An efficient and chemoselective Brønsted acidic ionic liquid-catalyzed N-Boc protection of amines

The first report of a Brønsted acidic ionic liquid, 1-methylimidazolium tetrafluoroborate [(HMIm)BF₄], catalyzed efficient and chemoselective N-Boc protection of various amines using (Boc)₂O is presented. Optically pure amino alcohols and amino acid esters were converted efficiently to their corresponding optically pure N-Boc derivatives. The reported method is mild, solvent-free and has the advantages of both homogeneous and heterogeneous catalysis with high product yields, selectivity and ease of product separation.     

Facile protection of carbonyl compounds as oxathiolanes and transoxathioacetalization of oxyacetals promoted by iron(III) trifluoroacetate or trifluoromethanesulfonate as chemoselective and recyclable catalysts

Oxathioacetalization of carbonyl compounds and transoxathioacetalization of O,O-acetals/ketals are reported under nearly neutral conditions promoted by iron(III) trifluoroacetate [Fe(CF₃CO₂)₃] or trifluoromethanesulfonate [Fe(CF₃SO₃)₃] as recyclable and highly efficient Lewis acid catalysts.     

An expeditious, efficient green methodology for the Boc protection of amines and silyl protection of alcohols over tungstophosphoric acid-doped mesoporous silica

An efficient, chemoselective and eco-friendly protocol for the protection of amines as N-tert-butylcarbamate using (Boc)₂O and protection of alcohols as silyl ether using HMDS over tungstophosphoric acid/SBA15 has been developed. Solventless condition, easy work-up, short reaction time, excellent yields and reusability of the catalyst are the striking features of this methodology which can be considered to be one of the better methods for the protection of amines and alcohols.     

Protic ionic liquid [TMG][Ac] as an efficient,homogeneous and recyclable catalyst for Boc protection of amines

An efficient and practical protocol for the chemoselective N-Boc protection of various structurally different aryl, aliphatic and heterocyclic amines was carried out with (Boc)₂O using protic 1, 1, 3, 3-tetra-methylguanidinium acetate (10 mol%) as recyclable catalyst under solvent free condition at ambient temperature. No competitive side reactions (isocyanate, urea and N, N-di-Boc) were observed. α-Amino alcohols afforded the N-Boc-derivative without oxazolidinone formation.     

Chemoselective protection of thiols versus alcohols and phenols. The Tosvinyl group

The conjugate addition of aliphatic and aromatic thiols to ethynyl p-tolyl sulphone (tosylacetylene) has been managed to afford Tosvinyl derivatives chemoselectively (in the presence of oxygen nucleophiles) and stereoselectively (isomers Z) in practically quantitative yields. The conditions of choice are: catalytic amounts of Et₃N (only 0.5-1.0 mol%), a reaction temperature around 0°C and, for the less acidic thiols, CF₃CH₂OH or CH₃CN/CF₃CH₂OH as the solvent. Thus, N-Boc-Cys-OMe has been quantitatively protected as its S-Tosvinyl derivative in the presence of N-Boc-Ser-OMe and N-Boc-Tyr-OMe. This novel protecting group is stable to several basic and acidic conditions; its removal is achieved at rt by treatment with an excess of pyrrolidine or at 0°C with alkanethiolate ions.     

Nano-ferrous ferric oxide (nano-Fe3O4): Powerful,reusable, and stable catalyst for N-Boc protection of amines

Nano-ferrous ferric oxide (nano-Fe₃O₄) efficiently catalyzed N-boc protection of amines in high yields and acceptable reaction times. Nano-Fe₃O₄ was applied as an efficient, green, heterogeneous and reusable magnetite catalyst. Clean reaction, simple purification, short reaction time and high yield were some other advantages of this compound.     

