A convenient synthesis of pyrazolidine and 3‐amino‐6,7‐dihydro‐1H,5H‐pyrazolo[1,2‐a] pyrazol‐1‐one

A convenient four‐step synthesis of the aminobicyclopyrazolone hydrochloride 1 ·HC1 was achieved starting from di‐tert‐butyl hydrazodiformate (8) . The route entails cyclization of 8 with 1,3‐dibromopropane under phase transfer conditions followed by deprotection of 1,2‐di‐tert‐butoxycarbonylpyrazolidine (9) to give pyrazolidine hydrochloride ( 2 ·HC1). Cyanoacetylation of the latter and ring closure of the resulting cyanoacetyl pyrazolidine (7) gave 1·HC1. This novel synthesis circumvents distillation of pyrazolidine (2) and flash chromatography to provide the hydrochloride of 1 in 35–46% overall yields compared to 6% yield for the patent procedure.     

SO2‐Extrusion of an 8‐thiabicylo[3.2.1]octa‐2,6‐diene 8,8‐dioxide and rearrangement of the resulting cycloheptatriene

The reaction of 3,4‐di‐tert‐butyl‐thio‐phene 1‐oxide ( 8 ) with tetrachlorocyclopropene provided 6,7‐di‐tert‐butyl‐2,3,4,4‐tetrachloro‐8‐thia‐bicylo[3.2.1]octa‐2,6‐diene 8‐oxide ( 10 ), which was oxidized to the corresponding 8,8‐dioxide 16 by m‐chloroperbenzoic acid. The thermolysis of 16 in refluxing chlorobenzene, xylene, or octane gave 5‐tert‐ butyl‐1,2‐dichloro‐3‐[(1,1‐dich‐loro‐2,2‐dimethyl)‐pro‐ pyl]‐benzene ( 18 ) with extrusion of SO₂ and 2‐tert‐butyl‐4,5,6‐trichloro‐9,9‐dimethylbicyclo[5.2.0]nona‐1,3,5‐triene ( 19 ) with extrusion of SO₂ and HCl in 73–78% combined yields. On the other hand, the thermolysis of 16 in the presence of triethylamine gave 19 as the sole product in 98% yield. A mechanism that involves the initial formation of 4,5‐di‐tert‐butyl‐1,2,7,7‐tetrachlorocycloheptatriene ( 17 ) is proposed to ex‐ plain the observed products. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:132–222, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20079     

Synthesis and properties of ortho‐linked aromatic polyimides based on 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene

A bis(ether amine) containing the ortho‐substituted phenylene unit and pendant tert‐butyl group, 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene, was synthesized and used as a monomer to prepare polyimides with six commercial dianhydrides via a conventional two‐stage procedure. The intermediate poly(amic acid)s had inherent viscosities of 0.78–1.44 dL/g, and most of them could be thermally converted into transparent, flexible, and tough polyimide films. The inherent viscosities of the resulting polyimides were in the range of 0.46–0.87 dL/g. All polyimides were noncrystalline, and most of them showed excellent solubility in polar organic solvents. The glass‐transition temperatures of these polyimides were in the range of 222–259 °C in differential scanning calorimetry and 212–282 °C in thermomechanicl analysis. These polyimides showed no appreciable decomposition up to 500 °C in thermogravimetric analysis in air or nitrogen. A comparative study of the properties with the corresponding polyimides without pendant tert‐butyl groups derived from 1,2‐bis(4‐aminophenoxy)benzene is also presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1551–1559, 2000     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Arylspiroborates Derived from 4‐tert‐Butylcatechol and 3,5‐Di‐tert‐butylcatechol and Their Antimicrobial Activities

A family of arylspiroborates has been prepared by the addition of either 4‐tert‐butylcatechol or 3,5‐di‐tert‐butylcatechol to boric acid and an alkali metal hydroxide. All compounds were characterized fully using multinuclear NMR spectroscopy and by elemental analyses. A single crystal X‐ray diffraction was carried out on potassium (bis‐(3,5‐di‐tertbutyl[1,2‐benzenediolato(2‐)‐O,O′]borate)) ( 8 ). All compounds displayed appreciable anti‐microbial activities.     

