o-Phenylene-bridged Cp/amido titanium and zirconium complexes and their polymerization reactivity

o-Phenylene-bridged trimethylcyclopentadienyl/amido titanium complexes [(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]TiCl₂ (18, R = CH₃; 19, R = CH₂CH₃; 20, R = CH₂C(CH₃)₃; 21, R = CH₂(C₆H₁₁)) and zirconium complexes {[(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]ZrCl-μCl}₂ (22, R = CH₃; 23, R = CH₂CH₃; 24, R = CH₂C(CH₃)₃; 25, R = CH₂(C₆H₁₁); 26, R = C₆H₁₁; 27, R = CH(CH₂CH₃)₂) are prepared via a key step of the Suzuki-coupling reaction between 2-dihydroxyboryl-3-methyl-2-cyclopenten-1-one (2) and the corresponding bromoaniline compounds. The molecular structures of titanium complexes 18 and 19 and dinuclear zirconium complexes 24 and 26 were confirmed by X-ray crystallography. The Cp(centroid)-Ti-N and Cp(centroid)-Zr-N angles are smaller, respectively, than those observed for the Me₂Si-bridged complex [Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂ and its Zr-analogue, indicating that the o-phenylene-bridged complexes are more constrained than the Me₂Si-bridged complex. Titanium complex 19 exhibits comparable activity and comonomer incorporation to the CGC ([Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂) in ethylene/1-octene copolymerization. Complex 19 produces a higher molecular-weight polymer than CGC.     

Synthesis, structure and ethylene polymerization behavior of titanium phosphinoamide complexes

(Phosphinoamide)(cyclopentadienyl)titanium(IV) complexes of the type Cp*TiCl₂(η²-Ph₂PNR) [Cp*=C₅Me₅; R = t-Bu (2a), R = n-Bu (2b), R = Ph (2c)] have been prepared by the reaction of Cp*TiCl₃ with the corresponding lithium phosphinoamides. The structure of Cp*TiCl₂(η²-Ph₂PN^tBu) (2a) and Cp*TiCl₂(η²-Ph₂PNPh) (2c) have been determined by X-ray crystallography. These complexes exhibited moderate catalytic activities for ethylene polymerization in the presence of modified methylaluminoxane (MMAO). Catalytic activity of up to 2.5 × 10⁶ g/(mol Ti h) was observed when activated by i-Bu₃Al/Ph₃CB(C₆F₅)₄.     

New o-methoxyphenylcyclopentadienylchromium (III) complexes: Synthesis, structures and catalytic properties for ethylene polymerization

Two new ligands 1-(2-methoxyphenyl)-3,4-diphenylcyclopentadiene (1) and 1-(2-methoxyphenyl)-2,3,4,5-tetramethylcyclopentadiene (2), as well as their corresponding cyclopentadienylchromium complexes η⁵-1-(2-methoxyphenyl)-3,4-diphenylcyclopentadienyl chromium dichloride (3) and η⁵-1-(2-methoxyphenyl)-2,3,4,5-tetramethylcyclopentadienyl chromium dichloride (4) were synthesized and characterized. Molecular structures of 3 and 4 were determined by single-crystal X-ray diffraction. Complexes 3 and 4 were tested as catalyst precursors for ethylene polymerization. When activated with Al(ⁱBu)₃ and , complex 3 shows reasonable catalytic activity while 4 exhibits high catalytic activity for ethylene polymerization. The effects of temperature and Al/Cr ratio on the catalytic activity were studied. The molecular weight and melting temperature of the produced polyethylenes were determined.     

Synthesis and reactivity of di(silylamido)cyclopentadienyl titanium and zirconium complexes

We present in this account the synthesis and recent developments of a new class of group 4 metal complexes with the tridentate di(silylamido)cyclopentadienyl ligand. These doubly silyl-bridged group 4 metal amido chelates are receiving increasing interest as they are efficient catalysts for ethene polymerization when activated with MAO despite generating 14-electron d⁰ cationic species free of the alkyl group required for the first insertion reaction in the polymerization process.     

