Concerning the Structure of [18]Annulene

A recent computational study of Schleyer and co‐workers [1] is reviewed, which led these authors to the firm conclusion that [18]annulene has a localized structure with alternating single and double C,C bonds, contrary to earlier crystallographic analyses of X‐ray‐diffraction data favoring a delocalized non‐alternating form. It is pointed out i) that deceptive orientational disorder phenomena in the crystal might be subject to experimental resolution in this case, and ii) that, in contrast to gas and solution phases, [18]annulene might possibly assume the non‐alternating structure in the crystalline solid state.     

The Photoelectron Spectrum of [18]Annulene

The PE. spectrum of [18]annulene has been measured and correlated with MO-calculations. The experimental ionization energies can only be explained by computing the electronic states of the cation, that is by taking into account the electron correlation and reorganization in the ionic states. The results allow a discussion of the structure of the neutral molecule; they are consistent with a D_6hpoint group of symmetry.     

[18]Annulene

The geometry of [18]annulene has been fully optimized within the D_6h point group (la) utilizing ab initio MO theory at the STO-3G level to give carbon-carbon bond lengths of 1.391 and 1.400 Å. This structure is found to be 35.7 kcal/mol less stable than a D_3h structure (1b) with alternating bond lengths of 1.330 and 1.479 Å. The ionization potentials are calculated to be in the ranges. 6.2–7.1 (1a) and 7.4–8.1 eV (1b)     

The Low-Temperature UV./VIS. Absorption Spectrum of [18]Annulene

The UV./VIS. absorption spectrum of [18]annulene has been remeasured in 3-rnethylpentane at room and at liquid nitrogen (glass) temperature and interpreted by the CNDO/S-CI-method. The confrontation of the experimental electronic transitions with the CNDO/S-CI-calculated ones favors a structure with D_6h-symmetry, i.e, a structure with delocalized π-bonds.     

The Stabilization Energy of [18] Annulene. A thermochemical determination

The thermal rearrangement of [18]annulene in solution gives benzene and 1,2-benzo-1,3,7-cyclooctatriene. This reaction has been investigated using a differential scanning calorimeter and the associated enthalpy change has been measured. The enthalpy of the reaction (in the gase phase at 298°K) is From this value and the enthalpies of formation of the reaction products, the enthalpy of formation of [18]annulene is obtained: The stabilization energy of [18]annulene, defined as the difference between the enthalpy of formation of the hypothetical Kékulé [18]annulene (with single and double bonds of normal lengths) and the heat of formation of the real molecule is then a value close to the corresponding quantity found for benzene. The very large stabilization energy of [18]annulen (100 ± 6 kcal mol^?1) previously reported in the literature, based on measurements of the heat of combustion, is not correct since the annulene is certainly oxidized in the bomb prior to combustion. The isodynamic conformational mobility of [18]annulene is not incompatible with a stabilization energy of 37 kcal mol^?1; the activation enthalpy observed for this process (ΔH^≠ = 16.1 kcal mol^?1) indicates that the stabilization is not completely destroyed in the transition state. The mechanism of the thermolysis of [18]annulen, investigated by kinetic measurements and by analysis of the shape of the thermograms, is discussed.     

Die Bildungsenthalpie 1,6-überbrückter [10] Annulene

The enthalpies of formation of 1.6-methano-[10] annulene (IV) (ΔHf₂₉₈ (IV, g) = 75.2 ± 0.6 kcal mol^?1), 1.6-imino-[10] annulene (V) (ΔHf₂₉₈(V, g) = 87.8 ± 0.7 kcal mol^?1) and of 1.6-oxido-[10] annulene (VI) (ΔHf₂₉₈(VI, g) = 47.8 ± 1.2 kcal mol^?1) have been determined by combustion calorimetry. The difficulties connected with an attempt to derive meaningfull «resonance energies» are discussed.     

Metallic Conductivity in Metal Tetraaza [14]Annulene Iodides: The Crystal Structures of Dihydrodibenzo-[b,i]-1, 4, 8, 11-tetraazacyclotetradecinenickel and -palladium Iodides

Single crystals of dihydrodibenzo[b, i]-1, 4, 8, 11-tetraazacyclotetradecinenickel iodide show metallic conductivity between room temperature and approx. 110 K. The crystals are orthorhombic, space group I_bam with four formula units per cell of the following dimensions: a = 20.245, b = 13.416, c = 6.418 Å. The analogous palladium complex is isomorphous, the cell constants being a = 20.452, b = 13.430 and c = 6.499 Å. A number of other partially oxidized metal tetraaza [14]annulenes also show electrical conductivity.     

