4-Chloro-5-methyl-3-diphenylphosphino-1-phenyl-1,2,3,6-tetrahydrophosphinine as a bidentate P-ligand in a cis chelate Pt(II) complex

Double deoxygenation of a 3-phosphinoxido-1,2,3,6-tetrahydrophosphine oxide (2) led to bisphosphine 3-2 with an inverted ring P atom. The reaction of bidentate P-ligand 3-2 with dichlorodibenzonitrilo platinum(II) yielded the mixture of a novel cis chelate complex (7 = PtCl₂(3-2)) and a cis bis(3-diphenylphosphino-1,2,3,6-tetrahydrophosphininyl) complex (8 = PtCl₂(η¹-5)₂) containing two units of monodentate P-ligand 5.     

From platina-β-diketones to diacetylplatinum(II) complexes - Synthesis, characterization and structural features

The reaction of the electronically unsaturated platina-β-diketone [Pt₂{(COMe)₂H}₂(μ-Cl)₂] (1a) with N^?N donors led to the formation of diacetyl(hydrido)platinum(IV) complexes [Pt(COMe)₂Cl(H)(N^?N)] (2). By the reaction of these complexes with NaOH in a two-phase system (H₂O/CH₂Cl₂) diacetylplatinum(II) complexes [Pt(COMe)₂(N^?N)] (N^?N = bpy, 4a; 4,4′-Me₂-bpy, 4b; 4,4′-t-Bu₂-bpy, 4c; 4,4′-Ph₂-bpy, 4d; 4,4′-t-Bu₂-6-n-Bu-bpy, 4e; bpym, 4f; bpyr, 4g; phen, 4h; 4-Me-phen, 4i; 5-Me-phen, 4j) were obtained. All complexes were characterized by microanalysis, IR and ¹H and ¹³C NMR spectroscopy. Additionally, complexes 4a, 4c, 4d and 4e were characterized by single-crystal X-ray diffraction analysis. The observed variety of packing patterns resulting from π-π stacking and hydrogen bonding is discussed.     

Synthesis and characterization of new paramagnetic tetraaryl derivatives of chromium and molybdenum

The low-temperature reaction of [CrCl₃(thf)₃] with LiC₆H₃Cl₂-2,6 yields the organochromium(III) compound [Li(thf)₄][Cr^III(C₆H₃Cl₂-2,6)₄] (1) in 48% yield. The homoleptic, anionic species [Cr^III(C₆H₃Cl₂-2,6)₄]⁻ is electrochemically related to the neutral one [Cr^IV(C₆H₃Cl₂-2,6)₄] (2) through a reversible one-electron exchange process (E_1/2 = 0.16 V, ΔE_p = 0.09 V, i_pa/i_pc = 1.18). Compound 2 was isolated in 74% yield by chemical oxidation of 1 with [N(C₆H₄Br-4)₃][SbCl₆]. Attempts to prepare the salt [NBu₄][Cr^III(C₆Cl₅)₄] (4) by direct arylation of [CrCl₃(thf)₃] with LiC₆Cl₅ in the presence of [NBu₄]Br gave the organochromium(II) salt [NBu₄]₂[Cr^II(C₆Cl₅)₄] (3) instead, as the result of a reduction process. The salt [NBu₄][Cr^III(C₆Cl₅)₄] (4) was cleanly prepared by comproportionation of 3 and [Cr^IV(C₆Cl₅)₄]. The reaction of [MoCl₄(dme)] with LiC₆Cl₅ in Et₂O solution proceeded with oxidation of the metal center to give the paramagnetic (S = 1/2), five-coordinate salt [Li(thf)₄][Mo^VO(C₆Cl₅)₄] (5). The crystal and molecular structures of 1 and 2 have been established by X-ray diffraction methods. The magnetic properties of 1 and 4 (S = 3/2) as well as those of 2 (S = 1) have been established by EPR spectroscopy as well as by ac and dc magnetization measurements.     

