Capillary electrophoresis of seed 2S albumins from Lupinus species

Two modes of capillary electrophoresis (CE)--free-solution capillary zone electrophoresis (CZE) and sodium dodecyl sulfate capillary electrophoresis (SDS-CE) using a non-gel sieving matrix--have been developed for comparative analysis of low-molecular-mass 2S albumin isoforms from lupins. The albumin fraction and 2S albumins were separated in uncoated fused-silica capillary by CZE with 0.02 M phosphate buffer, pH 7.3, containing the sodium salt of phytic acid. The use of phytic acid (0.025 M) as buffer modifier and ion-pairing agent improved migration reproducibility, peak shape and separation efficiency. The reduced 2S albumins were separated by SDS-CE using a high concentration (0.3-0.5 M) mixture of tris(hydroxymethyl)aminomethane and borate buffers in uncoated fused-silica capillary. Of the various polymers used as non-gel sieving matrix, SDS-CE with a 10% dextran solution was found to be suitable for separation of 2S albumin polypeptides with molecular masses of 4,000-7,000 and 8,000-11,000. The addition of glycerol or ethylene glycol to the SDS separating buffer improved the resolution of polypeptides. The examined Lupinus species showed species-specific CZE and SDS-CE migration profiles of the 2S albumins.     

Effect of ionic strength, pH and polymer concentration on the separation of DNA fragments in the presence of electroosmotic flow

DNA separations in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions have been demonstrated. During the separations, PEO entered capillaries filled with Tris-borate (TB) free buffers by EOF and acted as sieving matrices. We have found that ionic strength and pH of polymer and free solutions affect the bulk EOF and resolution differently from that in capillary zone electrophoresis. The EOF coefficient increases with increasing ionic strength of the free TB buffers as a result of decreases in the adsorption of PEO molecules. In contrast, the bulk EOF decreases with increasing the ionic strength of polymer solutions using capillaries filled with high concentrations of free TB buffers. Although resolution values are high due to larger differential migration times between any two DNA fragments in a small bulk EOF using 10 mM TB buffers, use of a capillary filled with at least 100 mM TB free buffers is suggested for high-speed separations. On the side of PEO solutions, 1.5% PEO solutions prepared in 100 to 200 mM TB buffers are more proper in terms of resolution and speed. The separation of DNA markers V and VI was accomplished less than 29 min in 1.5% PEO solutions prepared in 100 mM TB buffers, pH 7.0 at 500 V/cm using a capillary filled with 10 mM free TB buffers, pH 7.0.     

Comparison of sieving matrices for on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments

Commercially available, replaceable sieving matrices and their solvent modulated forms were evaluated for use in on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments in capillary electrophoresis. The fragments were labeled with dyes that can be excited by the 488 nm line of an argon ion laser and have lifetimes in the range of 0.8 ns to 3.8 ns. The sieving matrices and buffer systems included poly(vinylpyrrolidone) (PVP), poly(ethyleneoxide) (PEO), hydroxyethylcellulose (HEC), Tris-borate-EDTA (TBE) and Tris-TAPS-EDTA buffers modified with DMSO and formamide. Selection of the optimal sieving matrix is based on the separation efficiency and the enhancement of lifetime resolution of DNA fragments. Best results for both electrophoretic resolution and lifetime detection were obtained using a poly(ethyleneoxide)/TBE gel buffer in the presence of 10% formamide.     

Comparison of sieving matrices for on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments

Commercially available, replaceable sieving matrices and their solvent modulated forms were evaluated for use in on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments in capillary electrophoresis. The fragments were labeled with dyes that can be excited by the 488 nm line of an argon ion laser and have lifetimes in the range of 0.8 ns to 3.8 ns. The sieving matrices and buffer systems included poly(vinylpyrrolidone) (PVP), poly(ethyleneoxide) (PEO), hydroxyethylcellulose (HEC), Tris-borate-EDTA (TBE) and Tris-TAPS-EDTA buffers modified with DMSO and formamide. Selection of the optimal sieving matrix is based on the separation efficiency and the enhancement of lifetime resolution of DNA fragments. Best results for both electrophoretic resolution and lifetime detection were obtained using a poly(ethyleneoxide)/TBE gel buffer in the presence of 10% formamide. Received: 25 August 2000 / Revised: 7 November 2000 / Accepted: 14 November 2000     

High-speed separation of proteins by microchip electrophoresis using a polyethylene glycol-coated plastic chip with a sodium dodecyl sulfate-linear polyacrylamide solution

