气固相法合成的Ti-ZSM-5催化剂上苯乙烯氧化反应的宏观动力学

 采用TiCl4气固相同晶取代法制得的Ti－ZSM－5作催化剂,对H2O2氧化苯乙烯反应的宏观动力学进行了研究,考察了催化剂、苯乙烯和H2O2用量及反应温度对苯乙烯氧化反应速率的影响．结果表明,催化剂Ti－ZSM－5和底物苯乙烯对苯乙烯氧化反应速率的贡献均为一级,而H2O2为1／2级;苯乙烯氧化反应的表观活化能Ea＝48．14kJ／mol．当以丙酮为溶剂,在n（PhCH∶CH2）／n（H2O2）＝7．91,催化剂用量为20g／L,反应温度为343K的条件下,反应360min时,苯乙醛选择性和H2O2利用率分别可达91．9％和88．6％．     

Fe/MnO-ZnZSM-5双功能催化剂上合成气直接转化为芳烃的反应

 探讨了Fe／MnO－ZnZSM－5（n（SiO2）／n（Al2O3）＝50）双功能催化剂上合成气直接转化为芳烃的反应，考察了反应温度和Zn载量对CO转化率及芳烃选择性的影响．结果表明，Fe／MnO－ZnZSM－5具有良好的合成气芳构化性能，在V（CO）∶V（H2）∶V（Ar）＝3∶6∶1，SV＝1600h－1，p＝1．1MPa，T＝543K的条件下，CO转化率可达到98．1％，芳烃产物选择性可高达53．1％．催化剂经60h运转后，CO转化率仅降低0．5％，显示了良好的稳定性和应用前景．     

乙烯直接氧化制乙酸的研究Ⅱ．助剂对Pd－Se／H4SiW12O40／SiO2催化性能的影响

 研究了不同助剂促进的负载型Pd－Se／H4SiW12O40／SiO2催化剂对乙烯直接氧化制乙酸反应的影响．采用固定床微反装置评价了催化剂的性能，并采用C2H4和O2吸附量测定、吸附C2H4的TPD－MS和TPSR－MS等技术对催化剂进行了表征．结果表明，以SiO2为载体，以硅钨酸为助剂，Pd－Se－Na－Ru组成的催化剂体系其催化性能比文献报道的结果明显提高．在原料气配比n（C2H4）∶n（N2）∶n（O2）∶n（H2O）＝55∶14∶9∶22，反应物空速GHSV＝3844h－1，反应压力p＝1．4MPa，反应温度θ＝155℃条件下，乙烯的转化率和乙酸的选择性分别为8．0％和87．4％，乙酸的单程时空产率达372．0g／（L·h）．吸附量测定表明，吸附在催化剂表面上的C2H4／O2比值高对于提高乙酸的选择性是有利的．     

硒催化CO/H2O选择性还原间二硝基苯制间硝基苯胺

 采用硒作催化剂,乙酸钠为助催化剂,用CO/H2O对间二硝基苯进行部分还原制备了间硝基苯胺. 考察了时间、CO压力、温度、催化剂用量、溶剂和水量等因素对反应的影响. 以四氢呋喃作溶剂,使用摩尔量为间二硝基苯20倍的水和4%的硒,在160 ℃和CO压力1 MPa下反应3 h,间二硝基苯转化率可达100%,间硝基苯胺的选择性和收率均为95.7%.     

Mo／La－Co－O催化剂上甲烷选择氧化制甲醇反应

 制备了一系列Mo／La－Co－O催化剂，考察了催化剂对甲烷选择氧化制甲醇反应的催化性能，并用BET，XRD，LRS，H2－TPR和XPS等技术研究了催化剂的结构和性质．结果表明，在n（CH4）∶n（O2）∶n（N2）＝10∶1∶1，SV＝14．4L／（g·h），p＝4．2MPa和θ＝420℃的反应条件下，7％Mo／La－Co－O催化剂表现出较好的催化性能，甲醇选择性为60％，甲醇收率为6．7％．Mo负载于La－Co－O上以后，Mo－O物种以无定形的状态存在于La－Co－O表面，并与La－Co－O发生相互作用．Mo的负载量影响Mo－O物种的结构及催化剂的性质．催化剂的还原性和表面O－／O2－比影响催化剂上甲烷选择氧化制甲醇反应的性能．     