A pyrazolyl-terminated 2,2′:6′,2″-terpyridine ligand: Iron(II), ruthenium(II) and palladium(II) complexes of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine

The preparation of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine (2) under acidic conditions results in the formation of the salts [H₂2][MeOSO₃]₂ and [H₂2][EtOSO₃]₂, treatment of which with base leads to neutral 2. The structure of [H₂2][EtOSO₃]₂ · H₂O has been established by single crystal X-ray diffraction. The complexes [Fe(2)₂][PF₆]₂ and [Ru(2)₂][PF₆]₂ have been prepared and characterized, and the single crystal structure determination of [Ru(2)₂][PF₆]₂ is reported; [Fe(2)₂][PF₆]₂ is isostructural with [Ru(2)₂][PF₆]₂. Treatment of [Fe(2)₂]²⁺ with PdCl₂ produces [Pd(2)Cl]⁺, isolated and structurally characterized as the hexafluoridophosphate salt, illustrating that metal exchange within the tpy-binding domain occurs in preference to palladium(II) coordination by the N-donor atom of the pendant 3,5-dimethylpyrazol-1-yl unit in 2. [Pd(2)Cl]²⁺ can also be prepared from PdCl₂ and [H₂2][MeOSO₃]₂ in refluxing methanol.     

Preparation, characterization, and catalytic properties of ruthenium nitrosyl complexes with polypyrazolylmethane ligands

Ruthenium(II) nitrosyl complexes with polypyrazolylmethanes, [(Bpm)Ru(NO)Cl₃] [Bpm = bis(1-pyrazolyl)methane, 1], [(Bpm^∗)Ru(NO)Cl₃] [Bpm^∗ = bis(3,5-dimethyl-1-pyrazolyl)methane, 2], [(Tpm)Ru(NO)Cl₂][PF₆] [Tpm = tris(1-pyrazolyl)methane, 3], and [(Tpm^∗)Ru(NO)Cl₂][PF₆] [Tpm^∗ = tris(3,5-dimethyl-1-pyrazolyl)methane, 4], have been synthesized and characterized. The solid-state structures of [(Bpm^∗)Ru(NO)Cl₃] (2) and [(Tpm^∗)Ru(NO)Cl₂][PF₆] (4) were determined by single-crystal X-ray crystallographic analyses. These complexes have been tested as catalysts in the transfer hydrogenation of several ketones under mild conditions.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

Synthesis and characterization of perhalophenyltin derivatives. Study of their reactivity toward phosphine gold(I) chlorides

The (perhalophenyl)tin derivatives [SnR₄] (1-3) and [SnR₃Cl] (4-6) (R = C₆F₅, C₆F₃Cl₂, C₆Cl₅) were prepared from SnCl₄ and LiR or [SnR₄] in the appropriate molar ratio, while the dinuclear complexes [SnR₃]₂ (7-9) were obtained by treatment of [SnR₃Cl] with potassium under toluene reflux. Complexes 2, 6·0.5toluene and 7 were structurally characterized, the latter displaying a Sn-Sn bond of 2.808(7) Å, which indicates a strong tin-tin bond with covalent character in solid state. The hexaaryldistannanes 7-9 undergo transmetallation reactions with gold(I) derivatives, such as [AuCl(PPh₃)] or [(AuCl)₂(μ-dppm)], affording the neutral species [AuR(PPh₃)] (10-12) or [(AuR)₂(μ-dppm)] (13-15) or the ionic product [Au₃Cl₂(μ-dppm)₂][Sn(C₆F₅)₃Cl₂] (16). The crystal structures of 14·CH₂Cl₂, 15 and 16·2CH₂Cl₂ were determined by X-ray diffraction, the latter showing a Au₃ nearly equilateral triangular core in the cation with gold-gold contacts of 3.128(7) and 3.227(12) Å. The main difference between the molecular structures of 14·CH₂Cl₂ and 15 (both of them displaying intramolecular gold-gold contacts of 3.142(6) and 3.160(4) Å, respectively) is the presence of an intermolecular Au?Au interaction of 3.2126(8) Å in the case of the C₆F₃Cl₂ complex that gives rise to a tetranuclear unit.     