In this paper, we describe a method for size-based electrophoretic separation of sodium dodecyl sulfate (SDS)-protein complexes on a polymethyl methacrylate (PMMA) microchip, using a separation buffer solution containing SDS and linear polyacrylamide as a sieving matrix. We developed optimum conditions under which protein separations can be performed, using polyethylene glycol (PEG)-coated polymer microchips and electrokinetic sample injection. We studied the performance of protein separations on the PEG-coated PMMA microchip. The electrophoretic separation of proteins (21.5-116.0 kDa) was completed with separation lengths of 3 mm, achieved within 8 s on the PEG-coated microchip. This high-speed method may be applied to protein separations over a large range of molecular weight, making the PEG-coated microchip approach applicable to high-speed proteome analysis systems.     

Effect of quasi‐interpenetrating network of polyacrylamide and poly(N,N‐dimethylacrylamide) on separation of dsDNA fragments and basic protein using CE

Quasi‐interpenetrating network (quasi‐IPN) of linear polyacrylamide (LPA) with low molecular mass and poly(N,N‐dimethylacrylamide) (PDMA), which is shown to uniquely combine the superior sieving ability of LPA with the coating ability of PDMA, has been synthesized for application in dsDNA and basic protein separation by CE. The performance of quasi‐IPN on dsDNA separation was determined by polymer concentration, electric field strength, LPA molecular masses and different acrylamide (AM) to N,N‐dimethylacrylamide (DMA) ratio. The results showed that all fragments in Φ×174/HaeIII digest were achieved with a 30 cm effective capillary length at –6 kV at an appropriate polymer solution concentration in bare silica capillaries. Furthermore, EOF measurement results showed that quasi‐IPN exhibited good capillary coating ability, via adsorption from aqueous solution, efficiently suppressing EOF. The effect of the buffer pH values on the separation of basic proteins was investigated in detail. The separation efficiencies and analysis reproducibility demonstrated the good potentiality of quasi‐IPN matrix for suppressing the adsorption of basic proteins onto the silica capillary wall. In addition, when quasi‐IPN was used both as sieving matrix and dynamic coating in bare silica capillaries, higher peak separation efficiencies, and better migration time reproducibility were obtained.     

Free solution capillary electrophoresis of proteins using untreated fused-silica capillaries.

Numerous efforts have been made to separate proteins by capillary zone electrophoresis (CZE). The most common optimization techniques are changing the pH of the running buffer, coating the capillary surface with a hydrophilic polymer, or using additives in the sample solution. Surface coatings and solution additives can reduce the adsorption of the protein onto the capillary surface, but they diminish the separation efficiency and the resolution of CZE. This paper reports the successful separation of proteins in a untreated fused-silica capillary by raising the pH of the running buffer and washing between runs with 1.0 M sodium hydroxide. Under these conditions, model proteins and proteins in human serum have been determined by CZE. It is shown that the results from CZE are compatible with those of sodium dodecyl sulphate-polyacrylamide gel electrophoresis.     

Development of an SDS‐gel electrophoresis method on SU‐8 microchips for protein separation with LIF detection: Application to the analysis of whey proteins

This work describes the development of an SDS‐gel electrophoresis method for the analysis of major whey proteins (α‐lactalbumin, β‐lactoglobulin, and BSA) carried out in SU‐8 microchips. The method uses a low‐viscosity solution of dextran as a sieving polymer. A commercial coating agent (EOTrol LN) was added to the separation buffer to control the EOF of the chips. The potential of this coating agent to prevent protein adsorption on the walls of the SU‐8 channels was also evaluated. Additionally, the fluorescence background of the SU‐8 material was studied to improve the sensitivity of the method. By selecting an excitation wavelength of 532 nm at which the background fluorescence remains low and by replacing the mercury arc lamp by a laser in the detection system, an LOD in the nanomolar range was achieved for proteins derivatized with the fluorogenic reagent Chromeo P540. Finally, the method was applied to the analysis of milk samples, demonstrating the potential of SU‐8 microchips for the analysis of proteins in complex food samples.     

