Comprehensive Mechanism of CO2 Electroreduction on Non-Noble Metal Single-Atom Catalysts of Mo2CS2-MXene

In this work, a series of non-noble metal single-atom catalysts of Mo₂CS₂-MXene for CO₂ reduction were systematically investigated by well-defined density-functional-theory (DFT) calculations. It is found that nine types of transitional metal (TM) supported Mo₂CS₂ (TM-Mo₂CS₂) are very stable, while eight can effectively inhibit the competitive hydrogen evolution reaction (HER). After comprehensively comparing the changes of free energy for each pathway in CO₂ reduction reaction (CO₂RR), it is found that the products of TM-Mo₂CS₂ are not completely CH₄. Furthermore, Cr-, Fe-, Co- and Ni-Mo₂CS₂ are found to render excellent CO₂RR catalytic activity, and their limiting potentials are in the range of 0.245–0.304 V. In particular, Fe-Mo₂CS₂ with a nitrogenase-like structure has the lowest limiting potential and the highest electrocatalytic activity. Ab initio molecular dynamics (AIMD) simulations have also proven that these kinds of single-atom catalysts with robust performance could exist stably at room temperature. Therefore, these single TM atoms anchored on the surface of MXenes can be profiled as a promising catalyst for the electrochemical reduction of CO₂.     

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp−sp² hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM₁−GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO₂ reduction. After anchoring metal atoms on GDY, the catalytic activity of TM₁−GDY (TM=Mn, Co and Cu) for CO₂ reduction reaction (CO₂RR) are significantly improved comparing with the pristine GDY. Among the studied TM₁−GDY, Cu₁−GDY shows excellent electrocatalytic activity for CO₂ reduction for which the product is HCOOH and the limiting potential (U_L) is −0.16 V. Mn₁−GDY and Co₁−GDY exhibit superior catalytic selectivity for CO₂ reduction to CH₄ with U_L of −0.62 and −0.34 V, respectively. The hydrogen evolution reaction (HER) by TM₁−GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO₂RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO₂ conversion into valuable hydrocarbons.     

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction

Closing the anthropogenic carbon cycle by converting CO₂ into reusable chemicals is an attractive solution to mitigate rising concentrations of CO₂ in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO₂ reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at −0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H₂ evolution reaction (HER) to compete with the CO₂ reduction reaction (CO₂RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO₂ reduction for various sizes of Ni metal catalysts.     

Bipyridine‐Assisted Assembly of Au Nanoparticles on Cu Nanowires To Enhance the Electrochemical Reduction of CO2

We report a new strategy to prepare a composite catalyst for highly efficient electrochemical CO₂ reduction reaction (CO₂RR). The composite catalyst is made by anchoring Au nanoparticles on Cu nanowires via 4,4′‐bipyridine (bipy). The Au‐bipy‐Cu composite catalyzes the CO₂RR in 0.1 m KHCO₃ with a total Faradaic efficiency (FE) reaching 90.6 % at ?0.9 V to provide C‐products, among which CH₃CHO (25 % FE) dominates the liquid product (HCOO^?, CH₃CHO, and CH₃COO^?) distribution (75 %). The enhanced CO₂RR catalysis demonstrated by Au‐bipy‐Cu originates from its synergistic Au (CO₂ to CO) and Cu (CO to C‐products) catalysis which is further promoted by bipy. The Au‐bipy‐Cu composite represents a new catalyst system for effective CO₂RR conversion to C‐products.     

Catalyst Engineering for the Selective Reduction of CO2 to CH4: A First-Principles Study on X-MOF-74 (X=Mg,Mn, Fe,Co, Ni,Cu, Zn)

The conversion of carbon dioxide (CO₂) into more valuable chemical compounds represents a critical objective for addressing environmental challenges and advancing sustainable energy sources. The CO₂ reduction reaction (CO₂RR) holds promise for transforming CO₂ into versatile feedstock materials and fuels. Leveraging first-principles methodologies provides a robust approach to evaluate catalysts and steer experimental efforts. In this study, we examine the CO₂RR process using a diverse array of representative cluster models derived from X-MOF-74 (where X encompasses Mg, Mn, Fe, Co, Ni, Cu, or Zn) through first-principles methods. Notably, our investigation highlights the Fe-MOF-74 cluster's unique attributes, including favorable CO₂ binding and the lowest limiting potential of the studied clusters for converting CO₂ to methane (CH₄) at 0.32 eV. Our analysis identified critical factors driving the selective CO₂RR pathway, enabling the formation CH₄ on the Fe-MOF-74 cluster. These factors involve less favorable reduction of hydrogen to H₂ and strong binding affinities between the Fe open-metal site and reduction intermediates, effectively curtailing desorption processes of closed-shell intermediates such as formic acid (HCOOH), formaldehyde (CH₂O), and methanol (CH₃OH), to lead to selective CH₄ formation.     

