Extractive photometric determination of plutonium(IV) with Aliquat-336 and xylenol orange

A rapid extractive photometric method using Aliquat-336 and xylenol organe for the determination of plutonium(IV) at μg levels has been developed. Quantitative extraction is obtained from ∼4M aqueous HNO₃ medium, affording estimation in the presence of several commonly occurring impurities, viz. iron, uranium, fission products and cladding materials. Effects of acidity, reagent concentration and diverse ions on the estimation have also been invetigated. Unlike the well-known absorptiometric method for determining plutonium(IV) employing Arsenazo III, the procedure presented here tolerates manyfold excesses of uranium(VI) as well as chromium(III), iron(III) and zirconium(IV), which are some of the major contaminants of plutonium during reprocessing.     

Solvent extraction of neptunium(IV) from nitric acid solutions by sulphoxides and their mixtures

Studies have been performed on the liquid-liquid extraction of neptunium from nitric acid solutions by di-n-hexylsulphoxide (DHSO) di-no-octylsulphoxide (DOSO) and di-iso-amylsulphoxide (DISO) and their mixtures over a wide range of conditions. At a given strength of the extractant, extraction of Np(IV) increases initially rapidly with increase in the acid concentration; at high acidities, above 8M HNO₃, the extraction decreases. Under otherwise identical conditions, extraction increases with an increase in the extractant concentration. The species extracted would appear to be Np(NO₃)₄·2(R₂SO). A mixture of two extractants extracts more than the sum of the extractions due to the individual components at concentrations corresponding to those of the mixture. After loading the organic phase with uranium(VI), extractability of Np(IV) becomes considerably lower. The diminution in extraction with increase in temperature is small. A comparison of the extraction behaviour of Np(IV) with those of Pu(IV), U(VI) and some associated fission products has been made.     

Cerium(IV), neptunium(IV), and plutonium(IV) 1,2-phenylenediphosphonates: correlations and differences between early transuranium elements and their proposed surrogates

The in situ hydrothermal reduction of Np(VI) to Np(IV) and Pu(VI) to Pu(IV) in the presence of 1,2-phenylenediphosphonic acid (PhP2) results in the crystallization of Np[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (NpPhP2) and Pu[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (PuPhP2), respectively. Similar reactions have been explored with Ce(IV) resulting in the isolation of the Ce(IV) phenylenediphosphonate Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (CePhP2). Single crystal diffraction studies reveal that although all these three compounds all crystallize in the triclinic space group P1?, only PuPhP2 and CePhP2 are isotypic, whereas NpPhP2 adopts a distinct structure. In the cerium and plutonium compounds edge-sharing dimers of MO(8) polyhedra are bridged by the diphosphonate ligand to create one-dimensional chains. NpPhP2 also forms chains. However, the NpO(8) units are monomeric. The protonation of the ligands is also different in the two structure types. Furthermore, the NpO(8) polyhedra are best described as square antiprisms (D(4d)), whereas the CeO(8) and PuO(8) units are trigonal dodecahedra (D(2d)). Bond-valence parameters of R(o) = 1.972 and b = 0.538 have been derived for Np(4+) using a combination of the data reported in this work with that available in crystallographic databases. The UV-vis-NIR absorption spectra of NpPhP2 and PuPhP2 are also reported and used to confirm the tetravalent oxidation states.     

Luminescent determination of neptunium and plutonium in the environment

The preparation of^99mTc-complexes with nine derivatives of (4R)-1,3-thiazolidine-4-carboxylic acid over a broad pH range is described. The labeling efficiency of all compounds was checked by paper- and thin layer chromatography. Paper electrophoresis and gel chromatography indicated the presence of two types of^99mTc-complexes differing in charge and molecular size. Preliminary results of the biodistribution of anionic complexes in mice are given. The structure of both types of the Tc-complexes is also discussed.     