Experimental and theoretical studies of acridine orange as corrosion inhibitor for copper protection in acidic media

The corrosion process commonly limits the use of copper in practical applications. The use of corrosion inhibitors is one of the effective methods to reduce the corrosion rate of copper. In this research, the inhibition effect of acridine orange (3,6-bis(dimethylamine)acridine) (AcO) for the protection of copper in 0.5 ?M ?H₂SO₄ solution was studied. For this aim, the change of open circuit potential with exposure time (E_ocp-t), electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), anodic and cathodic potentiodynamic polarization measurements (PP) and chronoamperometry (CA) techniques were used. Some quantum chemical parameters (E_HOMO, E_LUMO and dipole moment) were calculated and discussed. The AcO film formed over the copper surface was examined by SEM, EDX, AFM and contact angle measurements. The electrochemical data showed that AcO is an effective corrosion inhibitor even at low concentrations (ranging between 99.1% and %99.4 ?at concentrations from 0.01 ?mM to 1 ?mM). The corrosion rate of copper decreases in the presence of the inhibitor by reducing both anodic and cathodic rates, which is depended on its concentration. This compound behaves as mixed-type corrosion inhibitors with predominantly cathodic type. Its adsorption on the copper surface obeys Langmuir adsorption isotherm. The value of adsorption equilibrium constant (K_ads) and the standard free energy of adsorption were ΔG_ads 1.298 x 10³ ?M^?1 and -27.71 ?kJ/mol in the case of 0.5 ?M ?H₂SO₄ solution containing 1.0 ?mM AcO, which shows the adsorption is high and spontaneous. The adsorbed inhibitor film over the metal increase contact angle of the surface, which suggests the more hydrophobic properties of the surface are increasing coming from the orientation of hydrophobic sites to the electrolyte. The zero charge potential (E_pzc) studies showed that the surface charge of the metal is positive in the corrosive media containing the inhibitor. Quantum chemical calculations showed that the binding of inhibitor molecules to the metal surface takes place through N atoms of the inhibitor.     

Efficient, solventless N-Boc protection of amines carried out at room temperature using sulfamic acid as recyclable catalyst

A simple, rapid, and efficient protocol for the chemoselective N-Boc protection of amines using sulfamic acid as catalyst is described. N-Boc protection of various structurally diverse aliphatic, aromatic, alicyclic, and heterocyclic amines (1°, 2°, 3°) was carried out with (Boc)₂O using sulfamic acid as catalyst (5 mol %) at room temperature under solventless conditions. The advantages of this method are simplicity, shorter reaction times (1-15 min), a cost-effective catalyst, and excellent isolated yields (90-100%); it is also environmentally benign. Moreover, the combined use of ultrasound and sulfamic acid achieves a synergic effect that is especially marked in the N-Boc protection of deactivated (sterically hindered and electron-deficient) amines. The catalyst possesses distinct advantages: ease of handling, cleaner reactions, high activity, and excellent chemoselectivity.     

One-pot synthesis of N-alkyl purine and pyrimidine derivatives from alcohols using TsIm: a rapid entry into carboacyclic nucleoside synthesis

A convenient and efficient one-pot N-alkylation of nucleobases from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, treatment of alcohols with a mixture of purine or pyrimidine nucleobase, TsIm, K₂CO₃, and triethylamine in refluxing DMF regioselectively furnishes the corresponding N-alkyl nucleobases in good yields. This methodology is highly efficient for various structurally diverse primary alcohols.     

Facile construction of a water-defendable Li anode protection enables rechargeable Li-O2 battery operating in humid atmosphere

The rechargeable Li-O₂ battery endowed with high theoretical specific energy density has sparked intense research interest as a promising energy storage system. However, the intrinsic high activity of Li anode, especially to moisture, usually leads to inferior electrochemical performance of Li-O₂ battery in humid environments, hindering its widespread application. To settle the trouble of poor moisture tolerance, fabricating a water-proof layer on the Li-metal anode could be an effective tactic. Herein, a facile strategy for constructing an ibuprofen-based protective layer on the Li anode has been proposed to realize highly rechargeable Li-O₂ battery in humid atmosphere. Due to the in-situ reaction between ibuprofen reagent and metallic Li, the protective layer with a thickness of ∼30 µm has been uniformly deposited on the surface of Li anode. Particularly, the protective layer, consisting of a large amount of hydrophobic alkyl group and benzene ring, can significantly resist water ingress and enhance the electrochemical stability of Li anode. As a result, the Li-O₂ battery based on the protected Li anode achieves a long cycle life of 210 h (21 cycles at 1000 mAh/g, 200 mA/g) in highly moist atmosphere with relative humidity (RH) of 68%. This convenient and efficient strategy offers novel design concept of water-resistant metal anode, and paves the way to the promising future prospect for the high-energy Li-O₂ battery implementing in the ambient atmosphere.     