Positive Valent Metal Sites in Electrochemical CO2 Reduction Reaction

The discovery of high-performance catalysts for the electrochemical CO₂ reduction reaction ( CO₂RR) has faced an enormous challenge for years. The lack of cognition about the surface active structures or centers of catalysts in complex conditions limits the development of advanced catalysts for CO₂RR. Recently, the positive valent metal sites (PVMS) are demonstrated as a kind of potential active sites, which can facilitate carbon dioxide (CO₂) activation and conversation but are always unstable under reduction potentials. Many advanced technologies in theory and experiment have been utilized to understand and develop excellent catalysts with PVMS for CO₂RR. Here, we present an introduction of some typical catalysts with PVMS in CO₂RR and give some understanding of the activity and stability for these related catalysts.     

The atomic-level regulation of single-atom site catalysts for the electrochemical CO2 reduction reaction

The electrochemical CO₂ reduction reaction (CO₂RR) is viewed as a promising way to remove the greenhouse gas CO₂ from the atmosphere and convert it into useful industrial products such as methane, methanol, formate, ethanol, and so forth. Single-atom site catalysts (SACs) featuring maximum theoretical atom utilization and a unique electronic structure and coordination environment have emerged as promising candidates for use in the CO₂RR. The electronic properties and atomic structures of the central metal sites in SACs will be changed significantly once the types or coordination environments of the central metal sites are altered, which appears to provide new routes for engineering SACs for CO₂ electrocatalysis. Therefore, it is of great importance to discuss the structural regulation of SACs at the atomic level and their influence on CO₂RR activity and selectivity. Despite substantial efforts being made to fabricate various SACs, the principles of regulating the intrinsic electrocatalytic performances of the single-atom sites still needs to be sufficiently emphasized. In this perspective article, we present the latest progress relating to the synthesis and catalytic performance of SACs for the electrochemical CO₂RR. We summarize the atomic-level regulation of SACs for the electrochemical CO₂RR from five aspects: the regulation of the central metal atoms, the coordination environments, the interface of single metal complex sites, multi-atom active sites, and other ingenious strategies to improve the performance of SACs. We highlight synthesis strategies and structural design approaches for SACs with unique geometric structures and discuss how the structure affects the catalytic properties.

Electrochemical CO₂ reduction reaction (CO₂RR) is a promising way to remove CO₂ and convert it into useful industrial products. Single-atom site catalysts provide opportunities to regulate the active sites of CO₂RR catalysts at the atomic level.     

Key factors for designing single-atom metal-nitrogen-carbon catalysts for electrochemical CO2 reduction

The electrochemical CO₂ reduction (CO₂RR) is a sustainable approach to mitigate the increased CO₂ emissions and simultaneously produce value-added chemicals and fuels. Metal-nitrogen-carbon (M-N-C) based single-atom catalysts (SACs) have emerged as promising electrocatalysts for CO₂RR with high activity, selectivity, and stability. To design efficient SACs for CO₂RR, the key influence factors need to be understood. Here, we summarize recent achievements on M-N-C SACs for CO₂RR and highlight the significance of the key constituting factors, metal sites, the coordination environment, and the substrates, for achieving high CO₂RR performance. The perspective views and guidelines are provided for the future direction of developing M-N-C SACs as CO₂RR catalysts.     

Unexpected high selectivity for acetate formation from CO2 reduction with copper based 2D hybrid catalysts at ultralow potentials

Copper-based catalysts are efficient for CO₂ reduction affording commodity chemicals. However, Cu(i) active species are easily reduced to Cu(0) during the CO₂RR, leading to a rapid decay of catalytic performance. Herein, we report a hybrid-catalyst that firmly anchors 2D-Cu metallic dots on F-doped Cu_xO nanoplates (Cu_xOF), synthesized by electrochemical-transformation under the same conditions as the targeted CO₂RR. The as-prepared Cu/Cu_xOF hybrid showed unusual catalytic activity towards the CO₂RR for CH₃COO⁻ generation, with a high FE of 27% at extremely low potentials. The combined experimental and theoretical results show that nanoscale hybridization engenders an effective s,p-d coupling in Cu/Cu_xOF, raising the d-band center of Cu and thus enhancing electroactivity and selectivity for the acetate formation. This work highlights the use of electronic interactions to bias a hybrid catalyst towards a particular pathway, which is critical for tuning the activity and selectivity of copper-based catalysts for the CO₂RR.

