Dielectric Properties Investigation of Metal–Insulator–Metal (MIM) Capacitors

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al₂O₃/TiO₂/HfO₂ dielectric-film-based metal–insulator–metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al₂O₃-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm⁻², desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10⁻¹⁰ A·cm⁻², and quadratic voltage coefficient of 303.6 ppm·V⁻². Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm⁻² and 0.25 fF·µm⁻². Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole–Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.     

Rapid Identification for the Pterocarpus Bracelet by Three-Step Infrared Spectrum Method

In order to explore a rapid identification method for the anti-counterfeit of commercial high value collections, a three-step infrared spectrum method was used for the pterocarpus collection identification to confirm whether a commercial pterocarpus bracelet (PB) was made from the precious species of Pterocarpus santalinus (P. santalinus). In the first step, undertaken by Fourier transform infrared spectroscopy (FTIR) spectrum, the absorption peaks intensity of PB was slightly higher than that of P. santalinus only at 1594 cm⁻¹, 1205 cm⁻¹, 1155 cm⁻¹ and 836 cm⁻¹. In the next step of second derivative IR spectra (SDIR), the FTIR features of the tested samples were further amplified, and the peaks at 1600 cm⁻¹, 1171 cm⁻¹ and 1152 cm⁻¹ become clearly defined in PB. Finally, by means of two-dimensional correlation infrared (2DIR) spectrum, it revealed that the response of holocellulose to thermal perturbation was stronger in P. santalinus than that in PB mainly at 977 cm⁻¹, 1008 cm⁻¹, 1100 cm⁻¹, 1057 cm⁻¹, 1190 cm⁻¹ and 1214 cm⁻¹, while the aromatic functional groups of PB were much more sensitive to the thermal perturbation than those of P. santalinus mainly at 1456 cm⁻¹, 1467 cm⁻¹, 1518 cm⁻¹, 1558 cm⁻¹, 1576 cm⁻¹ and 1605 cm⁻¹. In addition, fluorescence microscopy was used to verify the effectiveness of the above method for wood identification and the results showed good consistency. This study demonstrated that the three-step IR method could provide a rapid and effective way for the anti-counterfeit of pterocarpus collections.     

Preparation and dielectric properties of highly preferred-(100) orientation (Pb,La)(Zr,Ti)O<Subscript>3</Subscript> antiferroelectric thick films by sol–gel processing

Pb_0.97La_0.02Zr_0.95Ti_0.05O₃ (PLZT) antiferroelectric thick films of highly preferred-(100) orientation with different thickness were successfully deposited on Pt(111)/Ti/SiO₂/Si(100) substrates depending on the sol–gel process technique. The effects of the PLZT thick films in the preparation and electric properties are investigated. The films show polycrystalline perovskite structure with a (100) preferred orientation by X-ray diffractometer analyses. The antiferroelectric nature of the thick films is demonstrated by P (polarization)–E (electric field). The temperature dependence of the dielectric constant and dielectric loss displays the similar behavior in both cases at 100 kHz while the values of polarization characteristic are decreased with the increase of the film thickness. The phase switching current are studied as a function of a gradually change dc electric field and the voltage dependent current density of the most highly (100)-oriented PLZT film is 1.49 × 10⁻⁸ A/cm² over electric field range from 0 to ±261 kV/cm. The film at 2,498 nm exhibits excellent dielectric properties and highly preferred-(100) orientation.     

Fabrication of Vertical-Standing Co-MOF Nanoarrays with 2D Parallelogram-like Morphology for Aqueous Asymmetric Electrochemical Capacitors

Metal organic frameworks (MOFs) have been considered as one of the most promising electrode materials for electrochemical capacitors due to their large specific surface area and abundant pore structure. Herein, we report a Co-MOF electrode with a vertical-standing 2D parallelogram-like nanoarray structure on a Ni foam substrate via a one-step solvothermal method. The as-prepared Co-MOF on a Ni foam electrode delivered a high area-specific capacitance of 582.0 mC cm⁻² at a current density of 2 mA cm⁻² and a good performance rate of 350.0 mC cm⁻² at 50 mA cm⁻². Moreover, an asymmetric electrochemical capacitor (AEC) device (Co-MOF on Ni foam//AC) was assembled by using the as-prepared Co-MOF on a Ni foam as the cathode and a active carbon-coated Ni foam as the anode to achieve a maximum energy density of 0.082 mW cm⁻² at a power density of 0.8 mW cm⁻², which still maintained 0.065 mW cm⁻² at a high power density of 11.94 mW cm⁻². Meanwhile, our assembled device exhibited an excellent cycling stability with a capacitance retention of nearly 100% after 1000 cycles. Therefore, this work provides a simple method to prepare MOF-based material for the application of energy storage and conversion.     

