Liquid-liquid extraction of arsenic(III), antimony(III) and bismuth(III) with potassium ethyl xanthate

Summary Methods are described for quantitative extraction of arsenic(III), antimony(III) and bismuth(III) with potassium ethyl xanthate-carbon tetrachloride. The optimum acidity conditions are 0.1–0.2 M hydrochloric acid for arsenic, 1.8–2.5 M hydrochloric acid for antimony and p_H 1.5–4.0 for bismuth. From the organic extracts arsenic and antimony are estimated by conventional iodometric methods while bismuth is determined spectrophotometrically at 400 nm. The effect of acidity, reagent concentration, period of extraction and diverse ions are discussed. The infra-red spectra are also described.

---

Zusammenfassung Verfahren für die Extraktion von As(III), Sb(III) und Bi(III) mit Kaliumäthylxanthat/Tetrachlorkohlenstoff werden beschrieben. Die optimalen Aciditätsbedingungen sind: 0,1–0,2 M HCl für As, 1,8–2,5 M HCl für Sb und p_H 1,5–4,0 für Bi. As und Sb werden nach Entfernung des organischen Lösungsmittels jodometrisch bestimmt; Bi wird im gelb gefärbten Extrakt spektrophotometrisch bei 400 nm bestimmt. Der Einflu\ der Acidität, der Reagenskonzentration, der Schütteldauer und verschiedener Fremdionen auf die Extraktion wird besprochen. Die IR-Spektren der gebildeten Komplexe werden diskutiert.

     

A potentiometric determination of potassium ethyl xanthate

A potentiometric determination of potassium ethyl xantbate with Cu(II)-acetate is described From the results it follows that CS₂ reacts quantitatively with etimnolic KOH to give potassium ethyl xanthate The method may therefore be used for the determination of CS₂.     

Characterization of soil particle surfaces using adsorption excess isotherms

Measurement of adsorption excess isotherms of methanol-benzene mixtures was applied to the characterization of soil particle surfaces. The sorption capacity and Gibbs energy of sorption of the solid-liquid interface were determined for montmorillonite, three types of soil, and their humin fractions. The soils were found to be less polar or less hydrophilic than the clay, and the humin fraction of soils was found to be less hydrophilic than the whole soils. The soil and humin samples have heterogeneous surfaces which can be divided in two regions on the basis of their relative polarity. The x-axis intersection of the straight section of isotherm assigns the relative proportions of the hydrophilic and hydrophobic regions of the surface.     

Substoichiometric determination of zinc with potassium ethyl xanthate

A rapid radiochemical method has been designed for the determination of microgram quantities of zinc, based on the substoichiometric isotope dilution, using potassium ethyl xanthate as the extraction reagent. pH 5.5 in acetate buffers and chloroform as the extractant were found to be suitable for quantitative substoichiometric extraction. The influence of the diverse ions on the extraction was studied. The zinc contents of a medicinal preparation and biological samples were determined by the present method.     

Substoichiometric determination of selenium with potassium ethyl xanthate

A substoichiometric radiochemical method has been developed for the determination of selenium with potassium ethyl xanthate. The selenium ethyl xanthate complex formed was extracted into chloroform from borate buffer at pH 5. The effect of foreign ions on the extraction was studied. Microgram quantities of selenium could be conveniently determined with a fair degree of accuracy. The method has been successfully applied for the determination of selenium content in food stuffs such as Jaggery and Wheat powder.     