Determination of Total Radiochemical Purity of [18F]FDG and [18F]FET by High-Performance Liquid Chromatography Avoiding TLC Method

The goal of this work was to present two high-performance liquid chromatography (HPLC) method that could be applied for the determination of the total radioactive purity of 2-deoxy-2-[¹⁸F]fluoro-D-glucose ([¹⁸F]FDG) and O-(2-[¹⁸F]fluoroethyl)-L-tyrosine ([¹⁸F]FET). The separation of [¹⁸F]fluoride ions, [¹⁸F]FET and [¹⁸F]FET intermediate was accomplished on LiChrosper RP-18, 250?×?4 mm, 5 µm (Merck) analytical column. For mobile phase 10 mM potassium dihydrogen phosphate buffer at pH7 (A) and acetonitrile (B) was used: 0–2 min: 15% B; 2–12 min: 85% B; 12–15 min: 15% B, respectively. Analysis of [¹⁸F]FDG was performed using LiChrosper 100 NH₂, 250?×?4.5 mm, 5 µm (Merck) analytical column. The initial mobile phase composition was 10 mM KH₂PO₄ buffer (pH7) and acetonitrile (15:85, v/v) and the acetonitrile ratio was decreased to 15% at 2 min after the sample injection and held for 5 min. Complete elution of [¹⁸F]fluoride ions from stationary phases could be achieved by adding 10 mg/mL K[¹⁹F]F to radioactive samples in a ratio 1:1 during the sample preparation. Recovery of [¹⁸F]fluoride ions ranged from 99.5 to 100.6%. The validation of the developed methods showed good results for linearity (r²?=?0.9981–0.9996), specificity (R_S?=?3.7–10.2), repeatability (%Area RSD_%?=?1.2–4.3%) and limit of quantitation (LOQ?=?1.6–4.5 kBq). During the cross-validation similar radiochemical purity values were obtained by the novel HPLC methods and thin layer chromatography performed according to the recommendations of the Ph. Eur. monographs.

     

Powerful Oxidizing Properties of a Planar [8]Annulene: Tetrakis(perfluorocyclobuta)cyclooctatetraene and Its Radical Anion

The central eight-membered ring of tetrakis(perfluorocyclobuta)cyclooctatetraene ( 1 ) is flat both in the crystal and in solution, but tetrakis(perfluorocyclopenta)cyclooctatetraene ( 2 ) assumes a tub shape similar to that of parent cyclooctatetraene. This sterically induced structural difference strongly affects the physical properties of compounds 1 and 2 . The first and second reduction potentials of 1 in solution, +0.79 and +0.14 V vs. SCE, are considerably more positive than the corresponding values, +0.20 and −0.21 V, of 2 . Accordingly, mere contact with Hg metal in N,N-dimethylformamide converts 1 to an unusually stable radical anion 1 ^.− that is persistent in air. The temperature-independent coupling constant, a_F=+0.320 mT, of the sixteen equivalent β-¹⁹F-nuclei in 1 ^.− is much smaller than the expected value, and the g factor of 1 ^.− is markedly lower than those generally found for structurally related radical anions. In contrast, the characteristic data for 2 ^.−, generated from 2 with K metal in 1,2-dimethoxyethane, comply with the expected data. The coupling constants a_F=+0.976 and +0.935 mT, each of eight β-¹⁹F-nuclei in 2 ^.−, average +0.951 mT upon raising the temperature from 220 to 260 K. The gas-phase electron affinity of 1 , A=3.4±0.2 eV, which was estimated from the reduction potential in solution and from charge-transfer absorption spectra obtained from a series of methylated benzenes and naphthalenes, is among the highest known for neutral organic molecules.     

Dipolmomente 1, 6-überbrückter [10]- Annulene

The dipole moments of 1, 6-bridged [10]-annulenes of type I (X = CH₂, O, NH) and of bromo derivatives with X = CH₂, O are in agreement with the previously established structure of these compounds if a partial moment of approximately 0,8 D is assigned to the non-planar π-electron system.     

The synthesis of novel polycyclic heterocyclic ring system via photocyclization. 18. Benzo[h]naphtho-[1′,2′:4,5]thieno[2,3-c]quinoline and benzo[h]naphtho-[1′,2′:4,5]thieno[2,3-c] [1,2,4]triazolo[4,3-a]quinoline

The synthesis of two previously unknown polycyclic ring systems, benzo[h]naphtho[1′2′:4,5]-thieno[2,3-c]quinoline ( 1 ) and benzo[h]naphtho[1′,2′:4,5]thieno[2,3-c][1,2,4]triazolo[4,3-a]quinoline ( 2 ), was achieved via oxidative photocyclization of 1-chloro-N-(1-naphthyl)naphtho[2,1-b]thiophene-2-carboxamide ( 5 ). The total assignment of their ¹H and ¹³C nmr spectra was determined by the concerted use of two-dimensional nmr methods.     

