O‐Glycosylation/Alkylation and Antimicrobial Activity of 4,6‐Diaryl‐2‐Oxonicotinonitrile Derivatives

A series of glycosylation and alkylation reactions of 6‐phenanthernyl‐2‐pyridone derivatives 1a , 1b containing electron withdrawing and electron donating substituents at 4‐position is reported. Regioselective 2‐O‐ alkylated/glycosylated products were obtained exclusively, irrespective of the electronic nature of alkylating or the glycosyling agent. Glycosylation of 1a , 1b with glucosyl/galactosyl and lactosyl bromides afforded 2a , 2b ; 4a , 4b ; and 6a , respectively. Alkylation of 1a , 1b with epichlorohydrin, propargyl, allyl bromides, and 3‐chloropropanol resulted in compounds 8 , 9 , 10 and 13 , respectively. Deprotection of O‐glycosylated products under conventional conditions provided the free glycosides 3a , 3b ; 5a , 5b ; 7a , 12 ; and 13 , respectively. The minimal inhibitory concentration for some of the newly synthesized compounds showed high significant activity against Gram (+ve) and Gram (−ve) and antifungal activities. Among the screened compounds, the 4‐trifluromethyl phenyl derivatives 2a , 3a , 4a , 8a , and 11a exhibited strong antimicrobial activity.     

Synthesis and Structure/Property Relationships of Regioselective 2‐O‐, 3‐O‐ and 6‐O‐Ethyl Celluloses

Regioselectively ethylated celluloses, 2‐O‐ ( 1 ), 3‐O‐ ( 2 ), and 6‐O‐ethyl‐ ( 3 ) celluloses were synthesized via ring‐opening polymerization of glucopyranose orthopivalate derivatives. The number‐average degrees of polymerization (DP_ns) of compounds 1 and 2 were calculated to be 10.6 and 49.4, respectively. Three kinds of compound 3 with different DP_ns were prepared: DP_ns = 12.9 ( 3‐1 ), 60.3 ( 3‐2 ), and 36.1 ( 3‐3 ). The 2‐O‐, 3‐O‐, and 6‐O‐ethylcelluloses were soluble in water, confirmed by NMR analysis. Furthermore, the 3‐O‐ ( 2 ), and 6‐O‐ethyl‐ ( 3‐2 ) celluloses showed thermo‐responsive aggregation behavior and had a lower critical solution temperature (LCST) at about 40 °C and 70 °C, respectively, based on the results from turbidity tests and DSC measurements. The 6‐O‐ethyl‐cellulose ( 3‐3 ) with DP_n = 36.1 and DP_w = 54.6 showed gelation behavior over approx 70 °C, whereas the 6‐O‐ethyl‐celluloses 3‐1 and 3‐2 with lower and higher molecular weight, such as DP_ns 12.9 and 60.3, did not show gelation behavior at this temperature. It was revealed that the position of ethyl group affected the phase transition temperature. According to our experiments, the 3‐O‐ethyl and 6‐O‐ethyl groups along the cellulose chains caused the thermo‐responsive property of their aqueous solutions. The appropriate DP of the regioselective 6‐O‐ethyl‐cellulose existed for gelation of the aqueous solution.

     

Retention Prediction System of O‐Aryl,O‐(1‐methylthioethylidene‐amino)phosphates on RP‐HPLC

Using factor analysis and stepwise linear regression methods, two parameters – CMR and ECCR – were selected from eight solute‐related structure parameters as the most retention‐influencing parameters. The relationships between the retention data (k ´) and the two structure parameters were established for 13 O‐aryl,O‐(1‐methylthioethylideneamino)phosphate compounds under a wide range of experimental conditions. The retention data (k ´) of another seven compounds with similar structures were predicted using these QSRR equations. Good agreement was obtained between the experimental k ´ values and predicted ones.     

Efficient Synthesis of 1,2,3,4,6‐Penta‐O‐acetyl‐L‐idopyranose

An efficient synthesis of 1,2,3,4,6‐penta‐O‐acetyl‐L ‐idopyranose 2 from 3,5‐O‐benzylidene‐1,2‐O‐isopropylidene‐α‐D ‐glucofuranose in five steps in 45% overall yield via hydroboration of enol ether, hydrolysis of L ‐idofuranosyl sugar and acetolysis of 1,6‐anhydro‐β‐L ‐idopyranose as key steps is described here.     