A flow chemistry route to 2-phenyl-3-(1H-pyrrol-2-yl)propan-1-amines

The Knoevenagel condensation of pyrrole-2-carboxaldehyde (1) with a range of substituted benzyl nitriles (2a-e) afforded rapid access to a family of α,β-unsaturated nitriles (3a-e) in good yields (67-78%). Flow hydrogenation (ThalesNano H-cube™) at 60 °C, 50 bar H₂ pressure, 1.0 mL/min through a 10% Pd-C catalyst selectively, and quantitatively, hydrogenated the olefin double bond (4a-e). Use of a Raney Nickel catalyst at 70 °C, 70 bar H₂ pressure and flow rates of 0.5-1.0 mL/min afforded quantitative conversion into the corresponding saturated amines with the reduction of both the olefin and nitrile bonds (5a-e). The versatility of this approach was further exemplified by reaction of 5a and 5c with norcantharidin to afford acid amide norcantharidin analogues 7 and 8 as novel protein phosphatase 1 and 2A inhibitors.     

Iron(III) mixed-ligand complexes: Synthesis,characterization and crystal structure determination of iron(III) hetero-ligand complexes containing 1,10-phenanthroline, 2,2′-bipyridine,chloride and dimethyl sulfoxide, [Fe(phen)Cl3(DMSO)] and [Fe(bipy)Cl3(DMSO)]

Treatment of [Fe(bipy)Cl₄][bipy · H] (1) and [Fe(phen)Cl₄][phen · H] (3) (where bipy is 2,2′-bipyridine and phen is 1,10-phenanthroline) with dimethyl sulfoxide in methanolic solution produced [Fe(bipy)Cl₃(DMSO)] (2) and [Fe(phen)Cl₃(DMSO)] (4) (where DMSO is dimethyl sulfoxide), respectively. The resulting complexes were characterized by elemental analysis, IR, UV–Vis and ¹H NMR spectroscopies and by the X-ray diffraction method. These complexes are high spin with a spin multiplicity of 6.     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

Synthesis and reactivity of ruthenium complexes with 1,1′-dithiolate ligands

Reactions of [Ru(PPh₃)₃Cl₂] with ROCS₂K in THF at room temperature and at reflux gave the kinetic products trans-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 1, ⁱPr 2) and the thermodynamic products cis-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 3, ⁱPr 4), respectively. Treatment of [RuHCl(CO)(PPh₃)₃] with ROCS₂K in THF afforded [RuH(CO)-(S₂COR)(PPh₃)₂] (R = ⁿPr 5, ⁱPr 6) as the sole isolable products. Reaction of [RuCl₂(PPh₃)₃] with tetramethylthiuram disulfide [Me₂NCS₂]₂ gave a Ru(III) dithiocarbamate complex, [Ru(PPh₃)₂(S₂CNMe₂)Cl₂] (7). This reaction involved oxidation of ruthenium(II) to ruthenium(III) by the disulfide group in [Me₂NCS₂]₂. Treatment of 7 with 1 equiv. of [M(MeCN)₄][ClO₄] (M = Cu, Ag) gave the stable cationic ruthenium(III)-alkyl complexes [Ru{C(NMe₂)QC(NMe₂)S}(S₂CNMe₂)(PPh₃)₂][ClO₄] (Q = O 8, S 9) with ruthenium-carbon bonds. The crystal structures of complexes 1, 2, 4·CH₂Cl₂, 6, 7·2CH₂Cl₂, 8, and 9·2CH₂Cl₂ have been determined by single-crystal X-ray diffraction. The ruthenium atom in each of the above complexes adopts a pseudo-octahedral geometry in an electron-rich sulfur coordination environment. The 1,1′-dithiolate ligands bind to ruthenium with bite S-Ru-S angles in the range of 70.14(4)-71.62(4)°. In 4·CH₂Cl₂, the P-Ru-P angle for the mutually cis PPh₃ ligands is 103.13(3)°, the P-Ru-P angles for other complexes with mutually trans PPh₃ ligands are in the range of 169.41(4)-180.00(6)°. The alkylcarbamate [C(NMe₂)QC(NMe₂)S]⁻ (Q = O, S) ligands in 8 and 9 are planar and bind to the ruthenium centers via the sulfur and carbon atoms from the CS and NC double bonds, respectively. The Ru-C bond lengths are 1.975(5) and 2.018(3) Å for 8 and 9·2CH₂Cl₂, respectively, which are typical for ruthenium(III)-alkyl complexes. Spectroscopic properties along with electrochemistry of all complexes are also reported in the paper.     

