Pb2+ induced DNA conformational switch from hairpin to G-quadruplex: electrochemical detection of Pb2+

Conformational switch from hairpin DNA to G-quadruplex induced by Pb(2+) is studied by electrochemical impedance spectroscopy (EIS) in the presence of [Fe(CN)(6)](3-/4-) as the redox probe. In the presence of Pb(2+), the G-rich hairpin DNA opens the stem-loop and forms G-quadruplex structure, which gives rise to a sharp increase in the charge-transfer resistance (R(CT)) of the film reflected by the EIS. This structural change is also confirmed by circular dichroism (CD) measurements and UV-Vis spectroscopic analysis and calculated by density functional theory (DFT). On the basis of this, we develop a label-free electrochemical DNA biosensor for Pb(2+) detection. With increasing concentrations of Pb(2+), the differences in the charge-transfer resistance R(CT) before and after the Pb(2+) incubation is linearly dependent on the logarithm of Pb(2+) concentration within a range from 50 μM to 0.5 nM. The biosensor also exhibits good selectivity for Pb(2+) over other metal ions. This is a simple and label-free electrochemical method for Pb(2+) detection making use of the G-quadruplex.     

Effect of lead on the sorption of phenol onto montmorillonites and organo-montmorillonites

The effect of lead (Pb) on the sorption of phenol onto montmorillonite-based sorbents was studied using a batch equilibration method when phenol and Pb were sorbed simultaneously and either Pb or phenol was previously sorbed. The sorbents were Na(+)-, Ca(2+)-, hexadecyl trimethylammonium (HDTMA)-Na(+)-, and HDTMA-Ca(2+)-montmorillonites. Pb diminished the sorption of phenol largely onto Na(+)- or Ca(2+)-montmorillonites, while phenol had little effect on the sorption of Pb onto all sorbents. Pb had no effect on the sorption of phenol onto HDTMA-Na(+)- or HDTMA-Ca(2+)-montmorillonites either. The sorption capacity of phenol followed the order HDTMA-Na(+)- > HDTMA-Ca(2+)- > Na(+)- > Ca(2+)-montmorillonites. The pseudo-second-order equation described the kinetics of phenol sorption well. Sorption isotherms of phenol followed the Freundlich equation. Phenol sorption on HDTMA-Na(+)- and HDTMA-Ca(2+)-montmorillonites was linear, while that on Na(+)- and Ca(2+)-montmorillonites was nonlinear.     

Polymerized crystalline colloidal array chemical-sensing materials for detection of lead in body fluids

We have developed intelligent polymerized crystalline colloidal array (IPCCA) chemical-sensing materials for detection of Pb(2+) in high ionic-strength environments such as body fluids with a detection limit of <500 nmol L(-1) Pb(2+) (100 ppb). This IPCCA lead sensor consists of a mesoscopically periodic array of colloidal particles polymerized into an acrylamide hydrogel. The array Bragg-diffracts light in the visible spectral region because of the periodic spacing of the colloidal particles. This material also contains a crown ether chelating agent for Pb(2+). Chelation of Pb(2+) by the IPCCA in low-ionic-strength solutions results in a Donnan potential that swells the gel, which red-shifts the diffracted light in proportion to the Pb(2+) concentration. At high ionic strength the Donnan potential is, unfortunately, swamped and no static response occurs for these sensors. We demonstrate, however, that we can determine Pb(2+) at high ionic strength by incubating these IPCCA in a sample solution and then measuring their transient response on exposure to pure water. The non-complexed ions diffuse from the IPCCA faster than the bound Pb(2+). The resulting transient IPCCA diffraction red-shift is proportional to the concentration of Pb(2+) in the sample. These IPCCA sensors can thus be used as sensing materials in optrodes to determine Pb(2+) in high-ionic-strength solutions such as body fluids.     

Simple detection of trace Pb2+ by enrichment on cerium phosphate membrane filter coupled with color signaling

A Pb(2+) selective membrane filter was fabricated from the fibrous CeO(H(2)PO(4))(2).2H(2)O (CeP) crystals by blending with cellulose fiber. Enrichment of ppb level of Pb(2+) was achieved simply by filtration of aqueous sample solution through the membrane filter. Pb(2+) was strongly retained on the membrane filter by accommodation into the interlayer gallery of a CeP crystal. Visual detection of the enriched Pb(2+) was achieved by subsequent color signaling as PbS deposit upon treatment of the membrane filter with 3% Na(2)S solution. The analytical procedure and sample treatment conditions were optimized with respect to pH of the sample solution, filtration rate and masking of interfering ions. Detection of 20 ppb of Pb(2+) was not interfered by the presence of 1000-fold of Ca(2+), Mg(2+), and up to 100-fold of Fe(3+)and Cu(2+) by masking with 1 x 10(-3) mol dm(-3) of iminodiacetic acid (IDA). Most anions including phosphate (20 000 times) did not interfere with the determination of Pb(2+). The present simple method was applied to the determination of Pb(2+) in real samples like mine valley water.     