Synthesis of chiral titanium-containing phosphinoamide ligands for enantioselective heterobimetallic catalysis

The synthesis of six chiral titanium-containing phosphinoamide ligands is discussed. These ligands assemble chiral heterobimetallic Pd–Ti complexes, enable enantioselective intramolecular allylic aminations with hindered amine nucleophiles and achieve selectivity up to 53% ee. Mechanistic studies demonstrate the reversibility of the enantio-determining C–N bond forming step, which leads to a gradual increase in the % ee of the reaction over time. These results represent a rare example of enantioselective heterobimetallic catalysis and suggest that these new ligands could find broad application in enantioselective transition metal catalysis.     

Effect of ligand in ethylene/styrene copolymerization by [Me2Si(C5Me4)(NR)]TiCl2 (R = tert-Bu, cyclohexyl) and (1,3-Me2C5H3)TiCl2(O-2,6-Pr2C6H3)-MAO catalyst system

Copolymerization of ethylene with styrene using linked cyclopentadienyl-amide titanium(IV) complexes, [Me₂Si(C₅Me₄)(R)]TiCl₂ [R=tert-Bu (1), cyclohexyl (2)], and non-bridged (1,3-Me₂C₅H₃)TiCl₂(O-2,6-ⁱPr₂C₆H₃) (3)-MAO catalysts have been explored. Although the catalytic activity by 2 was lower than 1, 2 showed more efficient styrene incorporation than 1 under the same conditions. Moreover, the resultant copolymer prepared by 2 possessed completely different microstructure from those by 1, indicating that the nature of amide ligand affects both styrene incorporation and monomer sequence.     

A study of ortho- and para-siloxyanilines for the synthesis of mono-, bi-, and tetra-nuclear early transition metal–imido complexes

The siloxyanilines o-Me₃SiOC₆H₄NH₂ (1) and p-RMe₂SiOC₆H₄NH₂ (R=H (2); R=Me (3)), and their N-silylated derivatives p-Me₃SiOC₆H₄NHSiMe₃ (4) and p-Me₃SiOC₆H₄N(SiMe₃)₂ (5) have been prepared from ortho- or para-aminophenol and used in the synthesis of imido complexes. Thus, binuclear [{Ti(η⁵-C₅H₅)Cl}{μ-NC₆H₄(p-OSiMe₃)}]₂ (6) and mononuclear [TiCl₂{NC₆H₄(p-OSiMe₃)}(py)₃] (7) imido complexes have been obtained from the reaction of 3 and [Ti(η⁵-C₅H₅)Cl₃] or [TiCl₂(N^tBu)(py)₃], respectively. In contrast, the reaction of 1 with TiCl₄ and ^tBupy affords the titanocycle [TiCl₂{OC₆H₄(o-NH)---N,O}(^tBupy)₂] (8). Compound 5 has also been used to prepare the niobium imide complex [NbCl₃{NC₆H₄(p-OSiMe₃)}(MeCN)₂] (9), by its reaction with NbCl₅ in CH₃CN. These findings have been applied to the synthesis of polynuclear systems. Thus, chlorocarbosilane Si[CH₂CH₂CH₂Si(Me)₂Cl]₄ (CS–Cl) has been functionalized with the ortho- and para-aminophenoxy groups to give 10 and 11, respectively. The use of 11 has allowed the formation of the tetranuclear compound 12. Attempts to synthesize terminal imido titanium complexes from 10 and TiCl₄ in the presence of ^tBupy and Et₃N, give complex 8 and carbosilane CS–Cl.     

