Preparation of Magnetite Nanoparticles Coated with an Amphiphilic Block Copolymer: A Potential Drug Carrier with a Core‐Shell‐Corona Structure for Hydrophobic Drug Delivery

Summary: The synthesis of magnetic magnetite nanoparticles coated with amphiphilic block copolymers of poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) for use as new potential carriers for hydrophobic drug delivery is reported. The results show that a new core‐shell‐corona structural material is obtained with a very narrow molecular weight distribution of the hydrophobic segment (PDI = 1.10). UV‐Vis results show that 37% of progesterone is released from the nanoparticles after 22 h, much slower than free release (99% after 14 h), which demonstrates that the presence of the hydrophobic segment can effectively control the release of hydrophobic drugs.

Synthesis of an amphiphilic block polymer poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) on magnetite nanoparticles and their use as potential drug carriers     

pH/Thermosensitive Hydrogels Formed at Low pH by a PMMA‐PAA‐P2VP‐PAA‐PMMA Pentablock Terpolymer

A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.

     

Enhancement of Photostability in Blue‐Light‐Emitting Polymers Doped with Gold Nanoparticles

A dramatic increase in the photostability of a blue‐light‐emitting polymer, poly(9,9‐dioctylfluorene), was achieved by the addition of 5–10 nm gold nanoparticles. The optical absorption band of the gold nanoparticles was tuned to resonate the triplet exciton ground state bandgap energy of the polymer. Photo‐oxidation rate of poly(9,9‐dioctylfluorene) was effectively reduced by doping the polymer with very small amounts (≈10⁻⁶–10⁻⁵ volume fraction) of the gold nanoparticles.

Retarded photo‐oxidation in PDOF nanocomposite films with various doped gold nanoparticles.     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Stable Aqueous Dispersion of PEGylated Nanoparticles by Polyelectrolyte Complex Formation

Stable aqueous dispersions of nanoparticles were prepared by polyelectrolyte complex formation between well‐defined poly(ethylene glycol)‐block‐poly(2‐acrylamido‐2‐methyl‐1‐propane sodium sulfonate) and poly(ethylene glycol)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] diblock copolymers. Controlled synthesis of the copolymers was achieved by water‐based atom transfer radical polymerization (ATRP). The nanoparticles were characterized by a quite narrow and monomodal size distribution as evidenced by dynamic light scattering (DLS) and confirmed by atomic force microscopy (AFM) after solution casting and freeze‐drying.

     

Effect of the Molecular Weight of AB Diblock Copolymers on the Lamellar Orientation in Thin Films: Theory and Experiment

We propose a theoretical explanation of the parallel and perpendicular lamellar orientations in free surface films of symmetric polystyrene‐block‐polybutadiene diblock copolymers on silicon substrates (with a native SiO_x layer). Two approaches are developed: A correction to the strong segregation theory and a qualitative analysis of the intermediate segregation regime. We show that the perpendicular orientation of the lamellae formed by the molecules of high molecular weight is stabilized by A–B interfacial interactions. They are weaker in the case of the perpendicular orientation of the lamellae, whereas the surface tension coefficient of the A–B interface decreases with the increase of the molecular weight.

     

Synthesis of Multiblock Polymer Containing Narrow Polydispersity Blocks

Summary: We have developed a new strategy to prepare multiblock polymers and copolymers via one‐ or two‐step polymerization using a polymerizable cyclic trithiocarbonate (CTTC), 4,7‐diphenyl‐[1,3]dithiepane‐2‐thione. CTTC undergoes ring‐opening process to incorporate a trithiocarbonate moiety. The trithiocarbonate moiety in turn, functions as a reversible addition fragmentation chain transfer (RAFT) agent. Through this mechanism, multiblock polystyrenes and polystyrene‐block‐ poly(butyl acrylate) copolymers containing various narrow polydispersity blocks can be prepared.

Integrated process of ring‐opening and RAFT polymerizations involving cyclic trithiocarbonates.     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

High‐Throughput Screening of Mechanical Properties on Temperature‐Gradient Polyurethaneurea Libraries

Combinatorial libraries of segmented polyurethaneurea with gradients in curing temperature were prepared and characterized using a novel high‐throughput mechanical instrument. Stress/strain profiles were taken at different temperature positions on the libraries, and a structure/property relationship between microstructure and mechanical properties was established by correlating the measured strength and strain at break to high‐throughput AFM and FT‐IR measurements on the same library. These results demonstrate the feasibility of rapid and accurate screening of mechanical properties, and their correlation to structure, by using gradient combinatorial polymer libraries.

Impact energy/thickness and elongation at break versus cure T for a T‐gradient SPUU library.     

Reversible Photocontrolled Swelling‐Shrinking Behavior of Micron Vesicles Self‐Assembled from Azopyridine‐Containing Diblock Copolymer

Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐pyridyazo)phenoxy] hexylmethacrylate} (PNIPAM‐b‐PAzPy) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In a water/tetrahydrofuran (H₂O/THF) mixture, amphiphilic PNIPAM‐b‐PAzPy self‐assembles into giant micro‐vesicles. Upon alternate ultraviolet (UV) and visible light irradiation, obvious reversible swelling‐shrinking of the vesicles was observed directly under an optical microscope. The maximum percentage increase in volume, caused by the UV light, reached 17%. Moreover, the swelling could be adjusted using the UV light power density. The derivation of this effect is due to photoinduced reversible isomerization of azopyridine units in the vesicles.