A thin-layer chromatography plate prepared from BODIPY-based receptor immobilized SiO2 nanoparticles as a portable chemosensor for Pb2+

A new fluorescence receptor based on BODIPY-immobilized silica nanoparticles (BODIPY-SiO(2)) exhibits a high affinity and selectivity for Pb(2+) over competing metal ions in water. An overall emission change of ca. 100-fold at the emission maximum was observed for Pb(2+). The fluorescence receptor BODIPY-SiO(2) can remove 97% and 95% of the initial 100 ppb Pb(2+) from human blood and waste solution, respectively. Experiments show the fluorescence receptor BODIPY-SiO(2) can be a potentially useful and effective agent for the selective separation and rapid removal of Pb(2+)in vivo. We also prepared a portable chemosensor kit by coating a 4 μm thick film of BODIPY-SiO(2) onto a glass substrate. We found that this BODIPY-SiO(2) film detects Pb(2+) ions at pH 7.4 with a sensitivity of 3.2 nM. Finally, we tested the effect of pH on BODIPY-SiO(2) with Pb(2+) ions between pH 3.0 and 11.0. The fluorescence changes of BODIPY-SiO(2) were almost constant between pH 3 and 11. The results imply that the BODIPY-SiO(2) film is applicable as a portable chemosensor for detection of Pb(2+) ions in the environmental field.     

Visual detection of lead(II) using a label-free DNA-based sensor and its immobilization within a monolithic hydrogel

Lead is highly toxic and its detection has attracted a lot of research interests. In recent years, DNA has been used for Pb(2+) recognition and many fluorescent sensors with low to sub-nM detection limits have been reported. These figures of merit were typically measured using a spectrophotometer that can detect nM DNA with a high signal-to-noise ratio. For visual detection, however, μM DNA or dye was required, making it difficult to detect low nM targets. We recently achieved a visual sensitivity of 10 nM Hg(2+) by immobilizing a DNA probe in a hydrogel. This was made possible because the gel was able to actively adsorb Hg(2+). In this work, we aim to test whether this method can be extended to the detection of Pb(2+). First, a new Pb(2+) sensor was designed based on a guanine-rich DNA and DNA binding dyes such as thiazole orange and SYBR Green I. The free DNA showed a detection limit of 8 nM Pb(2+) using 40 nM DNA. For visual detection in solution with 1 μM of the DNA probe, however, ～300 nM Pb(2+) was required. After immobilization in a monolithic polyacrylamide hydrogel, even 20 nM Pb(2+) could be visually detected with a sample volume of 50 mL. Therefore, sensitive detection without signal amplification was achieved. Finally, we demonstrated simultaneous detection of both Hg(2+) and Pb(2+) in the same water sample with shape encoded hydrogel sensors.     

Colorimetric filtrations of metal chelate precipitations for the quantitative determination of nickel(II) and lead(II)

A colorimetric filtration method has been developed for the highly selective and sensitive determination of Ni(2+) and Pb(2+) ions. Determinations of Ni(2+) and Pb(2+) follow the filtration using nioxime (1,2-cyclohexanedione dioxime) and rhodizonic acid disodium salt, respectively, as colorimetric reagents. Different from regular instrumentation techniques, the metal chelate precipitations are continuously pumped into a home-made flow cell at a constant flow rate, and filtered by a cellulose acetate/nitrate membrane. The color changes of the membrane are imaged using a conventional flatbed scanner, and digitized. The special selection of individual channels in the red, green, and blue channels of the images filters the influences of coexisting ions and provides a highly selective detection of Ni(2+) and Pb(2+) cations. The linear relationship between the colorimetric response of the chosen channel and Ni(2+) or Pb(2+) concentrations indicates a quantitative detection. The detection limit for Pb(2+) is 3 μM (almost half of the Chinese wastewater discharge standard concentration), and is well below the nM level (94 nM) for Ni(2+) (a quarter of the WHO drinking water safe-exposure standard for Ni(2+)). The determinations take five to ten minutes. No shelf life issue exists because the chelating indicators react with metal directly without any pre-immobilizations.     