Simultaneous analysis of catechol‐O‐methyl transferase activity,S‐adenosylhomocysteine and adenosine

Novel HPLC method utilizing UV‐detection was developed to analyse catechol‐O‐methyltransferase (COMT) products, vanillic acid and isovanillic acid, S‐adenosylhomocysteine (SAH) and adenosine formed from dihydroxybenzoic acid and S‐adenosyl‐L‐methionine (SAM) by incubation of the rat tissues. Entacapone, a COMT inhibitor, prevented the formation of SAH only partially in the striatal homogenate whereas in the kidney homogenate the increase of SAH was prevented by entacapone. In conclusion, this method was reliable, rapid and simple. COMT seemed to be partially responsible on the SAM utilizing methylations in the striatal homogenates while in the high COMT activity tissue, COMT was the main SAH producing methyltransferase. Copyright © 2009 John Wiley & Sons, Ltd.     

Improved Synthesis of Phytosphingosine and Dihydrosphingosine from 3,4,6‐Tri‐O‐benzyl‐D‐galactal

An efficient and facile synthesis of phytosphingosine and dihydrosphingosine derivatives is described with less steps and in improved overall yield (66–72%) starting from commercially available tri‐O‐benzyl‐D ‐galactal. The key steps include Wittig reaction, Mitsunobu transformation, reduction, and deprotection.     

MALDI‐MS profiling of serum O‐glycosylation and N‐glycosylation in COG5‐CDG

Congenital disorders of glycosylation (CDG) are due to defective glycosylation of glycoconjugates. Conserved oligomeric Golgi (COG)‐CDG are genetic diseases due to defects of the COG complex subunits 1–8 causing N‐glycan and O‐glycan processing abnormalities. In COG‐CDG, isoelectric focusing separation of undersialylated glycoforms of serum transferrin and apolipoprotein C‐III (apoC‐III) allows to detect N‐glycosylation and O‐glycosylation defects, respectively. COG5‐CDG (COG5 subunit deficiency) is a multisystem disease with dysmorphic features, intellectual disability of variable degree, seizures, acquired microcephaly, sensory defects and autistic behavior. We applied matrix‐assisted laser desorption/ionization‐MS for a high‐throughput screening of differential serum O‐glycoform and N‐ glycoform in five patients with COG5‐CDG. When compared with age‐matched controls, COG5‐CDG showed a significant increase of apoC‐III_0a (aglycosylated glycoform), whereas apoC‐III₁ (mono‐sialylated glycoform) decreased significantly. Serum N‐glycome of COG5‐CDG patients was characterized by the relative abundance of undersialylated and undergalactosylated biantennary and triantennary glycans as well as slight increase of high‐mannose structures and hybrid glycans. Using advanced and well‐established MS‐based approaches, the present findings reveal novel aspects on O‐glycan and N‐glycan profiling in COG5‐CDG patients, thus providing an increase of current knowledge on glycosylation defects caused by impairment of COG subunits, in support of clinical diagnosis. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis, Crystal Structure and Biological Activities of O, O-Dialkyl α-[1-（2-Chlorothiazol-5-ylmethyl）-5-methyl- 1 H-1,2,3-triazol-4-ylcarbonyloxy]alkylphosphonates

In order to search for novel agrochemicals with high activity and low toxicity, a series of phosphonate derivatives containing 1,2,3-triazole and thiazole rings were designed and synthesized using 2-chloro-5-（chloromethyl）- thiazole as the starting material. Their structures were confirmed by IR, ^1H NMR, ^31p NMR, EI-MS or ESI-MS and elemental analyses. The crystal structure of 7a was determined by single crystal X-ray diffraction. Preliminary bioassays indicated that most of the target compounds did not display insecticidal activities, but a fraction of them possessed herbicidal and fungicidal activities to some extent.     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Differentiation of 18O‐ and 16O‐rich layers in anodic alumina films by glow discharge time‐of‐flight mass spectroscopy