An efficient and economical synthesis of 5-substituted 1H-tetrazoles via Pb(II) salt catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple, mild and efficient method is developed for the synthesis of 5-substituted 1H-tetrazoles. Out of three used Pb(II) catalysts, lead chloride (PbCl₂) has been found to be an efficient catalyst for [3+2] cycloaddition of NaN₃ with aromatic and aliphatic nitriles to afford 5-substituted 1H-tetrazoles. The catalyst is reusable up to four cycles with consistent activity. The cost effectiveness and easy availability of the catalyst, simple methodology, excellent yield and easy work-up are the additional advantages.     

Synthesis of azido arylselenides and azido aryldiselenides: a new class of selenium-nitrogen compounds

We present here our results of the efficient synthesis of azido arylselenides and azido aryldiselenides under mild conditions. Starting from nitrogen-substituted benzenes, we incorporated selenium atom at aromatic ring and obtained amino arylselenides and diselenides in satisfactory yields. Treatment of these compounds with iso-pentyl nitrite (i-C₅H₁₁ONO) and azido trimethylsilane (Me₃SiN₃) in THF affords a variety of azido arylselenides and diselenides in good to excellent yields.     

4,5-Dicyanoimidazole-promoted synthesis of dinucleoside polyphosphates and their analogs

A general and efficient P(V)–N activation method for the preparation of symmetrical and asymmetrical dinucleoside polyphosphates (Np_nN′s, n=2–4) and P²,P³-CX₂-dinucleoside tetraphosphates (X=H, F, and Cl) has been established. Twenty-two dinucleoside polyphosphates and their phosphonate analogs were synthesized from nucleoside 5′-phosphoropiperidates with 4,5-dicyanoimidazole as the activator in good to high yields.     

N-Phenanthroline glycosylamines: synthesis and copper(II) complexes

A series of novel N-(1,10-phenanthrolin-5-yl)-β-glycopyranosylamines was obtained with excellent stereoselectivity and synthetically useful yields by treatment of 5-amino-1,10-phenanthroline with different unprotected monosaccharides, using (NH₄)₂SO₄ as an efficient promoter. Copper(II) complexes having a 2:1 mole ratio of the bidentate ligand phenanthroline N-glycoside and the metal were also prepared.     

Energy dependence of the S1 -decay of propynal and propynal-d1 and the influence of collisions

The collision-free lifetime and the quenching rate of S₁(¹A″) vibrational levels of propynal and propynal-d₁ have been measured in the pressure range O.1-1OmTorr at room temperature. The collision-free decay of propynal is dominated by internal conversion that of propynal-d₁ by fluorescence. In both molecules the internal conversion rate is dependent on specific vibrational modes, in particular of the most efficient promoting mode v₁₀[CH(ald) wagging mode]. The intersystem crossing process of propynal, inefficient at the vibrationless S_1, level, remains unimportant at least up to an excess energy ≈ 3000 cm^-1. The quenching of the fluorescence is due to a very efficient collision-induced intersystem crossing (130 <σ_ISC^cl ? 600 A²). The strongly varying rates of this process, apparently dependent on the vibronic level, have been measured with propynal (propynal-d₁), argon, and butane as collision partners.     

Nanocrystalline TiO2-HClO4:A novel,efficient and recyclable catalyst for the chemoselective N-Boc protection of amines under solvent-free conditions

Nanocrystalline TiO₂-HClO₄,as newly reported catalyst,has been used as an efficient and reusable catalyst for the chemoselective N-Boc protection of amines.The clean,mild acidity condition, quantitative yields of products,short reaction time and low reaction temperature are attractive features of this reaction.In practice,this method is a combination of a satisfactory synthesis and more significantly easy product isolation and purification.     

Conversion of lactides into ethyl lactates and value-added products

This Letter describes an attractive and efficient method for Mg(OR)₂-mediated lactide alcoholysis. The catalysts were generated in situ from di-n-butylmagnesium and ROH to prevent aggregation of Mg(OR)₂. The reaction of ROH [R = Me, Et, RCO₂(Me)CH] with lactide initially yielded the ring-opened product HO[CH(CH₃)CO]_nOR (n = 2 or 3). The complete consumption of lactide caused the reaction to proceed further, giving environmentally friendly lactic acid esters in excellent yields under ambient conditions.     

