Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with primary amines leading to N‐alkylmaleimides

Cyclic β‐bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with primary amines under carbon monoxide pressure in MeCN in the presence of a catalytic amount of PdCl₂(PPh₃)₂ to give N‐alkylmaleimides. Copyright © 2012 John Wiley & Sons, Ltd.     

A facile synthesis of new thieno[2,3‐b][1,4]thiazine derivatives starting from 2‐acylamino‐3,3‐dichloroacrylonitriles

Readily available 2‐acylamino‐3,3‐dichloroacrylonitriles are sequentially treated with methyl mercaptoacetate in the presence of sodium methylate and with sulfuric acid to furnish the methyl ester of 7‐amino‐2‐oxo‐3H‐thieno[2,3‐b][1,4]thiazine‐6‐carboxylic acid. Treating it first with triethyl orthoformate and then with ammonia or primary amines, the pyrimidine‐4‐one nucleus is annelated to the thienothiazine system, which is corroborated by spectroscopic methods and X‐ray diffraction analysis. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:411–415, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20232     

β‐Cyclodextrin‐catalyzed decomposition of Caro's acid

The kinetics and mechanism of decomposition of peroxomonosulphate (PMS) in aqueous sodium hydroxide medium in the presence β‐cyclodextrin has been investigated. The rate of decomposition of PMS is considerably enhanced by the added β‐cyclodextrin. The reaction follows first order kinetics with respect to [PMS]. The experimental results suggest the formation of β‐cyclodextrin peroxy anion by the interaction between SO₅^2?, and β‐cyclodextrin anion (BCDO^?). β‐Cyclodextrin peroxy anion subsequently reacts with PMS to give O₂, SO₄^2? and β‐cyclodextrin anion. The rate constant for the β‐cyclodextrin‐catalyzed decomposition of SO₅^2? (BCD + SO₅^2?) is of the same order of magnitude as that of the reaction HSO₅^2? + SO₅^2? products. © 2002 Wiley Periodic mals, Inc. Int J Chem Kinet 34: 508–513, 2002     

Quantum chemical study of several monocyclic complex β‐lactam C‐3, C‐4, and N‐derivatives,and β‐ring model molecules

A quantum chemical study of several complex monocyclic 4‐benzoyl‐4‐phenyl‐β‐lactam derivatives was carried out using cyclobutane, azetidine, 2‐azetidinone, 1‐methyl‐2‐azetidinone, and 3‐methyl‐2‐azetidinone as model compounds. The optimum geometry was obtained for the different conformations. The planarity of the ring was discussed in terms of the influence of the substituents on the amide resonance. To better analyze the amide resonance and the activity of the β‐lactam ring, a vibrational study was also carried out. To examine the influence of solvent polarity on the carbonyl bands, the Fourier transform–infrared (FT‐IR) spectra of the β‐lactam monocyclic derivatives were recorded in CCl₄, C₆H₆, and CHCl₃ solutions. The normal vibrations of the β‐lactam ring in the model compounds were characterized and used in the analysis of the β‐ring of more complex derivatives. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Synthesis of β‐monosubstituted α,β‐unsaturated amides with Z‐selectivity using diphenylphosphonoacetamides

The utility of diphenylphosphonoacetamides [(PhO)₂P(O)CH₂CONRR′] as Horner–Wadsworth–Emmons reagents was examined with five different patterns of substitution upon the amide nitrogen atom ( 2a : R, R′ = CH₂Ph; 2b : R = CH₂Ph, R′ = H; 2c : R = Me, R′ = OMe; 2d : R, R′ = Ph; 2e : R, R′ = (CH₂)₄). The reaction of 2a was found to be Z‐selective for aromatic aldehydes with selectivities up to 95:5. Reagent 2b led to reasonable selectivity for both benzaldehyde (85:15) and 3‐phenylpropionaldehyde (87:13), while 2c was somewhat effective for only the latter alkyl aldehyde (83:17). Compounds 2d and 2e exhibited slightly lower selectivities compared with 2a . © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:515–523, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20054     

Reaction of β‐Bromo‐β,γ‐unsaturated Pyrroline Nitroxide Aldehydes and Nitriles with Aromatic N,S‐Binucleophiles

