Rhodium assisted CH activation of N-(2′-hydroxyphenyl)benzaldimines. Synthesis, structure and electrochemical properties of a group of organorhodium complexes

Reaction of a group of N-(2′-hydroxyphenyl)benzaldimines, derived from 2-aminophenol and five para-substituted benzaldehydes (the para substituents are OCH₃, CH₃, H, Cl and NO₂), with [Rh(PPh₃)₃Cl] in refluxing toluene in the presence of a base (NEt₃) afforded a family of organometallic complexes of rhodium(III). The crystal structure of one complex has been determined by X-ray crystallography. In these complexes the benzaldimine ligands are coordinated to the metal center, via dissociation of the phenolic proton and the phenyl proton at the ortho position of the phenyl ring in the imine fragment, as dianionic tridentate C,N,O-donors, and the two PPh₃ ligands are trans. The complexes are diamagnetic (low-spin d⁶, S = 0) and show intense MLCT transitions in the visible region. Cyclic voltammetry shows a Rh(III)Rh(IV) oxidation within 0.63-0.93 V vs SCE followed by an oxidation of the coordinated benzaldimine ligand. A reduction of the coordinated benzaldimine is also observed within −0.96 to −1.04 V vs SCE. Potential of the Rh(III)Rh(IV) oxidation is found to be sensitive to the nature of the para-substituent.     

Facile hydrosilylation of norbornadiene by silanes R3SiH and R2SiH2 with molybdenum catalysts

Photochemically activated [Mo(CO)₆] and [Mo(CO)₄(η⁴-nbd)] have been demonstrated to be very effective catalysts for hydrosilylation of norbornadiene (nbd) by tertiary (Et₃SiH, Cl₃SiH) and secondary (Et₂SiH₂ and Ph₂SiH₂) silanes to give 5-silyl-2-norbornene, which under the same reaction conditions transform in ring-opening metathesis polymerization (ROMP) to unsaturated polymers and to a double hydrosilylation product, 2,6-bis(silyl)norbornane. The yield of a particular reaction depends very strongly on the kind of silane involved. The reaction products were identified by means of chromatography (GC–MS) and ¹H and ¹³C NMR spectroscopy. In photochemical reaction of [Mo(CO)₄(η⁴-nbd)] and Ph₂SiH₂ in cyclohexane-d₁₂, η²-coordination of the SiH bond to the molybdenum atom is supported by ¹H NMR spectroscopy due to the detection of two equal-intensity doublets with ²J_HH = 5.4 Hz at δ 6.12 and −5.86 ppm.     

The selective oxidation of ethanol to CO2 at Ptpc/Ir/Pt metallic multilayer nanostructured electrodes

In this work, Pt_pc/Ir/Pt metallic multilayer nanostructured electrodes were prepared. The composition and number of the constituent metal layers were varied and the number of Ir and Pt layers studied were: 1.5:1.5, 1.5:10, 10:1.5, 10:10 and 250:250 Ir and Pt monolayers. The ethanol electrooxidation reaction and its products was studied using electrochemical in situ FTIR technique and could be observed as a selective cleavage of the ethanol CC bond in acidic electrolyte. Neither acetaldehyde nor acetic acid IR band could be observed for ethanol electrooxidation at 1.5 V vs. RHE over Pt_pc/Ir₂₅₀/Pt₂₅₀ metallic multilayer electrodes. Also, the enhancement on CO₂ production over this electrode was more than six times the amount observed using the Pt_pc electrodes. Thus, the complete CC cleavage bond in ethanol molecule was observed, leading only CO₂ as reaction product.     

Functionalized fluoroalkyl and alkenyl silanes: Preparations, reactions, and synthetic applications

Preparations, reactions, and synthetic applications of functionalized fluoroalkyl and alkenyl silanes have been summarized. This review focuses mainly on the chemistries of (1) 1-substituted difluoromethylsilanes (XCF₂SiR₃), (2) 1-substituted 2,2-difluorovinylsilanes (CF₂CXSiR₃), (3) trifluoroisopropenyl, trifluoroacetimidoyl, and trifluoroacetyl silanes [CF₃C(SiR₃)X, XCH₂, NAr, O] and (4) other fluorinated alicyclic silanes.     

Ruthenium carbene complexes containing bidentate and tridentate PO ligands

Treatment of [Ru(CHR)Cl₂(PCy₃)₂] (Cy = cyclohexyl) with Tl[N(Pr₂ⁱPO)₂] and AgL_OEt (L_OEt⁻ = [CpCo{P(O)(OEt)₂}₃]⁻) afforded the Ru carbene complexes [Ru(CHPh)(PCy₃)Cl{N(Pr₂ⁱPO)₂}] (1) and [L_OEtRu(CHR)(PCy₃)Cl] (2), respectively. Chloride abstraction of complex 2 with TlPF₆ in MeCN afforded [L_OEtRu(CHPh)(PCy₃)(MeCN)][PF₆] (3). Complexes 1 and 2 are capable of catalyzing ring-closing metathesis of diethyl 1,2-diallylmalonate. The crystal structure of complex 2 has been determined.     

Homogeneous and supported copper(II) acetate as catalyst for CO coupling reactions

The reactivity of copper(II) acetate as catalyst in a standard CO coupling reaction has been systematically evaluated. Optimization of the reaction conditions resulted in a protocol involving stoichiometric amounts of reagents, a substoichiometric amount of base and 20 mol% catalyst, at 50 °C in 1,2-dichloroethane and under 1 atm O₂. Next, the reactivity of polymer-supported copper(II) acetate was evaluated. Although it is found that, in contrast to previous results obtained in related CN coupling reactions, the polymer-supported catalyst is in this case less efficient than the corresponding homogeneous one, the catalyst turns out to be conveniently recovered from the reaction mixture by simple filtration.     