K2O助剂对合成碳酸二甲酯用Cu/Ni/ZrO2-SiO2催化剂的吸附和催化性能的影响

 用等体积浸渍法制备了ZrO2－SiO2（ZrSiO）表面复合氧化物负载的Cu－Ni催化剂,并用IR,TPR,TPD及微反技术考察了K2O助剂对CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上的吸附及合成碳酸二甲酯（DMC）反应性能的影响．结果表明：加入K2O助剂使CO2在催化剂表面上的吸附增强,当n（K）／n（Cu＋Ni）＝15％时,CO2在催化剂表面上吸附后生成K2CO3;CH3OH在催化剂表面上的解离吸附态（CH3O－和H＋）的吸附减弱;CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上反应的主要产物为DMC,H2O,CO和CH2O;随着K2O助剂的加入,反应转化率及DMC选择性提高,副产物（CO和CH2O）的选择性下降．根据实验结果,探讨了K2O对催化剂表面活性中心电荷分布的影响．     

温控相分离催化三聚丙烯氢甲酰化反应的研究

 首次将温控相分离催化概念应用于三聚丙烯氢甲酰化反应中．系统研究了各种反应条件对三聚丙烯氢甲酰化反应的影响，考察了催化剂的循环使用效果．以RhCl3·3H2O为催化剂前体，以P［p－C6H4O（CH2CH2O）nH］3为配体，在V（H2）／V（CO）＝1，p＝6MPa，θ＝130℃的反应条件下，三聚丙烯氢甲酰化反应的转化率和醛收率可分别达到76．3％和72．1％．催化剂循环使用三次，仍有较高的催化活性．     

正丁烷氧化制顺酐流化床催化剂的性能

 考察了前驱体制备过程中水合肼／五氧化二钒摩尔比（以下简记\r\n为n（N2H4）／n（V2O5））对催化剂性能的影响．由较高的n（N2H4）\r\n／n（V2O5）比制得的催化剂，其（VO）2P2O7相含量较多，正丁烷转化\r\n率较高．随着n（N2H4）／n（V2O5）比的减小，δ－VOPO4相的含量逐\r\n渐增多，正丁烷转化率随之升高；而顺酐选择性开始时升高，达到最大\r\n值后逐渐降低．在n（N2H4）／n（V2O5）＝0．34时制备的催化剂最佳\r\n，在丁烷浓度为4．0％、空速为500h－1及反应温度为420℃的反应条件\r\n下，顺酐收率可达49．74％．本文中细粒床催化剂有较大的操作弹性．     

Fe－Mn催化剂对F－T合成反应的催化性能Ⅰ．初期反应性能

 在固定床积分反应器中，对Fe－Mn催化剂上F－T合成反应的初期反应性能进行了一系列条件实验，考察了在不同温度、压力、原料气H2／CO比和空速下催化剂的催化性能．结果表明，该催化剂运行200h后，仍显示出较高的催化活性和稳定性，对低碳烯烃和C5＋烃具有较高的选择性，且C5＋烃的时空收率较高．在n（H2）／n（CO）＝1，GHSV＝6000h－1，p＝2．02MPa和θ＝300℃的条件下，CO转化率可达74．1％，总有效烃（C＝2～4＋C5＋）的选择性可达88．6％，甲烷选择性为6．7％，C5＋烃的时空收率为0．54g／（ml·h）．     

异戊二烯催化脱氢环氧化的研究

 合成了钼－乙酰丙酮配合物，并进行了表征，确定了其组成为M\r\noO2（acac）2．以MoO2（acac）2为催化剂，以过氧化氢为氧化剂，对\r\n异戊二烯一步脱氢环氧化制3－甲基呋喃反应进行了研究．考察了反应\r\n条件（催化剂用量、反应底物之比、温度、时间、溶剂和助剂等）对该\r\n反应的影响．结果表明，在n（cat）∶n（CH2∶C（CH3）CH∶CH2）∶\r\nn（H2O2）＝1∶100∶100，θ＝40℃，t＝6h的反应条件下，异戊二烯\r\n转化率为70．8％，3－甲基呋喃选择性为54．8％．提出了异戊二烯脱\r\n氢环氧化可能的反应机理．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.