Synthesis and characterization of cyclopentadienyl/alkoxo titanium dichlorides: structural analysis of monocyclopentadienyl titanium dichlorides with ligands derived from menthol and borneol

A variety of monocyclopentadienyl alkoxo titanium dichloride and bisalkoxo titanium dichloride complexes have been prepared and characterized by spectroscopic techniques. The titanium derivatives containing both cyclopentadienyl and various alkoxo ligands [Ti(η⁵-C₅H₅)(OR)Cl₂] (1-5) have been synthesized from the reaction of [Ti(η⁵-C₅H₅)Cl₃] with 1 equivalent of the corresponding alcohol in THF in the presence of triethylamine (ROH = Adamantanol, 1R,2S,5R-(−)-menthol, 1S-endo-(−)-borneol, cis-1,3-(−)-benzylideneglycerol, 1,2:3,4-di-O-isopropylidene-α-d-galactopyranose). The bisalkoxo titanium dichloride derivatives [TiCl₂(OR)₂] (6-10) have been prepared by a redistribution reaction between Ti(OR)₄ and TiCl₄ compounds 6-8 (OR = Adamantanoxy, (1R,2S,5R)-(−)menthoxy, (1S-endo)-(−)-borneoxy) and by reaction of [Ti(OR)₂(OPrⁱ)₂]₂ with CH₃COCl compounds 9 and 10 (OR = 1,2:3,4-di-O-isopropylidene-α-d-galactopyranoxy, and 1,2:5,6-di-O-isopropylidene-α-d-glucofuranoxy). The molecular structures of 2 and 3 have been determined by single crystal X-ray diffraction studies.     

Synthesis and crystal structures of two (cyclopentadienyl)titanium(III) hydroborate complexes, [CpTiCl(BH4)]2 and Cp2Ti(B3H8)

Treatment of Cp^∗TiCl₃ and Cp₂TiCl₂ with NaB₃H₈ affords the titanium(III) hydroborate compounds [Cp^∗TiCl(BH₄)]₂ and Cp₂Ti(B₃H₈), respectively. The former compound arises by means of a new reaction, the metal-induced fragmentation of the B₃H₈ anion, and can also be made by treating Cp^∗TiCl₃ with LiBH₄. The latter compound has been previously described, but not characterized crystallographically. Both compounds have been studied by single crystal X-ray diffraction. Dimeric [Cp^∗TiCl(BH₄)]₂ has bridging chloride ligands and terminal Cp^∗ and BH₄ ligands. The Ti-Ti distance is 3.452(1) Å, which indicates that there is no metal-metal bonding interaction. The Ti-Cl distances are 2.440(2) Å and the Ti-Cl-Ti and Cl-Ti-Cl angles of 89.97(8) and 90.03(8)° so that the Ti₂Cl₂ unit is nearly a perfect square. The BH₄ groups are each tridentate, with a Ti-B distance of 2.220(9) Å and an average Ti-H distance of 1.98(5) Å. In Cp₂Ti(B₃H₈), the B₃H₈ ligand is bidentate, as is usually seen, and the Ti-B and Ti-H distances are 2.600(3) and 1.96(2) Å. The dihedral angle between the Ti-B(1)-B(2) plane and the B(1)-B(2)-B(3) plane is 123.4°. The Ti-B distances are 0.04 Å longer than those in niobium analog, Cp₂Nb(B₃H₈), despite the fact that the single bond metallic radius of Ti is 0.02 Å smaller than that of Nb. This lengthening of the bond is probably a consequence of the presence of one fewer skeletal bonding electron in Cp₂Ti(B₃H₈).     

How to synthesize a constrained geometry catalyst (CGC) - A survey

Since the discovery of titanium- and zirconium complexes with linked cyclopentadienyl amido ligands, this new polymerization catalyst class (constrained geometry catalysts “CGCs”) has attracted the interest of many research groups in industry and academia. In order to improve or modify the catalytic and polymer properties, numerous changes in the environment of the catalyst have produced a huge family of CGCs. The aim of this contribution is to provide a concise overview on synthetic entries to these structurally highly diverse catalysts - an organometallic guide to CGCs.     