The Low-Temperature UV/VIS Absorption Spectrum of [14]Annulene

The UV/VIS absorption spectrum of [14]annulene was measured in 3-methylpentane at room and liquid-N₂ temperatures and interpreted by the CNDO/S-CI method. This comparison between experiment and theory supports a structure with π-bond delocalization for this molecule.     

Carbon Tunneling in the Automerization of Cyclo[18]carbon

Cyclo[18]carbon (C₁₈), a recently synthesized carbon allotrope, was found to have a polyynic ground-state structure with D_9h symmetry and formally alternating single and triple bonds. Yet, under less influencing experimental conditions this molecule might undergo an automerization reaction between its two degenerate geometries through a cumulenic (non-alternating, adjacent double bonds) D_18h transition state. Herein, we discuss the role of quantum mechanical tunneling (QMT) in this degenerate reaction. Our computations predict that at the experimental temperature (5 K) the reaction in the gas phase is completely driven by an extremely rapid heavy atom tunneling (k=2.1×10⁸ s⁻¹). Even when approaching room temperature, the QMT rate is still an order of magnitude faster than the semi-classical one. We propose an experimental test to support our prediction, by measuring a characteristic tunneling energy splitting within the radio wave region. Additionally, we examine the role of QMT in other hypothetical C_4n+2 carbon clusters.     

Assessment of labelled products with different radioanalytical methods: study on 18F-fluorination reaction of 4-[18F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[18F]MPPF)

The serotonin receptor 5-HT_1A ligand 4-[¹⁸F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[¹⁸F]MPPF) was produced by a simplified method of Le Bars et al. Traditional oil bath heating was compared to microwave heating. Various radioanalytical methods, radio-Thin Layer Chromatography (TLC), High Pressure Liquid Chromatography (HPLC) and Mass Spectrometry (MS), were compared in the evaluation of the labelled product(s). The crude reaction mixture consisted of p-[¹⁸F]MPPF and 2–4 radioactive by-products eluting after the product fraction, and the reverse-phase HPLC method failed occasionally to separate p-[¹⁸F]MPPF from the radioactive by-product with close retention time. The heating method had no significant effect on the composition of labelled by-products. In LC-(ESI)-MS analysis of p-[¹⁸F]MPPF the labelled product was identified with m/z ratio of 435 ([M + H⁺]). The other HPLC fractions were measured to have following m/z ratios: (1) 327; 349; (675) (2) 402; 407/408; (791) and (3) 436, suggesting different kind of decomposition of the labelled product and/or the inactive precursor. The ion trap mass spectrometer was sufficient for the qualitative analysis of p-[¹⁸F]MPPF. However, differentiation of by-products arising from the decomposition of p-[¹⁸F]MPPF or from its precursor p-MPPNO₂ proved to be challenging.     

Diphosphapodanden, [12]‐, [15]‐ und [18]Diphosphacoronanden,Diphosphacryptand‐8 und Alkalimetall‐Komplexe

Diphosphapodands, [12]‐, [15]‐, and [18]Diphosphacoronands, Diphosphacryptand‐8, and Alkali‐Metal Complexes The cyclizing bis‐phosphonium‐salt formation of the open‐chain bis‐phosphine 17a (1,1,7,7‐tetrabenzyl〈P.O.P‐podand‐7〉) with diethylene glycol derived dibromide 13a yields the 12‐membered cyclic bis‐phosphonium salt 20 (4,4,10,10‐tetrabenzyl‐12〈O.P.O.P‐coronand‐4〉‐4,10‐diium dibromide) in yields as high as 50–60%. The 1,1,10,10‐tetrabenzyl〈P.O₂.P‐podand‐10〉 17b forms with 13a the 15‐membered cyclic bis‐phosphonium salt 21 (7,7,13,13‐tetrabenzyl‐15〈O₂.P.O.P‐coronand‐5〉‐7,13‐diium dibromide) with the same high yield. By quaternization of the bis‐phosphine 17b with triethylene glycol derived dibromide 13b , the 18‐membered 7,7,16,16‐tetrabenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉‐7,16‐diium dibromide 24 is obtained in 50% yield, too. The Wittig reaction of the cyclic phosphonium salts with benzaldehyde yields the 12‐, 15‐, and 18‐membered cyclic bis‐benzylphosphine dioxides 9, 10 , and 11 as cis‐ and trans‐isomers beside trans‐stilbene. The 7,13‐dioxido‐7,13‐dibenzyl‐15〈O₂.P.O₂.P‐coronand‐5〉 10 forms a crystalline 1 : 1 Na‐complex 23 , which exists as a dimer. The structure of 23 was established by an X‐ray analysis and spectroscopic data. The 7,16‐dibenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉 28 that is available by reduction of 11 with CeCl₃/LiAlH₄ reacts with triethylene glycol derived dibromide 13b under Ruggly Ziegler‐dilution conditions to give the bicyclic bis‐phosphonium salt 29 (1,10‐dibenzyl〈P[O₂]₃.P‐cryptand‐8〉‐1,10‐diium dibromide) in 18% yield. Again, by the Wittig procedure with benzaldehyde, the 7,16‐dioxido〈P[O₂]₃P‐cryptand‐8〉 12 is obtained as the first diphosphacryptand. The FD‐MS (CH₂Cl₂) of the cyclic bis‐phosphine dioxides 10 – 12 show that they exist as [2M+Na]⁺ complexes. The complex formation constants K_a of 9 – 11 with alkali‐metal cations are studied and compared with the complex formation of corresponding crown ethers.     

