Synthesis and structure of [Cp2Zr(OPr)(HOPr)] and its activity in the polymerisation of propene oxide

The reaction of Cp₂Zr(OPrⁱ)₂ with [H(OEt₂)₂][H₂N{B(C₆F₅)₃}₂] in dichloromethane at room temperature gives [Cp₂Zr(OPrⁱ)(HOPrⁱ)]⁺[H₂N{B(C₆F₅)₃}₂]⁻ · Et₂O in high yield. The crystal structure is reported. The complex contains a short Zr-alkoxide and a longer Zr-alcohol bond; the OH group of the coordinated isopropanol is hydrogen-bonded to a diethyl ether molecule. The complex initiates the polymerisation of propylene oxide, most probably via a cationic mechanism.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Katalysatordesaktivierungen bei der Acetylen-Polymerisation mit Titanocen- bzw. Zirconocen-Komplexen des Bis(trimethylsilyl)acetylens

Desactivation of Catalysts in the Polymerization of Acetylene by Bis(trimethylsilyl)acetylene Complexes of Titanocene or Zirconocene Unexpected inactive byproducts were observed in the catalytic polymerization of acetylene using metallocene alkyne complexes Cp₂M(L)(η²-Me₃SiC₂SiMe₃), 1 : M = Ti, without L; 2 : M = Zr, L = thf. The reaction of 1 was investigated in detail by NMR to give quantitatively at –20 °C the titanacyclopentadiene Cp₂Ti–CH=CH–C(SiMe₃)=C(SiMe₃) ( 3 ). Around 0 °C 3 starts to rearrange to yield the dihydroindenyl complex 4 via coupling of one Cp-ligand with the titanacyclopentadiene. In the reaction of 2 under analogous conditions a zirconacyclopentadiene Cp₂Zr–CH=CH–C(SiMe₃)=C(SiMe₃) ( 5 ) and the dimeric complex [Cp₂Zr(C(SiMe₃)=CH(SiMe₃)]₂[μ-σ(1,2)-C≡C] ( 6 ) were observed. Whereas 5 decomposes to a mixture of unidentified paramagnetic species, 6 was isolated and investigated by NMR spectroscopy and X-ray analysis. In the reaction of rac-(ebthi)Zr(η²-Me₃SiC₂SiMe₃) (ebthi = ethylenbistetrahydroindenyl) with 2-ethynyl-pyridine the complex rac-(ebthi)ZrC(SiMe₃)=CH(SiMe₃)](σ-C≡CPy) 7 was obtained, which was investigated by an X-ray analysis.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Interaction of TiF4 with the donor solvents SO2, PhCN, and MeCN: Isolation and structural characterization of the first trimeric fluorine bridged donor-acceptor adduct {TiF4(PhCN)}3

There has been speculations on the structures of TiF₄ polymeric complexes {TiF₄L}_n (L = molecular donor) for several decades, however no structurally characterized examples have been reported. In this work the complex {TiF₄(PhCN)}₃ was isolated from a solution of TiF₄ in PhCN (donor number DN = 11.9 kcal mol⁻¹) as well as from the mixtures PhCN/CH₂Cl₂ and PhCN/toluene and characterized by X-ray, IR, NMR, EI-MS. The structure of the complex {TiF₄(PhCN)}₃ can be regarded as formed by combining three face-TiF₃(PhCN)(μ-F) units, containing octahedrally coordinated titanium centers surrounded by three terminal fluorine atoms on the face of the octahedron and the bridging fluorine atoms in cis-positions with respect to each other. The structure of {TiF₄(PhCN)}₃ represents the first example of a trimeric pseudo pentahalide MX₄L (M = Ti, Zr, X = halogen, D = ligand), a class of potentially interesting Lewis acids. The characterization of {TiF₄(PhCN)}₃ by ¹⁹F NMR revealed that in solution it dissociated to a mixture of [TiF₃(PhCN)₃]⁺, TiF₄(PhCN)₂ and oligomers including [Ti₄F₁₈]²⁻ and {TiF₄(PhCN)}_n. The existence of oligomeric complexes containing face-{TiF₃(PhCN)_3−n(μ-F)_n} (n = 1-3) fragments was established by one- and two-dimensional variable temperature ¹⁹F NMR. In contrast, TiF₄ has a low solubility in SO₂, because the donor strength of SO₂ (DN = 6.5 ± 2.2 kcal mol⁻¹) is too weak to fully convert polymeric TiF₄ into soluble TiF₄-SO₂ donor-acceptor adducts. TiF₄ and MeCN (DN = 14.1 kcal mol⁻¹) formed only the molecular complex TiF₄(MeCN)₂, characterized by preliminary X-ray structure, IR and EI-MS. Thus mononuclear donor-acceptor complexes TiF₄L₂ can only be isolated from MeCN and stronger basic solvents.     

