Effect of surface chemical composition on the work function of silicon substrates modified by binary self-assembled monolayers

It has been shown that the application of self-assembled monolayers (SAMs) to semiconductors or metals may enhance the efficiency of optoelectronic devices by changing the surface properties and tuning the work functions at their interfaces. In this work, binary SAMs with various ratios of 3-aminopropyltrimethoxysilane (APTMS) and 3-mercaptopropyltrimethoxysilane (MPTMS) were used to modify the surface of Si to fine-tune the work function of Si to an arbitrary energy level. As an electron-donor, amine SAM (from APTMS) produced outward dipole moments, which led to a lower work function. Conversely, electron-accepting thiol SAM (from MPTMS) increased the work function. It was found that the work function of Si changed linearly with the chemical composition and increased with the concentration of thiol SAMs. Because dipoles of opposite directions cancelled each other out, homogeneously mixing them leads to a net dipole moment (hence the additional surface potential) between the extremes defined by each dipole and changes linearly with the chemical composition. As a result, the work function changed linearly with the chemical composition. Furthermore, the amine SAM possessed a stronger dipole than the thiol SAM. Therefore, the SAMs modified with APTMS showed a greater work function shift than did the SAMs modified with MPTMS.     

Adsorption behavior of plasmid DNA on binary self-assembled monolayers modified gold substrates

Gold is known to have good biocompatibility because of its inert activity and the surface property can be easily tailored with self-assembled monolayers (SAMs). In previous works, gold surfaces were tailored with homogeneously mixed amine and carboxylic acid functional groups to generate surfaces with a series of isoelectronic points (IEPs). In other words, by tailoring the chemical composition in binary SAMs, different surface potentials can be obtained under controlled pH environments. To understand how the surface potentials affect the interaction at the interface, a binary-SAMs-modified Au electrode on a quartz crystal microbalance with dissipation detection (QCM-D) was used owing to the high weight sensitivity of QCM-D. In QCM-D, the frequency shift and the energy dissipation are monitored simultaneously to determine the adsorption behaviors of the plasmid DNA to surfaces of various potentials in Tris-buffered NaCl solutions of different pH. The results revealed that the plasmid DNA can be adsorbed on the SAM-modified surfaces electrostatically; thus, in general, the amount of adsorbed plasmid DNA decreased with increasing environmental pH and the decreasing ratio of the amine functional groups on the surfaces owing to weaker positive potentials on the surface. For the high amine-containing surfaces, due to the strong electrostatic attraction, denser films were observed, and thus, the apparent thickness decreased slightly. The negatively charged carboxylic acid surfaces can still adsorb the negatively charged plasmid DNA at some conditions. In other words, the electrostatic model cannot explain the adsorption behavior completely, and the induced dipole (Debye) interaction between the charged and polarizable molecules needs to be considered as well.     

Effect of surface chemical composition on the surface potential and iso-electric point of silicon substrates modified with self-assembled monolayers

Self-assembled monolayer (SAM)-modified nano-materials are a new technology to deliver drug molecules. While the majority of these depend on covalently immobilizing molecules on the surface, it is proposed that electrostatic interactions may be used to deliver drugs. By tuning the surface potential of solid substrates with SAMs, drug molecules could be either absorbed on or desorbed from substrates through the difference in electrostatic interactions around the selected iso-electric point (IEP). In this work, the surface of silicon substrates was tailored with various ratios of 3-aminopropyltrimethoxysilane (APTMS) and 3-mercaptopropyltrimethoxysilane (MPTMS), which form amine- and thiol-bearing SAMs, respectively. The ratio of the functional groups on the silicon surface was quantified by X-ray photoelectron spectrometry (XPS); in general, the deposition kinetics of APTMS were found to be faster than those of MPTMS. Furthermore, for solutions with high MPTMS concentrations, the relative deposition rate of APTMS increased dramatically due to the acid-base reaction in the solution and subsequent electrostatic interactions between the molecules and the substrate. The zeta potential in aqueous electrolytes was determined with an electro-kinetic analyzer. By depositing SAMs of binary functional groups in varied ratios, the surface potential and IEP of silicon substrates could be fine-tuned. For <50% amine concentration in SAMs, the IEP changed linearly with the chemical composition from <2 to 7.18. For higher amine concentrations, the IEP slowly increased with concentration to 7.94 because the formation of hydrogen-bonding suppressed the subsequent protonation of amines.     

