Synthesis of cationic diacetylene‐co‐carbazole‐co‐fluorene polymers and their sensitive fluorescent quenching properties with DNA

Two neutral precursor conjugated copolymers based 2,7‐diethynylfluorene and 3,6‐diethynylcarbazole units in the main chain ( PFC and PF2C ) were prepared by Hay coupling polymerization. Their cationic copolymers ( CPFC and CPF2C ) were prepared by the methylation of their diethylpropylamino groups with CH₃I. For comparison, neutral conjugated homopolymers of 2,7‐diethynylfluorene ( PF ), 3,6‐diethynylcarbazole units ( PC ) and their cationic polymers ( CPF and CPC ) were also prepared with the same method. A comparative study on the optical properties of cationic polymers CPFC and CPF2C in DMF and DMF/H₂O showed that they underwent water‐induced aggregation. The spectral behaviors of CPFC and CPF2C with calf thymus DNA showed that a distinct fluorescent quenching took place with minute addition of CT DNA (3.3 × 10^?13 M). The results showed that the polymers would be promising biosensor materials for sensitive detection of DNA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4168–4177, 2010     

Controlled co‐solvent vapor annealing and the importance of quenching conditions in thin‐film block copolymer self‐assembly

A controlled co‐solvent vapor annealing system was designed and constructed to investigate the effects of solvent vapor activity during the rapid ambient quenching process on the morphology of a cylinder‐forming poly(styrene)‐b‐poly (ethylene oxide) (PS‐PEO) annealed in toluene and water vapor. A phase transformation from cylinders in the bulk to close‐packed spheres in swollen thin films occurred, which was reversed upon quenching with dry nitrogen. Quenching with humidified nitrogen preserved the spherical morphology but could significantly alter domain spacing and reduce long‐range order in the dried films under some circumstances. Specifically, long‐range order in the quenched films was found to decrease as the quenching humidity decreased from the humidity used during annealing, and the best long‐range order was obtained when the humidity remained consistent throughout both annealing and quenching. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1125–1130     

Functionalized ZrP nanosheet with free‐radical quenching capability and its synergism in intumescent flame‐retardant polypropylene

The combination of catalyzing carbonization and free‐radical quenching mechanism is proposed to be a promising strategy for the preparation of high‐efficiency flame‐retardant polypropylene (PP). Herein, a novel functionalized zirconium phosphate (RQZrP) nanosheet with free‐radical quenching capability was fabricated by decorating macromolecular N‐alkoxy hindered amine (MNOR) onto the surface of ZrP. It was combined with an intumescent flame retardant (IFR) to flame‐retard PP. The results showed that there was a good synergism between RQZrP and IFR, which effectively improved the fire safety of PP. When the content of RQZrP was 2 wt% and IFR was 23 wt%, the limiting oxygen index (LOI) of PP increased from 19.0% to 33.0%, and it achieved a UL‐94 V‐0 rating. Meanwhile, the peak heat release rate (PHRR), total heat release (THR), carbon monoxide production (COP), and carbon dioxide production (CO₂P) were significantly decreased. It revealed that nitroxyl radicals generated by RQZrP could capture alkyl radicals and peroxy radicals that produced during the degradation and combustion of PP. Meanwhile, RQZrP acted as a solid acid that catalyzed PP chains rapidly cross‐linking to form char on its surface, and it also played as a supporting skeleton to enhance the strength and compactness of the char layer, thus effectively preventing the transmission of heat, oxygen, and combustible gases.     