New Bis‐o‐Benzoquinoid Ligands with Ethylene Bridge and Their Metal Complexes

The treatment of di‐o‐quinone 4,4′‐(ethane‐1,2‐diyl)‐bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH₂–CH₂–Q, 1 ) leads to its rearrangement to form di‐p‐quinomethide 4,4′‐(ethane‐1,2‐diylidene)bis(2‐hydroxy‐3,6‐di‐tert‐butyl‐cyclohexa‐2,5‐dienone) ( 2 ). The subsequent oxidation of 2 by an alkaline solution of K₃[Fe(CN)₆] yielded the new di‐o‐quinone 4,4′‐(ethene‐1,2‐diyl)bis(3,6‐di‐tert‐butyl‐o‐benzoquinone) (Q–CH=CH–Q, 3 ), which contains an ethylene bridge. The formation of mono‐ and poly‐reduced derivatives of 2 and 3 with potassium, thallium was studied by EPR technique. The dinuclear thallium derivative of 3 , Tl(SQ–CH=CH–SQ)Tl, was found to exist in the diamagnetic quinomethide form. The most stable derivatives of 2 and 3 are triphenyltin(IV) bis‐p‐quinomethide‐phenolate ( 4 ) and triphenylantimony(V) bis‐catecholate ( 5 ), which have been synthesized and isolated. The molecular structures of 2 , 3 , and 5 were characterized by single‐crystal X‐ray diffraction.     

Enhanced redox stability and electrochromic properties of aromatic polyamides based on N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new bis(triphenylamine)‐type dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was prepared by a well‐established procedure and led to a new family of redox‐active aromatic polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenylphenylenediamine (TPPA) segments. The resulting polyamides were amorphous with good solubility in many organic solvents, and most of them could be solution cast into flexible polymer films. The polyamides exhibited high thermal stability with glass‐transition temperatures in the range of 247–293 °C and 10% weight‐loss temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during oxidative scanning, with a strong color change from a colorless or pale yellowish neutral form to green and blue oxidized forms. They had enhanced redox stability and electrochromic performance when compared with the corresponding analogs without tert‐butyl substituents on the TPPA unit. The polyamide with TPPA units in both the diacid and diamine components shows multicolored electrochromic behavior. A polyamide containing both the cathodic coloring anthraquinone chromophore and the anodic coloring TPPA chromophore has the ability to show red, green, and blue states, toward single‐component RGB electrochromics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and antiproliferative activity of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene against breast cancer cells

This paper describes the synthesis of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene. Two synthetic pathways were explored. The best pathway consisted of the alkylation of 1,2‐bis‐[4‐(tert‐butyl‐dimethylsilyloxy)phenyl]‐1‐(4‐hydroxyphenyl)but‐1‐ene with BrCH₂COOEt. The ester obtained was transformed into the Weinreb amide by reaction with HN(OMe)Me–HCl. The reaction of lithium manganese tricarbonylcyclopentadienide with the Weinreb amide produced 1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐tert‐butyldimethylsiloxyphenyl)‐but‐1‐ene. The deprotection of phenolic functions of the latter compound led to the formation of the final compound. The Z and E isomers could be separated but the isomerization of these isomers from one to another is an easy process. The Z + E compound 2 was tested against the hormone‐dependent MCF‐7 and hormone‐independent MDA‐MB‐231 breast cancer cell lines. The IC₅₀ values of compound 2 were 4.80 ± 2.00 µm and 4.79 ± 0.70 µm for MCF‐7 cells and MDA‐MB‐231 cells, respectively, which was three times better than the ferrocenyl analogue. Copyright © 2012 John Wiley & Sons, Ltd.     

NMR analysis of a series of 1,2‐bis(1‐R‐5‐oxo‐2,3‐dihydro‐1H‐pyrrol‐4‐ylidene)ethanes and X‐ray crystal structure analysis of the R = mesityl compound

Four tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[1‐R‐5‐oxo‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate] compounds, denoted class (1), are a series of conjugated buta‐1,3‐dienes substituted with a heterocyclic group. The compounds can be used as dyes and pigments due to their long‐range conjugated systems. Four structures were studied using ¹H NMR, ¹³C NMR and mass spectroscopy, viz. with R = 2,4,6‐trimethylphenyl, (1a), R = cyclohexyl, (1b), R = tert‐butyl, (1c), and R = isopropyl, (1d). A detailed discussion is presented regarding the characteristics of the three‐dimensional structures based on NMR analysis and the X‐ray crystal structure of (1a), namely tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[5‐oxo‐1‐(2,4,6‐trimethylphenyl)‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate], C₃₆H₃₆N₂O₁₀. The conjugation plane and stability were also studied via quantum chemical calculations.     

Attempt to Synthesize Hindered 2,4,6‐Tri‐Aryloxy‐s‐Triazines: Bis(2,4‐di‐tert‐Butylphenyl) Carbonate – Crystal Structure

Some less hindered 2,4,6‐tri‐aryloxy‐s‐triazines were synthesized through the reaction of the corresponding phenols as a starting materials with cyanogen bromide (BrCN) to obtain the corresponding arylcyanates and then trimerized. Unexpectedly, 2,4‐di‐tert‐butyl‐1‐cyanatobenzene derived from 2,4‐di‐tert‐butylphenol did not trimerize but, indeed, yielded bis(2,4‐di‐tert‐butylphenyl) carbonate. The structures of 2,4,6‐tri‐aryloxy‐s‐triazines and bis(2,4‐di‐tert‐butylphenyl) carbonate were characterized by means of IR, ¹H, and ¹³C NMR spectroscopies. Also the structure of the latter compound was studied by X‐ray crystallography.     

