Magnetic properties of RE2MnGe6 (RE = La,Ce) and YMn0.3Ge2 germanides

The magnetic data of RE₂MnGe₆ (RE = La, Ce) and YMn_0.3Ge₂ are reported. La₂MnGe₆ and Ce₂MnGe₆ crystallize in the orthorhombic Ce₂CuGe₆ structure type, space group Amm2 (No. 38). The non-stoichiometric YMn_0.3Ge₂ compound crystallizes with the orthorhombic CeNiSi₂-type structure (space group Cmcm (No. 36)). The studied RE₂MnGe₆ (RE = La, Ce) intermetallics are characterized by ferromagnetic properties with Curie temperatures 177 (La) and 150 K (Ce), respectively. For YMn_0.3Ge₂ the low-field magnetic measurements indicate the antiferromagnetic property below 395 K with the small ferromagnetic component. The values of the magnetic moments in the ordered state indicate the ferromagnetic ordering in La₂MnGe₆ and complex magnetic order with the ferromagnetic component in YMn_0.3Ge₂ and Ce₂MnGe₆. The hysteresis loop and values of the coercivity field indicate that these compounds are soft magnetic materials.     

Substitutional disorder in Sr2−yEuyB2−2xSi2+3xAl2−xN8+x (x≃ 0.12, y≃ 0.10)

A novel nitride, Sr_2−yEu_yB_2−2xSi_2+3xAl_2−xN_8+x (x≃ 0.12, y≃ 0.10) (distrontium europium diboron disilicon dialuminium octanitride), with the space group P2c, was synthesized from Sr₃N₂, EuN, Si₃N₄, AlN and BN under nitrogen gas pressure. The structure consists of a host framework with Sr/Eu atoms accommodated in the cavities. The host framework is constructed by the linkage of MN₄ tetrahedra (M = Si, Al) and BN₃ triangles, and contains substitutional disorder described by the alternative occupation of B₂ or Si₂N on the (0, 0, z) axis. The B₂:Si₂N ratio contained in an entire crystal is about 9:1.     

2D l‐Di‐toluoyl‐tartaric acid Lanthanide Coordination Polymers: Toward Single‐component White‐Light and NIR Luminescent Materials

A series of five l ‐di‐p‐toluoyl‐tartaric acid (l ‐DTTA) lanthanide coordination polymers, namely {[Ln₄K⁴ L₆(H₂O)_x]?yH₂O}_n, [Ln=Dy ( 1 ), x=24, y=12; Ln=Ho ( 2 ), x=23, y=12; Ln=Er ( 3 ), x=24, y=12; Ln=Yb ( 4 ), x=24, y=11; Ln=Lu ( 5 ), x=24, y=12] have been isolated by simple reactions of H₂L (H₂L= L ‐DTTA) with LnCl₃?6 H₂O at ambient temperature. X‐ray crystallographic analysis reveals that complexes 1 – 5 feature two‐dimensional (2D) network structures in which the Ln³⁺ ions are bridged by carboxylate groups of ligands in two unique coordinated modes. Luminescent spectra demonstrate that complex 1 realizes single‐component white‐light emission, while complexes 2 – 4 exhibit a characteristic near‐infrared (NIR) luminescence in the solid state at room temperature.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.     

Über hexagonale Perowskite mit Kationenfehlstellen. XXXIII. Verbindungen vom Typ Ba6−xSrxB2−y3+SEy3+W3□O18

On Hexagonal Perovskites with Cationic Vacancies. XXXIII. Compounds of Type Ba_6?xSr_xB_2?y³⁺SE_y³⁺W₃□O₁₈ In the series Ba_6?xSr_xLu_2?ySE_y³⁺W₃□O₁₈ a substitution of Sr²⁺ for Ba²⁺ is possible. According to intensity calculations on powder data of BaSr₅Lu_1,6Ho_0,4W₃□O₁₈ the compounds crystallize in a rhombohedral 18 L type with the sequence (hhcccc)₃; space group R3 m. The refined, intensity related R' value is 11.5%. The differences in properties (diffuse reflectance spectra, photoluminescence) between the hexagonal modifications Ba₆B_2?y³⁺SE_y³⁺W₃□O₁₈ (B³⁺ ? Gd, Y, Lu; SE³⁺ ? Sm, Eu, Tb, Dy, Ho, Er, Tm) and the corresponding cubic HT modifications are discussed.     