Magneto-thermal and dielectric properties of biferroic YCrO3 prepared by combustion synthesis

Microstructural, magnetothermal and dielectric properties of YCrO₃ powders prepared by combustion and solid state methods have been studied by a combination of XRD, specific heat, magnetization and permittivity measurements. The TEM and XRD characterization confirm that the combustion powders are amorphous plate-like agglomerates of nano-sized crystalline particles. A more uniform grain size along with an increase of the relative density is observed by SEM in the sintered samples prepared by combustion route with respect to those produced by solid state reaction. Similar to the material obtained through solid state synthesis, the material prepared by the combustion method also shows spin canted antiferromagnetic ordering of Cr⁺³ (S=3/2) at ∼140 K, which is shown by magnetization as well as λ-type anomaly in the total specific heat. Furthermore, the magnetic contribution to the total specific heat reveals spin fluctuations above T_N and a spin reorientation transition at about 60 K. Both YCrO₃ compounds show a diffuse phase transition at about 450 K, typical of a relaxor ferroelectric, which is characterized by a broad peak in the real part of the dielectric permittivity as a function of temperature, with the peak decreasing in magnitude and shifting to higher temperature as the frequency increases. The relaxor dipoles are due to the local non-centrosymmetric structure. Furthermore, the high loss tangent in a broad range of temperature as well as conductivity analysis indicates a hopping mechanism for the electronic conductivity as we believe it is a consequence of the outer d³-shell, which have detrimental effects on the polarization and the pooling process in the YCrO₃ bulk material. The more uniform particle size and higher density material synthesized through the combustion process leads to an improvement in the dielectric Properties.     

Vanadium-Substituted Dawson-Type Polyoxometalate–TiO2 Nanowire Composite Film as Advanced Cathode Material for Bifunctional Electrochromic Energy-Storage Devices

Polyoxometalates (POMs) demonstrate potential for application in the development of integrated smart energy devices based on bifunctional electrochromic (EC) optical modulation and electrochemical energy storage. Herein, a nanocomposite thin film composed of a vanadium-substituted Dawson-type POM, i.e., K₇[P₂W₁₇VO₆₂]·18H₂O, and TiO₂ nanowires were constructed via the combination of hydrothermal and layer-by-layer self-assembly methods. Through scanning electron microscopy and energy-dispersive spectroscopy characterisations, it was found that the TiO₂ nanowire substrate acts as a skeleton to adsorb POM nanoparticles, thereby avoiding the aggregation or stacking of POM particles. The unique three-dimensional core−shell structures of these nanocomposites with high specific surface areas increases the number of active sites during the reaction process and shortens the ion diffusion pathway, thereby improving the electrochemical activities and electrical conductivities. Compared with pure POM thin films, the composite films showed improved EC properties with a significant optical contrast (38.32% at 580 nm), a short response time (1.65 and 1.64 s for colouring and bleaching, respectively), an excellent colouration efficiency (116.5 cm² C⁻¹), and satisfactory energy-storage properties (volumetric capacitance = 297.1 F cm⁻³ at 0.2 mA cm⁻²). Finally, a solid-state electrochromic energy-storage (EES) device was fabricated using the composite film as the cathode. After charging, the constructed device was able to light up a single light-emitting diode for 20 s. These results highlight the promising features of POM-based EES devices and demonstrate their potential for use in a wide range of applications, such as smart windows, military camouflage, sensors, and intelligent systems.     

