparent and homogeneous polymer hybrids were obtained from a series of random styrene/N,N‐dimethylacrylamide copolymers (PSnPAm) and octa(3‐hydroxypropyldimethylsiloxy)octasilsesquioxane (Cube‐OH) by means of the sol–gel reaction of phenyltrimethoxysilane (PTMOS). The resulting ternary polymer hybrids were prepared via two simultaneous physical interactions [hydrogen‐bonding and aromatic (π–π) interactions] in one system. Cube‐OH and PTMOS were used to form hydrogen‐bonding and aromatic (π–π) interactions, respectively, with the organic copolymer. When PS90PA10 was used as an organic polymer for the two physical interactions, the transparency was maintained when the weight ratio of Cube‐OH to PTMOS was increased to 0.5. However, the polymer hybrids with PS65PA35 produced optically translucent or turbid materials, which indicated the phase separation of the organic polymer and silica gel. The homogeneity of the ternary polymer hybrids was dependent on the balance between the intensity of the hydrogen‐bonding interaction and that of the aromatic (π–π) interaction. The homogeneity was supported by the results of Fourier transform infrared, differential scanning calorimetry, scanning electron microscopy, and X‐ray diffraction, which demonstrated a nanometer‐level integration of the organic polymer, Cube‐OH, and silica gel. The initial decomposition temperature of the ternary polymer hybrids was more dependent on the amount of PTMOS than on that of Cube‐OH. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1306–1315, 2003     

Weakly coupled lipid bilayer membranes on multistimuli-responsive poly(N-isopropylacrylamide) copolymer cushions

Polymer-cushioned lipid bilayers are frequently used to mimic the native environment of cellular membranes in respect to the extracellular matrix and intracellular structures. With the aim to actively tune lipid membrane characteristics, we pursue the approach to use temperature and pH responsive polymer thin films of poly(N-isopropylacrylamide-co-carboxyacrylamide) (PNIPAAm-co-carboxyAAM) as cushions for supported lipid bilayers. A cationic lipid bilayer composed of dioleoylphosphatidylcholine (DOPC) and dioleoyltrimethylammoniumpropane (DOTAP) (9:1) was formed on top of the polymer thin film in a drying/rehydration process. Fluorescence recovery after photobleaching (FRAP) yielded higher lipid diffusion coefficients (6.3-9.6 μm(2) s(-1)) on polymer cushions in comparison to solid glass supports (3.0-5.9 μm(2) s(-1)). No correlation of the lipid mobility was found with the swelling state of (PNIPAAm-co-carboxyAAM), which is ascribed to restrained interfacial electrostatic interactions and dispersion forces. The results revealed a minimal coupling of the lipid bilayer with the polymer cushions, and thus, bilayers supported by (PNIPAAm-co-carboxyAAM) provide interesting opportunities for unperturbed lipid diffusion combined with control of transmembrane protein mobility due to the impact of a tunable frictional drag.     

Polymer synthesis using functionalized alkyllithium initiators: Telechelic,heterotelechelic and functionalized star-branched polymers

Alkyllithium initiators with hydroxyl groups protected with either t-butoxy or t-butyldimethylsiloxy groups have been used to prepare α-functionalized polymers, α,ω-telechelic, α,ω-heterotelechelic and multifunctional star-branched polymers.     

Polymer functionalized submicrometric emulsions as potential synthetic DNA vectors

Triglyceride-based emulsions were first prepared by a solvent displacement procedure which was modified to achieve their functionalization by surface deposition of various amphiphilic comb-like copolymers. These emulsions have been characterized as regards to hydrodynamic particle size and surface charges using dynamic light scattering and electrophoretic mobility measurements. The adsorption isotherms of a polydT15 oligonucleotide and a model plasmid showed that the process was dependent on the nature of the interfaces, the affinity for the nucleic acid increasing with more cationic charges, together with improved accessibility. The binding process was found to proceed according to two regimes: one at low nucleic acid coverage, independent of the initial plasmid concentration, and the second one at high coverage, which was nucleic-acid-concentration dependent. This behavior was considered to occur because of the development of repulsive interactions upon increasing the amount of immobilized nucleic acid. The complexation of plasmid complexed at the interface was finally investigated using the ethidium bromide displacement technique. The level of compaction of plasmid complexed onto the functionalized emulsions was lower than that obtained with the parent free polymer.     