2,4,6‐Tri‐tert‐butylphenyl and 2,4‐di‐tert‐butyl‐6‐methylphenyl groups: Look similar,react differently

The crystal structures of molecules with two phosphaalkene groups have been determined. Differences in the stabilization of the PC π‐bond by the 2,4,6‐tri‐tert‐butylphenyl and 2,4‐di‐tert‐butyl‐6‐methylphenyl groups were observed. It has been found that lithium supermesityl(trimethylsilyl)phosphide could be a very efficient base to remove a proton from acetonitrile.© 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:662–666, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10083     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Synthesis of Some C2‐Symmetric Bidentate Ligands and Their Complexes Derived from Feist's Acid

Various new C₂‐symmetric bidentate ligands, bearing phosphorus, nitrogen, and sulfur, were obtained in an efficient manner, starting from (±)‐trans‐3‐methylidenecyclopropane‐1,2‐dicarboxylic acid (Feist's acid; (±)‐trans‐ 3 ). The structures of the new bidentate ligands, di(tert‐butyl) (±)‐[(trans‐3‐methylidenecyclopropane‐1,2‐diyl)dimethanediyl]biscarbamate ((±)‐ 9 ), (±)‐(trans‐3‐methyldienecyclopropane‐1,2‐diyl)dimethanaminium dichloride ((±)‐ 10 ), (±)‐S,S′‐[(trans‐3‐methylidenecyclopropane‐1,2‐diyl)dimethanediyl] diethanethioate ((±)‐ 11 ), and (±)‐[(trans‐3‐methylidenecyclopropane‐1,2‐diyl)dimethanediyl]bis(diphenylphosphane) ((±)‐ 12 ), were fully characterized by standard spectroscopic techniques. These new classes of C₂‐symmetric bidentate ligands have the potential to be used in asymmetric catalysis.     

N,O‐chelate aluminum and zinc complexes: synthesis and catalysis in the ring‐opening polymerization of ε‐caprolactone

Reaction between 2‐(1H‐pyrrol‐1‐yl)benzenamine and 2‐hydroxybenzaldehyde or 3,5‐di‐tert‐butyl‐2‐hydroxybenzaldehyde afforded 2‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL¹NH, 1a) or 2,4‐di‐tert‐butyl‐6‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL²NH, 1b). Both 1a and 1b can be converted to 2‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL³N, 2a) and 2,4‐di‐tert‐butyl‐6‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL⁴N, 2b), respectively, by heating 1a and 1b in toluene. Treatment of 1b with an equivalent of AlEt₃ afforded [Al(Et₂)(OL²NH)] (3). Reaction of 1b with two equivalents of AlR₃ (R = Me, Et) gave dinuclear aluminum complexes [(AlR₂)₂(OL²N)] (R = Me, 4a; R = Et, 4b). Refluxing the toluene solution of 4a and 4b, respectively, generated [Al(R₂)(OL⁴N)] (R = Me, 5a; R = Et, 5b). Complexes 5a and 5b were also obtained either by refluxing a mixture of 1b and two equivalents of AlR₃ (R = Me, Et) in toluene or by treatment of 2b with an equivalent of AlR₃ (R = Me, Et). Reaction of 2a with an equivalent of AlMe₃ afforded [Al(Me₂)(OL³N)] (5c). Treatment of 1b with an equivalent of ZnEt₂ at room temperature gave [Zn(Et)(OL²NH)] (6), while reaction of 1b with 0.5 equivalent of ZnEt₂ at 40 °C afforded [Zn(OL²NH)₂] (7). Reaction of 1b with two equivalents of ZnEt₂ from room temperature to 60 °C yielded [Zn(Et)(OL⁴N)] (8). Compound 8 was also obtained either by reaction between 6 and an equivalent of ZnEt₂ from room temperature to 60 °C or by treatment of 2b with an equivalent of ZnEt₂ at room temperature. Reaction of 2b with 0.5 equivalent of ZnEt₂ at room temperature gave [Zn(OL⁴N)₂] (9), which was also formed by heating the toluene solution of 6. All novel compounds were characterized by NMR spectroscopy and elemental analyses. The structures of complexes 3, 5c and 6 were additionally characterized by single‐crystal X‐ray diffraction techniques. The catalysis of complexes 3, 4a, 5a–c, 6 and 8 toward the ring‐opening polymerization of ε‐caprolactone was evaluated. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthese,Struktur, Elektrochemie und optische Eigenschaften von alkinylfunktionalisierten 1,3,2‐Diazaborolen und 1,3,2‐Diazaborolidinen