Tuning the sulfur-heterometal interaction in organolead(IV) complexes of [Pt2(μ-S)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with Ph₃PbCl, Ph₂PbI₂, Ph₂PbBr₂ and Me₃PbOAc result in the formation of bright yellow to orange solutions containing the cations [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ (R₃ = Ph₃, Ph₂I, Ph₂Br, Me₃) isolated as PF₆⁻ or BPh₄⁻ salts. In the case of the Me₃Pb and Et₃Pb systems, a prolonged reaction time results in formation of the alkylated species [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = Me, Et). X-ray structure determinations on [Pt₂(μ-S)₂(PPh₃)₄PbMe₃]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PbPh₂I]PF₆ have been carried out, revealing different coordination modes. In the Me₃Pb complex, the (four-coordinate) lead atom binds to a single sulfur atom, while in the Ph₂PbI adduct coordination of both sulfurs results in a five-coordinate lead centre. These differences are related to the electron density on the lead centre, and indicate that the interaction of the heterometal centre with the {Pt₂S₂} metalloligand core can be tuned by variation of the heteroatom substituents. The species [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ display differing fragmentation pathways in their ESI mass spectra, following initial loss of PPh₃ in all cases; for R = Ph, loss of PbPh₂ occurs, yielding [Pt₂(μ-S)₂(PPh₃)₃Ph]⁺, while for R = Me, reductive elimination of ethane gives [Pt₂(μ-S)₂(PPh₃)₃PbMe]⁺, which is followed by loss of CH₄.     

Synthesis and crystal structure of [C6H5Hg(H2NSiMe3)][H2N{B(C6F5)3}2], a phenyl-mercury(II) cation stabilised by a non-coordinating counter-anion

The new heteroleptic mercury(II) complex PhHgN(SiMe₃)₂(1) reacts with the strong Brønsted acid [H(OEt₂)₂][H₂N{B(C₆F₅)₃}₂] with cleavage of a N-Si bond to give [C₆H₅Hg(H₂NSiMe₃)][H₂N{B(C₆F₅)₃}₂] (2), a phenyl-mercury(II) cation stabilised by a primary amine and a non-coordinating counter-anion. Attempts to generate donor-free aryl mercury cations were not successful. The crystal structure of 2 · CH₂Cl₂ shows short π-bonding interactions between the metal and the phenyl ring of a neighbouring cation; the geometry about the mercury(II) atom is nearly linear. The X-ray structures of the new salts [H₂N(SiMe₃)₂ · H₃NSiMe₃][B(C₆F₅)₄]₂ and [Et₃O][H₂N{B(C₆F₅)₃}₂] · CH₂Cl₂ are also presented.     

Synthesis and crystal structure of new layered BaNaSc(BO3)2 and BaNaY(BO3)2 orthoborates

Crystals of two new layered BaNaSc(BO₃)₂ (I) and BaNaY(BO₃)₂ (II) orthoborates are grown from the melt-solution by the spontaneous crystallization onto the platinum loop. Single crystal X-ray analysis showed that the compounds are isostructural with the space group R3¯, a=5.23944(12) and 5.3338(2) Å, and c=34.5919(11) and 35.8303(19) Å for I and II, respectively, Z=6. The distinctive feature of the structure is the close-packed composite anion-cation (Ba,Na)(BO₃) layers. The layers are combined into the base building packages of two types: {M³⁺[Ba²⁺(BO₃)³⁻]₂}⁺ and {M³⁺[Na⁺(BO₃)³⁻]₂}⁻, where M is Sc or Y. Neutral-charge two-package (four-layer) blocks are stacked by the rhombohedral principle into twelve layers of the cubic packing.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Iodination of cisplatin adduct of Vitamin B12 [{B12}-CN-{cis-PtCl(NH3)2}]

The cisplatin adduct of vitamin B₁₂, [{B₁₂}-CN-{cis-PtCl(NH₃)₂}]⁺ (1), reacts with iodide in aqueous solution to form [{B₁₂}-CN-{trans-PtI₂(NH₃)}] (3) in good yield. Mono-substitution of chloride was not observed since a subsequent replacement of one NH₃ by a second iodide is very fast as compared to the Cl⁻ → I⁻ exchange. The same reaction conditions allowed to introduce radioiodide ¹³¹I. Vitamin B₁₂ can therefore be labeled with radionuclides via binding to the Pt(II) center.     