In situ crystalline investigation of sol–gel deposited barium stannate (Ba<Subscript>x</Subscript>SnO<Subscript>2+y</Subscript>; x:y ≈ 1:1) nanoparticles in alkaline medium

Fine layers of barium stannate nanoparticles have been synthesized by sol–gel technique with tin chloride pentahydrate (SnCl₄·5H₂O) and barium sulphate (BaSO₄). Physico-chemical properties of barium stannate, Ba_xSnO_2+y; x:y ≈ 1:1 were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and UV–Visible spectrophotometry technique. A growth mechanism based on the combination of particle sticking and molecule level heterogeneous growth is proposed. It has been found that the particle size of all the samples was distributed in the range 3.0–6.5 ? while optical absorption spectrum indicates that Ba_xSnO_2+y nanoparticles have a direct band gap of 3.9 eV.     

Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

Y2SiO5:Ce3+荧光体的基质多面体替换及其对发光性能的调控研究

荧光材料基质的结构调制对于调控发光材料的发光性能,探索固体结构-性能关系具有重要的研究意义。本文以Y2SiO5基质为模型,分别利用Si/Al和Si/P取代,以[AlO4]和[PO4]四面体替换[SiO4]四面体,设计合成了一系列组成为Y1.95Si1-xAlxO5-xFx∶0.05Ce3+(x=0.05,x=0.1,x=0.2,x=0.4,x=1)和Y1.95-yCaySi1-yPyO5∶0.05Ce3+(y=0,y=0.02,y=0.04,y=0.06,y=0.08,y=0.2)的荧光材料。结合X射线衍射、荧光光谱、荧光寿命等测试手段对其进行了表征分析。结果表明,在x≤0.2,y≤0.04时得到的产物能够保持Y2SiO5的结构特征,在一定的基质组成替换范围内,设计合成的样品Y1.95Si1-xAlxO5-xFx∶0.05Ce3+、Y1.95-yCaySi1-yPyO5∶0.05Ce3+能提高发光强度,发射光谱呈现蓝移现象。荧光寿命测试表明这两个系列的化合物中Ce3+所处的基质环境变化较小,Ce3+发光也未产生较大的变化。     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

ChemInform Abstract: The Crystal Structures of m,o‐Ce3Pt4Sn6 and Ce1‐xPt6Al13+2x.

Single crystals of Ce₃Pt₄Sn₆ (I) and Ce_1‐xPt₆Al_13+2x (x = 0.207, (II)) are isolated by mechanical fragmentation of specimens grown from self‐fluxes (Sn or Al, resp.) by slow cooling from the melt.     

Über hexagonale Perowskite mit Kationenfehlstellen. XXXII. Die Photolumineszenz der dreiwertigen Seltenen Erden in den Systemen Ba2−ySryLa2−xSExMgW2□O12

On Hexagonal Perovskites with Cationic Vacancies. XXXII. Photoluminescence of Trivalent Rare Earth in the Systems Ba_2?ySr_yLa_2?xRE_xMgW₂□O₁₂ In the series Ba_2?ySr_yLa_2?xRE_xMgW₂□O₁₂ the Ba²⁺ can be completely substituted by Sr²⁺. All compounds crystallize in the rhombohedral 12 L-type (space group R3 m; sequence (hhcc)₃). By doping the stacking polytypes with some of the trivalent rare earths efficient visible photoluminescence is obtained. The simultaneous incorporation of two different rare earth ions leads to two-color-phosphors, which, according to the excitation energy used, emit either mainly the typical spectrum from one or the other activator; the corresponding luminescence mechanism are discussed.     