Studies on monocyclopentadienyl titanium(IV) dithiocarbamato complexes

Titanium(IV) dithiocarbamato complexes of the typesCpTi(S₂CNHR)Cl₂ andCpTi(S₂CNHR)₂Cl, whereR=C₈H₅N₂S, C₉H₅N₂SCl₂ and C₉H₇N₂S, have been prepared by the reaction of monocyclopentadienyl titanium(IV) trichloride with the potassium salt of the appropriate dithiocarbamic acid in anhydrous dichloromethane. Conductance and infrared studies indicate that these complexes are non-electrolytes in which all dithiocarbamate ligands are bidentate. Therefore, 5 and 6 coordinate structures can be assigned toCpTi(S₂CNHR)Cl₂ andCpTi(S₂CNHR)₂Cl complexes, respectively.¹H-NMR spectra indicate that there is rapid rotation of the cyclopentadienyl ring about the metal ring axis.

---

Untersuchungen von Monocyclopentadienyl-titan(IV)-dithiocarbamat-Komplexen

Zusammenfassung Es wurden Titan(IV)-dithiocarbamat-Komplexe vom TypCpTi(S₂CNHR)Cl₂ undCpTi(S₂CNHR)₂Cl mitR=C₈H₅N₂S, C₉H₅N₂SCl₂ und C₉H₇N₂S mittels der Reaktion von Monocyclopentadienyltitan(IV)trichlorid mit dem Kaliumsalz der entsprechenden Dithiocarbaminsäure in wasserfreiem Dichlormethan dargestellt. Leitfähigkeitsmessungen und IR-Untersuchungen zeigen, daß diese Komplexe Nichtelektrolyte sind, bei denen alle Dithiocarbamat-Liganden zweizähnig sind. Demnach können 5-, bzw. 6-koordinierte Strukturen für die Komplexe des TypsCpTi(S₂CNHR)Cl₂, bzw.CpTi(S₂CNHR)₂Cl angenommen werden. Die¹H-NMR Spektren zeigen eine rasche Rotation des Cyclopentadienylrings um die Metall-Ring Achse an.

     

Dinuclear titanium complexes with methylphenylsilylene bridge between cyclopentadienyl rings. Synthesis, characterization and reactivity towards ethylene

The new ansa-titanocene dichloride [{(SiMePh)(η⁵-C₅H₄)₂}TiCl₂] (1) was prepared by one pot reaction, whereas synthesis of its methylated analogue [{(SiMePh)(η⁵-C₅Me₄)₂}TiCl₂] (3) was performed in two steps with isolation of corresponding silane intermediate SiMePh(HC₅Me₄)₂ (2). The reaction of 1 and 3 with TiCl₄ afforded the dinuclear complexes [(SiMePh){(η⁵-C₅R₄)TiCl₃}₂] (R = H (4) and R = Me (5)). The catalysts formed from 4 and 5 after their activation with excess MAO exhibited a modest activity in ethylene polymerization. The polymer products consisted of high molar mass linear polyethylenes with a broad molar mass distribution. The presence of three paramagnetic titanium species in the mixture 4/MAO was revealed by EPR spectroscopy. All new prepared compounds 1-5 were characterized by multinuclear NMR, EI-MS, IR, and solid-state structures of 1, 3 and 5 were determined by X-ray single crystal diffraction.     