Syntheses, Structures, Electrochemistry and Optical Properties of Alkyne‐Functionalized 1,3,2‐Diazaboroles and 1,3,2‐Diazaborolidenes The reaction of 2‐bromo‐1,3‐ditert‐butyl‐2,3‐dihydro‐1H‐1,3,2‐diazaborole ( 3 ) with lithiated tert‐butyl‐acetylene and lithiated phenylacetylene affords the 2‐alkynyl‐functionalized 1,3,2‐diazaboroles 4 and 5 as a thermolabile colorless oil ( 4 ) or a solid ( 5 ). Similarly 2‐bromo‐1,3‐diethyl‐2,3‐dihydro‐1H‐1,3,2‐benzodiazaborole ( 6 ) was converted into the crystalline 2‐alkynyl‐benzo‐1,3,2‐diazaboroles 7 and 8 by treatment with LiC≡C–tBu or LiC≡CPh, respectively. 2‐Ethynyl‐1,3‐ditert‐butyl‐2,3‐dihydro‐1H‐1,3,2‐diazaborole ( 2 ) was metalated with tert‐butyl‐lithium and subsequently coupled with 2‐bromo‐1,3,‐ditert‐butyl‐2,3‐dihydro‐1H‐1,3,2‐diazaborole ( 3 ) to afford bis(1,3‐ditert‐butyl‐2,3‐dihydro‐1H‐1,3,2‐diazaborol‐2‐yl)acetylene ( 9 ) as thermolabile colorless crystals. Analogously coupling of the lithiated species with 6 or with 2‐bromo‐1,3‐ditert‐butyl‐1,3,2‐diazaborolidine ( 11 ) gave the unsymmetrically substituted acetylenes 10 or 12 , respectively, as colorless solids. Compounds 4 , 5 , 7 – 10 and 12 are characterized by elemental analyses and spectroscopy (IR, ¹H‐, ¹¹B{¹H}, ¹³C{¹H}‐NMR, MS). The molecular structures of 5 , 8 and 9 were elucidated by X‐ray diffraction analyses.     

Synthesis and biological activity of novel N‐tert‐butyl‐N,N′‐substitutedbenzoylhydrazines containing 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl

In a search for new insect growth regulators with unusual biological properties and different activity spectrum, we thought that the preservation of the bioactive unit and the introduction of 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl in N‐tert‐butyl‐N,N′‐dibenzoylhydrazine would enhance their larvicidal activities to a significant degree. Therefore, we designed and synthesized N′‐tert‐butyl‐N′‐[2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl]‐N‐benzoylhydrazine and analogs by two procedures. These novel compounds were characterized by elemental analyses, IR, and ¹H NMR. At the same time, N‐tert‐butyl‐N‐substitutedbenzoylhydrazines were prepared by a new method, and some reactions involved were studied. The preliminary results indicate that some compounds have inhibitory effects against plant pathogenetic bacteria such as early blight of tomato. Copyright © 2002 John Wiley & Sons, Ltd.     

Zur Hydrolyse von 2,3‐Dihydro‐1,3‐di‐tert‐butyl‐4,5‐dimethylimidazol‐2‐yliden. Die Kristallstruktur von 1,3‐Di‐tert‐butyl‐4,5‐dimethylimidazoliumhydrogencarbonat

On the Hydrolysis of 2,3‐Dihydro‐1,3‐di‐tert‐butyl‐4,5‐dimethylimidazol‐2‐ylidene. The Crystal Structure of 1,3‐Di‐tert‐butyl‐4,5‐dimethylimidazolium Bicarbonate 1,3‐Di‐tert‐butyl‐4,5‐dimethylimidazolium bicarbonate ( 7 ), formed on the exposure of 2,3‐dihydro‐1,3‐di‐tert‐butyl‐4,5‐dimethylimidazol‐2‐ylidene ( 6 ) towards air, is prepared on the reaction of 6 with ammonium bicarbonate; its crystal structure analysis reveals the presence of dimeric bicarbonate anions linked to each other and to the imidazolium ions with hydrogen bonds.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

Catenation of 1,3‐Diphosphacyclobutane‐2,4‐diyl Units Having 2,4,6‐Tri‐tert‐butylphenyl Protecting Groups and a P‐sec‐Butyl Group in the Ring

Two and three stable 1‐sec‐butyl‐2,4‐bis(2,4,6‐tri‐tert‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl units were catenated to construct multi‐biradical derivatives by utilizing 1,3‐di‐, 1,4‐di‐, and 1,3,5‐trimethylenebenzenes as bridging groups, respectively. UV/Vis spectroscopic and cyclovoltammetric (CV) properties of the multi‐biradicals indicate a non‐conjugative interaction between the concatenated biradical units.