Preparation and Characterization of a Sol-Gel Prepared Ferroelectric Sandwich Structure

A novel silicon-based PbTiO₃/Pb(Zr,Ti)O₃/PbTiO₃ (PT/PZT/PT) sandwich structure has been prepared using a sol-gel method. The annealing temperature is greatly reduced compared with those structures without PT layers. Capacitance-voltage (C-V), leakage current-voltage (I-V), polarization-field (P-E), dielectric-frequency response and polarization fatigue of the sandwich structure are examined. The relative dielectric constant, the coercive field and the remanent polarization of the PZT films are measured to be about 900, 18 kV/cm and 16 C/cm² respectively. The current density is less than 5 × 10^–9 A/cm² below 200 kV/cm. The dielectric constant of the structure remains constant at low frequency, and decreases to some degree at high frequency. The retained polarization does not change significantly after 8 × 10⁹ read/write cycles. The PZT films are proved to have very good dielectric and ferroelectric properties. The new PT/PZT/PT sandwich structure can be valuable for memory devices and other applications.     

Module-Designed Carbon-Coated Separators for High-Loading,High-Sulfur-Utilization Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur batteries have great potential as next-generation energy-storage devices because of their high theoretical charge-storage capacity and the low cost of the sulfur cathode. To accelerate the development of lithium–sulfur technology, it is necessary to address the intrinsic material and extrinsic technological challenges brought about by the insulating active solid-state materials and the soluble active liquid-state materials. Herein, we report a systematic investigation of module-designed carbon-coated separators, where the carbon coating layer on the polypropylene membrane decreases the irreversible loss of dissolved polysulfides and increases the reaction kinetics of the high-loading sulfur cathode. Eight different conductive carbon coatings were considered to investigate how the materials’ characteristics contribute to the lithium–sulfur cell’s cathode performance. The cell with a nonporous-carbon-coated separator delivered an optimized peak capacity of 1112 mA∙h g⁻¹ at a cycling rate of C/10 and retained a high reversible capacity of 710 mA∙h g⁻¹ after 200 cycles under lean-electrolyte conditions. Moreover, we demonstrate the practical high specific capacity of the cathode and its commercial potential, achieving high sulfur loading and content of 4.0 mg cm⁻² and 70 wt%, respectively, and attaining high areal and gravimetric capacities of 4.45 mA∙h cm⁻² and 778 mA∙h g⁻¹, respectively.     

Preferential Co substitution on Ni sites in Ni–Fe oxide arrays enabling large-current-density alkaline oxygen evolution

Developing low-cost and high-activity transition metal oxide electrocatalysts for an efficient oxygen evolution reaction (OER) at a large current density is highly demanded for industrial application and remains a big challenge. Herein, we report vertically aligned cobalt doped Ni–Fe based oxide (Co–NiO/Fe₂O₃) arrays as a robust OER electrocatalyst via a simple method combining hydrothermal reaction with heat treatment. Density functional theory calculation and XRD Rietveld refinement reveal that Co preferentially occupies the Ni sites compared to Fe in the Ni–Fe based oxides. The electronic structures of the Co–NiO/Fe₂O₃ could be further optimized, leading to the improvement of the intrinsic electronic conductivity and d-band center energy level and the decrease in the reaction energy barrier of the rate-determining step for the OER, thus accelerating its OER electrocatalytic activity. The Co–NiO/Fe₂O₃ nanosheet arrays display state-of-the-art OER activities at a large current density for industrial demands among Fe–Co–Ni based oxide electrocatalysts, which only require an ultra-low overpotential of 230 mV at a high current density of 500 mA cm⁻², and exhibit superb durability at 500 mA cm⁻² for at least 300 h without obvious degradation. The Co–NiO/Fe₂O₃ nanosheet arrays also have a small Tafel slope of 33.9 mV dec⁻¹, demonstrating fast reaction kinetics. This work affords a simple and effective method to design and construct transition metal oxide based electrocatalysts for efficient water oxidation.

Co–NiO/Fe₂O₃ nanosheets featuring Co substitution on Ni sites can effectively regulate electronic structures and exhibit high OER activities with low overpotential (η₅₀₀ = 230 mV), small Tafel slope (33.9 mV dec⁻¹) and superb durability for 300 h.     

