Adsorption of styrene on micron-sized, monodisperse, cross-linked polymer particles in a snowman-shaped state by utilizing the dynamic swelling method

Polystyrene/styrene–divinylbenzene copolymer composite particles with different cross-linking densities were produced by seeded copolymerization for (styrene/divinylbenzene)-swollen polystyrene particles prepared by utilizing the dynamic swelling method (DSM) which was proposed by the authors in 1991. Using the cross-linked, composite particles as seeds, styrene-adsorbed (swollen) composite particles having snowman shapes were prepared by the DSM. With a decrease in the cross-linking density in the composite particles, the volume of the composite particle which was embedded in a spherical styrene phase in the snowman-shaped, styrene-adsorbed particle increased and the contact angle of the styrene phase on the composite particle decreased. In the DSM process, the absorption stage of styrene in the composite particles and the adsorption stage thereon were clearly observed. This suggests that the cross-linking density of the composite particles greatly affects the morphology of the snowman-shaped particles. Received: 13 December 2000 Accepted: 14 March 2001     

Preparation of micron-sized monodispersed highly monomer- “adsorbed” polymer particles having snow-man shape by utilizing the dynamic swelling method with tightly cross- linked seed particles

Micron-sized, monodispersed highly styrene-“adsorbed” particles having snow-man shape were prepared by the dynamic swelling method (DSM) with tightly cross-linked polymer seed particles as follows. First, 3.8 μm-sized monodispersed polystyrene (PS)/ poly(divinylbenzene) (PDVB) (PS/PDVB = 1/10 wt. ratio) composite particles produced by seeded polymerization utilizing DSM were dispersed in an ethanol/water (6/4, w/w) solution dissolving styrene monomer, and poly(vinyl alcohol) as a stabilizer. Second, water was subsequently added to the dispersion with a micro-feeder at a rate of 2.88 ml/h at room temperature. The cross-linked seed particles adsorbed a large amount of styrene onto the surfaces and resulted in mono-dispersed highly styrene-“adsorbed” snow-man shape particles having about 10 μm in diameter. Received: 16 April 1998 Accepted: 9 June 1998     

Influence of particle diameter on the morphology of micron-sized, monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Micron-sized, monodispersed polystyrene (PS)/poly (n-butyl methacrylate) (PBMA) composite particles, in which the PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for dispersions of n-butyl methacrylate (BMA) swollen PS particles in a wide range of PS/BMA ratios in the presence of NaNO₂ as a water-soluble inhibitor. Moreover, in order to change the diameter of the composite particles at same PS/BMA ratio, PS/PBMA (1/150 w/w) composite particles were produced using five kinds of PS particles in a range of diameters from 0.64 to 3.27 μm as seeds. The percentages of the PS/PBMA composite particles having double and triple and over PS domains, which were thermodynamically unstable morphologies, increased with the increase in the diameter of BMA swollen PS particles. There was a clear influence of the size of the swollen particles on the morphology of the PS/PBMA composite particles produced. Received: 30 September 1999/Accepted: 18 April 2000     

MgH2-MoS2-PP复合材料的储氢性能

通过球磨法制备了MgH₂-MoS₂-PP（PP=热解聚苯胺,w_MOS2=w_PP=8.33%）复合材料。与纯MgH₂对比研究发现,复合材料的初始放氢温度从650 K下降到550 K,并且在573 K下,75 min内的放氢量从0.38%（w/w,下同）提高到2.36%。在423 K下,放氢后产物可在40 min内吸氢2.45%,比纯MgH₂高出2.13倍。放氢反应的活化能比纯MgH₂（101.83 kJ·mol^-1）降低了28.81 kJ·mol^-1。MgH₂-MoS₂-PP复合材料的性能提高是由于PP能够均匀地减小Mg颗粒尺寸,并提高MoS₂在体系放氢与再吸氢过程中的催化效率。     