Novel isoindigo‐based conjugated polyelectrolytes: Synthesis and fluorescence quenching behavior with water‐soluble poly(p‐phenylenevinylene)s

Two novel ID‐based water‐soluble conjugated polymers (+)‐PIDPV and (?)‐PIDPV were synthesized by Heck coupling reaction. These two polyelectrolytes are both consisted of isoindigo units and phenylenevinylene units. In the UV–vis absorption spectra, both (+)‐PIDPV and (?)‐PIDPV exhibit broad absorption bands that almost cover the whole visible region. Photophysical investigations reveal that the fluorescence of water‐soluble PPV can be efficiently quenched by oppositely charged PIDPV at a very low concentration. Cationic PPV shows an efficient quenching effect with Κ_SV = 1.01 × 10⁶ M^?1 in the presence of (?)‐PIDPV while the anionic PPV gives a lager quenching constant with Κ_SV = 1.71 × 10⁶ M^?1 in the presence of (+)‐PIDPV. Furthermore, the blend films of water‐soluble PPVs and oppositely charged PIDPV also exhibit excellent quenching effect. These properties suggest that (+)‐PIDPV and (?)‐PIDPV are promising materials in the application of ionic photoactive layer in the organic solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2223–2237     

Highly efficient quenching of nanoparticles for the detection of electron‐deficient nitroaromatics

Reported herein is the highly efficient quenching of fluorescent organic nanoparticles by 2,4‐dinitrotoluene and 2,4,6‐trinitrotoluene. These fluorescent nanoparticles are formed from the hydrophobic collapse of fluorescent polymer chains and display quenching efficiencies that are in line with the highest reported literature values. Moreover, the fluorescent quenching occurs only for the fluorescent nanoparticles, and not for the precursor polymer solutions, which display marked insensitivity to the presence of nitroaromatics. This aggregation‐dependent fluorescent quenching has numerous applications for the detection of small‐molecule electron‐deficient analytes. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4150–4155     

Theoretical explanation of the quenching of luminescence in cerium‐doped ytterbium oxyorthosilicate

A remarkable result in applied solid‐state physics is that whereas Ce‐doped yttrium oxyorthosilicate, Y₂(SiO₄)O:Ce, is an excellent scintillator, the related Ce‐doped ytterbium oxyorthosilicate, Yb₂(SiO₄)O:Ce, does not scintillate at all at room temperature. These compounds, Y and Yb, besides possessing the same crystal structure, both are trivalent and yield almost identical ionic radii. In order to understand the difference between the luminescent properties of these materials, we have performed an ab initio calculation to investigate the charge‐transfer mechanism involving their first excited states. By using a representative cluster model, a crossing is found between the ground and the excited state of the ytterbium compound, though not so in the yttrium compound. This suggests that in the solid state, the luminiscence quenching can occur via a nonradiative transition, although luminescence at low temperature might thus be feasible. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 79: 198–203, 2000     

Study on incomplete fluorescence quenching of cationic poly(p‐phenylenevinylene)s with different contents of cis‐ and trans‐vinylic linkages

Fluorescence properties of a series of cationic poly(p‐phenylenevinylene) (PPV) derivatives with different contents of cis‐ and trans‐vinylic linkages quenched by Fe(CN) were intensively investigated. PPVs with cis‐/trans‐vinylic linkages display downward Stern‐Volmer curves indicating incomplete quenching. The fluorescence quenching mechanism and the effect of many factors possible on the incomplete quenching has been examined, and the difference of the quenching behavior of two isomers was investigated, which further confirmed that the presence of cis‐vinylic linkages would most probably cause inaccessible fluorophores and thus the incomplete quenching. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of ω‐fluorenyl‐functionalized soluble polyphenylene: influence of polymer chain structure on photoluminescence quenching

The influence of the polymer chain structure of soluble polyphenylene (SPP) on the photoluminescence (PL) quenching of fluorene is strongly affected by the 1,2‐phenylene (1,2‐Ph)/1,4‐phenylene (1,4‐Ph) unit molar ratios of SPP, and the amount of 1,4‐Ph units is a major factor for PL quenching. The addition of the fluorenyl group by the formation of carbon–carbon bond at the polymer chain end of SPP is also an important factor for PL quenching of fluorene. Charge (electron) transfer from the fluorenyl end‐group to the main chain of ω‐fluorenyl‐functionalized SPP (FL‐SPP) was very efficient. UV/Vis and PL spectra suggested that this FL‐SPP may be useful for preparing an effective polymer photocell. Copyright © 2008 John Wiley & Sons, Ltd.     