Pristine and Modified Porous Membranes for Zinc Slurry–Air Flow Battery

The membrane is a crucial component of Zn slurry–air flow battery since it provides ionic conductivity between the electrodes while avoiding the mixing of the two compartments. Herein, six commercial membranes (Cellophane™ 350PØØ, Zirfon^®, Fumatech^® PBI, Celgard^® 3501, 3401 and 5550) were first characterized in terms of electrolyte uptake, ion conductivity and zincate ion crossover, and tested in Zn slurry–air flow battery. The peak power density of the battery employing the membranes was found to depend on the in-situ cell resistance. Among them, the cell using Celgard^® 3501 membrane, with in-situ area resistance of 2 Ω cm² at room temperature displayed the highest peak power density (90 mW cm⁻²). However, due to the porous nature of most of these membranes, a significant crossover of zincate ions was observed. To address this issue, an ion-selective ionomer containing modified poly(phenylene oxide) (PPO) and N-spirocyclic quaternary ammonium monomer was coated on a Celgard^® 3501 membrane and crosslinked via UV irradiation (PPO-3.45 + 3501). Moreover, commercial FAA-3 solutions (FAA, Fumatech) were coated for comparison purpose. The successful impregnation of the membrane with the anion-exchange polymers was confirmed by SEM, FTIR and Hg porosimetry. The PPO-3.45 + 3501 membrane exhibited 18 times lower zincate ions crossover compared to that of the pristine membrane (5.2 × 10⁻¹³ vs. 9.2 × 10⁻¹² m² s⁻¹). With low zincate ions crossover and a peak power density of 66 mW cm⁻², the prepared membrane is a suitable candidate for rechargeable Zn slurry–air flow batteries.     

Photoelectrochemical water oxidation improved by pyridine N-oxide as a mimic of tyrosine-Z in photosystem II

Artificial photosynthesis provides a way to store solar energy in chemical bonds with water oxidation as a major challenge for creating highly efficient and robust photoanodes that mimic photosystem II. We report here an easily available pyridine N-oxide (PNO) derivative as an efficient electron transfer relay between an organic light absorber and molecular water oxidation catalyst on a nanoparticle TiO₂ photoanode. Spectroscopic and kinetic studies revealed that the PNO/PNO⁺˙ couple closely mimics the redox behavior of the tyrosine/tyrosyl radical pair in PSII in improving light-driven charge separation via multi-step electron transfer. The integrated photoanode exhibited a 1 sun current density of 3 mA cm⁻² in the presence of Na₂SO₃ and a highly stable photocurrent density of >0.5 mA cm⁻² at 0.4 V vs. NHE over a period of 1 h for water oxidation at pH 7. The performance shown here is superior to those of previously reported organic dye-based photoanodes in terms of photocurrent and stability.

Stable and high photocurrent for water oxidation was achieved by an organic dye-sensitized photoanode with a pyridine N-oxide derivative as an efficient electron relay between the chromophore and molecular water oxidation catalyst.     

Optimization of crystal packing in semiconducting spin-crossover materials with fractionally charged TCNQδ− anions (0 < δ < 1)

Co-crystallization of the prominent Fe(ii) spin-crossover (SCO) cation, [Fe(3-bpp)₂]²⁺ (3-bpp = 2,6-bis(pyrazol-3-yl)pyridine), with a fractionally charged TCNQ^δ− radical anion has afforded a hybrid complex [Fe(3-bpp)₂](TCNQ)₃·5MeCN (1·5MeCN, where δ = −0.67). The partially desolvated material shows semiconducting behavior, with the room temperature conductivity σ_RT = 3.1 × 10⁻³ S cm⁻¹, and weak modulation of conducting properties in the region of the spin transition. The complete desolvation, however, results in the loss of hysteretic behavior and a very gradual SCO that spans the temperature range of 200 K. A related complex with integer-charged TCNQ⁻ anions, [Fe(3-bpp)₂](TCNQ)₂·3MeCN (2·3MeCN), readily loses the interstitial solvent to afford desolvated complex 2 that undergoes an abrupt and hysteretic spin transition centered at 106 K, with an 11 K thermal hysteresis. Complex 2 also exhibits a temperature-induced excited spin-state trapping (TIESST) effect, upon which a metastable high-spin state is trapped by flash-cooling from room temperature to 10 K. Heating above 85 K restores the ground-state low-spin configuration. An approach to improve the structural stability of such complexes is demonstrated by using a related ligand 2,6-bis(benzimidazol-2′-yl)pyridine (bzimpy) to obtain [Fe(bzimpy)₂](TCNQ)₆·2Me₂CO (4) and [Fe(bzimpy)₂](TCNQ)₅·5MeCN (5), both of which exist as LS complexes up to 400 K and exhibit semiconducting behavior, with σ_RT = 9.1 × 10⁻² S cm⁻¹ and 1.8 × 10⁻³ S cm⁻¹, respectively.