Preparation of fluorine compounds of groups 13 and 14: a study case for the diagonal relationship of aluminum and germanium

The synthesis of carbaalanes of composition [(AlF)₆(AlNMe₃)₂(CR)₆] containing terminal fluorine atoms is described. The clusters have in common that the central core consists of eight aluminum and six carbon atoms. Six of the eight aluminum atoms are bearing six terminal fluorine atoms. The fluorination of (t-BuNCH₂AlH)₄ results in the formation of the aggregate (t-BuNCH₂AlF)₄. In group 14, the fluorine containing unsaturated compounds LGeF, LGeS(F), LGeSe(F), and LGeNSiMe₃(F) were prepared (LHC(CMeNAr)₂), Ar = 2,6-iPr₂C₆H₃ and Ar = 2,6-Me₂(C₆H₃)).     

Reactions of (Me2C)(Me2Si)[(η-C5H3)Mo(CO)3]2 with nitrile and subsequent cleavage of the CN bond by cooperation of molybdenum and ruthenium

Reaction of the doubly bridged dinuclear molybdenum complex (Me₂C)(Me₂Si)[(η⁵-C₅H₃)Mo(CO)₃]₂ (1) with benzonitrile in refluxing xylene afforded complexes (Me₂C)(Me₂Si)[(η⁵-C₅H₃)₂Mo₂(CO)₄(μ-η²-η²(⊥)-NCPh)] (2) (50%) and (Me₂C)(Me₂Si)[(η⁵-C₅H₃)₂Mo₂(CO)₄(μ-η¹-η²-NCPh)] (3) (6%) with different coordination of nitrile. The corresponding μ-η²-η² acetonitrile and propionitrile complexes 4 and 5 could be obtained from the reactions of (Me₂C)(Me₂Si)(C₅H₄)₂ with (RCN)₃Mo(CO)₃ (R = Me, Et) in refluxing xylene. Reactions of 1 with isonitriles generated μ-η¹-η²-CNR (R = ^tBu, Ph, C₆H₁₁) bridged complexes 6-8 in 53-63% yields. Subsequent reaction of 4 with Ru₃(CO)₁₂ yielded two CN bond cleavaged MoRu clusters (Me₂C)(Me₂Si)(η⁵-C₅H₃)₂Mo₂Ru₃(CO)₁₀(μ-CO)(μ₃-CMe)(μ₄-N) (9) (7%) and [(Me₂C)(Me₂Si)(η⁵-C₅H₃)₂]₂Mo₄Ru₆(CO)₁₆(μ-CO)(μ₄-CO)₂(μ₃-η¹-η²-η²-NCMe)(μ₃-CMe)(μ₅-N) (10) (8%). All the new complexes have been fully characterized. The molecular structures of 2, 4, 6, 9, and 10 have been determined by X-ray diffraction analysis.     

Phosphorus-supported multidentate coumarin-containing fluorescence sensors for Cu

Phosphorus hydrazides PhP(O)[N(Me)NH₂]₂, (S)P[N(Me)NH₂]₃, and N₃P₃[N(Me)NH₂]₆ were condensed with 7-diethylaminocoumarin-3-aldehyde (RCHO) to afford the corresponding hydrazones PhP(O)[N(Me)NCHR]₂ (1), (S)P[N(Me)NCHR]₃ (2), and N₃P₃[N(Me)NCHR]₆ (3). The structural characterization of 1-3 was carried out by their HRMS, ¹H and ³¹P{¹H} NMR spectra. The molecular structure of 2 was established by a single-crystal X-ray analysis. Interaction of 1 and 2 with various transition metal ions revealed substantial fluorescence enhancement upon interaction with Cu²⁺ enabling a selective detection mechanism for this metal ion. However, such a fluorescence enhancement was not observed in the case of 3. A 1:1 complex [2·Zn][ClO₄]₂·4CH₂Cl₂ was isolated in the reaction of 2 with Zn(ClO₄)₂·6H₂O. The molecular structure of this complex revealed that the Zn^II is encapsulated by the ligand utilizing a 3N, 3O coordination set.     

Synthesis, structure, and magnetic properties of 2,2′-(buta-1,3-diyne-1,4-diyl)bis(4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole 3-oxide 1-oxyl)

An approach to the synthesis of nitronyl nitroxide 2,2′-(buta-1,3-diyne-1,4-diyl)bis(4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole 3-oxide 1-oxyl) (4) was developed. Compound 4 is the first diradical with nitronyl nitroxide groups directly linked through a diacetylene fragment. In solid phase the diradicals are arranged in stacks with parallel CC fragments, with the distances between the terminal carbon atoms of the neighboring diacetylene groups (T and d) being 6.170 and 4.466 Å, respectively, and the angle between the translation vector and the median line passing through the CCCC fragment of 45.9°. The values of T and d are outside the range of structural criteria allowing a topochemical reaction. Thus UV irradiation does not initiate solid phase polymerization of 4. After exposure at 373 K for 1 h the crystals of 4 turn dark-brown, become X-ray amorphous and lose the majority of their paramagnetic centers without significantly changing their mass. Upon further heating up to 400-420 K the product explodes, releasing about 360 kJ/mol of heat. A diluted solution of 4 in 1,4-dioxane produces an EPR spectrum typical of a strong exchange (a multiplet of nine broadened lines with A_4N = 0.35 mT), indicating the efficiency of the CCCC fragment as an exchange channel. The character of the experimental μ_eff(T) dependence for 4 indicates a strong intramolecular antiferromagnetic-type exchange interaction (J/k_B ∼ −104 K) and the dominating weak intermolecular ferromagnetic exchange.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.