Synthesis and characterization of phosphorous-bridged bisphenoxy titanium complexes and their application to ethylene polymerization

Phosphorous-bridged bisphenoxy titanium complexes were synthesized and their ethylene polymerization behavior was investigated. Bis[3-tert-butyl-5-methyl-2-phenoxy](phenyl)phosphine tetrahydrofuran titanium dichloride (4a) was obtained by treatment of 3 equiv of n-BuLi with bis[3-tert-butyl-2-hydroxy-5-methylphenyl](phenyl)phosphine hydrochloride salt (3a) followed by TiCl₄(THF)₂ in THF. THF-free complexes 5a-5d were synthesized more conveniently by the direct reaction of MOM-protected ligands (2a-2d) with TiCl₄ in toluene. X-ray analysis of 4a revealed that the ligand is bonded to the octahedral titanium (IV) center in a facial fashion and two chlorine atoms possess cis-geometry. Complexes 4a and 5a-5d were utilized as catalyst precursors for ethylene polymerization. Complex 5c gave high molecular weight polyethylene (M_w = 1,170,000, M_w/M_n = 2.0) upon activation with Al(ⁱBu)₃/[Ph₃C][B(C₆F₅)₄] (TB). Ethylene polymerization activity of 5d activated with Al(ⁱBu)₃/TB reached 49.0 × 10⁶ g mol (cat) ⁻¹ h⁻¹.     

Synthesis, characterization, and ethylene polymerizations of various N-O chelated mono Cp titanium complexes

Various mono Cp^∗ type titanium mononuclear complexes (1-5) and dinuclear complexes (6 and 7) containing non-Cp type chelate ligand, picolinate group, which has multi-binding sites of N and O atoms were synthesized and fully characterized by ¹H and ¹³C NMR spectroscopy, mass spectroscopy, elemental analysis, and X-ray diffraction study. The 1 and 2/MMAO catalytic systems for ethylene polymerization exhibited a moderate activity and gave the polyethylenes with broad molecular weight distributions.     

Substituted cyclopentadienylchromium(III) complexes containing neutral donor ligands. Synthesis, crystal structures and reactivity in ethylene polymerization

Lithium derivatives of substituted cyclopentadiene ligands reacted with CrCl₃(THF)₃ in THF solution to afford homodinuclear complexes of the type [{(η⁵-RCp)CrCl(μ-Cl) }₂] [R=SiMe₃ (1), CH₂C(Me)CH₂ (2)]. Complex 1 reacts with pyrazole (C₃H₄N₂) to yield the mononuclear half-sandwich complex [(η⁵-Me₃SiCp)CrCl₂(pyrazole)] (3). The similar complex [Cp*CrCl₂(pyrazole)] (4) was synthesised by reaction of [{Cp*CrCl(μ-Cl)}₂] with pyrazole. Complex 2 reacts with bidentate ligands to give binuclear complexes of the type [{(η⁵-CH₂C(Me)CH₂Cp)CrCl₂ }₂(μ-L-L)] [L-L=Ph₂PCH₂CH₂PPh₂ (5), trans-Ph₂P(O)CHCHP(O)Ph₂ (6)]. All complexes were structurally characterised by X-ray diffraction. After reaction with methylaluminoxane these complexes are active in the polymerization of ethylene. At 25 °C and 4 bar of ethylene, complex 3 yields polyethylene with a bimodal molecular weight distribution centred at 155,000 and 2000 g/mol. Complex 4 shows similar activity, yielding only the low molecular weight fraction. On the other hand, the binuclear complexes 5 and 6 under the same conditions were three times more active than mononuclear complexes. The melting point of the polymers indicates the formation of linear polyethylene.     

Constrained geometry complexes of titanium (IV) and zirconium (IV) involving cyclopentadienyl fused to thiophene ring

Constrained geometry complexes (CGCs) of titanium (IV) and zirconium (IV) containing isomeric cyclopentadienyls fused to thiophene fragment, i.e., 4,5-dimethylcyclopenta[b]thienyl and 5,6-dimethylcyclopenta[b]thienyl, have been prepared and unambiguously characterized. The molecular structure of the titanium complex [η⁵-(5,6-dimethylcyclopenta[b]thienyl)SiMe₂(N^tBu)-η¹]TiCl₂ was established by X-ray crystal structure analysis. Preliminary studies showed that the studied CGCs/MAO are active olefin polymerization catalysts.     