Co-crystallization of the cationic complex [Fe(3-bpp)2]²⁺ with fractionally charged TCNQ^δ− anions (0 < δ < 1) affords semiconducting spin-crossover (SCO) materials. The abruptness of SCO is strongly dependent on the interstitial solvent content.     

An organic plastic ferroelectric with high Curie point

Plastic ferroelectrics, featuring large entropy changes in phase transitions, hold great potential application for solid-state refrigeration due to the electrocaloric effect. Although conventional ceramic ferroelectrics (e.g., BaTiO₃ and KNbO₃) have been widely investigated in the fields of electrocaloric material and catalysis, organic plastic ferroelectrics with a high Curie point (T_c) are rarely reported but are of great importance for the sake of environmental protection. Here, we reported an organic plastic ferroelectric, (−)-camphanic acid, which crystallizes in the P2₁ space group, chiral polar 2 (C₂) point group, at room temperature. It undergoes plastic paraelectric-to-ferroelectric phase transition with the Aizu notation of 23F2 and high T_c of 414 K, showing large entropy gain (ΔS_t = 48.2 J K⁻¹ mol⁻¹). More importantly, the rectangular polarization–electric field (P–E) hysteresis loop was recorded on the thin film samples with a large saturated polarization (P_s) of 5.2 μC cm⁻². The plastic phase transition is responsible for its multiaxial ferroelectric feature. This work highlights the discovery of organic multiaxial ferroelectrics driven by the motive of combining chirality and plastic phase transition, which will extensively promote the practical application of such unique functional materials.

An organic plastic ferroelectric, (−)-Camphanic acid, shows multiaxial ferroelectric feature and large entropy gain during the phase transition.     

In silico design to enhance the barrier height for magnetization reversal in Dy(iii) sandwich complexes by stitching them under the umbrella of corannulene

Lanthanide based single molecular magnets (SMMs), particularly dysprocenium based SIMs, are well known for their high energy barrier for spin reversal (U_eff) and blocking temperatures (T_B). Enhancing these two parameters and at the same time obtaining ambient stability is key to realising end-user applications such as compact storage or as qubits in quantum computing. In this work, by employing an array of theoretical tools (DFT, ab initio CASSCF and molecular dynamics), we have modelled six complexes [(η⁵-corannulene)Dy(Cp)] (1), [(η⁵-corannulene)Dy(C₆H₆)] (2), [(η⁶-corannulene)Dy(Cp)] (3), [(η⁶-corannulene)Dy(C₆H₆)] (4), [(exo-η⁵-corannulene)Dy(endo-η⁵-corannulene)] (5), and [(endo-η⁵-corannulene)Dy(endo-η⁵-corannulene)] (6) containing corannulene as a capping ligand to stabilise Dy(iii) half-sandwich complexes. Our calculations predict a strong axiality exerted by the Dy–C interactions in all complexes. Ab initio calculations predict a very large barrier height for all six molecules in the order 1 (919 cm⁻¹) ≈ 3 (913 cm⁻¹) > 2 (847 cm⁻¹) > 4 (608 cm⁻¹) ≈ 5 (603 cm⁻¹) ≈ 6 (599 cm⁻¹), suggesting larger barrier heights for Cp ring systems, followed by six-membered arene systems and then corannulene. DFT based molecular dynamics calculations were performed on complexes 3, 5 and 6. For complexes 3 and 5, the geometries that are dynamically accessible are far fewer. The range of U_eff computed for molecular dynamics snapshots is high, indicating a possibility of translating the large U_eff obtained into attractive blocking temperatures in these complexes, but the converse is found for 6. Furthermore, an in-depth C–H bond vibrational analysis performed on complex 3 suggests that the vibration responsible for reducing the blocking temperature in dysprocenium SIMs is absent here as the C–H bonds are stronger and corannulene steric strain prevents the C(Cp)–Dy–C(Cor) bending. As [(η⁶-corannulene)TM(X)]⁺ (TM = Ru, Zr, Os, Rh, Ir and X = C₅Me₅, C₆Me₆) are known, the predictions made here have a higher prospect of yielding stability under ambient conditions, a very large U_eff value and a high blocking temperature – a life-giving combination to new generation SMMs.