Supported lipid bilayers lifted from the substrate by layer-by-layer polyion cushions on self-assembled monolayers

The formation of lipid bilayers, lifted from the solid substrate by layer-by-layer polyion cushions, on self-assembled monolayers (SAMs) on gold was investigated by surface plasmon resonance (SPR) and fluorescence recovery after photobleaching (FRAP). The polyions poly(diallyldimethylammonium chloride) (PDDA) and polystyrene sulfonate (PSS) sodium salt were used for the layer-by-layer polyion macromolecular assembly. The cushion was formed by electrostatic interaction of PDDA/PSS/PDDA layers with a negatively charged surface of an SAM of 11-mercaptoundecanoic acid (MUA) on gold. The lipid bilayer membranes were deposited by vesicle fusion with different compositions of SOPS (an anionic lipid, 1-stearoyl-2-oleoyl-phosphatidylserine) and POPC (a zwitterionic lipid, 1-palmitoyl-2-oleoylphosphatidylcholine). In the case of pure SOPS and for lipid mixtures with a POPC composition up to 25%, single bilayers were deposited. FRAP experiments showed that single bilayers supported on PDDA/PSS/PDDA/MUA were mobile at room temperature, with lateral coefficients of approximately (1.2–2.1)×10⁻⁹ cm²/s. The kinetics of the addition of the ion-channel-forming peptide protegrin-1 to the supported bilayers was detected by SPR. A two-step interaction was observed, similar to the association behavior of protegrin-1 with bilayers supported on PDDA/MUA. The results are similar to that of supported lipid bilayers without a layer-by-layer cushion. The model membrane system in this work is a potential biosensor for mimicking the natural activities of biomolecules and is a possible tool to investigate the fundamental properties of biomembranes.     

Immobilizing single lipid and channel molecules in artificial lipid bilayers with annexin A5

The effects of annexin A5 on the lateral diffusion of single-molecule lipids and single-molecule proteins were studied in an artificial lipid bilayer membrane. Annexin A5 is a member of the annexin superfamily, which binds preferentially to anionic phospholipids in a Ca2+-dependent manner. In this report, we were able to directly monitor single BODIPY 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (DHPE) and ryanodine receptor type 2 (RyR2) labeled with Cy5 molecules in lipid bilayers containing phosphatidylserine (PS) by using fluorescence microscopy. The diffusion coefficients were calculated at various annexin A5 concentrations. The diffusion coefficients of BODIPY-DHPE and Cy5-RyR2 in the absence of annexin A5 were 4.81 x 10(-8) cm(2)/s and 2.13 x 10(-8) cm(2)/s, respectively. In the presence of 1 microM annexin A5, the diffusion coefficients of BODIPY-DHPE and Cy5-RyR2 were 2.2 x 10(-10) cm(2)/s and 9.5 x 10(-11) cm(2)/s, respectively. Overall, 1 microM of annexin A5 was sufficient to induce a 200-fold decrease in the lateral diffusion coefficient. Additionally, we performed electrophysiological examinations and determined that annexin A5 has little effect on the function of RyR2. This means that annexin A5 can be used to immobilize RyR2 in a lipid bilayer when imaging and analyzing RyR2.     

Displacement of adsorbed functionalized polystyrene-block-butadiene copolymers by small molecules

This work deals with the displacement of end-anchored copolymers by the addition of solvent displacer. The adsorption behavior of functionalized polystyrene-block-polybutadiene diblock copolymers from dilute solution in toluene using silicon wafers as solid substrates is investigated by means of null-ellipsometry. The desorption phenomena are observed by adding displacers of low molecular weight to the mixture. The displacers used are tetrahydrofuran (THF) and acetone. The critical composition of the binary solvent mixture at which the desorption is complete, is determined experimentally.     

Star-shaped and linear nanosized molecules functionalized with hexa-peri-hexabenzocoronene: synthesis and optical properties

[structure: see text] A synthetic strategy promising the establishment of a new star-shaped and linear polycyclic aromatic hydrocarbons (PAHs) family with distinct molecular topologies has been developed. The Sonogashira reaction between the iodide derivatives 2a-e and phenylacetylene catalyzed with Pd(0) affords 3a-e in high yields. The Diels-Alder and decarbonylation reactions between 3a-e and tetraphenylcyclophentadiene following the oxidation by FeCl(3) produce the star-shaped and linear PAHs 5a-e containing a five-membered ring. The structural analysis and the optical properties of all new compounds are performed by a combination of MALDI-TOF mass spectrometry, UV-vis, and fluorescence spectrometry. The electronic and photophysical properties are studied by orthogonal comparisons of the absorption and fluorescence spectra in THF solutions, which not only give insight into the interactions among aromatic submoieties in each molecule and the effects of meta-conjugation and para-conjugation on electronic delocalization, but also indicate effective conjugation length variations from oligophenylacetylenes 3a-e to oligophenylene dendrimers 4a-e and PAHs 5a-e. The star-shaped 5c exhibits the highest aggregation in excited states compared with the other four hexa-peri-hexabenzocoronene (HBC) derivatives.     