Synthesis and reactivity of mixed-ring indenyl complexes of molybdenocene

The complex [IndCpMo(NCMe)₂][BF₄]₂ provides a suitable entry to the synthesis of IndCpMoBr₂ and IndCpMoMe₂. The latter, also available from IndCpMoX₂ (X = Cl, Br) and MeMgCl, reacts with HCl to give IndCpMoCl(Me) which, in turn reacts with NaSPh to yield IndCpMo(SPh)(Me). Cyclic voltammetry shows that these three alkyl complexes undergo a 1e reversible oxidation to 17 e Mo^V cations. IndCpMoCl(Me) is oxidized by [Cp₂Fe]BF₄ to afford [IndCpMoCl(Me)]BF₄ in 95% yield. Reaction of [IndCpMo(NCMe)₂][BF₄]₂ with KBPz₄ in CH₂Cl₂/NMF leads to [IndCpMo(κ²-BPz₄)]BF₄. Taken together with previous reports these results show that the indenyl ring slows down substitutional chemistry at the fragment (Cp′ = Cp, Ind) by steric reasons, overshadowing any acceleration due to a possible indenyl effect.     

Syntheses and structures of missing links among polybromocyclopentadienyl rhenium and manganese tricarbonyl complexes

Reactions of diazocyclopentadiene and NBS at appropriate stoichiometries give 2,5-dibromodiazocyclopentadiene and 2,3,5-tribromodiazocyclopentadiene in 40% and 30% yields, respectively, after chromatography. These react with BrRe(CO)₅ or BrMn(CO)₅ (80 °C, CF₃C₆H₅) to give (η⁵-1,2,3-C₅H₂Br₃)M(CO)₃ (3; M = a, Re; b, Mn) and (η⁵-C₅HBr₄)M(CO)₃ (4a,b) in 75-85% yields. In the case of 4a, the intermediate η¹-cyclopentadienyl complex (η¹-C₅HBr₄)Re(CO)₅ (4′a) can be isolated (44%). An isomer of 3b, (η⁵-1,2,4-C₅H₂Br₃)Mn(CO)₃, is accessed by desilylating previously reported (η⁵-1,2,4-C₅(SiMe₃)₂Br₃)Mn(CO)₃ with CsF/MeOH (85%). The reaction of tetrabromodiazocyclopentadiene and BrRe(CO)₅ at 80 °C in CF₃C₆H₅ gives the η¹-cyclopentadienyl complex (η¹-C₅Br₅)Re(CO)₅ (5′a, 74%) which cannot be induced to decarbonylate to (η⁵-C₅Br₅)Re(CO)₃ (5a) under a variety of conditions. However, 5a can be isolated (45%) when a similar reaction is conducted at 120 °C. The IR properties of the preceding complexes are compared, and the crystal structures of 3a, 3b, 5a, and 5′a are determined and analyzed.     

Synthesis,structure and ethylene polymerization of group 4 complexes with phosphinoamide ligands

Group 4 complexes containing diphosphinoamide ligands [Ph₂PNR]₂MCl₂ (3: R = ^tBu, M = Ti; 4: R = ^tBu, M = Zr; 5: R = Ph, M = Ti; 6: R = Ph, M = Zr) were prepared by the reaction of MCl₄ (M = Ti; Zr) with the corresponding lithium phosphinoamides in ether or THF. The structure of [Ph₂PN^tBu]₂TiCl₂ (3) was determined by X‐ray crystallography. The phosphinoamides functioned as η²‐coordination ligands in the solid state and the Ti? N bond length suggests it is a simple single bond. In the presence of modified methylaluminoxane or i‐Bu₃Al/Ph₃BC(C₆F₅)₄, catalytic activity of up to 59.5 kg PE/mol cat h bar was observed. Copyright © 2005 John Wiley & Sons, Ltd.