Characterization of fibrinogen adsorption onto glass microcapillary surfaces by ELISA

Adsorption of biomolecules onto microchannel surfaces remains a critical issue in microfluidic devices. This paper investigates the adsorption of fibrinogen on glass microcapillaries using an immunoassay method (ELISA) and X-ray photoelectron spectroscopy (XPS). Various adsorption conditions such as protein concentrations and incubation times, buffer pH, buffer ionic strengths and effects of flow are presented. ELISA is successfully demonstrated as a facile and robust technique to examine these phenomena. The highest adsorption level occurs near the isoelectric point of fibrinogen (pH 5.0) and low buffer ionic strengths (0-8 mM). Microchannel surface saturation was achieved at a fibrinogen solution concentration of approximately 50 microg ml(-1). Fibrinogen adsorption under flow was always higher than that seen in static systems. The importance of diffusion phenomena in microchannels on protein adsorption was demonstrated. ELISA experiments using fused silica and PEEK have also confirmed significant adsorption on these mass spectrometer transfer line materials.     

The adsorption of silver on potassium cyanocobalt(II)ferrate(II)

A procedure is described for recovering silver from industrial sewage (mining and photo-industry etc) with the aid of the ion-exchanger potassium cyanocobalt(II)ferrate(II) (KCFC). Silver is easily removed by simple mixing with KCFC, even from solutions containing less than 1 g of silver per ton of solution. The process is performed at room temperature at pH < 7. There is no interference from a 600-fold amount of Ca, Cu(II), Zn, Cd, Pb, and Fe(II). Pure silver may be obtained by dissolution of the ion-exchanger in potassium cyanide solution, subsequent precipitation as sulphide, and roasting, or by melting it out of the ion-exchanger after heat treatment in a high-frequency furnace. With 1 kg of KCFC, 1.25 kg of silver may be extracted from solution. The process is simple and economic.     

Colloid particle adsorption at random site (heterogeneous) surfaces

Irreversible adsorption of colloid particles and globular proteins at heterogeneous surfaces was studied theoretically. The substrate surface was created by covering a uniform surface by coupling sites (active centers) of a desired coverage. In contrast to previous studies concerned with disks, in our simulations the centers were modeled by spheres having a size smaller than that of the adsorbing particles. Adsorption was assumed to occur due to short-ranged attractive interactions if the colloid particle contacted the center. The Monte-Carlo-type simulations enabled one to determine the initial flux, adsorption kinetics, jamming coverage, and the structure of the particle monolayer as a function of the site coverage and the particle/site size ratio, denoted by lambda. It was revealed that the initial flux increased significantly with the site coverage theta(s) and the lambda parameter. This behavior was quantitatively interpreted in terms of the scaled particle theory. It also was demonstrated that particle adsorption kinetics and the jamming coverage increased significantly, at fixed site coverage, when the lambda parameter increased. Practically, for alpha=lambda(2)theta(s)>1 the jamming coverage at the heterogeneous surfaces attained the value pertinent to continuous surfaces. The results obtained prove unequivocally that the spherically shaped sites are much more effective in binding particles than the disk-shaped sites considered previously.     

Poly(N-vinylpyrrolidone)-modified surfaces repel plasma protein adsorption

The present work aimed to study the interaction between plasma proteins and PVP-modified surfaces under more complex protein conditions.In the competitive adsorption of fibrinogen(Fg) and human serum albumin(HSA),the modified surfaces showed preferential adsorption of HSA.In 100%plasma,the amount of Fg adsorbed onto PVP-modified surfaces was as low as 10 ng/cm~2,suggesting the excellent protein resistance properties of the modified surfaces.In addition, immunoblots of proteins eluted from the modified surfaces after plasma contact confirmed that PVP-modified surfaces can repel most plasma proteins,especially proteins that play important roles in the process of blood coagulation.     

Substoichiometric radiochemical determination of mercury with potassium benzyl xanthate

A sensitive and rapid radiochemical method has been developed for the determination of microgram amounts of mercury by substoichiometric extraction of its 12 complex with potassium benzyl xanthate into chloroform from pH 5.5 acetate buffer. The influence of various foreign ions on the extraction was studied. 2–20 g of mercury was determined with an average error of 1.78%. The method developed was utilized to determine the mercury content of water samples.     