Amphiphilic copolymers with pendant ­carbazolylalkyl groups. ­Effect of polymer structure on ­retardation of self‐quenching

A series of amphiphilic polyanions containing (9‐carbazolyl)alkyl methacrylamide or acrylamide were prepared and their fluorescence properties were compared in organic and aqueous solution. In organic solution, all copolymers exhibited a monomer emission which decayed exponentially, indicating no self‐quenching. Decreasing the length of the methylene spacer in the side chain induced the spectral broadening and sharpening, depending on the carbazolyl content in the copolymer. This may be related to the interchromophore interactions and the mobility of chromophores. In H ₂O, by contrast, quenched fluorescence was observed for the copolymers. It should be however noted that acrylamide‐type of amphiphilic copolymers, poly(9‐carbazolylmethyl‐acrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropanesulfonate), are the least quenched polymers among those reported so far. Copyright © 2001 John Wiley & Sons, Ltd.     

Morphology and nonisothermal crystallization of in situ microfibrillar poly(ethylene terephthalate)/polypropylene blend fabricated through slit‐extrusion,hot‐stretch quenching

This study describes the morphology and nonisothermal crystallization kinetics of poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) in situ micro‐fiber‐reinforced blends (MRB) obtained via slit‐extrusion, hot‐stretching quenching. For comparison purposes, neat PP and PET/PP common blends are also included. Morphological observation indicated that the well‐defined microfibers are in situ generated by the slit‐extrusion, hot‐stretching quenching process. Neat iPP and PET/iPP common blends showed the normal spherulite morphology, whereas the PET/iPP microfibrillar blend had typical transcrystallites at 1 wt % PET concentration. The nonisothermal crystallization kinetics of three samples were investigated with differential scanning calorimetry (DSC). Applying the theories proposed by Jeziorny, Ozawa, and Liu to analyze the crystallization kinetics of neat PP and PET/PP common and microfibrillar blends, agreement was found between our experimental results and Liu's prediction. The increases of crystallization temperature and crystallization rate during the nonisothermal crystallization process indicated that PET in situ microfibers have significant nucleation ability for the crystallization of a PP matrix phase. The crystallization peaks in the DSC curves of the three materials examined widened and shifted to lower temperature when the cooling rate was increased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 374–385, 2004     

Fluorescence quenching study of humic‐fraction‐modified silica gel in a solid state after association with a variety of pesticidal analytes in hexane and acetonitrile

In this paper, we investigate the fluorescence quenching of acidic humic‐fraction‐modified silica gel in the solid state after association with a variety of pesticidal analytes in hexane and acetonitrile. The percentage of fluorescence quenching is found to be dependent on the contact time and linearly on the number of moles of analyte involved in the association process. However, any π–π complexation interaction arising from the acidic aromatic ring on the analyte due to the derivatization of a bulky electron‐withdrawing group is not observed. Also, any mechanism leading to adsorption or any quenching process occurring as a result of the steric hindrance obtained by a theoretical interaction simulation is not observed. The Fourier transform infrared (FTIR) data and simulation results, instead, suggest that electron‐rich atoms on the analyte, such as oxygen, sulfur, nitrogen, and phosphorus, are responsible for fluorescence quenching, following dipole–dipole interaction with the humic‐fraction‐modified adsorbent.     

rac‐5‐Diphenylacetyl‐2,2,4‐trimethyl‐2,3,4,5‐tetrahydro‐1,5‐benzothiazepine and rac‐5‐formyl‐2,2,4‐trimethyl‐2,3,4,5‐tetrahydro‐1,5‐benzothiazepine

rac‐5‐Diphenylacetyl‐2,2,4‐trimethyl‐2,3,4,5‐tetrahydro‐1,5‐benzothiazepine, C₂₆H₂₇NOS, (I), and rac‐5‐formyl‐2,2,4‐trimethyl‐2,3,4,5‐tetrahydro‐1,5‐benzothiazepine, C₁₃H₁₇NOS, (II), are both characterized by a planar configuration around the heterocyclic N atom. In contrast with the chair conformation of the parent benzothiazepine, which has no substituents at the heterocyclic N atom, the seven‐membered ring adopts a boat conformation in (I) and a conformation intermediate between boat and twist‐boat in (II). The molecules lack a symmetry plane, indicating distortions from the perfect boat or twist‐boat conformations. The supramolecular architectures are significantly different, depending in (I) on C—H...O interactions and intermolecular S...S contacts, and in (II) on a single aromatic π–π stacking interaction.     