Radiation postpolymerization in devitrifying matrices: Different polymerization activity of acrylic and methacrylic monomers

Investigation of the effect of the α-CH₃-group on low-temperature postpolymerization in devitrifying matrices leads to the following conclusions. 1. The low-temperature postpolymerization in supercooled alcohol solutions (T_g ～ 102 K) is quite efficient with acrylic monomers. Inactivity of their methacrylic analogues under these conditions is attributed to steric screening of the unpaired electron in the growing radicals. 2. As the temperature is raised and the CH₃-group vibration intensity increases, the screening effect fades. Thus in devitrifying water-alcohol solutions of NaAA and NaMAA, at higher temperatures the postpolymerization is efficient in both cases. Data on copolymerization of NaAA and NaMAA indicate that at ～ 170 K the steric limitations due to the CH₃-group are eliminated. 3. In a glycerine matrix ($\text{T}{}_{\mathrm{g}}\text{? 195 K}$), all the acrylic and methacrylic monomers studied show efficient polymerization over virtually the same temperature range. It is concluded that the a-CH₃-group in methacrylic monomers appreciably affects their polymerization activity only at low temperatures, where steric screening of the growing polymer radical becomes important.     

A novel combination of (diacetoxyiodo)benzene and tert-butylhydroperoxide for the facile oxidative dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones

A clean and efficient oxidative dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones to 1,2-dihydropyrimidines has been achieved through a novel combination of (diacetoxyiodo)benzene and tert-butylhydroperoxide in CH₂Cl₂.     

Construction of Enzyme-Responsive Micelles Based on Theranostic Zwitterionic Conjugated Bottlebrush Copolymers with Brush-on-Brush Architecture for Cell Imaging and Anticancer Drug Delivery

Bottlebrush copolymers with different chemical structures and compositions as well as diverse architectures represent an important kind of material for various applications, such as biomedical devices. To our knowledge, zwitterionic conjugated bottlebrush copolymers integrating fluorescence imaging and tumor microenvironment-specific responsiveness for efficient intracellular drug release have been rarely reported, likely because of the lack of an efficient synthetic approach. For this purpose, in this study, we reported the successful preparation of well-defined theranostic zwitterionic bottlebrush copolymers with unique brush-on-brush architecture. Specifically, the bottlebrush copolymers were composed of a fluorescent backbone of polyfluorene derivate (PFONPN) possessing the fluorescence resonance energy transfer with doxorubicin (DOX), primary brushes of poly(2-hydroxyethyl methacrylate) (PHEMA), and secondary graft brushes of an enzyme-degradable polytyrosine (PTyr) block as well as a zwitterionic poly(oligo (ethylene glycol) monomethyl ether methacrylate-co-sulfobetaine methacrylate) (P(OEGMA-co-SBMA)) chain with super hydrophilicity and highly antifouling ability via elegant integration of Suzuki coupling, NCA ROP and ATRP techniques. Notably, the resulting bottlebrush copolymer, PFONPN₉-g-(PHEMA₁₅-g-(PTyr₁₆-b-P(OEGMA₆-co-SBMA₆)₂)) (P₂) with a lower MW ratio of the hydrophobic side chains of PTyr and hydrophilic side chains of P(OEGMA-co-SBMA) could self-assemble into stabilized unimolecular micelles in an aqueous phase. The resulting unimolecular micelles showed a fluorescence quantum yield of 3.9% that is mainly affected by the pendant phenol groups of PTyr side chains and a drug-loading content (DLC) of approximately 15.4% and entrapment efficiency (EE) of 90.6% for DOX, higher than the other micelle analogs, because of the efficient supramolecular interactions of π–π stacking between the PTyr blocks and drug molecules, as well as the moderate hydrophilic chain length. The fluorescence of the PFONPN backbone enables fluorescence resonance energy transfer (FRET) with DOX and visualization of intracellular trafficking of the theranostic micelles. Most importantly, the drug-loaded micelles showed accelerated drug release in the presence of proteinase K because of the enzyme-triggered degradation of PTyr blocks and subsequent deshielding of P(OEGMA-co-SBMA) corona for micelle destruction. Taken together, we developed an efficient approach for the synthesis of enzyme-responsive theranostic zwitterionic conjugated bottlebrush copolymers with a brush-on-brush architecture, and the resulting theranostic micelles with high DLC and tumor microenvironment-specific responsiveness represent a novel nanoplatform for simultaneous cell image and drug delivery.