Substoichiometric radiochemical determination of antimony with potassium ethyl xanthate

A rapid and sensitive substoichiometric radiochemical method has been developed for the determination of microgram amounts of antimony employing potassium ethylxanthate as a reagent and chloroform as an extractant from sulfuric acid medium. The effect of associated ions on the extraction was studied. The method developed was successfully applied to determine the antimony content in standard solutions and synthetic mixture with an average error ±2.07%     

Different adsorption structures of pyridine on Si(001) and Ge(001) surfaces

The adsorption and reaction of pyridine on the Si(001) and Ge(001) surfaces are investigated by first-principles density-functional calculations within the generalized gradient approximation. On both surfaces the N atom of pyridine initially reacts with the down atom of the dimer, forming a single bond between the N atom and the down atom. On Ge(001) such an adsorption configuration is most favorable, but on Si(001) a further reaction with a neighboring dimer occurs, resulting in formation of a bridge-type configuration. Especially we find that on Ge(001) the bridge-type configuration is less stable than the gas phase. Our results provide an explanation for a subtle difference in the adsorption structures of pyridine on Si(001) and Ge(001), which was observed from recent scanning tunneling microscopy experiments.     

土壤中正丁基黄原酸钾与铅离子的吸附特性研究

通过静态试验研究了土壤对正丁基黄原酸钾的吸附性能和影响因素,以及正丁基黄原酸钾-铅复合污染体系的吸附平衡与动力学特征。结果表明,土壤对正丁基黄原酸钾的吸附过程遵循Lagergren二级动力学模型,等温吸附可用Freundlich模型拟合,提高温度有利于吸附,土壤对正丁基黄原酸钾的吸附属于内扩散控制过程;土壤吸附正丁基黄原酸钾最佳p H范围为5~9,p H较低时正丁基黄原酸钾易被酸解,碱性环境(p H10)将抑制土壤对正丁基黄原酸钾的吸附;正丁基黄原酸钾与Pb2+形成难溶络合物而严重影响了Pb2+在土壤中的吸附,使Pb2+的吸附速率常数由38.319g/(mg·min)提高到70.350g/(mg·min),平衡吸附量(qe)由1.909mg/g降低到1.385mg/g,且影响程度随着Pb2+浓度的升高而减弱。     

Friction and adsorption of aqueous polyoxyethylene (Tween) surfactants at hydrophobic surfaces

The nanotribological responses of a series of nonionic polyoxyethylene surfactants (Tween 20, Tween 40, Tween 60, and Tween 80) were investigated after they were adsorbed from aqueous solution onto atomically smooth hydrophobic substrates. The hydrophobic surfaces were composed of a condensed monolayer of octadecyltriethoxysilane (OTE; contact angle theta>110 degrees ). The nanorheological measurements were performed using a modified surface forces apparatus after coating atomically smooth mica with these OTE monolayers, while adsorption measurements were performed using phase-modulated ellipsometry on silicon wafers coated with these same monolayers. The minimum surface-surface separation observed under high load in friction studies agreed quantitatively with the thickness obtained from ellipsometry. For Tweens 20, 40, and 60, the thickness of the adsorbed film increases with increasing alkyl chain length. Systematic investigations of the nanorheological response showed that there is a "solid-like" elastic response from confined surfactant layers, which is the case for the smallest separations to separations up to slightly larger than twice the adsorbed film thickness. In kinetic friction, these confined layers are characterized by a shear stress of approximately 3 MPa with minimal dependence on shear rate. The magnitude of the sliding shear stress is the same as the apparent yield stress at approximately 3 MPa; it is independent of alkyl chain length within the Tween family of surfactants and corresponds to a nominal friction coefficient of mu approximately 1. A similar friction coefficient is observed for boundary lubrication on the macroscopic scale in a tribometer utilizing hydrophobic surfaces and mu approximately 1.1 for Tweens 20, 40, and 60. These results suggest that while Tween molecules adsorb onto hydrophobic surfaces to form a robust separating layer, the lubricating properties of these layers are dominated by a highly dissipative slip plane, the same for all alkyl chain lengths.     