Effect of surface composition on the adsorption of photosystem I onto alkanethiolate self-assembled monolayers on gold

We have used self-assembled monolayers (SAMs) prepared from omega-terminated alkanethiols on gold to generate model surfaces and examine the effect of surface composition on the adsorption of Photosystem I (PSI), stabilized in aqueous solution by Triton X-100. Triton-stabilized PSI adsorbs to high-energy surfaces prepared from HO- and HO2C-terminated alkanethiols but does not adsorb to low-energy surfaces. The inhibition of PSI adsorption at low-energy surfaces is consistent with the presence of a layer of Triton X-100 that adsorbs atop the hydrophobic SAM and presents a protein-resistant poly(ethylene glycol) (PEG) surface. While the presence of the PEG surface prevents the adsorption of PSI, the displacement of the inhibiting layer of Triton X-100 by dodecanol, a more active surfactant, greatly enhances the adsorption of PSI. This inhibiting effect by Triton X-100 can be extended to other protein systems such as bovine serum albumin.     

Ferrocenylalkylthiolates as a probe of heterogeneity in binary self-assembled monolayers on gold

The oft-cited complexity of tethered ferrocene electrochemistry in single component (FcRS-) or binary (FcRS-/CH3R'S-) self-assembled monolayers (SAMs) on gold has been investigated. The complex voltammetry is shown to be linked to local electrostatics caused by the formation of the ferrocenium ion. This conclusion is reached by studying model effects in binary SAMs, where a cationic alkylthiolate (H3N+ C11S-Au) is mixed with FcC12S-Au. A fitting procedure involving both a Gaussian and a Lorentzian distribution is used for deconvolution of the two peaks which are consistently observed in the SAMs when chi(Fc)surf > or = 0.2. The lower-potential (E degrees ' = 250 mV) and higher-potential (E degrees ' = 350 mV) voltammetric peaks are assigned to Fc moieties in "isolated" and "clustered" states, respectively. Use of this method to better understand SAM structure is demonstrated by distinguishing the degree of homogeneity in two binary SAMs of similar composition.     

Stepwise synthesis of Gly-Gly-His on gold surfaces modified with mixed self-assembled monolayers

Peptide-modified electrode surfaces have been shown to have excellent recognition properties for metal ions. An efficient method of screening a potential peptide for its selectivity for a given metal would involve the synthesis of the peptide directly on the electrode surface. This paper outlines a procedure in which the tripeptide Gly-Gly-His was synthesized one amino acid at a time on a gold surface modified with a self-assembled monolayer of the mixed alkanethiolates 3-mercaptopropionic acid (MPA) and 3-mercaptopropane (MP). Electrochemistry and high-resolution mass spectrometry were used to elucidate the structure of the adsorbed species and follow the synthesis. The amino acids can be attached only to MPA, but the presence of a diluting unreactive molecule of MP reduces steric crowding about the reaction center. The maximum coverage of synthesized tripeptide occurs at a ratio of MPA/MP of 1:1.     

Electron transfer of horse spleen ferritin at gold electrodes modified by self-assembled monolayers

Electron transfer is known to be an important step in the sequestering of iron by cellular ferritin. In this work, direct electron transfer between ferritin and a gold electrode was performed in order to probe its electron transfer kinetics. Gold electrodes were modified by the formation of self-assembled monolayers of 3-mercapto-propionic acid on the gold surface. Cyclic voltammetry using these electrodes shows that ferritin exhibits slow electron transfer kinetics at low potentials, yet fairly well-defined current—potential curves. In addition, the voltammetry indicates that adsorption of ferritin precedes the electron transfer step. Controlled potential electrolysis measurements yielded an n-value of 1910 electrons transferred per mole of ferritin. Cyclic voltammetry of a solution containing ferritin as well as nitrilotriacetate yields no electrolytic currents at potentials where the iron—nitrilotriacetate complex undergoes redox reactions, indicating that the currents observed in the voltammetry of ferritin were not due to free iron in the ferritin sample. In addition, the voltammetry of iron-free ferritin (apoferritin) did not yield appreciable currents, providing additional support to the suggestion that the observed voltammetric currents were due to the redox reactions of ferritin iron. Self-assembled monolayers containing carboxylate end groups effectively promoted the direct electron transfer of ferritin at a gold electrode, thus demonstrating that the electron transfer mechanisms of ferritin can now be probed electrochemically.     

