Isolation and Structural Characterization of Di‐ and Tetra‐protonated Forms of the Macrocyclic Hexaamine trans‐6,13‐Dimethyl‐1,4,8‐11‐tetraazacyclodecane‐6,13‐diamine

Cations derived by protonation of the ligand title compound (L¹) have been structurally characterized in their di‐ and tetra‐ protonated forms in the salts [H₂L¹][ClO₄]₂·2H₂O and [H₄L¹][ZnCl₄]₂·4H₂O. In both structures, one half of the formula unit comprises the asymmetric unit of the structure, the macrocycle being centrosymmetric, with the two macrocycles adopting similar conformations. In both salts, a pair of diagonally opposed macrocyclic secondary amine groups are protonated; in the [H₄L¹]⁴⁺ salt, the additional pair of protons are accommodated on the exocyclic pendant amine groups. The dispositions of the pendent amines differ between the two structures, being ‘equatorial’ with respect to the macrocyclic ring in the [H₂L¹]²⁺ salt, and ‘axial’ in the [H₄L¹]⁴⁺ salt. In other structurally characterized compounds containing [H₄L¹]⁴⁺ the equatorial disposition was found in the ferricyanide adduct, while in the tetraperchlorate salt the axial disposition was identified. The differences in disposition of the exocyclic groups are ascribed to the extensive H‐bonding in the lattices.     

Synthesis of Macrocyclic Lactones via Ring Transformation of 4‐(ω‐Hydroxyalkyl)‐1,3‐oxazol‐5(4H)‐ones

The synthesis of α‐benzamido‐α‐benzyl lactones 23 of various ring size was achieved either via ‘direct amide cyclization’ by treatment of 2‐benzamido‐2‐benzyl‐ω‐hydroxy‐N,N‐dimethylalkanamides 21 in toluene at 90 – 110° with HCl gas or by ‘ring transformation’ of 4‐benzyl‐4‐(ω‐hydroxyalkyl)‐2‐phenyl‐1,3‐oxazol‐5(4H)‐ones under the same conditions. The precursors were obtained by C‐alkylations of 4‐benzyl‐2‐phenyl‐1,3‐oxazol‐5(4H)‐one ( 15 ) with THP‐ or TBDMS‐protected ω‐hydroxyalkyl iodides. Ring opening of the THP‐protected oxazolones by treatment with Me₂NH followed by deprotection of the OH group gave the diamides 21 , whereas deprotection of the TBDMS series of oxazolones 25 with TBAF followed by treatment with HCl gas led to the corresponding lactones 23 in a one‐pot reaction.     

Heterometallic Polynuclear Complexes of Macrocyclic ­Oxamide with Pyrazine‐2, 3‐dicarboxylic Acid: Synthesis,Crystal Structure,and Magnetic Properties

Three novel complexes, namely [Zn(CuL)(pzdc)]₂ · 5H₂O ( 1 ), [Zn(NiL)(pzdc)]₂ · 5H₂O ( 2 ), and [Gd₂(pzdc)₂(NiL)₆](ClO₄)₂ · 6H₂O ( 3 ) (CuL and NiL, H₂L = 2, 3‐dioxo‐5, 6, 14, 15‐dibenzo‐1, 4, 8, 12‐tetraazacyclo‐pentadeca‐7, 13‐dien and H₂pzdc = pyrazine‐2, 3‐dicarboxylic acid) were synthesized and structurally determined. Complexes 1 and 2 are tetranuclear [Zn^II₂M^II₂] (M = Ni ( 1 ), Cu ( 2 ), respectively) molecules including both oxamide and pzdc^2– bridges. The structure of compound 3 consists of pyrazine‐2, 3‐dicarboxylate and oxamido‐bridged, and is arranged in different butterfly‐like octanuclear molecules. The magnetic susceptibility data of 3 were analyzed.     