Reactions of β‐bromo‐β,γ‐unsaturated pyrroline nitroxide aldehyde ( 1 ) or nitrile ( 4 ) or their diamagnetic forms ( 5, 6 ) with 2‐aminothiophenol or 2‐mercaptobenzimidazole were evaluated. The reaction could be reproduced more easily with the application of O‐acetyl derivatives of nitroxides to generate 2‐substituted‐benzothiazole, pyrrolo[3,4‐b ]benzo[1,5]tiazepine scaffolds with 2‐aminothiophenol and benzimidazo[2,1‐b ]pyrrolo[3,4‐e ]‐[1,3]thiazine scaffold with 2‐mercaptobenzimidazole.     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

Dimethyldioxirane as a new and effective oxidation agent for the epoxidation of α,ω‐di(isobutenyl)polyisobutylene: A convenient synthesis of α,ω‐di(2‐methyl‐3‐hydroxypropyl)‐polyisobutylene

The synthesis and characterization of α,ω‐di(2‐methyl‐2,3‐epoxypropyl)polyisobutylene are reported. The epoxidation of α,ω‐di(isobutenyl)polyisobutylene was achieved at room temperature with dimethyldioxirane, which proved to be a very effective reagent for epoxidation without the formation of byproducts. A very good agreement was found for the conversion determined by ¹H NMR and matrix‐assisted laser desorption/ionization mass spectrometry (MALDI HMS). The epoxy end groups were converted quantitatively into aldehyde termini with zinc bromide as a catalyst. The aldehyde groups were then reduced with LiAlH₄ into primary hydroxyl functions to obtain α,ω‐di(2‐methyl‐3‐hydroxylpropyl)polyisobutylene with high efficiency. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3974–3986, 2002     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002     

Synthesis of 6‐Alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine Derivatives via the Cyclization of N‐3‐Bromo‐3‐alkenylthioamides

By the treatment of N‐3‐bromo‐3‐alkenylthioamides with sodium hydroxide in DMF‐H₂O in the presence of tetra‐butylammonium bromide, series of 6‐alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine derivatives were prepared in moderate to good yields. The cyclization is supposed to proceed via both the intramolecular vinylic nucleophilic substitution and the elimination‐addition mechanisms (formation of acetylenic intermediates) in a competitive manner.     

Cp2ZrCl2‐catalyzed synthesis of 2‐substituted quinozolin‐4(3H)‐ones

Zirconocene dichloride (Cp₂ZrCl₂) in the presence of DMF was found to be a highly efficient catalyst for the synthesis of structurally diverse 2‐substituted quinozolin‐4(3H)‐ones by reaction of anthranilimide with a wide range of aryl aldehydes. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 2‐substituted‐2,3‐dihydro‐5‐benzoyl‐1H‐1,3,2‐benzodiazaphosphole 2‐oxides/sulfides

Syntheses of 2‐aryloxy/2‐chloro ethoxy‐2,3‐dihydro‐5‐benzoyl‐1H‐1,3,2‐benzodiaza‐phosphole 2‐oxides 3a–h were accomplished by reactions of equimolar quantities of 3,4‐diaminobenzophenone ( 1 ) with various aryl/chloroethoxy phosphorodichloridates 2a–g and 2h in the presence of triethylamine at 50–60°C. Compounds 3i–k were prepared by reacting 3,4‐diaminobenzophenone ( 1 ) with aryl thiophosphorodichloridates 2i–k under similar conditions. They were characterized by IR, ¹H, ¹³C, and ³¹P NMR spectral data. Some of these products possessed siginificant antimicrobial activity © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:340–345, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10044     

Isomer differentiation via collision‐induced dissociation: The case of protonated α‐, β2‐ and β3‐phenylalanines and their derivatives