O‐Benzyl‐N‐tert‐butoxy­carbonyl‐N‐methyl‐l‐tyrosine

The crystal structure of the title compound, alternatively called 3‐[4‐(benzyl­oxy)­phenyl]‐2‐(N‐tert‐butoxy­car­bonyl‐N‐methyl­amino)­propi­onic acid, C₂₂H₂₇NO₅, has been studied in order to ex­amine the role of N‐methyl­ation as a determinant of peptide conformation. The conformation of the tert‐butoxy­carbonyl group is trans–trans. The side chain has a folded conformation and the two phenyl rings are effectively perpendicular to one another. The carboxyl­ate hydroxyl group and the urethane carbonyl group form a strong intermolecular O—H?O hydrogen bond.     

5‐Acetyl‐2‐amino‐6‐methyl‐4‐phenyl‐4H‐pyran‐3‐carbonitrile and 2‐amino‐5‐benzoyl‐6‐methyl‐4‐phenyl‐4H‐pyran‐3‐carbonitrile acetonitrile solvate

The syntheses, X‐ray structural investigations and calculations of the conformational preferences of the carbonyl substituent with respect to the pyran ring have been carried out for the two title compounds, viz. C₁₅H₁₄N₂O₂, (II), and C₂₀H₁₆N₂O₂·C₂H₃N, (III), respectively. In both mol­ecules, the heterocyclic ring adopts a flattened boat conformation. In (II), the carbonyl group and a double bond of the heterocyclic ring are syn, but in (III) they are anti. The carbonyl group forms a short contact with a methyl group H atom in (II). The dihedral angles between the pseudo‐axial phenyl substituent and the flat part of the pyran ring are 92.7 (1) and 93.2 (1)° in (II) and (III), respectively. In the crystal structure of (II), inter­molecular N—H⋯N and N—H⋯O hydrogen bonds link the mol­ecules into a sheet along the (103) plane, while in (III), they link the mol­ecules into ribbons along the a axis.     

4‐Ethynyl‐4‐hydroxycyclohexan‐1‐one and 4‐ethynyl‐4‐hydroxy‐2,3,5,6‐tetramethylcyclohexa‐2,5‐dien‐1‐one

The title compounds, C₈H₁₀O₂, (I), and C₁₂H₁₄O₂, (II), occurred as by‐products in the controlled synthesis of a series of bis­(gem‐alkynols), prepared as part of an extensive study of synthon formation in simple gem‐alkynol derivatives. The two 4‐(gem‐alkynol)‐1‐ones crystallize in space group P2₁/c, (I) with Z′ = 1 and (II) with Z′ = 2. Both structures are dominated by O—H?O=C hydrogen bonds, which form simple chains in the cyclo­hexane derivative, (I), and centrosymmetric dimers, of both symmetry‐independent mol­ecules, in the cyclo­hexa‐2,5‐diene, (II). These strong synthons are further stabilized by C[triple‐bond]C—H?O=C, C_methylene—H?O(H) and C_methyl—H?O(H) interactions. The direct intermolecular interactions between donors and acceptors in the gem‐alkynol group, which characterize the bis­(gem‐alkynol) analogues of (I) and (II), are not present in the ketone derivatives studied here.     