Simultaneous detection of ultratrace lead and copper with gold nanoparticles patterned on carbon nanotube thin film

Highly sensitive detection of a Pb(2+)-Cu(2+) mixture using gold nanoparticles patterned on single-walled carbon nanotube (AuNP-SWCNT) film is reported. The gold nanoparticles were deposited electrochemically on carbon nanotube film using a cyclic voltammetry technique. The film showed a homogeneous size and density that could be easily controlled by the potential scanning cycle and gold precursor concentration. Square wave stripping voltammetry (SWSV) was applied to the simultaneous detection of Pb(2+) and Cu(2+) under optimized conditions. The AuNP-SWCNT electrode exhibited a high increase in sensitivity with a limit of detection of 0.546 ppb (R(2) = 0.984) and 0.613 ppb (R(2) = 0.991) for Pb(2+) and Cu(2+) ions, respectively, in a mixture of Pb(2+)-Cu(2+) solution (S/N = 3, n = 5), and a good linear response in the range from 3.31 ppb to 22.29 ppb. The electrode exhibited high reproducibility in repetitive measurements with a relative standard deviation as low as 4.2% and 2.6% for Pb(2+) and Cu(2+) ions, respectively. An interference study showed that Sb(3+), As(3+), Zn(2+), Ca(2+), and Na(+) ions did not have a significant effect. This study demonstrated an alternative approach to the rapid and reliable detection of heavy metals of environmental interest.     

Rhodamine-based chemosensing monolayers on glass as a facile fluorescent "turn-on" sensing film for selective detection of Pb2+

Rhodamine-based chemosensors 1 and 2 were synthesized and self-assembled onto glass surfaces for the selective fluorescent sensing of Pb(2+). The immobilized chemosensors showed fluorescent responses that were turned-on with Pb(2+) in CH(3)CN, selectively over various metal ions. The Pb(2+)-selective fluorescent switch of the immobilized chemosensors was also reversible, allowing for repeated use for Pb(2+) detection.     

Pb2+ as modulator of protein-membrane interactions

Lead is a potent environmental toxin that mimics the effects of divalent metal ions, such as zinc and calcium, in the context of specific molecular targets and signaling processes. The molecular mechanism of lead toxicity remains poorly understood. The objective of this work was to characterize the effect of Pb(2+) on the structure and membrane-binding properties of C2α. C2α is a peripheral membrane-binding domain of Protein Kinase Cα (PKCα), which is a well-documented molecular target of lead. Using NMR and isothermal titration calorimetry (ITC) techniques, we established that C2α binds Pb(2+) with higher affinity than its natural cofactor, Ca(2+). To gain insight into the coordination geometry of protein-bound Pb(2+), we determined the crystal structures of apo and Pb(2+)-bound C2α at 1.9 and 1.5 ? resolution, respectively. A comparison of these structures revealed that the metal-binding site is not preorganized and that rotation of the oxygen-donating side chains is required for the metal coordination to occur. Remarkably, we found that holodirected and hemidirected coordination geometries for the two Pb(2+) ions coexist within a single protein molecule. Using protein-to-membrane F?rster resonance energy transfer (FRET) spectroscopy, we demonstrated that Pb(2+) displaces Ca(2+) from C2α in the presence of lipid membranes through the high-affinity interaction with the membrane-unbound C2α. In addition, Pb(2+) associates with phosphatidylserine-containing membranes and thereby competes with C2α for the membrane-binding sites. This process can contribute to the inhibitory effect of Pb(2+) on the PKCα activity.     

Novel adsorbent based on silkworm chrysalides for removal of heavy metals from wastewaters

In this contribution, maximum capacity for adsorption of Pb(2+), Ni(2+), and Cu(2+) by silkworm chrysalides (SC) was determined. The raw silkworm chrysalides (SC(r)) and chrysalides after acidic washing (SC(w)) were used. Chitin (CT), extracted from SC, and chitosan (CS), with 85% deacetylation, were employed as reference samples. Adsorption tests showed that all the studied adsorbents exhibited excellent performance in removal of metals. The choice of a more appropriate adsorbent is related to its efficiency for removal of a specific metal. The studied materials presented different intensities for metal adsorption as follows: (i) Ni(2+)>Cu(2+)>Pb(2+) for SC(r); (ii) Pb(2+)>Cu(2+)>Ni(2+) for SC(w); (iii) Ni(2+)>Cu(2+)>Pb(2+) for CT; and (iv) Cu(2+)>Pb(2+)>Ni(2+) for CS. Metal adsorption onto SC(r) and CS was analyzed by Freundlich and Langmuir isotherm equations. Adsorption values for CS-Pb and SC(r)-Ni were provided by the Freundlich model, while the adsorption values for CS-Cu, CS-Ni, SC(r)-Pb, and SC(r)-Cu were provided by the Langmuir model. The studied adsorbents are suitable for use in treatment of wastewater. From the economic point of view, the use of SC(r) as an adsorbent of heavy metals (mainly Ni(2+)) on the large industrial scale would be more appropriate.     