Bringing half-sandwich Dy(iii) SIMs under the umbrella of corannulene was found to offer stability, greater barrier height and may offer higher blocking temperatures.     

Low power threshold photochemical upconversion using a zirconium(iv) LMCT photosensitizer

The current investigation demonstrates highly efficient photochemical upconversion (UC) where a long-lived Zr(iv) ligand-to-metal charge transfer (LMCT) complex serves as a triplet photosensitizer in concert with well-established 9,10-diphenylanthracene (DPA) along with newly conceived DPA–carbazole based acceptors/annihilators in THF solutions. The initial dynamic triplet–triplet energy transfer (TTET) processes (ΔG ∼ −0.19 eV) featured very large Stern–Volmer quenching constants (K_SV) approaching or achieving 10⁵ M⁻¹ with bimolecular rate constants between 2 and 3 × 10⁸ M⁻¹ s⁻¹ as ascertained using static and transient spectroscopic techniques. Both the TTET and subsequent triplet–triplet annihilation (TTA) processes were verified and throughly investigated using transient absorption spectroscopy. The Stern–Volmer metrics support 95% quenching of the Zr(iv) photosensitizer using modest concentrations (0.25 mM) of the various acceptor/annihilators, where no aggregation took place between any of the chromophores in THF. Each of the upconverting formulations operated with continuous-wave linear incident power dependence (λ_ex = 514.5 nm) down to ultralow excitation power densities under optimized experimental conditions. Impressive record-setting η_UC values ranging from 31.7% to 42.7% were achieved under excitation conditions (13 mW cm⁻²) below that of solar flux integrated across the Zr(iv) photosensitizer''s absorption band (26.7 mW cm⁻²). This study illustrates the importance of supporting the continued development and discovery of molecular-based triplet photosensitizers based on earth-abundant metals.

The LMCT photosensitizer Zr(^MesPDP^Ph)₂ paired with DPA-based acceptors enabled low power threshold photochemical upconversion with record-setting quantum efficiencies.     

The Structural and Optical Properties of 1,2,4-Triazolo[4,3-a]pyridine-3-amine

The structural and spectroscopic properties of a new triazolopyridine derivative (1,2,4-triazolo[4,3-a]pyridin-3-amine) are described in this paper. Its FTIR spectrum was recorded in the 100–4000 cm⁻¹ range and its FT-Raman spectrum in the range 80–4000 cm⁻¹. The molecular structure and vibrational spectra were analyzed using the B3LYP/6-311G(2d,2p) approach and the GAUSSIAN 16W program. The assignment of the observed bands to the respective normal modes was proposed on the basis of PED calculations. XRD studies revealed that the studied compound crystallizes in the centrosymmetric monoclinic space group P2₁/n with eight molecules per unit cell. However, the asymmetric unit contains two 1,2,4-triazolo[4,3-a]pyridin-3-amine molecules linked via N–H⋯N hydrogen bonds with a R₂²(8) graph. The stability of the studied molecule was considered using NBO analysis. Electron absorption and the luminescence spectra were measured and discussed in terms of the calculated singlet, triplet, HOMO and LUMO electron energies. The Stokes shifts derived from the optical spectra were equal to 9410 cm⁻¹ for the triazole ring and 7625 cm⁻¹ for the pyridine ring.     