Neue molekulare Indium‐Zinn‐Sauerstoff‐ und Indium‐Zinn‐Natrium‐Sauerstoff‐Chlor‐Cluster

Abstract. The five‐membered heteroelement cluster THF · Cl₂In(O^tBu)₃Sn reacts with the sodium stannate [Na(O^tBu)₃Sn]₂ to produce either the new oxo‐centered alkoxo cluster ClInO[Sn(O^tBu)₂]₃ ( 1 ) (in low yield) or the heteroleptic alkoxo cluster Sn(O^tBu)₃InCl₃Na[Sn(O^tBu)₂]₂ ( 2 ). X‐ray diffraction analyses reveal that in compound 1 the polycyclic entity is made of three tin atoms which together with a central oxygen atom form a trigonal, almost planar triangle, perpendicular to which a further indium atom is connected through the oxygen atom. The metal atoms thus are arranged in a Sn₃In pyramid, the edges of which are all saturated by bridging tert‐butoxy groups. The indium atom has a further chloride ligand. Compound 2 has two trigonal bipyramids as building blocks which are fused together at a six coordinate indium atom. One of the bipyramids is of the type SnO₃In with tert‐butyl groups on the oxygen atoms, while the other has the composition InCl₃Na with chlorine atoms connecting the two metals. The sodium atom in 2 has further contacts to two plus one alkoxide groups which are part of a[Sn(O^tBu)₂]₂ dimer disposing of a Sn₂O₂ central cycle. The hetero element cluster in 2 thus combines three closed entities and its skeleton SnO₃InCl₃NaO₂Sn₂O₂ consists of three different metallic and two different non‐metallic elements.     

4‐Acetyl‐5‐methyl‐2‐phenyl‐1,2‐di­hydro‐3H‐pyrazol‐3‐one hydrate

The title compound, C₁₂H₁₂O₂N₂·H₂O, is described. Although the keto–enol form of the ligand in solution is known, the compound crystallized in the orthorhombic space group P2₁2₁2₁ with only the monohydrated 1,3‐diketo form. The intermolecular hydrogen bond between the imino N—H group of the ligand and O atom of the water mol­ecule recorded an H?O distance of 1.73 (3) Å.     

Enantioselective Synthesis of Ethyl 4,5,7,8,9‐Penta‐O‐acetyl‐2,6‐anhydro‐ 3‐deoxy‐D‐erythro‐L‐gluca‐nononate: a 2‐Monodeoxygenated Derivative of `2‐Keto‐3‐deoxy‐D‐glycero‐D‐galacto‐nononic Acid'

A study aimed at developing an enantioselective synthesis of the title compound 23 , a 2‐monodeoxy analogue of the naturally occurring (+)‐2‐keto‐3‐deoxy‐D ‐glycero‐D ‐galacto‐2‐nononic acid (KDN), is reported. From D ‐mannose as starting material, the chiral 1,3‐diene 10 , activated by a silyloxy substituent at C(2), was prepared in six steps (Scheme 1). However, the intermediates were often contaminated with varying amounts of by‐products arising from overoxidation during cleavage with periodic acid. An alternative route starting from the inexpensive and readily available D ‐isoascorbic acid ( 12 ), though a little longer than the first, satisfactorily circumvented the purification problem and led to the desired dienes 17 in good yields (scheme 2). The [Co^II(S,S)‐(+)‐salen]‐catalyzed hetero‐Diels‐Alder reactions of the aforementioned dienes with ethyl glyoxylate proceeded smoothly at room temperature, giving the dihydropyrano adducts 18 in moderate yields (Scheme 3). Dihydroxylation of 18a followed by reduction of the keto function gave the desired 4,5‐trans dihydroxy moiety of the KDN framework (Scheme 4, see 21 ). The spectroscopic data of the penta‐O‐acetylated 2‐deoxy‐KDN ethyl ester 23 were consistent with those reported for the corresponding methyl ester derived from natural KDN.     

Piperidinium 3‐[(4‐hydroxy‐5,7‐di­methyl‐2‐oxo‐2H‐chromen‐3‐yl)­phenyl­methyl]‐5,7‐di­methyl‐2‐oxo‐2H‐chromen‐4‐olate

In the title salt, C₅H₁₂N⁺·C₂₉H₂₃O₆^?, both benzo­pyran systems are planar. Intermolecular N—H?O hydrogen bonds and a short O—H?O intramolecular hydrogen bond are observed in the structure.