Synthesis and characterization of electroactive ferrocene derivatives: ferrocenylimidazoquinazoline as a multichannel chemosensor selectively for Hg2+ and Pb2+ ions in an aqueous environment

The synthesis and characterization of ferrocene (Fc) derivatives 4-[2,5-diferrocenyl-4-(4-pyridyl)imidazolidin-1-ylmethyl]pyridine (1), ferrocenylmethylenepyridin-3-ylmethylamine (2), N,N'-bis(ferrocenylmethylene)-2,4,6-trimethylbenzene-1,3-diamine (3), and 6-ferrocenyl-5,6-dihydro[4,5]imidazo[1,2-c]quinazoline (4) have been described. Structures of 1, 2, and 4 have been determined by single-crystal X-ray diffraction analyses. At 25 °C, 1-3 are nonfluorescent, while 4 displays moderate fluorescence and chromogenic, fluorogenic, and electrochemical sensing selectively toward Hg(2+) and Pb(2+) ions. Association constants (K(a)) for Hg(2+) and Pb(2+) have been determined by the Benesi-Hildebrand method. Job's plot analysis supported 1:1 and 1:2 stoichiometries for Hg(2+) and Pb(2+) ions. Cyclic voltammograms of 1-4 exhibited reversible waves corresponding to a ferrocene/ferrocenium couple. The wave associated with 4 (+0.0263 V) exhibited positive (ΔE(pa) = 0.136 V) and negative (ΔE(pa) = 0.025 V) shifts in the presence of Hg(2+) and Pb(2+) ions, respectively. The mode of interaction between metal ions and 4 has been supported by (1)H NMR spectroscopy and mass spectrometry studies and verified by theoretical studies. It presents the first report dealing with ferrocene-substituted quinazoline as a multichannel chemosensor for Hg(2+)/Pb(2+) ions.     

Existence of doubly charged lead monohydrate: experimental evidence and theoretical examination

Despite reports to the contrary, doubly charged lead monohydrate is a stable species against both proton and charge transfers. [Pb(H(2)O)](2+) has been observed as a minor product in the ligand-exchange reaction of [Pb(CH(3)CN)](2+) with H(2)O after collisional activation. Density functional theory has been used to examine reaction profiles of [Pb(H(2)O)(n)](2+) where n = 1, 2, and 3.     

A lead-filled G-quadruplex: insight into the G-Quartet's selectivity for Pb(2+) over K(+)

The lipophilic nucleoside, G 1, extracts Pb(2+) picrate from water into organic solvents to give structures based on the hydrogen-bonded G-quartet. Crystal structures indicate important differences between (G 1)(8)-Pb(2+) and (G 1)(8)-K(+). The divalent Pb(2+) templates a smaller G(8) cage than does K(+), as judged by the M-O6 bond length, O6-O6 diagonal distance, and inter-tetramer separation. The more compact Pb(2+) octamer correlates with NMR data indicating that N2-N7 hydrogen bonds in (G 1)(8)-Pb(2+) are kinetically more stable than in (G 1)(8)-K(+).     

Metal ion-modulated graphene-DNAzyme interactions: design of a nanoprobe for fluorescent detection of lead(II) ions with high sensitivity, selectivity and tunable dynamic range

We investigate interactions between graphene oxide and a Pb(2+)-dependent DNAzyme, based on which a Pb(2+) sensor with high sensitivity, selectivity and tunable dynamic range is developed.     

Effects of Pb2+ on energy distribution and photochemical activity of spinach chloroplast

Lead (Pb(2+)) is a well-known highly toxic element. The mechanisms of the Pb(2+) toxicity are not well understood for photosynthesis. In this paper, we reported the effect of Pb(2+) on light absorption, distribution and conversion of spinach chloroplast by spectroscopy, and photochemical reaction activities. Several effects of Pb(2+) were observed: (1) the absorption peak intensity of chloroplast obviously decreased in red and blue region and produced optical flattering; (2) fluorescence quantum yield nearby 680 nm of chloroplast greatly declined; (3) the excitation band nearby 440 nm of chloroplast significantly descended; (4) Pb(2+) treatments reduced of the rate of whole chain electron transport, photochemical activities of PSII DCPIP photoreduction and oxygen evolution, but the photoreduction activities of PSI were little changed. Together, the studies of the experiments showed that Pb(2+) decreased absorption of light on spinach chloroplast and inhibited excitation energy to be absorbed by LHCII and transferred to PSII, then reduced the conversion from light energy to electron energy, and decelerated electron transport, water photolysis and oxygen evolution.     