Electrochemical behavior of epinephrine at l-cysteine self-assembled monolayers modified gold electrode

The electrochemical behaviors of epinephrine (EP) at the l-cysteine self-assembled monolayers modified gold electrode have been studied. The modified electrode shows an excellent electrocatalytic activity for the oxidation of EP and accelerates electron transfer rate. The diffusion coefficient (D) is 1.48x10(-7) cm(2) s(-1). FTIR has shown that cysteine can bind onto the gold surface through the strong sulfur-gold interaction. The electrocatalytic mechanism to EP has been studied. The catalytic current of EP nu s its concentration has a good linear relation in the range of 1.0x10(-7)-2.0x10(-6) mol l(-1), with the correlation coefficient of 0.9989 by differential pulse voltametric (DPV) response. Detection limit is down to 1.0x10(-8) mol l(-1). At a high EP concentration, the relationship between the catalytic current and its concentration exhibits a Michaelis-Menten kinetic mechanism for the electrocatalytic process and the constant K(m) is about 0.155 mmol l(-1). The highest catalytic current I(m) is 2.72 muA. The modified electrode can be used for the determination of EP in practical injection. The method is simple, quick, sensitive and accurate.     

Surface-enhanced infrared ellipsometry of self-assembled undecanethiol and dodecanethiol monolayers on disordered gold nanoisland substrates

Infrared spectroscopic ellipsometry (IRSE) is a powerful optical probe of various chemical and physical properties of molecules adsorbed onto solid surfaces. In particular, IRSE can be useful for detecting adsorption-induced changes in the IR spectra of self-assembled monolayers (SAMs), and unlike traditional IR absorption spectroscopies, IRSE provides useful information about the phase of the reflected radiation from the SAMs. However, in the standard IRSE experimental geometry using flat substrates for SAMs, the detectable signal containing these phase data is considerably weaker than the corresponding absorbance data. In our present work, we demonstrate that enhancing the local optical fields at the sample surface through the use of a disordered Au nanoisland substrate can substantially increase both these absorbance and phase signals. We also demonstrate how this surface-enhanced infrared spectroscopic ellipsometry (SEIRSE) can be utilized for straightforward analysis of absorption peak widths, as well as to obtain information about the orientation of the terminal methyl on adsorbed SAMs. As model SAMs for this study, we use undecanethiol (UDT) containing 10 CH(2) units and a terminal CH(3) group, as well as dodecanethiol (DDT) containing 11 CH(2) units with its terminal CH(3) at a different orientation than UDT. We show that surface-enhanced IRSE is sensitive to subtle vibrational signatures of the differently oriented terminal methyls of these two homologous alkanethiol SAMs.     

Tailoring the Cu(100) work function by substituted benzenethiolate self-assembled monolayers

The structure and electronic interface properties of five differently substituted benzenethiol based self-assembled monolayers (SAMs) on Cu(100) have been studied by means of low energy electron diffraction, thermal desorption spectroscopy, X-ray absorption spectroscopy (NEXAFS), and UV photoelectron spectroscopy. Because highly ordered SAMs are formed of which lateral density had been precisely determined, effective molecular dipole moments were derived from the measured work function shifts. These values are compared with gas phase dipole moments computed by quantum chemical calculations for the individual thiol molecules considering the molecular orientation determined from NEXAFS data. Furthermore, this comparison yields clear evidence for a coverage dependent depolarization effect of the adsorbed molecules within the SAMs.     

Evaporation of microdroplets of ethanol-water mixtures on gold surfaces modified with self-assembled monolayers

The wetting property and evaporation behavior of ethanol-water mixtures of various concentrations on gold surfaces modified with 1-decanethiolate self-assembled monolayers (SAMs) were studied by digital contact angle analysis. It has been shown that the initial contact angle decreases monotonically with increased concentration of ethanol in the mixture. Evaporation studies revealed a general trend with a preliminary increase in contact angle accompanied with a decrease in contact area, then a constant contact angle accompanied with a slower, linear decrease in contact area. At the very beginning of the evaporation process, the contact angles showed a rapid decrease for the microdroplets of a binary mixture with equal volume fractions (i.e., 50% ethanol). Three distinct stages of the evaporation profile for the ethanol-water mixtures were observed, which differ from the inclusive "pinning" and "shrinking" behavior observed for the pure liquid case. Ultimately, the study makes possible the use of an evaporation profile to monitor the change in concentration of a binary system and allows a better understanding of the interactions between liquid microdroplets with solid substrates.     