Electrophoretic separation of DNA using a new matrix in uncoated capillaries

A new separation matrix, consisting of polymer poly(N-isopropylacrylamide) (PNIPAM) and small molecule additive mannitol, was used for double-stranded (ds) DNA and plasmid DNA separation by capillary electrophoresis. The matrix had a low viscosity, which made it very easy to handle. The additive mannitol dramatically enhanced the sieving performance of PNIPAM in TBE buffer. The optimal mannitol concentration 6% in polymer solution, was determined with the consideration of both speed and resolution. A resolution of 0.95 was achieved on the separation of 271/281 bp in the phiX174/HaeIII digest by using 1.5% PNIPAM + 6% mannitol, while the supercoiled, linear and nicked conformers of lambda plasmid were separated in 1% PNIPAM + 6% mannitol, demonstrating the potential use of this new matrix for effective DNA separations. The dramatic impact of mannitol on sieving performance of PNIPAM solution was investigated. pH dependent self-coating ability of PNIPAM was revealed. The presence of mannitol in TBE buffer decreased the pH of the buffer, which led to more efficient self-coating ability of PNIPAM probable due to the formation of hydrogen bonds between PNIPAM molecules and silanol groups at the silica wall.     

In‐capillary approach to eliminate SDS interferences in antibody analysis by capillary electrophoresis coupled to mass spectrometry

Capillary electrophoresis is an important technique for the characterization of monoclonal antibodies (mAbs), especially in the pharmaceutical context. However, identification is difficult as upscaling and hyphenation of used methods directly to mass spectrometry is often not possible due to separation medium components that are incompatible with MS detection. Here a CE‐MS method for the analysis of mAbs is presented analyzing SDS‐complexed samples. To obtain narrow and intensive peaks of SDS‐treated antibodies, an in‐capillary strategy was developed based on the co‐injection of positively charged surfactants and methanol as organic solvent. For samples containing 0.2% (v/v) of SDS, recovered MS peak intensities up to 97 and 95% were achieved using cetyltrimethylammonium bromide or benzalkonium chloride, respectively. Successful removal of SDS was shown in neutral coated capillaries but also in a capillary with a positively charged coating applying reversed polarity. The usefulness of this in‐capillary strategy was demonstrated also for other proteins and for antibodies dissolved in up to 10% v/v SDS solution, and in other SDS‐containing matrices, including the sieving matrix used in a standard CE‐SDS method and gel‐buffers applied in SDS‐PAGE methods. The developed CE‐MS approaches enable fast and reproducible characterization of SDS‐complexed antibodies.     

Genotyping of α-thalassemia deletions using multiplex polymerase chain reactions and gold nanoparticle-filled capillary electrophoresis

A gold nanoparticle-filled capillary electrophoresis method combined with three multiplex polymerase chain reactions (PCRs) was established for simultaneous diagnosis of five common α-thalassemia deletions, including the -α^3.7 deletion, -α^4.2 deletion, Southeast Asian (- -^SEA), Filipino (- -^FIL) and Thai (- -^THAI) deletions. Gold nanoparticles (GNPs) were used as a pseudostationary phase to improve the resolution between DNA fragments in a low-viscosity polymer. To achieve the best CE separation, several parameters were evaluated for optimizing the separation conditions, including the capillary coating, the concentrations of polymer sieving matrix, the sizes and concentrations of GNPs, the buffer concentrations, and the pH. The final CE method for separating a 200-base pair (bp) DNA ladder and α-thalassemia deletions used a DB-17 capillary, 0.6% poly(ethylene oxide) (PEO) prepared in a mixture of GNP_32nm solution and glycine buffer (25 mM, pH 9.0) (80:20, v/v) as the sieving matrix with 1 μM YO-PRO-1 for fluorescence detection; the applied voltage was −10 kV (detector at anode side) and the separation temperature was 25 °C. Under these optimal conditions, 15 DNA fragments with sizes ranging from 0.2 kb to 3.0 kb were resolved within 11.5 min. The RSDs of migration times were less than 2.81%. A total of 21 patients with α-thalassemia deletions were analyzed using this method, and all results showed good agreement with those obtained by gel electrophoresis.     

Separation of microorganisms using electromigration techniques

Like other colloidal particles bacteria have a surface charge that originates from the ionization of surface molecules and of the adsorption of ions from solution. Bacterial cell wall and membranes containing numerous proteins, lipid molecules, teichoic acids, lipopolisaccharides which give them characteristic charge. Therefore, bacterial cells undergo electrophoresis in a free solution with their own mobility depending on ionic strength and pH of buffer solution. Various electromigration techniques can be used to separate and determine the intact cells. Successful separation of five species of bacteria was obtained using a trimethylchlorosilane-modified capillary and a divinylbenzene-modified with suppressed EOF over a short distance (8.5 cm). The utilization of coated capillaries prevents adsorption of bacteria to the capillary wall. Another approach is utilization of a dilute dissolved polymer, polyethylene oxide (PEO) in the running buffer as a non-bonded coating for the purpose of altering the EOE These experiment have proved the possibility of diagnosing a variety of diseases and the ability to separate and identify viable cells.     