Synthesis,psychotropic and anticancer activity of 2,2‐dimethyl‐5‐[5′‐trialkylgermyl(silyl)‐2′‐hetarylidene]‐1,3‐dioxane‐4,6‐diones and their analogues

A series of 2,2‐dimethyl‐5‐(5′‐R‐hetarylidene)‐1,3‐dioxane‐4,6‐diones has been synthesized for examing a structure–activity relationship. Furyl and thienyl derivatives of Meldrum's acid possess neurotropic activity comprising both depriming and activating components. Comparison of acute toxicity of carbon, silicon and germanium analogues in the furan series of the compounds has demonstrated that the germanium derivative is 11.5 times less toxic than the carbon analogue and four times less toxic than the silicon derivative. 2,2‐Dimethyl‐5‐(5′‐triethylsilyl‐2′‐thenylidene)‐1,3‐dioxane‐4,6‐dione has moderate toxicity with the highest neurotropic and cytotoxic activity Copyright © 2003 John Wiley & Sons, Ltd.     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Highly Diastereoselective Total Syntheses of (+)‐7‐Epigoniodiol, (−)‐8‐Epigoniodiol,and (+)‐9‐Deoxygoniopypyrone

An expedient concise total synthesis of (+)‐7‐epigoniodiol, (?)‐8‐epigoniodiol, and (+)‐9‐deoxygoniopypyrone is accomplished. The key transformations include a catalytic hydroxylation and base‐mediated N‐(acetyl)oxazolidinone addition reactions, which could set the consecutive OH motif that is either syn,syn or syn,anti with high diastereoselectivity. Moreover, this approach envisioned to facilitate the synthesis of other representatives of the family with structural and stereochemical variation.     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

Macrocyclic 2,7‐Anthrylene Oligomers

A macrocyclic compound consisting of six 2,7‐anthrylene units was successfully synthesized by Ni‐mediated coupling of the corresponding dibromo precursor as a novel π‐conjugated compound. This compound was sufficiently stable and soluble in organic solvents due to the presence of mesityl groups. X‐ray analysis showed that the molecule had a nonplanar and hexagonal wheel‐shaped framework of approximately S₆ symmetry. The dynamic process between two S₆ structures was observed by using the dynamic NMR technique, the barrier being 58 kJ mol^?1. The spectroscopic properties of the hexamer were compared with those of analogous linear oligomers.     

Transition‐metal‐catalyzed reactions of 5‐methylene‐2‐oxazolidinone and 5‐methylene‐1,3‐thiazolidine‐2‐thione with isocyanates

5‐Methylene‐2‐oxazolidinone (1) and 5‐methylene‐1,3‐thiazolidine‐2‐thione (4) react with various isocyanates to give the corresponding urethanes 3 and 5 in high yields in the presence of palladium(0) or palladium(II) catalyst under mild reaction conditions. A mechanism is proposed. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 2‐Mercaptobenzaldehyde, 2‐Mercaptocyclohex‐1‐enecarboxaldehydes and 3‐Mercaptoacrylaldehydes

A novel one‐pot approach for the preparation of 2‐mercaptobenzaldehyde, 2‐mercaptocyclohex‐1‐enecarboxaldehydes and 3‐mercaptoacrylaldehydes [(Z)‐3‐mercapto‐2‐methyl‐3‐phenylacrylaldehyde, 3‐mercapto‐3‐(o‐tolyl)acrylaldehyde)] starting from ortho‐bromobenzaldehyde, 2‐chlorocyclohex‐1‐enecarbaldehydes, (Z)‐3‐chloro‐2‐methyl‐3‐phenylacrylaldehyde and 3‐chloro‐3‐(o‐tolyl)acrylaldehyde is reported. The reaction of sulfur with the Grignard reagent of the acetal for the protection of the aldehyde group affords the title compounds through hydrolysis with dilute hydrochloric acid in high yields.     

Synthesis and Crystal Structure of 3,3,6,6‐Tetramethylmorpholine‐2,5‐dione,and Its 5‐Monothioxo and 2,5‐Dithioxo Derivatives

The synthesis of 3,3‐dimethylmorpholine‐2,5‐diones 4a was achieved conveniently via the ‘direct amide cyclization’ of the linear precursors of type 3 , which were prepared by coupling of 2,2‐dimethyl‐2H‐azirin‐3‐amines 2 with 2‐hydroxyalkanoic acids 1 . Thionation of 4a with Lawesson's reagent yielded the corresponding 5‐thioxomorpholin‐2‐ones 10 and morpholine‐2,5‐dithiones 11 , respectively, depending on the reaction conditions. The structures of 3aa, 4aa, 10a , and 11a were established by X‐ray crystallography. All attempts to prepare S‐containing morpholine‐2,5‐dione analogs or thiomorpholine‐2,5‐diones by cyclization of corresponding S‐containing precursors were unsuccessful and led to various other products. The structures of some of them have also been established by X‐ray crystallography.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007