The kinetics and saturation of reversible adsorption on patterned (heterogeneous) surfaces

We analytically examine the time-dependent adsorption of analyte (solute) on a finite-sized adsorption region as a model for sensors utilizing patterned or heterogeneous surfaces. We account for both reversible adsorption (assuming first-order reaction) and saturation of the adsorption patch that may arise either from packing constraints (finite area) or because of a finite number of binding sites (ligands). Our main conclusions include the following: (1) Saturation effects, due to either finite patch size or finite number of binding sites, become significant at extremely short times. (2) Increasing the strength of binding between the analyte and the adsorption sites increases the adsorbed amount at short times, but, at long times, the mass adsorbed on a weakly binding patch is higher than that on a strongly binding one. (3) The sensitivity of detection, as defined by the adsorption of the minimal analyte mass required for signaling, over a fixed period of time, does not scale as 1/detection time. As a result, increasing the time over which adsorption occurs increases sensitivity, but not linearly. Sensitivity of detection also increases with increasing patch area and initial binding strength.     

CO adsorption and reaction on clean and oxygen-covered Au(211) surfaces

We have used primarily temperature-programmed desorption (TPD) and infrared reflection-absorption spectroscopy (IRAS) to investigate CO adsorption on a Au(211) stepped single-crystal surface. The Au(211) surface can be described as a step-terrace structure consisting of three-atom-wide terraces of (111) orientation and a monatomic step with a (100) orientation, or 3(111) x (100) in microfacet notation. CO was only weakly adsorbed but was more strongly bound at step sites (12 kcal mol(-1)) than at terrace sites (6.5-9 kcal mol(-1)). The sticking coefficient of CO on the Au(211) surface was also higher ( approximately 5x) during occupation of step sites compared to populating terrace sites at higher coverages. The nu(CO) stretching band energy in IRAS spectra indicated that CO was adsorbed at atop sites at all coverages and conditions. A small red shift of nu(CO) from 2126 to 2112 cm(-1) occurred with increasing CO coverage on the surface. We conclude that the presence of these particular step sites at the Au(211) surface imparts stronger CO bonding and a higher reactivity than on the flat Au(111) surface, but these changes are not remarkable compared to chemistry on other more reactive crystal planes or other stepped Au surfaces. Thus, it is unlikely that the presence or absence of this particular crystal plane alone at the surface of supported Au nanoparticles has much to do with the remarkable properties of highly active Au catalysts.     

Chiral templating of surfaces: adsorption of (S)-2-methylbutanoic acid on Pt(111) single-crystal surfaces

The adsorption and thermal chemistry of (S)-(+)-2-methylbutanoic acid ((S)-2MBA) on Pt(111) single-crystal surfaces was characterized by using temperature programmed desorption (TPD) and reflection-adsorption infrared (RAIRS) spectroscopies. Particular emphasis was placed on the characterization of the chiral superstructures formed upon the deposition of the submonolayer coverages of enantiopure (S)-2-methylbutanoate species that are produced by thermal dehydrogenation of the (S)-2MBA. The enantioselectivity of the empty platinum sites left open on those structures were identified by their difference in behavior toward the adsorption of the two enantiomers of propylene oxide. It was found that a significant enhancement in adsorption is possible on surfaces with the same chirality of the probe molecule, specifically that the uptake of (S)-propylene oxide is larger than that of (R)-propylene oxide on (S)-2-methylbutanoate adsorbed layers. This contrasts with the lack of enantioselectivity previously reported for the same adsorbate on Pd(111). Detectable differences in adsorption energetics of (R)- vs (S)-propylene oxide on the (S)-2-methylbutanoate/Pt(111) overlayers were measured but deemed not to be the controlling factor in the enantioselectivity reported in this system.