MgH2-MoS2-PP复合材料的储氢性能

通过球磨法制备了MgH₂-MoS₂-PP（PP=热解聚苯胺,w_MoS2=w_PP=8.33%）复合材料。与纯MgH₂对比研究发现,复合材料的初始放氢温度从650 K下降到550 K,并且在573 K下,75 min内的放氢量从0.38%（w/w,下同）提高到2.36%。在423 K下,放氢后产物可在40 min内吸氢2.45%,比纯MgH₂高出2.13倍。放氢反应的活化能比纯MgH₂（101.83 kJ·mol^-1）降低了28.81 kJ·mol^-1。MgH₂-MoS₂-PP复合材料的性能提高是由于PP能够均匀地减小Mg颗粒尺寸,并提高MoS₂在体系放氢与再吸氢过程中的催化效率。     

Morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles having 9.4 μm in diameter were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles, and their morphologies were examined. The highly BMA-swollen PS particles (about 150 times the weight of the PS seed particles) were prepared by mixing monodispersed 1.8 μm-sized PS seed particles and 0.7 μm sized BMA droplets prepared with an ultrasonic homogenizer in ethanol/water (1/2, w/w) medium at room temperature. After NaNO₂ aqueous solution as inhibitor was added in the dispersion, the seeded polymerization was carried out at 70 °C. In an optical microscopic observation, one or two spherical high contrast regions which consisted mainly of PS were observed inside PS/PBMA composite particles. In the PS domain, there were many fine spherical PBMA domains. Such morphologies were based on the phase separation of PS and PBMA within the homogeneous swollen particles during the seeded polymerization. Received: 04 June 1997 Accepted: 27 August 1997     

Effects of concentration of nonionic surfactant and molecular weight of polymers on the morphology of anisotropic polystyrene/poly(methyl methacrylate) composite particles prepared by solvent evaporation method

The effects of the concentration of polyoxyethylene octylphenyl ether (OP-10) as a nonionic surfactant and the molecular weight of polymers (polystyrene (PS) and poly(methyl methacrylate) (PMMA)) on the morphology of anisotropic PS/PMMA composite particles were investigated. In the case of polymers with lower molecular weight (M _w ≈ 6.0 × 10⁴ g/mol), the PS/PMMA composite particles have dimple, via acorn, to hemispherical shapes along with the increase of the OP-10 concentration. On the other hand, when the polymers have higher molecular weight (M _w ≈ 3.3 × 10⁵ g/mol), the morphology of PS/PMMA composite particles changed from dimple, via hemispherical, to snowman-like structure while the concentration of OP-10 was increased. Furthermore, thermodynamic analysis was first simply made by spreading coefficients, and the results indicated that both the concentration of OP-10 aqueous solution and the molecular weight of polymers were very important to the final morphology of anisotropic composite particles.     

多孔羰基铁/SiO2/聚吡咯核壳结构复合材料的制备及电磁特性

首先对羰基铁进行点腐蚀得到多孔羰基铁,然后采用St?ber法和原位聚合法将SiO_2和导电高分子聚吡咯包覆在多孔羰基铁表面,制备多孔羰基铁/SiO_2/聚吡咯电磁复合吸波材料。采用XRD、SEM、TEM、FT-IR对样品结构、微观形貌进行了表征,在网络分析仪中采用同轴法测试样品电磁参数,并根据传输线理论研究了2~18 GHz微波频段内吡咯含量及涂层厚度对样品吸波性能的影响。实验结果表明:制备的多孔羰基铁/SiO_2/聚吡咯复合电磁吸波材料具有核壳结构;随着吡咯加入量的增加,吸波材料吸收峰逐渐向低频方向移动;当涂层厚度为3.5 mm、吡咯加入量为6%(w/w)时,在9.44~17.56 GHz范围内反射率均低于-10 d B,频带宽度为8.12 GHz,损耗反射率达到-23 d B。良好的吸波性能归因于复合物有效的阻抗匹配特性及多重界面极化效应,多孔羰基铁/SiO_2/聚吡咯是一种轻质、宽频、强吸收的吸波材料。     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