Catalytic Properties of Nanoscale Iron‐Doped Zirconia Solid‐Solution Aerogels

Nanoscale iron‐doped zirconia solid‐solution aerogels are prepared via a simple ethanol thermal route using zirconyl nitrate and iron nitrate as starting materials, followed by a supercritical fluid drying process. Structural characteristics are investigated by means of powder X‐ray diffraction (XRD), thermal analyses (TG/DTA), N₂ adsorption measurements and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The results show that the resulting iron‐doped solid solutions are metastable tetragonal zirconia which exhibit excellent dispersibility and high solubility of iron oxide. Further, when the Fe:(Fe+Zr) ratio x is lower than 0.10, all of the Fe³⁺ ions can be incorporated into ZrO₂ by substituting Zr⁴⁺ to form Zr_1?xFe_xO_y solid solutions. Moreover, for the first time, an additional hydroxyl group band that is not present in pure ZrO₂ is observed by DRIFTS for the Zr(Fe)O₂ solid solution. This is direct evidence of Fe³⁺ ions incorporated into ZrO₂. These Zr_1?xFe_xO_y solid solutions are excellent catalysts for the solvent‐free aerobic oxidation of n‐hexadecane using air as the oxidant under ambient conditions. The Zr_0.8Fe_0.2O_y solid‐solution catalyst demonstrates the best catalytic properties, with the conversion of n‐hexadecane reaching 36.2 % with 48 % selectivity for ketones and 24 % selectivity for alcohols and it can be recycled five times without significant loss of activity.     

A Flame‐Reaction Method for the Large‐Scale Synthesis of High‐Performance SmxCoy Nanomagnets

We report a flame‐reaction method to synthesize high‐performance Sm_xCo_y (x=1, y=5; x=2, y=17) particles on a multigram scale. This flame reaction allows the controlled decomposition of Sm(NO₃)₃ and Co(NO₃)₂ to 320 nm SmCo‐O (SmCoO₃ + Co₃O₄) particles. A 5.8 g sample of SmCo_3.8‐O particles was coated with CaO and then reduced at 900 °C by Ca to give 4.2 g of 260 nm SmCo₅ particles. The SmCo₅ particles are strongly ferromagnetic and the aligned particles in epoxy resin exhibit a large room‐temperature coercivity (H_c) of 41.8 kOe and giant (BH)_max (maximum magnetic energy product) of 19.6 MGOe, the highest value ever reported for SmCo₅ made by chemical methods. This synthesis can be extended to synthesize Sm₂Co₁₇ particles, providing a general approach to scaling up the synthesis of high‐performance Sm_xCo_y nanomagnets for permanent magnet applications.     

ChemInform Abstract: Ca54In13B4‐xH23+x: A Complex Metal Subhydride Featuring Ionic and Metallic Regions.

Ca₅₄In₁₃B_4‐xH_23+x (2.4 < x < 4) is prepared by solid state reactions of Ca, Li, In, B, and CaH₂ in the molar ratio of 10:10:1:1:1, resp., using Ca and Li as a flux (stainless steel container in evacuated silica tube, 1050 °C, 2 h; controlled cooling).     

Formation of MgxNbyOx+y through the Mechanochemical Reaction of MgH2 and Nb2O5, and Its Effect on the Hydrogen‐Storage Behavior of MgH2

The present study aims to understand the catalysis of the MgH₂–Nb₂O₅ hydrogen storage system. To clarify the chemical interaction between MgH₂ and Nb₂O₅, the mechanochemical reaction products of a composite mixture of MgH₂+0.167 Nb₂O₅ was monitored at different time intervals (2, 5, 15, 30, and 45 min, as well as 1, 2, 5, 10, 15, 20, 25, and 30 h). The study confirms the formation of catalytically active Nb‐doped MgO nanoparticles (typically Mg_xNb_yO_x+y, with a crystallite size of 4–8 nm) by transforming reactants through an intermediate phase typified by Mg_m?xNb_2n?yO_5n?(x+y). The initially formed Mg_xNb_yO_x+y product is shown to be Nb rich, with the concentration of Mg increasing upon increasing milling time. The nanoscale end‐product Mg_xNb_yO_x+y closely resembles the crystallographic features of MgO, but with at least a 1–4 % higher unit cell volume. Unlike MgO, which is known to passivate the surfaces in MgH₂ system, the Nb‐dissolved MgO effectively mediates the Mg–H₂ sorption reaction in the system. We believe that this observation will lead to new developments in the area of catalysis for metal–gas interactions.     