Understanding lead chemistry from topological insights: the transition between holo- and hemidirected structures within the [Pb(CO)n]2+ model series

In this contribution, we focus to the currently unknown [Pb(CO)(n)](2+) model series (n=1 to 10), a set of compounds which allows us to investigate in-depth the holo- and hemidirectional character that lead complexes can exhibit. By means of DFT computations performed using either relativistic four-component formalisms coupled to all-electron basis sets for [Pb(CO)](2+), [Pb(OC)](2+) and [Pb(CO)(2)](2+), or scalar relativistic pseudopotentials for higher n values, the structure and the energetics of these species are investigated. The results are complemented by Constrained Space Orbital Variations (CSOV) and Electron Localization Function (ELF) comprehensive analyses in order to get better insights into the poorly documented chemical fundamentals of the Pb(2+) cation. Whereas the discrimination between holo- and hemidirected structures is usually done according to the geometry, we here provide a quantitative indicator grounded on (V(Pb)), the mean charge density of the valence monosynaptic V(Pb) ELFic basin associated to the metal cation. Free-enthalpy relying discussions show, moreover, that those gas-phase complexes having n=7, 8 or 9 may be experimentally instable and should dissociate into [Pb(CO)(6)](2+) and a number of CO ligands. According to second-order differences in energy, it is anticipated that the n=3 or 6 structures should be the most probable structures in the gas phase. Gathering all data from the present theoretical study allows us to propose some concepts that the versatile structural chemistry of Pb(2+) complexes could rely on.     

Highly sensitive determination of cadmium and lead using a low-cost electrochemical flow-through cell based on a carbon paste electrode

A low-cost thin-layer electrochemical flow-through cell based on a carbon paste electrode (CPE), was constructed for the highly sensitive determination of cadmium(II) (Cd(2+)) and lead(II) (Pb(2+)) ions. The sensitivity of the proposed cell for Cd(2+) and Pb(2+) ion detection was improved by using the smallest channel height without the need for any complicated electrode modification. Under the optimum conditions, the detection limits of Cd(2+) and Pb(2+) ions (0.08 and 0.07 μg dm(-3), respectively) were 13.8- and 11.4-fold lower than that of a commercial flow cell (1.1 and 0.8 μg dm(-3), respectively). Moreover, the percentage recoveries of Cd(2+) and Pb(2+) for the in-house designed thin-layer flow cell were higher than those for the commercially available cell in all tested water samples, and within the acceptable range. The proposed flow cell is promising as an inexpensive and alternative one for the highly sensitive monitoring of heavy metal ions.     

Gold nanorods-based FRET assay for sensitive detection of Pb2+ using 8-17DNAzyme

In this paper, we have reported a sensitive assay for fluorescence "turn-on" detection of Pb(2+) in aqueous solutions based on FRET between gold nanorods (GNRs) and the FAM-labeled substrate strand of 8-17DNAzyme. The fluorescence of the FAM-labeled substrate strand is quenched when 8-17DNAzyme is adsorbed on GNRs surface through electrostatic interaction. In the presence of lead ions, the fluorescence is restored due to the decrease of FRET efficiency caused by the specific cleavage of the FAM-labeled substrate strand by the enzyme, which weakens the electrostatic interaction between the GNRs and short FAM-labeled DNA fragment. The interference of eleven common metal ions has been tested, indicating that Pb(2+) can be selectively detected. This method exhibits a high sensitivity for Pb(2+) with a detection limit of 61.8 pM and a linear range from 0.1 nM to 100 nM. It is a simple, sensitive, and selective method for Pb(2+) detection. Moreover, this sensing system obtained satisfying results for Pb(2+) detection in tap water samples.     

Interdependence of Anion and Cation Exchanges in Calcium Hydroxyapatite: Pb(2+) and Cl(-)

The ion exchange of Pb(2+) and Cl(-) into calcium hydroxyapatite from aqueous solutions is studied at 293 K. Although the exchange of Cl(-) into CaHAp and PbHAp was not observed, in the presence of both Pb(2+) and Cl(-) in aqueous solution the exchange of both Pb(2+) and Cl(-) into CaHAp occurred, and, at least at intermediate concentrations of HCl, a proportionality between the sorbed quantities of these two ions was observed. The dissolution of CaHAp is shown to be dependent upon the pH, while the quantity of Pb(2+) exchanged into the solid is not a function of the proton content; consequently, the exchange is not primarily a dissolution-precipitation process. Copyright 1999 Academic Press.