     

Novel One‐Step Route for Preparing Amphiphilic Block Copolymers of Styrene and N‐Isopropylacrylamide in a Microemulsion

Summary: Copolymerizations of St and NIPAM have been carried out through interfacial‐initiated microemulsion polymerization in a frozen state. FT‐IR and NMR spectroscopies confirm the occurrence of copolymerization between the two monomers. DSC analysis shows the existence of two glass transition temperatures of the resultant copolymers. The micellization of the copolymers is investigated by DLS and the temperature‐responsive behavior of the resultant micelles is observed. DSC and DLS results reveal the block feature of the obtained copolymers. Thus amphiphilic poly(styrene‐block‐N‐isopropylacrylamide) is prepared by a one‐step interfacial‐initiated microemulsion polymerization.

Hydrodynamic radius of the micellar particles formed by (left), and a typical DSC trace of (right), the poly(styrene‐block‐N‐isopropylacrylamide) prepared here.     

Horseradish Peroxidase as a Catalyst for Atom Transfer Radical Polymerization

The hemoprotein horseradish peroxidase (HRP) catalyzes the polymerization of N‐isopropylacrylamide with an alkyl bromide initiator under conditions of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) in the absence of any peroxide. This is a novel activity of HRP, which we propose to name ATRPase activity. Bromine‐terminated polymers with polydispersity indices (PDIs) as low as 1.44 are obtained. The polymerization follows first order kinetics, but the evolution of molecular weight and the PDI upon increasing conversion deviate from the results expected for an ATRP mechanism. Conversion, and PDI depend on the pH and on the concentration of the reducing agent, sodium ascorbate. HRP is stable during the polymerization and does not unfold or form conjugates.

     

Polyoxazoline Thermoresponsive Micelles as Radionuclide Delivery Systems

Thermoresponsive polymer micelles are promising drug and radionuclide carriers with a strong passive targeting effect into solid tumors. We have synthesized ABA triblock copolymers poly[2‐methyl‐2‐oxazoline‐block‐(2‐isopropyl‐2‐oxazoline‐co‐2‐butyl‐2‐oxazoline)‐block‐2‐methyl‐2‐oxazoline]. These polymers are molecularly dissolved in aqueous millieu below the cloud point temperature (CPT) of the thermoresponsive central block and above CPT form polymer micelles at CMC 5–10 × 10^?5 g · mL^?1 with diameter ≈200 nm. The phenolic moiety introduced into the copolymer allowed radionuclide labeling with iodine‐125 ongoing in good yield with sufficient in vitro stability under model conditions.

     

The Self‐Assembled Structure of the Diblock Copolymer PCL‐b‐P4VP Transforms Upon Competitive Interactions with Octaphenol Polyhedral Oligomeric Silsesquioxane

This paper describes the miscibility and self‐assembly, mediated by hydrogen‐bonding interactions, of new block copolymer/nanoparticle blends. The morphologies adopted by the immiscible poly[(ε‐caprolactone)‐block‐(4‐vinyl pyridine)] (PCL‐b‐P4VP) diblock copolymer changes upon increasing the number of competitive hydrogen‐bonding interactions after adding increasing amounts of octaphenol polyhedral oligomeric silsesquioxane (OP‐POSS). Transmission electron microscopy reveals morphologies that exhibit high degrees of long‐range order, such as cylindrical and spherical structures, at relatively low OP‐POSS contents, and short‐range order or disordered structures at higher OP‐POSS contents. Analyses performed using differential scanning calorimetry, wide‐angle X‐ray diffraction, and FT‐IR spectroscopy provide positive evidence that the pyridyl units of the P4VP block are significantly stronger hydrogen‐bond acceptors toward the OH group of OP‐POSS than are the CO groups of the PCL block, thereby resulting in excluded and confined PCL phases.

     

Electromechanical Response of Nanostructured Polymer Systems with no Mechanical Pre‐Strain

A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.

     

Kinetic Analysis of A2 + AB2 Polymerization Approach

The kinetic model of the co‐polycondensation with A₂ and AB₂ type monomers is developed and the analytical expressions of the various molecular parameters of the products are derived rigorously. The monomer feed ratio (α) of A₂ to AB₂ significantly affects the molecular parameters and the critical condition of gelation. Gelation can be avoided if α is > . At the critical state, the degree of branching decreases firstly and reaches its minimum value at about α≈0.22. Then, it increases with increasing α‐value. In comparison with experimental results, non‐equal reactivity of the active groups should be considered.

     

Encapsulation of a Single Metal Nanoparticle with Tunable Size in a Monodisperse Polymer Microcapsule

A versatile approach to fabricate monodisperse poly[styrene‐co‐(divinyl benzene)] (PS‐co‐DVB) microcapsules that contain a single gold nanoparticle (AuNP) has been demonstrated. Using the PS‐co‐DVB microcapsule as a microreactor, aqueous HAuCl₄ and NaBH₄ solutions are subsequently infiltrated. The size of the resulting AuNP inside of the PS‐co‐DVB microcapsules is easily tunable by controlling the repeated infiltration cycles of aqueous HAuCl₄ and NaBH₄. PS‐co‐DVB microcapsules that contain a single silver and palladium nanoparticle are also obtained by following a similar protocol.

     

Influence of Cross‐Linking Density on the Glass Transition and Structure of Chemically Cross‐Linked PVA: A Molecular Dynamics Study

Mechanical properties and glass transitions of cross‐linked polymer networks depend strongly on both the network topology and cross‐linking density. A model is developed using a dynamic cross‐linking approach based on a cutoff distance criterion followed by a high‐temperature annealing procedure. The analysis focused on on the influence of cross‐linking degree on chain packing and hydrogen‐bond structure and on the roles played by various energy components in the glass transition process. T_g was calculated using two different methods; (i) from the intersection of lines drawn through points in a plot of specific volume versus temperature and (ii) from plots of different molecular energy components as a function of temperature.