Aqueous complexation of thorium(IV), uranium(IV), neptunium(IV), plutonium(III/IV), and cerium(III/IV) with DTPA

Aqueous complexation of Th(IV), U(IV), Np(IV), Pu(III/IV), and Ce(III/IV) with DTPA was studied by potentiometry, absorption spectrophotometry, and cyclic voltammetry at 1 M ionic strength and 25 °C. The stability constants for the 1:1 complex of each trivalent and tetravalent metal were calculated. From the potentiometric data, we report stability constant values for Ce(III)DTPA, Ce(III)HDTPA, and Th(IV)DTPA of log β(101) = 20.01 ± 0.02, log β(111) = 22.0 ± 0.2, and log β(101) = 29.6 ± 1, respectively. From the absorption spectrophotometry data, we report stability constant values for U(IV)DTPA, Np(IV)DTPA, and Pu(IV)DTPA of log β(101) = 31.8 ± 0.1, 32.3 ± 0.1, and 33.67 ± 0.02, respectively. From the cyclic voltammetry data, we report stability constant values for Ce(IV) and Pu(III) of log β(101) = 34.04 ± 0.04 and 20.58 ± 0.04, respectively. The values obtained in this work are compared and discussed with respect to the ionic radius of each cationic metal.     

Extractive photometric determination of thorium with arsenazo DAL

Arsenazo DAL, the dianilide of3,6-bis (2'-arsonophenylazo)-4,5-dihydroxy-2,7-naphthalenedisulphonic acid, is proposed as an extractive photometric reagent for the highly selective determination of trace amounts of thorium.     

Extractive photometric determination of zinc traces in water

Summary Traces of zinc in water are determined by extracting diethyldithiocarbamates into chloroform at about p_H 9, and stripping lead, zinc and cadmium with 0.16M hydrochloric acid. The cadmium is masked with iodide and the zinc determined spectrophotometrically with Zincon at 620 nm. Iron is masked with citrate before the extraction.

---

Zusammenfassung Zinkspuren in Wasser werden als Diäthyldithiocarbamat mit Chloroform bei p_H 9 extrahiert. Blei, Zink und Cadmium werden dann mit 0,16-n Salzsäure der Chloroformphase entzogen. Cd wird mit Jodid maskiert und Zink spektrophotometrisch mit Zineon bei 620 nm bestimmt. Eisen wird vor der Extraktion mit Zitrat maskiert.

     

Extractive separation of thorium(IV) as a sulphate complex with N-n-octylaniline

The distribution of Th(IV) between aqueous sulphuric acid and organic phases of N-n-octylaniline in xylene is described. The dependence of the metal extraction on acidity and extractant concentration is investigated. Based on the results obtained, the possible extraction mechanism is discussed. The determination of Th(IV) and its separation from synthetic mixtures is suggested. The method is extended to the analysis of thorium in monazite and gas mantles.     

Extractive photometric determination of barium and strontium with dimethylsulphonazo DAL

Dimethylsulphonazo DAL, i.e., the dianilide of 2,7-bis(o-sulpho-p-methylphenylazo)chromotropic acid, is proposed as an extractive photometric reagent for determination of trace amounts of barium and strontium.     

Extractive separation of Th(IV), U(VI), Ti(IV), La(III) and Fe(III) from Zarigan ore

In this study, the effects of various extraction parameters such as extractant types (Cyanex302, Cyanex272, TBP), acid type (nitric, sulfuric, hydrochloric) and their concentrations were studied on the thorium separation efficiency from uranium(VI), titanium(IV), lanthanum(III), iron(III) using Taguchi^??s method. Results showed that, all these variables had significant effects on the selective thorium separation. The optimum separations of thorium from uranium, titanium and iron were achieved by Cyanex302. The aqueous solutions of 0.01 and 1 M nitric acid were found as the best aqueous conditions for separating of thorium from titanium (or iron) and uranium, respectively. The combination of 0.01 M nitric acid and Cyanex272 were found that to be the optimum conditions for the selective separation of thorium from lanthanum. The results also showed that TBP could selectively extract all studied elements into organic phase leaving thorium behind in the aqueous phase. Detailed experiments showed that 0.5 M HNO₃ is the optimum acid concentration for separating of thorium from other elements with acidic extractants such as Cyanex272 and Cyanex302. The two-stage process containing TBP-Cyanex302 was proposed for separation thorium and uranium from Zarigan ore leachate.     

Rapid extraction and photometric determination of cerium(IV) with N-p-tolylbenzohydroxamic acid (p-TBHA)

Summary A method for rapid extraction and spectrophotometric determination of cerium (IV) is described. The cerium-N-p-tolylbenzo-hydroxamic acid complex is extracted into chloroform at the pH 8.4 to 9.8. Maximum absorbance occurs between 460 and 470 nm. The values are reproducible at 465 nm and Beer's law is obeyed at this wavelength over the range of 0.03–40, per ml of the cerium(VI). The molar absorptivity of the cerium-p-TBHA complex is 4.6×10³ l · mole^–1 · cm^–2 at 465. An attempt has been made to determine the cerium in sea water.