Evaluation of sieving matrices used to separate alleles by cycling temperature capillary electrophoresis

Denaturing CE (DCE) is a powerful tool for analysis of DNA variation. The development of commercial multi-CE instruments allows large-scale studies of DNA variation (many samples and many fragments). However, the cost of consumables like capillary arrays and sieving matrix might limit the use of DCE in such studies. Thus, we have tested 72 different in-house formulated sieving matrices' ability to suppress EOF and separate PCR-amplified alleles with the DCE variant, cycling temperature CE (CTCE). The data herein demonstrate that alleles can be baseline-separated by use of PVP and poly(N,N-dimethyl acrylamide) polymers at various percentages and pH. Allele separation by CTCE is matrix-independent and consequently applicable to any capillary instrument used for DNA separation. Formulation of sieving matrix for CTCE was done by dissolving appropriate amount of polymer powder into the running buffers. Allele separation was observed at different pH (7.5-8.5), concentrations and molecular size of the polymer, without compromising the separation and reproducibility. Finally, the cost reduction of homemade matrices is more than 1000-fold as compared to commercial sieving matrices.     

Dynamic adsorption of weakly interacting polymer/surfactant mixtures at the air/water interface

The dynamic adsorption of polymer/surfactant mixtures containing poly(ethylene oxide) (PEO) with either tetradecyltrimethylammonium bromide (C(14)TAB) or sodium dodecyl sulfate (SDS) has been studied at the expanding air/water interface created by an overflowing cylinder, which has a surface age of 0.1-1 s. The composition of the adsorption layer is obtained by a new approach that co-models data obtained from ellipsometry and only one isotopic contrast from neutron reflectometry (NR) without the need for any deuterated polymer. The precision and accuracy of the polymer surface excess obtained matches the levels achieved from NR measurements of different isotopic contrasts involving deuterated polymer, and requires much less neutron beamtime. The PEO concentration was fixed at 100 ppm and the electrolyte concentration at 0.1 M while the surfactant concentration was varied over three orders of magnitude. For both systems, at low bulk surfactant concentrations, adsorption of the polymer is diffusion-controlled while surfactant adsorption is under mixed kinetic/diffusion control. Adsorption of PEO is inhibited once the surfactant coverage exceeds 2 μmol m(-2). For PEO/C(14)TAB, polymer adsorption drops abruptly to zero over a narrow range of surfactant concentration. For PEO/SDS, inhibition of polymer adsorption is much more gradual, and a small amount remains adsorbed even at bulk surfactant concentrations above the cmc. The difference in behavior of the two mixtures is ascribed to favorable interactions between the PEO and SDS in the bulk solution and at the surface.     

Capillary sodium dodecyl sulfate-DALT electrophoresis with laser-induced fluorescence detection for size-based analysis of proteins in human colon cancer cells

Capillary sodium dodecyl sulfate (SDS)-DALT electrophoresis (SDS-DALT-CE) refers to CE separation of proteins based on their size; DALT is the abbreviation for Dalton, the unit used to describe molecular weight. In this work, seven proteins from 18 to 116 kDa were denatured by SDS, labeled by 3-(2-furoyl) quinoline-2-carboxaldehyde, separated by SDS-DALT-CE in polyethylene oxide sieving matrix, and detected by laser-induced fluorescence (LIF) in a sheath flow cuvette. This method was combined with detergent differential fractionation, which is a protein fractionation method using a series of detergent-containing buffers to sequentially extract protein fractions from cells, to analyze the proteins in HT29 human colon adenocarcinoma cells. In addition, on-column labeling was demonstrated for protein analysis by SDS-DALT-CE with LIF, and applied to analysis of proteins in a single HT29 cancer cell. Most proteins had molecular masses from 10 to 120 kDa. Similar protein profiles were obtained for single cells and protein extract of a large cell population.     

Dynamic light‐scattering measurement of sieving polymer solutions for protein separation on SDS CE

We evaluated the mesh size and homogeneity of polymer network by dynamic light scattering and discussed the relationship between the physical properties of polymer network and the protein separation behavior by capillary polymer electrophoresis. We compared three kinds of sieving polymers in solutions with a wide range of molecular weights and concentrations: polyacrylamide and polyethylene oxide as flexible polymers, and hydroxyethyl cellulose as a semiflexible polymer. We found that the mobility of protein was dominated primarily by the mesh size ξ, irrespective of the type of sieving polymers, and the peak spacing between protein peaks increased drastically in the range of ξ<10 nm, where the mobility also decreased. And the peak widths were dependent on the molecular species of sieving polymers and their homogeneity of polymer network. We proposed that a polymer network with a homogenous mesh size of less than 10 nm is the best sieving medium for separation of the proteins in the molecular weight range 14 300–97 200 Da from the view point of the resolution in protein separation.     