An electrically conductive metallocycle: densely packed molecular hexagons with π-stacked radicals

Electrical conduction among metallocycles has been unexplored because of the difficulty in creating electronic transport pathways. In this work, we present an electrocrystallization strategy for synthesizing an intrinsically electron-conductive metallocycle, [Ni₆(NDI-Hpz)₆(dma)₁₂(NO₃)₆]·5DMA·nH₂O (PMC-hexagon) (NDI-Hpz = N,N′-di(1H-pyrazol-4-yl)-1,4,5,8-naphthalenetetracarboxdiimide). The hexagonal metallocycle units are assembled into a densely packed ABCABC… sequence (like the fcc geometry) to construct one-dimensional (1D) helical π-stacked columns and 1D pore channels, which were maintained under the liberation of H₂O molecules. The NDI cores were partially reduced to form radicals as charge carriers, resulting in a room-temperature conductivity of (1.2–2.1) × 10⁻⁴ S cm⁻¹ (pressed pellet), which is superior to that of most NDI-based conductors including metal–organic frameworks and organic crystals. These findings open up the use of metallocycles as building blocks for fabricating conductive porous molecular materials.

Intrinsically electron-conductive metallocycle was synthesized. π-Radicals play a key role in constructing π-stacked columns among molecular hexagons and achieving high electrical conductivity over 10⁻⁴ S cm⁻¹ in polycrystalline pellet.     

Mixed-Valent Trinuclear CoIII-CoII-CoIII Complex with 1,3-Bis(5-chlorosalicylideneamino)-2-propanol

A mixed-valent trinuclear complex with 1,3-bis(5-chlorosalicylideneamino)-2-propanol (H₃clsalpr) was synthesized, and the crystal structure was determined by the single-crystal X-ray diffraction method at 90 K. The molecule is a trinuclear Co^III-Co^II-Co^III complex with octahedral geometries, having a tetradentate chelate of the Schiff-base ligand, bridging acetate, monodentate acetate coordination to each terminal Co³⁺ ion and four bridging phenoxido-oxygen of two Schiff-base ligands, and two bridging acetate-oxygen atoms for the central Co²⁺ ion. The electronic spectral feature is consistent with the mixed valent Co^III-Co^II-Co^III. Variable-temperature magnetic susceptibility data could be analyzed by consideration of the axial distortion of the central Co²⁺ ion with the parameters Δ = –254 cm⁻¹, λ = –58 cm⁻¹, κ = 0.93, tip = 0.00436 cm³ mol⁻¹, θ = –0.469 K, g_z = 6.90, and g_x = 2.64, in accordance with a large anisotropy. The cyclic voltammogram showed an irreversible reduction wave at approximately −1.2 V·vs. Fc/Fc⁺, assignable to the reduction of the terminal Co³⁺ ions.     

Application of Rhamnolipids as Dispersing Agents for the Fabrication of Composite MnO2-Carbon Nanotube Electrodes for Supercapacitors

The high theoretical capacitance of MnO₂ renders it a promising material for the cathodes of asymmetric supercapacitors. The good dispersion of MnO₂ and conductive additives in a nanocomposite electrode is a key factor for efficient electrode performance. This article describes, for the first time, the application of rhamnolipids (RL) as efficient natural biosurfactants for the fabrication of nanocomposite MnO₂-carbon nanotube electrodes for supercapacitors. RL act as co-dispersants for MnO₂ and carbon nanotubes and facilitate their efficient mixing, which allows for advanced capacitive properties at an active mass of 40 mg cm⁻² in Na₂SO₄ electrolytes. The highest capacitance obtained from the cyclic voltammetry data at a scan rate of 2 mV s⁻¹ is 8.10 F cm⁻² (202.6 F g⁻¹). The highest capacitance obtained from the galvanostatic charge–discharge data at a current density of 3 mA cm⁻² is 8.65 F cm⁻² (216.16 F g⁻¹). The obtained capacitances are higher than the capacitances of MnO₂-based electrodes of the same active mass reported in the literature. The approach developed in this investigation is simple compared to other techniques used for the fabrication of electrodes with high active mass. It offers advantages of using a biocompatible RL biosurfactant.     

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.