Preparation of micron-sized, monodispersed, “onion-like” multilayered poly(methyl methacrylate)/polysterene composite particles by reconstruction of morphology with the solvent-absorbing /releasing method

Micron-sized, monodispersed, “onion-like” multilayered poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles were prepared by the solvent-absorbing/releasing method (SARM). The viscosity within toluene-swollen composite particles, the release rate of toluene therefrom, the PMMA/PS ratio, and the kind of solvent had great influences on the reconstruction of the morphology of the PMMA/PS composite particles by the SARM. From these results, the conditions for the preparation of the multilayered composite particles by the SARM are clarified. Received: 28 September 2000 Accepted: 27 October 2000     

Randomly branched bisphenol A polycarbonates. I. Molecular weight distribution modeling,interfacial synthesis,and characterization

Randomly branched bisphenol A polycarbonates (PCs) were prepared by interfacial polymerization methods to explore the limits of gel‐free compositions available by the adjustment of various composition and process variables. A molecular weight distribution (MWD) model was devised to predict the MWD, G, and weight‐average molecular weight per arm (M_w /arm) values based on the composition variables. The amounts of the monomer, branching agent, and chain terminator must be adjusted such that the weight‐average functionality of the phenolic monomers (F_OH ) was less than 2 to preclude gel formation in both the long‐ and short‐chain branched (SCB) PCs. Several series of SCB and long‐chain branched PCs were prepared, and those lacking gels showed molecular weights measured by gel permeation chromatography–UV and gel permeation chromatography–LS consistent with model calculations. In SCB PCs, the minimum M_w /arm that could be realized without gel formation depended on both composition (molecular weight, terminator type) and process (terminator addition point, coupling catalyst) variables. The minimum M_w /arm achieved in the low molecular weight series studied ranged from ∼3300 to ∼1000. The use of long chain alkyl phenol terminators gave branched PCs with lower glass‐transition temperatures but a higher gel‐free minimum M_w /arm. SCB PCs where M_w /arm was less than ∼M_c spontaneously cracked after compression molding, a result attributed to their lack of polymer chain entanglements. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 560–570, 2000     

Evidence for hydrophobic attraction between latex particles in aqueous systems as investigated by turbidimetry

We report the evidence for attractive interaction of latex particles which are covered by poly(ethylene oxide) chains. These particles are suspended in aqueous solutions of ammonium sulfate. The interaction is probed by measurements of the turbidity of the suspensions up to 70 g/l. Turbidity is insensitive to multiple scattering and allows the static structure factor, S(q) [q=(4πn ₀/λ₀)sin(θ/2), where θ is the scattering angle, n₀ is the refractive index of the medium and λ₀ is the wavelength in vacuo], to be determined at small q values. The analysis of S(q) at small q values yields information about possible attraction of the particles. The analysis of the turbidity data furthermore shows that no aggregation took place in these systems. A weak but long-range attractive interaction was found at ammonium sulfate concentrations of 0.01 and 0.1 M. The relation of this attractive force to hydrophobic forces is discussed. Received: 9 March 2000/Accepted: 28 June 2000     

Viscometric,light scattering,and size‐exclusion chromatography studies on the structural changes of aqueous poly(vinyl alcohol) induced by γ‐ray irradiation

The crosslinking processes of aqueous poly(vinyl alcohol) (PVA) by γ‐ray irradiation were studied by viscometry, dynamic and static light scattering (DLS and SLS), as well as size exclusion chromatography (SEC). Increases in the intrinsic viscosity ([η]), molecular weight (M_w), hydrodynamic radius (R_h), and radius of gyration (R_g), and a decrease in second virial coefficient (A₂) were observed after γ‐ray irradiation. However, both the values of [η] and A₂ for irradiated PVA fell below the data of unirradiated PVA solutions, suggesting a conformational change of PVA chains after γ‐ray irradiation. This structural change of PVA as a result of γ‐ray irradiation was also indicated by the decreases in R_g/R_h from 1.5 to 1.39 by SLS and DLS, and in Mark–Houwink exponent α_η from 0.54 to 0.26 by SEC‐Viscometry. The broadening of the M_w distribution (MWD) as indicated by the polydispersity index increased from 2.2 to 6.5 because of γ‐ray irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 214–221, 2000     