A two-dimensional (2D) copper hybrid catalyst (Cu/Cu_xOF) composed of metallic Cu well dispersed on 2D F-doped Cu_xO nanoplates (Cu_xOF) is reported, which shows high catalytic activity toward the CO₂RR for acetate generation.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Isolated Tin(IV) Active Sites for Highly Efficient Electroreduction of CO2 to CH4 in Neutral Aqueous Solution

The development of efficient electrocatalysts with non-copper metal sites for electrochemical CO₂ reduction reactions (eCO₂RR) to hydrocarbons and oxygenates is highly desirable, but still a great challenge. Herein, a stable metal–organic framework (DMA)₄[Sn₂(THO)₂] (Sn-THO, THO⁶⁻ = triphenylene-2,3,6,7,10,11-hexakis(olate), DMA = dimethylammonium) with isolated and distorted octahedral SnO₆²⁻ active sites is reported as an electrocatalyst for eCO₂RR, showing an exceptional performance for eCO₂RR to the CH₄ product rather than the common products formate and CO for reported Sn-based catalysts. The partial current density of CH₄ reaches a high value of 34.5 mA cm⁻², surpassing most reported copper-based and all non-Cu metal-based catalysts. Our experimental and theoretical results revealed that the isolated SnO₆²⁻ active site favors the formation of key *OCOH species to produce CH₄ and can greatly inhibit the formation of *OCHO and *COOH species to produce *HCOOH and *CO, respectively.     

Enhancing CO2 Electroreduction to Methane with a Cobalt Phthalocyanine and Zinc–Nitrogen–Carbon Tandem Catalyst

Developing copper-free catalysts for CO₂ conversion into hydrocarbons and oxygenates is highly desirable for electrochemical CO₂ reduction reaction (CO₂RR). Herein, we report a cobalt phthalocyanine (CoPc) and zinc–nitrogen–carbon (Zn-N-C) tandem catalyst for CO₂RR to CH₄. This tandem catalyst shows a more than 100 times enhancement of the CH₄/CO production rate ratio compared with CoPc or Zn-N-C alone. Density functional theory (DFT) calculations and electrochemical CO reduction reaction results suggest that CO₂ is first reduced into CO over CoPc and then CO diffuses onto Zn-N-C for further conversion into CH₄ over Zn-N₄ site, decoupling complicated CO₂RR pathway on single active site into a two-step tandem reaction. Moreover, mechanistic analysis indicates that CoPc not only generates CO but also enhances the availability of *H over adjacent N sites in Zn-N₄, which is the key to achieve the high CH₄ production rate and understand the intriguing electrocatalytic behavior which is distinctive to copper-based tandem catalysts.     

Liquid Fluxional Ga Single Atom Catalysts for Efficient Electrochemical CO2 Reduction

Precise design and tuning of the micro-atomic structure of single atom catalysts (SACs) can help efficiently adapt complex catalytic systems. Herein, we inventively found that when the active center of the main group element gallium (Ga) is downsized to the atomic level, whose characteristic has significant differences from conventional bulk and rigid Ga catalysts. The Ga SACs with a P, S atomic coordination environment display specific flow properties, showing CO products with FE of ≈92 % at −0.3 V vs. RHE in electrochemical CO₂ reduction (CO₂RR). Theoretical simulations demonstrate that the adaptive dynamic transition of Ga optimizes the adsorption energy of the *COOH intermediate and renews the active sites in time, leading to excellent CO₂RR selectivity and stability. This liquid single atom catalysts system with dynamic interfaces lays the foundation for future exploration of synthesis and catalysis.     

Enhanced Electroreduction of Carbon Dioxide to Methanol Using Zinc Dendrites Pulse‐Deposited on Silver Foam

The electrocatalytic CO₂ reduction reaction (CO₂RR) can dynamise the carbon cycle by lowering anthropogenic CO₂ emissions and sustainably producing valuable fuels and chemical feedstocks. Methanol is arguably the most desirable C₁ product of CO₂RR, although it typically forms in negligible amounts. In our search for efficient methanol‐producing CO₂RR catalysts, we have engineered Ag‐Zn catalysts by pulse‐depositing Zn dendrites onto Ag foams (PD‐Zn/Ag foam). By themselves, Zn and Ag cannot effectively reduce CO₂ to CH₃OH, while their alloys produce CH₃OH with Faradaic efficiencies of approximately 1 %. Interestingly, with nanostructuring PD‐Zn/Ag foam reduces CO₂ to CH₃OH with Faradaic efficiency and current density values reaching as high as 10.5 % and ?2.7 mA cm^?2, respectively. Control experiments and DFT calculations pinpoint strained undercoordinated Zn atoms as the active sites for CO₂RR to CH₃OH in a reaction pathway mediated by adsorbed CO and formaldehyde. Surprisingly, the stability of the *CHO intermediate does not influence the activity.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.     

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H2 Syngas Production from Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂RR) to produce synthesis gas (syngas) with tunable CO/H₂ ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd‐modified niobium nitride (Pd/NbN) is found to generate much higher CO and H₂ partial current densities and greater CO Faradaic efficiency than Pd‐modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In‐situ X‐ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO₂RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO₂RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO₂ to syngas with a potential reduction in precious metal loading.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.