The performance of glow discharge time‐of‐flight mass spectrometry in isotopic differentiation is revealed using the distribution of oxygen isotopes ¹⁶O and ¹⁸O in barrier‐type anodic alumina films as a focus. Anodic alumina films comprising ¹⁸O‐rich layers of controlled thickness were formed by the appropriate combination of anodising of superpure aluminium in electrolytes enriched with ¹⁸O isotopes and of natural abundance of ¹⁸O isotopes. Analysis of the elemental depth profiles of selected ionic species, i.e. ¹⁶O¹⁸O, allowed determination of the locations of the ¹⁸O‐rich layers and the ¹⁸O/¹⁶O interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Scalable,Transition‐Metal‐Free Direct Oxime O‐Arylation: Rapid Access to O‐Arylhydroxylamines and Substituted Benzo[b]furans

O‐Aryloximes, generated from readily available and inexpensive oximes through transition‐metal‐free O‐arylation, can either be hydrolyzed to O‐arylhydroxylamines or conveniently converted to structurally diverse benzo[b]furans through an environmentally benign, one‐pot [3,3]‐sigmatropic rearrangement/cyclization sequence.     

Xanthone O‐Glycosides from the Roots of Pteris Multifida

Two new xanthone glycosides and six known compounds were isolated from the roots of Pteris multifida. Based on spectroscopic and chemical methods, the structures of the new compounds were elucidated as 1‐hydroxy‐4,7‐dimethoxy‐8‐(3‐methyl‐2‐butenyl)‐6‐O‐α‐L‐rhamnopyranosyl‐(1→2)‐[β‐D‐glucopyranosyl‐(1→3)]‐β‐D‐glucopyranosylxanthone ( 1 ), and 1,3‐dihydroxy‐7‐methoxy‐8‐(3‐methyl‐2‐butenyl)‐6‐O‐α‐L‐rhamnopyranosyl‐(1 →2)‐[β‐D‐glucopyranosyl‐(1→3)]‐β‐D‐glucopyranosylxanthone ( 2 ), respectively.     

七-O-乙酰基-β-乳糖异硫氰酸酯的合成、表征及电化学研究

本文合成了并培养出了七-O-乙酰基—β—乳糖异硫氰酸酯的单晶，用X射线衍射分析了其晶体结构。结果表明，晶体为正交晶系，P2₁2₁2₁空间群，a＝1．23282(7)，b＝1．80012(10)，c＝1.85230(10) nm，α＝β＝γ＝90°，V＝4．1107(4) nm³，Z＝4。电化学实验观测到单链DNA和双链DNA对该化合物的峰电流均有明显降低作用，表明化合物与DNA发生了静电作用。     

Flüssig–Flüssig‐Extraktion von Silber(I) mit Aroylthiocarbamidsäure‐O‐estern – Einfluss von Solvens und Struktur der Extragentien

Liquid–Liquid Extraction of Silver(I) with Aroylthiocarbamic‐ O ‐esters Influence of the Solvents and of the Structure of Extractants Five bisbidentate (H₂L) and two bidentate (HL) aroylthiocarbamic‐O‐esters were synthesized and used for the liquid–liquid extraction of silver(I). A silver(I) complex was characterized in solid state. The distribution ratio D_Ag and the compositions of the extracted complexes were obtained for the silver extraction from nitric acid solutions depending on the pH value and the organic solvent. D_Ag values are decreasing in the sequence of the solvents decane, decane/toluene, toluene, chloroform. The bisbidentate extractants are more effective than the bidentate ones. Hetero atoms in the bridging molecule group of the bisbidentate compounds increase the D_Ag values. The extraction behavior is discussed with regard to the calculated protonation constants and stability constants.     

Lithium Cyanide Supported by O‐ and N‐Donors

A series of adducts of LiCN, namely [Li(Me₂CO₃)CN], [Li(Et₂CO₃)CN], and [Li(NMP)CN] (NMP = N‐methyl‐2‐pyrrolidone) were prepared by treatment of solvent‐free LiCN with the appropriate donor. The starting material for these approaches, donor‐free LiCN, was quantitatively prepared from Me₃SiCN and Li[Me] in diethyl ether at 0 °C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me₂CO₃)CN] and [Li(Et₂CO₃)CN] are water‐sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 °C. To evaluate the cyanation ability the reactions of 1‐bromooctane and 3‐bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air‐sensitive, donor‐free LiCN. A product of the chloride‐cyanide‐bromide exchange could be isolated and structurally characterized by X‐ray diffraction.