Micron-sized,monodisperse, snowman/confetti-shaped polymer particles by seeded dispersion polymerization

Snowman/confetti-shaped, micron-sized, monodisperse composite particles were prepared by seeded dispersion polymerizations of n-butyl methacrylate (nBMA) with 1.28 and 2.67 m-sized polystyrene (PS) seed particles, respectively, in an ethanol/water (80/20, w/w) medium. These nonspherical composite particles consisted of one or several poly(nBMA) protuberances on the surfaces of the spherical PS particles.Part CCLXII of the series Studies on Suspension and Emulsion     

原始溶液中Ni、Co质量比对Ni-Co-S-O/NF催化剂在碱性水电解中析氧性能的影响

本文中主要研究了原始溶液中Ni、Co质量比(wNi∶wCo)对Ni-Co-S-O复合材料催化剂结构及性能的影响.采用水热法在泡沫镍(NF)基底上制备出了三维分层花瓣状纳米结构的Ni-Co-S-O复合材料催化剂.当原始溶液中wNi∶wCo=1∶2时,所制备的Ni-Co-S-O/NF(1∶2)催化剂具有更大的电化学活性面积...     

Influence of viscosity within polymerizing particle on the morphology of micron-sized,monodisperse composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

Micron-sized, monodisperse polystyrene (PS)/poly( n-butyl methacrylate) (PBMA) composite particles, in which PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles (PS/BMA=1/150, w/w) using various concentrations of benzoyl peroxide as initiator in the absence/presence of sodium nitrite (NaNO ₂) as a water-soluble inhibitor. The percentages of the composite particles having double, triple and over PS domains, which were thermodynamically unstable morphologies, increased with a rapid increase of viscosity within the polymerizing particle.     

Trapping Copper Phthalocyanine in a Silica Sono-Xerogel

A copper phthalocyanine (CuPc) has been encapsulated in silica. The trapping effects were studied comparing the UV-Vis absorption spectra of some CuPc solutions and composites prepared under different conditions. The trapped organic molecules’ stability was monitored during the gelation and drying processes. Leachability test have been carried out with the aim of checking the trapping efficiency. Hydrolysis water of pH=2 and a molar ratioR _w =6 mol acid H₂O/mol TMOS leads to a higher CuPc stacking angle homogeneity. The increase of Pc induces a narrower mesopore distribution and helps the stabilization of the composite.     

Inertial deposition of aerosol particles from laminar flows in fibrous filters

The deposition of aerosol particles onto filter fibers under the effect of inertial forces is studied in a wide range of Stokes numbers (St) at Reynolds numbers close to unity (Re ∼ 1). Coefficients η of the capture of inertial particles with finite sizes in model filters composed of parallel rows of identical parallel fibers located normal to the direction of a flow are determined based on the numerical solution of the Navier-Stokes and particle motion equations. It is shown that, at Re < 1 and a constant particle-to-fiber radius ratio, R = r _p/a, number St uniquely characterizes capture coefficients η for particles with different densities, while, at Re ≥ 1, the capture coefficient depends on both St and Re. At constant R and St values, the larger Re the higher the capture coefficient. The influence of the structure of the model filter on pressure drop Δp and η is investigated. A nonuniform arrangement of fibers in rows is shown to increase the Δp/U ratio at lower Re values and to make the η -St dependence more pronounced than that for systems of uniformly ordered fibers. The results of calculations agree with the experimental data.