Light‐Induced Chiral Iron Copper Selenide Nanoparticles Prevent β‐Amyloidopathy In Vivo

The accumulation and deposition of β‐amyloid (Aβ) plaques in the brain is considered a potential pathogenic mechanism underlying Alzheimer's disease (AD). Chiral l/d ‐Fe_xCu_ySe nanoparticles (NPs) were fabricated that interfer with the self‐assembly of Aβ42 monomers and trigger the Aβ42 fibrils in dense structures to become looser monomers under 808 nm near‐infrared (NIR) illumination. d ‐Fe_xCu_ySe NPs have a much higher affinity for Aβ42 fibrils than l ‐Fe_xCu_ySe NPs and chiral Cu_2?xSe NPs. The chiral Fe_xCu_ySe NPs also generate more reactive oxygen species (ROS) than chiral Cu_2?xSe NPs under NIR‐light irradiation. In living MN9D cells, d ‐NPs attenuate the adhesion of Aβ42 to membranes and neuron loss after NIR treatment within 10 min without the photothermal effect. In‐vivo experiments showed that d ‐Fe_xCu_ySe NPs provide an efficient protection against neuronal damage induced by the deposition of Aβ42 and alleviate symptoms in a mouse model of AD, leading to the recovery of cognitive competence.     

ChemInform Abstract: Mixed‐Valent Neptunium(IV/V) Compound with Cation—Cation‐Bound Six‐Membered Neptunyl Rings.

Na_xNp^IV(Np^VO₂)₆ (OH)_1+xCl₉(H₂O)_8‐x (0 < x ≤ 1) is synthesized by evaporation of a neptunium(V) acidic (HCl) stock solution over several months to complete dryness.     

Guest‐, Light‐ and Thermally‐Modulated Spin Crossover in [FeII2] Supramolecular Helicates

A new bis(pyrazolylpyridine) ligand (H₂L) has been prepared to form functional [Fe₂(H₂L)₃]⁴⁺ metallohelicates. Changes to the synthesis yield six derivatives, X@[Fe₂(H₂L)₃]X(PF₆)₂?xCH₃OH ( 1 , x=5.7 and X=Cl; 2 , x=4 and X=Br), X@[Fe₂(H₂L)₃]X(PF₆)₂?yCH₃OH?H₂O ( 1 a , y=3 and X=Cl; 2 a , y=1 and X=Br) and X@[Fe₂(H₂L)₃](I₃)₂?3 Et₂O ( 1 b , X=Cl; 2 b , X=Br). Their structure and functional properties are described in detail by single‐crystal X‐ray diffraction experiments at several temperatures. Helicates 1 a and 2 a are obtained from 1 and 2 , respectively, by a single‐crystal‐to‐single‐crystal mechanism. The three possible magnetic states, [LS–LS], [LS–HS], and [HS–HS] can be accessed over large temperature ranges as a result of the structural nonequivalence of the Fe^II centers. The nature of the guest (Cl^? vs. Br^?) shifts the spin crossover (SCO) temperature by roughly 40 K. Also, metastable [LS–HS] or [HS–HS] states are generated through irradiation. All helicates (X@[Fe₂(H₂L)₃])³⁺ persist in solution.     

Moisture‐resistant and strength retention properties of supercritical CO2‐processed thermoplastic starch modified by polyvinyl alcohol with varying degrees of polymerization

The ease of melt‐processing, moisture‐resistance, and tensile retention properties of scCO₂ and polyvinyl alcohol (PVA)–modified thermoplastic starch (scCO₂TPS_xPVA^a_y) materials were explored in this investigation. These characteristics were considerably improved by PVA modification particularly with decreasing PVA degree of polymerization (DP). The intensities of O―H stretching bands of scCO₂TPS_xPVA^a_y were considerably larger, and peak location of O―H stretching bands were significantly smaller than those of the corresponding TPS_xPVA^a_y and reduced gradually with the decrease in PVA's DP. The ΔH of melting and diffraction peaks of V_h‐type crystals for conditioned TPS_xPVA^a_y and scCO₂TPS_xPVA^a_y were considerably smaller than those of corresponding TPS and TPS_xPVA^a_y aged for the same time period and gradually reduced in intensity with decreasing PVA's DP. Possible reasons accounting for the considerably improved melt processing, moisture resistance, tensile retention, and retrogradation of scCO₂TPS_xPVA^a_y with decreasing PVA's DP are proposed.