A combination of electrospray ionisation (ESI), multistage and high‐resolution mass spectrometry experiments is used to examine the gas‐phase fragmentation reactions of the three isomeric phenylalanine derivatives, α‐phenylalanine, β²‐phenylalanine and β³‐phenylalanine. Under collision‐induced dissociation (CID) conditions, each of the protonated phenylalanine isomers fragmented differently, allowing for differentiation. For example, protonated β³‐phenylalanine fragments almost exclusively via the loss of NH₃, only β²‐phenylalanine via the loss of H₂O, while α‐ and β²‐phenylalanine fragment mainly via the combined losses of H₂O + CO. Density functional theory (DFT) calculations were performed to examine the competition between NH₃ loss and the combined losses of H₂O and CO for each of the protonated phenylalanine isomers. Three potential NH₃ loss pathways were studied: (i) an aryl‐assisted neighbouring group; (ii) 1,2 hydride migration; and (iii) neighbouring group participation by the carboxyl group. Finally, we have shown that isomer differentiation is also possible when CID is performed on the protonated methyl ester and methyl amide derivatives of α‐, β²‐ and β³‐phenylalanines. Copyright © 2010 John Wiley & Sons, Ltd.     

An activated catalyst RhH(PPh3)4‐dppe‐ Me2S2 for α‐methylthiolaton of α‐phenyl ketones

In the presence of catalytic amounts of RhH(PPh₃)₄, 1,2‐bis(diphenylphosphino)ethane (dppe), and dimethyl disulfide, cyclic and acyclic α‐phenyl ketones reacted with p‐cyano‐α‐methylthioa‐ cetophenone giving α‐methylthio‐α‐phenylketones. The activated catalyst containing dimethyl disulfide was effective for the α‐methylthiolation reaction of these less reactive substrates. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:18–23, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20650     

Lanthanide‐induced shifts in the structural elucidation of β‐hydroxydecalones

The use of Eu(fod)₃ in the analysis of the ¹H and ¹³C NMR spectra of cis and trans‐fused β‐hydroxydecalones is described. The relative configuration of the substituents is discussed using the PMLIS algorithm to determine the lanthanide (Eu) ion position in the complex in an effective axially symmetric model. The conformations of two cis‐decalones are also discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Zn(OAc)2•2H2O‐catalyzed synthesis of α‐aminophosphonates under neat reaction

A series of novel α‐aminophosphonates have been prepared by one‐pot three‐component condensation in the presence of a zinc acetate (Zn(OAc)_2•2H₂O) catalyst at 50°C under solvent‐free conditions with excellent yields. The major advantages of the present method are high yields, a short reaction time, and solvent‐free reaction conditions. Their antimicrobial activity was evaluated, and some of them showed significant activity. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 23:160–165, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20765     

Synthesis of novel N1‐(2‐furanidyl)‐5‐fluorouracil derivatives of α‐hydroxy(thio)phosphonates

Several N¹‐(2‐furanidyl)‐5‐fluorouracil derivatives of α‐hydroxythiophosphonates were synthesized via oxidation by Moffatt's method of N¹‐(2‐furanidyl)‐N³‐(hydroxyalkyl)‐5‐fluorouracil, followed by the addition of diethyl thiophosphite. The phosphonate products were obtained by the oxidation of the corresponding thiophosphonates with m‐chloroperoxybenzoic acid. The crystal structure of compound 6a was determined by X‐ray diffraction. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:211–215, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10021     

Palladium(II) acetate catalyzed efficient synthesis of N‐aryl‐α,β‐unsaturated amides via carbonylative addition of aniline derivatives to aromatic alkynes

A series of new N‐aryl‐α,β‐disubstituted amides (gem or E1; trans or E2) were synthesized in good yields by carbonylative addition of aniline derivatives 1a–f to aromatic alkynes 2a,b catalyzed by Pd(OAc)₂ and 1,3‐bis(diphenylphosphino)propane. The catalytic synthesis of tertiary α,β‐unsaturated amides was also successfully achieved. Traces of products were observed in the absence of p‐toluenesulfonic acid used as an additive. The reaction is sensitive to the type of phosphine ligand and solvent. Copyright © 2002 John Wiley & Sons, Ltd.     

Magnetic nanoparticle γ‐Fe2O3‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a highly recyclable and efficient nanocatalyst for the synthesis of α′‐oxindole‐α‐hydroxyphosphonates

Magnetic nanoparticle γ‐Fe₂O₃‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a novel magnetic nanocatalyst was synthesized and characterized. The nanoparticle reagent catalyzed efficiently the synthesis of α′‐oxindole‐α‐hydroxyphosphonates from isatins and dimethyl phosphate under solvent‐free conditions at 60 °C. More importantly, the catalyst could be easily recovered by an external magnet and reused six times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003