玻璃微流控芯片十二烷基硫酸钠无胶筛分电泳测定免疫球蛋白片段分子量

通过实验优化了葡聚糖筛分介质和运行缓冲溶液的浓度,采用十二烷基硫酸钠(SDS)无胶筛分电泳分离体系(10%(w/v)葡聚糖,0.1%SDS,10%甘油,0.2mol/LTris-硼砂,pH8.3的缓冲液)在自制的玻璃微流控芯片上高效分离了BODIPY衍生的蛋白质分子量标准样品,连续6次电泳所得迁移时间的相对标准偏差均小于0.50%。以6种蛋白质分子量的对数对其迁移时间作图,线性回归良好(r=0.994)。采用该芯片电泳分析体系对免疫球蛋白G不同片段的分子量进行了测定,所得结果与实际基本相符。     

Stacking of unlabeled sodium dodecyl sulfate-proteins within a fluorimetrically detected moving boundary, electroelution and mass spectrometric identification

The previously reported fluorimetric detection of sodium dodecyl sulfate (SDS)-protein in the presence of cascade blue in agarose gel electrophoresis using barbital buffer was found to be equally feasible in the absence of the fluorescent marker and using Tris-Tricinate buffer, provided that SDS was loaded with the sample but not contained in the catholyte. That fluorescent detection is thought to be due to the formation of a moving boundary between leading SDS and trailing barbital, or Tricinate buffer. This hypothesis is supported by the following evidence: (i) The fluorometrically detected band disappears with addition of SDS to the catholyte; (ii) band area is proportional to protein and/or SDS load; (iii) mobility of SDS-proteins differing in mass is the same at agarose concentrations up to 3%; (iv) lowering of protein mobility by increase in gel concentration and/or increase in the size of the SDS-protein leads to band disappearance. Fluorescent detection of the band is like to be nonspecific and due to the light scattering properties of a stack comprising moving boundaries of any analytes with net mobilities intermediate between SDS (or micellar SDS) and the trailing buffer constituent at their regulated very high concentrations. The steady-state stack of SDS-proteins in the size range of 14.4-45.0 kDa, and the transient stack of an SDS-protein of 66.2 kDa have lent themselves to electroelution and characterization by mass of the proteins after removal of SDS and buffer exchange using matrix assisted laser desorption/ionization-time of flight (MALDI-TOF)-mass spectrometry. The possibility to form a stack of protein between leading SDS and trailing buffer anions under conditions of weak molecular sieving (open-pore gel and small-sized protein) contributes to the understanding of moving boundaries in gel electrophoresis, but in view of the narrowly defined conditions, under which this stack forms, is of limited practical significance for the gel electrophoresis of SDS-proteins.     

Capillary electrophoresis of RNA in dilute and semidilute polymer solutions

We report separations of RNA molecules (281-6583 nucleotides) by capillary electrophoresis in dilute and semidilute solutions of aqueous hydroxyethylcellulose (HEC) ether in varying buffers. RNA mobility and peak band widths are examined under both nondenaturing and also denaturing conditions. From studies of sieving polymer concentration and chain length, it is found that good separations can be obtained in semidilute solutions as well as in dilute solutions. The dependence of RNA mobility on its chain length is consistent with separation by a similar to transient entanglement mechanism in dilute solutions. In semidilute entangled solutions the separation proceeds by segmental motion.     

DNA separation by capillary electrophoresis with hydrophilic substituted celluloses as coating and sieving polymers. Application to the analysis of genetically modified meals

A coating procedure based on the physical adsorption of hydroxypropyl cellulose onto the wall of a capillary column has been successfully used for the separation of DNA fragments up to 500 bp. The method uses a running Tris-phosphate-EDTA buffer containing 2-hydroxyethyl cellulose as sieving polymer. The separation procedure shows good reproducibility (measured as RSD%) for consecutive runs (<0.64), for different days (< 1.15) and capillaries (<2.15), short analysis times, and a long coating lifetime. Good reproducibility and efficiency are even achieved by performing the separation in the presence of additives such as ethidium bromide and mannitol. The method is applied to the detection of GMOs in soybean and maize meals with an accurate evaluation of the length of DNA sequences, previously amplified by polymerase chain reaction.