Tetrakisdehydro[18]annuleno[20]annulene

Tetrakisdehydro[18]annuleno[20]annulene has been synthesized. The ¹H NMR spectra clearly indicate the induction of dia- and paramagnetic ring currents in 18- and 20-rings, respectively. A marked suppression of the diatropicity in the 18π moiety was observed being in the same trend in other tetrakisdehydro[4n]annuleno[4n′+2]annulenes. The ¹H NMR spectroscopic behavior of the annulenoannulenes is consistent with theoretical conclusion.     

Synthesis of a Porous [14]Annulene Graphene Nanoribbon and a Porous [30]Annulene Graphene Nanosheet on Metal Surfaces

The electrical and mechanical properties of graphene-based materials can be tuned by the introduction of nanopores, which are sensitively related to the size, morphology, density, and location of nanopores. The synthesis of low-dimensional graphene nanostructures containing well-defined nonplanar nanopores has been challenging due to the intrinsic steric hindrance. Herein, we report the selective synthesis of one-dimensional (1D) graphene nanoribbons (GNRs) containing periodic nonplanar [14]annulene pores on Ag(111) and two-dimensional (2D) porous graphene nanosheet containing periodic nonplanar [30]annulene pores on Au(111), starting from a same precursor. The formation of distinct products on the two substrates originates from the different thermodynamics and kinetics of coupling reactions. The reaction mechanisms were confirmed by a series of control experiments, and the appropriate thermodynamic and kinetic parameters for optimizing the reaction pathways were proposed. In addition, the combined scanning tunneling spectroscopy (STS) and density functional theory (DFT) calculations revealed the electronic structures of porous graphene structures, demonstrating the impact of nonplanar pores on the π-conjugation of molecules.     

New approaches to synthesis of tris[1,2,4]triazolo[1,3,5]triazines

Thermal cyclization of 3-R-5-chloro-1,2,4-triazoles (R = Cl, Ph) afforded 2,6,10-tri-R- tris[1,2,4]triazolo[1,5-a:1′,5′c:1″,5″-e][1,3,5]triazines 5 (R = Ph) and 7 (R = Cl). These compounds are first representatives of this class of heterocycles, whose structures were unambiguously established. Treatment of these compounds with nucleophiles (H₂O/NaOH, NH₃) results in the triazine ring opening to give compounds consisting of three 1,2,4-triazole rings linked in a chain. For example, treatment of cyclic compound 5 with aqueous alkali affords 3-phenyl-1-3-phenyl-1-(3-phenyl-1H-1,2,4-triazol-5-yl)-1,2,4-triazol-5-yl-1H-1,2,4-triazol-5-one. Treatment of 3,7,11-triphenyltris[1,2,4]triazolo[4,3-a:4′,3′c:4″,3″-e][1,3,5]triazine (2) with HCl/SbCl₅ leads to the triazine ring opening giving rise to 5-(3-chloro-5-phenyl-1,2,4-triazol-4-yl)-3-phenyl-4-(5-phenyl-1H-1,2,4-triazol-3-yl)-1,2,4-triazole. Thermal cyclization of the latter produces 3,7,10-triphenyltris[1,2,4]triazolo[1,5-a:4′,3′c:4″,3″-e][1,3,5]triazine (13). Thermolysis of both cyclic compound 2 and cyclic compound 13 is accompanied by the Dimroth rearrangement to yield 3,6,10-triphenyl-tris[1,2,4]triazolo[1,5-a:1′, 5′-c:4″,3″-e][1,3,5]triazine (14). Compounds 13 and 14 are the first representatives of cyclic compounds with this skeleton. ¹³C NMR spectroscopy allows the determination of the isomer type in a series of tris[1,2,4]triazolo[1,3,5]triazines.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 706–712, March, 2005.