---

Zusammenfassung Eine Methode zur schnellen Extraktion und spektrophotometrischen Bestimmung von Cer(IV) wurde beschrieben. Der Cer-Komplex mit N-p-Tolylbenzohydroxamsäure wird bei pH 8,4–9,8 mit Chloroform extrahiert. Das Absorptionsmaximum liegt zwischen 460 und 470 nm. Bei 465 nm sind die Ablesungen reproduzierbar und wird das Beersche Gesetz zwischen 0,03 und 40g Cer/ml erfüllt. Die molare Extinktion des genannten Komplexes beträgt bei 465 nm 4,6 · 10³ l · mol^–1 · cm^–2. Es wurde versucht, den Cergehalt von Meerwasser zu bestimmen.

     

A spectrophotometric method for the determination of neptunium and plutonium in process solutions

A method is described for the determination of neptunium and plutonium in process solutions. This involves the separation of these elements followed by their spectrophotometric determination as Arsenazo III complexes. Neptunium(IV) and plutonium(IV) are separated using TTA extraction method and the separated Np(IV) and Pu(IV) are then determined as their Arzenazo III complexes in 5M HNO₃. A few solutions obtained by dissolving irradiated fuels were analysed for plutonium and neptunium using this method and the results were compared with those obtained by other methods. An attempt was made to use Arsenazo III to determine uranium in the plant solutions.     

Extractive photometric simultaneous determination of iron(II) and copper(II) with syn-phenyl-alpha-pyridyl ketoxime and analysis of ferrites

A rapid method of simultaneous spectrophotometric determination of up to 4 ppm of iron(II) and 20 ppm of copper(II) in a mixture by chloroform extraction of the syn-phenyl-alpha-pyridyl ketoxime complexes at pH 10.0, is developed. Measurements are made at 550 and 475 nm. Two simultaneous equations are solved to obtain the concentrations of the two ions. Analysis of five synthetic mixtures in triplicate gave relative standard deviations of 0.7% for Fe(II) and 1.1% for Cu(II).     

Extractive photometric determination of vanadium with catechol and a tertiary amine

Metal catechol complexes can be extracted from aqueous solution with chloroform in the presence of tertiary amines, for example diphenylguanidine, tributylamine or collidine. Collidine can also be used for the determination of vanadium, titanium, molybdenum and niobium in the presence of a small amount of iron or tantalum. The method for determination of microgram amounts of vanadium is described.     

Extractive photometric determination of cobalt with acid monochrome green S

Cobalt forms with Acid Monochrome Green S a complex which can be extracted quantitatively into butanol from 1.6M sodium chloride medium at pH 9.5-11.5. The molar absorptivity of the complex is 3.2 x 10(4) at 625 mmu. The method has been used to determine cobalt in gallium metal.     

Extractive photometric determination of palladium with o-mercaptobenzoic acid

A procedure is described for the extractive photometric determination of palladium(II) with o-mercaptobenzoic acid. The reagent forms a yellow complex having maximum absorption at 365–370 mμ. The complex is quantitatively extractable with chloroform in the presence of pyridine at pH 5.2–7.2. The color develops immediately at room temperature and is very stable. Beer's law conforms over the range of 0.37–5.86 ppm of palladium. Most of the cations do not interfere in the presence of ascorbic acid and EDTA. Gold and silver are effectively masked with excess of thiocyanate prior to the addition of ascorbic acid and EDTA. Many common anions do not interfere. The molar absorptivity and Sandell sensitivity are 16.7 × 10³ and 0.0065 μg/cm². The reagent forms a 2:1 complex with palladium. The proposed method is simple, rapid, and selective for the determination of palladium(II).     

Uranium/plutonium and uranium/neptunium separation by the Purex process using hydroxyurea

Hydroxyurea dissolved in nitric acid can strip plutonium and neptunium from tri-butyl phosphate efficiently and has little influence on the uranium distribution between the two phases. Simulating the 1B contactor of the Purex process by hydroxyurea with nitric acid solution as a stripping agent, the separation factors of uranium/plutonium and uranium/neptunium can reach values as high as 4.7·10⁴ and 260, respectively. This indicates that hydroxyurea is a promising salt free agent for uranium/plutonium and uranium/neptunium separations.