Electroformation of peptide self-assembled monolayers on gold

The application of a potential to deposit a monolayer of 3-mercaptopropionic acid-histidinyl-histidinyl-histidinyl-aspartyl-aspartyl (3-MPA-HHHDD-OH) controls the density and molecular structure of the peptide monolayer, which results in different wettabilities of the surface, surface density, orientation of the molecule (extended or bent), and nonspecific adsorption of serum proteins. 3-MPA-HHHDD-OH must be deposited at 200 mV to maintain an extended configuration, which promoted low biofouling properties.     

Voltammetry of immobilized cytochrome c on novel binary self-assembled monolayers of thioctic acid and thioctic amide modified gold electrodes

Horse heart cytochrome c (cyt c) was adsorbed on the binary self-assembled monolayers (SAMs) composed of thioctic acid (T-COOH) and thioctic amide (T-NH₂) at gold electrodes via electrostatic interaction. The cyt c adsorbed on the modified gold electrode exhibited well-defined reversible electrochemical behavior in 10 mM phosphate buffer solution (PBS, pH 7.0). The surface concentration (Γ) of electroactive species, cyt c, on the binary SAMs was higher than that in single-component SAMs of T-COOH, and reached a maximum value of 9.2 × 10⁻¹² mol cm⁻² when the ratio of T-COOH to T-NH₂ in adsorption solution was of 3:2, and the formal potential (E^0′=(E_pa+E_pc)/2) of cyt c was −0.032 V (vs. Ag|AgCl (3 M NaCl)) in a 10 mM PBS. The interaction between cyt c and the binary SAMs made the E^0′ shift negatively when compared with that of cyt c in solution (+0.258 V vs. NHE, i.e., +0.058 V vs. Ag|AgCl (3 M NaCl)). The fractional coverage of bound cyt c was a 0.64 theoretical monolayer. The standard electron transfer rate constant of cyt c immobilized on the binary SAMs was also higher than that on single-component SAMs of T-COOH, and the maximum value of 15.8 ± 0.6 s⁻¹ was obtained when the ratio of T-COOH to T-NH₂ in adsorption solution was at 3:2. The results suggest that the electrode modified with the binary SAMs functions better than the electrode modified with single-component SAMs of T-COOH.     

Adsorption of self-assembled monolayers of mercaptan on gold

XPS and AES are suitable techniques for studying organic monolayers on metals if radiation doses are kept low. The adsorption of self-assembled (SA) mercaptan monolayers on gold is a process in two stages. The adsorption to near completeness is very rapid. However, the process of orientation of the carbon chains, which is responsible for the blocking of electrochemical reactions takes much longer, as could be shown by ARXPS (angle resolved X-ray photo electron spectroscopy). Adsorption under potential control allows electrochemical experiments during the adsorption process as e.g. the measurement of the capacity of the electric double layer. Furthermore the control of the potential guarantees sure that the metal/liquid interface is well defined during the adsorption process.     

Adsorption of self-assembled monolayers of mercaptan on gold

XPS and AES are suitable techniques for studying organic monolayers on metals if radiation doses are kept low. The adsorption of self-assembled (SA) mercaptan monolayers on gold is a process in two stages. The adsorption to near completeness is very rapid. However, the process of orientation of the carbon chains, which is responsible for the blocking of electrochemical reactions takes much longer, as could be shown by ARXPS (angle resolved X-ray photo electron spectroscopy). Adsorption under potential control allows electrochemical experiments during the adsorption process as e.g. the measurement of the capacity of the electric double layer. Furthermore the control of the potential guarantees sure that the metal/liquid interface is well defined during the adsorption process.     