Polymer encapsulation within giant lipid vesicles

We report encapsulation of polymers and small molecules within individual giant lipid vesicles (GVs; 3-80 microm), as determined by confocal fluorescence microscopy. Polymer-bound or free dyes were encapsulated within GVs by including these molecules in the aqueous solution during vesicle formation via gentle hydration. Encapsulation efficiencies of individual GVs (EE(ind)) were determined from the fluorescence intensity ratio inside vs outside the vesicle. EE(ind) varied considerably from vesicle to vesicle, with interior solute concentrations for GVs within the same batch ranging from much less than to slightly more than the initial concentration. The majority of GVs had high internal concentrations of polymer or small-molecule encapsulants equal to or slightly greater than the external concentration. EE(ind) decreased for high molecular weight polymers (e.g., dextran 500 000), but was relatively insensitive to the GV diameter, membrane composition, or incubation temperature in our experiments. Knowledge of EE(ind) is important for quantitative evaluation of reactions occurring within GVs (e.g., enzymatic processes) and for optimizing encapsulation conditions.     

Polymer matrix of polyethylene porous films functionalized by electrical discharge plasma

The polyethylene porous films were treated by dielectric surface barrier discharge (DSBD) plasma at atmospheric pressure in oxygen (O₂) or nitrogen (N₂), and by radio-frequency discharge (RFD) plasma in air at reduced pressure 46 Pa. The surface energy of films was carried out by direct measurements of contact angles of six testing liquids. The strength of adhesive joints in the system modified polyethylene porous films - polyacrylate was measured by peeling of the joints under the angle of 90°. The significant increase of the surface energy and its polar component of polyethylene porous films modified by all types of plasma were observed. The higher strengths of adhesive joints were found for modification of polyethylene porous films by radio-frequency discharge plasma in comparison with modification of the films by barrier discharge plasma.     

Reversible affinity interactions of antibody molecules at functionalized dendrimer monolayer: affinity-sensing surface with reusability

We described reversible affinity interactions of antibody molecules at a chemically functionalized electrode surface for a repeatedly renewable affinity-biosensing interface. Underlying biofunctionalizable monolayers were constructed with poly(amidoamine) dendrimers, whose surface chain-end groups were double-functionalized with biotinyl ligand and ferrocenyl groups for biospecific recognition and electron transfer reactions, respectively. Functionalized monolayers on gold electrodes provide platform surfaces for biospecific recognition reaction with monoclonal anti-biotin antibody molecules. Bound antibody molecules were dissociated from the surface via displacement reaction by the addition of free biotin in solution, enabling the affinity surface to be renewed and repeatedly utilized. Tracking of the association/dissociation reaction cycles were performed by registering the bioelectrocatalytic currents at the electrode using glucose oxidase (GOx) as a signal generator and ferrocenyl-tethered dendrimer (Fc-D) as an electron transferring mediator in electrolyte. Shielding of the affinity surface by biospecifically bound antibody molecules caused hindrance in electron transfer, resulting in reduced signal from cyclic voltammetry. By the displacement reaction using free biotin, bound antibody molecules were dissociated from the surface and the bioelectrocatalytic signal was restored. With the affinity surfaces constructed in this work, continuous association/dissociation reactions have been successfully accomplished, providing a possibility of reusable affinity biosensing interface.     

Graphical prediction of quantum interference-induced transmission nodes in functionalized organic molecules

Quantum interference (QI) in molecular transport junctions can lead to dramatic reductions of the electron transmission at certain energies. In a recent work [Markussen et al., Nano Lett., 2010, 10, 4260] we showed how the presence of such transmission nodes near the Fermi energy can be predicted solely from the structure of a conjugated molecule when the energies of the atomic p(z) orbitals do not vary too much. Here we relax the assumption of equal on-site energies and generalize the graphical scheme to molecules containing different atomic species. We use this diagrammatic scheme together with tight-binding and density functional theory calculations to investigate QI in linear molecular chains and aromatic molecules with different side groups. For the molecular chains we find a linear relation between the position of the transmission nodes and the side group π orbital energy. In contrast, the transmission functions of functionalized aromatic molecules generally display a rather complex nodal structure due to the interplay between molecular topology and the energy of the side group orbital.