Synthese und Insertionsreaktionen von Cp2′HfCl{As(SiMe3)2} (Cp′ = C5H4Me)

Synthesis and Insertion Reactions of Cp₂′HfCl{As(SiMe₃)₂} (Cp′ = C₅H₄Me) The reaction of Cp₂′HfCl₂ (Cp′ = C₅H₄Me) with Li(THF)_2,5As(SiMe₃)₂ (1 : 1) at room temperature gives the terminal hafnocene arsenido complex Cp₂′HfCl{As(SiMe₃)₂} ( 1 ) in high yield. 1 inserts CS₂ and PhNC into the Hf? As bond yielding Cp₂′HfCl{η²-S₂CAs(SiMe₃)₂} ( 2 ) and Cp₂′HfCl{η²-N(Ph)CAs(SiMe₃)₂} ( 3 ). The thermally sensitive complexes 1–3 were characterised spectroscopically and crystal structure determinations were carried out on 1 and 3 which shows the η² bonding mode of the N(Ph)CAs(SiMe₃)₂ ligand in the latter.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Infrared and Raman studies of the anion ordering transitions in paramagnetic organometallic radical cation salts [Cp2Mo(dmit)]X (X = PF6, SbF6)

Temperature dependence of infrared and Raman spectra of the two isostructural salts [Cp₂Mo(dmit)]PF₆ and [Cp₂Mo(dmit)]SbF₆ is studied. At room temperature the physical properties of both compounds are very similar but at lower temperatures they undergo phase transitions associated with anion ordering, which are surprisingly different. The phase transitions in [Cp₂Mo(dmit)]PF₆ salt at T₁ = 120 K and T₂ = 89 K have no important influence on infrared and Raman spectra, while the phase transition in [Cp₂Mo(dmit)]SbF₆ salt at T₁ = 175 K causes a splitting of Raman bands assigned to the CC stretching at about 1334 cm⁻¹ and the in-plane Mo(dmit) ring deformation at about 353 cm⁻¹, and also an infrared band at about 939 cm⁻¹ related to the C-S stretching. The splitting of vibrational bands demonstrates a clear distortion of [Cp₂Mo(dmit)]⁺ cations in the [Cp₂Mo(dmit)]SbF₆ salt. This molecular distortion is related to a lattice distortion providing thus a good argument for applicability of the compressible model of the anion ordering transition.     

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH CpCH2CH2CH=CH2)2MCl2(M=Zr,Hf)AND Cp2ZrCl2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ~(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

Reaction of aryl azides with tris(trimethylsilyl)silyllithium: Synthesis of tmeda or thf adducts of [Li{N(Ar)Si(SiMe3)3}] and 1,4-trimethylsilyl migration from oxygen to nitrogen

Reaction of ArN₃ (Ar = Ph, p-MeC₆H₄, 1-naphthyl) with [Li{Si(SiMe₃)₃}(thf)₃] yielded lithium amides [Li{N(Ar)Si(SiMe₃)₃}L] (L = tmeda or (thf)₂). Similar treatment of o-phenylene diazide with 2 equiv. of [Li{Si(SiMe₃)₃}(thf)₃] formed dilithium diamide complex 4. Reaction between o-Me₃SiOC₆H₄N₃ and [Li{Si(SiMe₃)₃}(thf)₃] afforded, via 1,4-trimethylsilyl migration from oxygen to nitrogen, [Li{OC₆H₄{N(SiMe₃)Si(SiMe₃)₃}-2}]₂ (5). The structures of complexes 3 and 5 have been determined by single crystal X-ray diffraction techniques.     

Synthesis and characterisation of [AlMen{Si(SiMe3)3}3−n(thf)] (n = 1 or 2)

The crystalline compounds [AlMe_n{Si(SiMe₃)₃}_3−n(thf)] [n = 2 (1) or 1 (2)] were prepared from the lithium sisyl [Li{Si(SiMe₃)₃}(thf)₃] (A) and the appropriate methylaluminium chloride [AlCl_3−nMe_n] in thf. The X-ray structure of 1 is reported. Unlike A or a magnesium sisyl [Mg{Si(SiMe₃)₃}₂(thf)₂] (B), neither 1 nor 2 underwent an insertion reaction with an α-H-free nitrile.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Thermal decomposition of organo-bielemental vanadium compounds Cp2V(ER3) (ER3 - GeEt3, SnEt3, CH2SiMe3 SeGeEt3)

The thermal decompositon of a number of organo-bielemental vanadium compounds with the general formula Cp₂V(ER₃) (ER₃ - GeEt₃, SnEt₃, CH₂SiMe₃, SeGeEt₃) has been investigated in solids and in solution. The main decomposition products of Cp₂V(SnEt₃) are vanadocene and hexaethyldistannane. Et₃GeH, Et₃GeCp, Cp₂V and CpV(C₅H₄GeEt₃) are formed from Cp₂V (GeET₃) decomposition. Isolated CpV(C₅H₄GeEt₃) is characterized by IR and mass spectra. The decomposition of Cp₂V(CH₂SiMe₃) is accompanied by Me₄Si, Cp₂V and CpV-(C₅H₄CH₂SiMe₃) formation, the latter is identified from the mass spectrum. Triethylgermane, vanadocene, and a diselenide of vanadium are isolated on decomposition of Cp₂V(SeGeEt₃). Based upon the experimental data, mechanisms for the decompositon are proposed.