Blocking behavior of self-assembled monolayers on gold electrodes

Self-assembled monolayers (SAMs) with metal electrodes, especially thiols on gold, are the subject of this investigation because of the unique properties of SAM-modified surfaces. Normal alkanethiols are used to modify the surface of a conventional gold electrode to block certain ions such as Pb(II) and Cu(II) from the surface of the electrode. Normal alkanethiols are also used to study the SAM-gold interfacial adsorption-desorption behavior of the self-assembled monolayer. The effects of varying chain length of SAMs, varying concentration of the alkanethiol solutions, immersion time of the pure gold electrode in the SAM solution, and the stability of a SAM-modified gold electrode in fresh chloroform are investigated using the oxidation-reduction peaks of gold. Conditions that optimize the surface coverage and the uniformity of the SAMs have been determined. Normal alkanethiols proved to be a good insulator on the electrode surface. Received: 16 January 1997 / Accepted: 4 March 1997     

FTIR-ATR study of self-assembled thiol monolayers on gold

Self-assembled monolayers of 1-teradecanethiol on gold were characterized by means of FTIR-ATR measurements, XPS and contact angle measurements. Linear dichroism measurements using FTIR-ATR are used to estimate the orientation of the alkyl chains. An equation for calculating the orientation angles of the alkyls chains was deduced.     

Reactivity of acid fluoride-terminated self-assembled monolayers on gold

This report describes the reactivity of acid fluoride (AF)-terminated self-assembled monolayers (SAMs) on gold toward amine and alcohol compounds and the potentiality of AF as a reactive intermediate for surface functionalizations. The AF group was generated in situ on a gold surface by reacting the terminal carboxylic acid group in the SAM of 16-mercaptohexadecanoic acid with cyanuric fluoride and pyridine under the optimized conditions. AF was found to be highly reactive toward various amine groups, such as primary and secondary amines, but it did not react effectively with alcohol. In addition, the amide coupling reaction by microcontact printing (microCP) was compared with the solution-based reaction: when amine-derivatized ferrocene compound was used for 1-min microCP on the AF-activated surface, the surface coverage of the reaction product was about 83% of 3.45 x 1014 cm-2, the coverage obtained in the solution-based reaction. On the basis of the high reaction efficiency of microCP, the AF-activated surface was also used as a platform for patterning a biological ligand, biotin.     

Stability of self-assembled monolayers on titanium and gold

Methyl- and hydroxyl-terminated phosphonic acid self-assembled monolayers (SAMs) were coated on Ti from aqueous solution. Dodecyl phosphate and dodecyltrichlorosilane SAMs were also coated on Ti using solution-phase deposition. The stability of SAMs on Ti was investigated in Tris-buffered saline (TBS) at 37 degrees C using X-ray photoelectron spectroscopy, contact angle goniometry, and atomic force microscopy. For comparison purposes, a hydroxyl-terminated thiol SAM was coated on Au, and its stability was also investigated under similar conditions. In TBS, a significant proportion of phosphonic acid or phosphate molecules were desorbed from the Ti surface within 1 day, while the trichlorosilane SAM on Ti or thiol SAM on Au was stable for up to 7 days under similar conditions. The stability of hydroxyl-terminated phosphonic acid SAM coated Ti and thiol SAM coated Au was investigated in ambient air and ultraviolet (UV) light. In ambient air, the phosphonic acid SAM on Ti was stable for up to 14 days, while the thiol SAM on Au was not stable for 1 day. Under UV-radiation exposure, the alkyl chains of the phosphonic acid SAM were decomposed, leaving only the phosphonate groups on the Ti surface after 12 h. Under similar conditions, decomposition of alkyl chains of the thiol SAM was observed on the Au surface accompanied by oxidation of thiolates.     

A method for removing self-assembled monolayers on gold

Self-assembled monolayers (SAMs) have been widely used in studying interfacial phenomena, biological processes, electrochemistry, photoelectrochemistry, photoactivity and molecular interaction. Much research has been carried out in fabricating and removing SAMs on different substrates. In this work, we report for the first time, to our knowledge, that SAMs of thiolates on gold can be removed by immersing SAMs in 0.5 M NaBH 4 solution for 10 min. The procedure of removing thiolates was very convenient. Cyclic voltammetry, surface-enhanced Raman spectroscopy, and X-ray photoelectron spectroscopy were used to characterize this process. The results indicated that the SAMs of thiolates on gold can be removed efficiently by NaBH 4.