Preparation and cis-to-trans transformation study of square-planar [Pt(Ln)2Cl2] complexes bearing cytokinins derived from 6-benzylaminopurine (Ln) by view of NMR spectroscopy and X-ray crystallography

Mononuclear, square-planar platinum(II) complexes involving derivatives of aromatic cytokinins as the ligands, and having the general formula cis-[Pt(L_n)₂Cl₂] (1–3) and trans-[Pt(L_n)₂Cl₂] (4–6), where n = 1–3, L₁ = 2-chloro-6-(benzylamino)-9-isopropylpurine, L₂ = 2-chloro-6-[(4-methoxybenzyl)amino]-9-isopropylpurine and L₃ = 2-chloro-6-[(2-methoxybenzyl)-amino]-9-isopropylpurine, have been synthesized and characterized by elemental analysis, MALDI-TOF mass, FT IR, ¹H, ¹³C, ¹⁵N and ¹⁹⁵Pt NMR spectral measurements. Dynamic cis-to-trans isomerization process of complex 1 in N,N′-dimethylformamide (DMF) has been investigated by means of multinuclear NMR spectroscopy. The solid-state structures of 1, 4 · (DMF)₂, and 5 have been determined by single crystal X-ray analysis. X-ray structures revealed that the heterocyclic ligands are coordinated to platinum via nitrogen atom N(7) in all the complexes studied. In vitro cytotoxicity of the prepared complexes against MCF7, G361, K562, and HOS has been evaluated. Owing to low solubility of the complexes in water, the cytotoxicity has been only tested up to 5 μM concentration. Unfortunately, all complexes have been found to be non-cytotoxic in the accessible concentration range.     

Novel complexes of tris(aminomethyl)phosphanes with platinum(II): Structural, spectroscopic, DFT and biological activity studies

Two new platinum(II) complexes with tris(aminomethyl)phosphanes: [trans-PtCl₂{P(CH₂N(CH₂CH₂)₂NCH₃)₃}₂] (1Pt) and [trans-PtCl₂{P(CH₂N(CH₂CH₂)₂O)₃}₂] (2Pt) were prepared and characterized with NMR and UV-Vis spectroscopies. Their structures were investigated by X-ray crystallography and DFT methods. TDDFT calculations were employed to interpret the electronic spectra of the complexes. Obtained results are not unequivocal, however population analysis indicate, that the character of HOMO and HOMO−1 orbitals depend strongly on the electron donoring properties of the phosphane ligand. Biological activity of 2Pt complex, which is more stable and more soluble in polar solvents than 1Pt, was examined in vitro on the Vero cell line (IC₅₀ = 12.5 μM). At higher concentrations it induces apoptosis, probably due to changes of the cell cytoskeleton. Luminescence quenching studies and CD spectroscopy of interactions of 2Pt with HSA and BSA indicate that these albumins bind the complex slightly - without altering their tertiary structures, however HSA interacts with 2Pt noticeably stronger than BSA. It was also found that 2Pt does not cleave supercoiled pUC18 plasmid.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Half sandwich platinum group metal complexes containing tetradentate N-donor ligand bearing two pyrazolyl-pyridine units linked by an aromatic spacer

Reaction of the bis-bidentate ligand, 1,3-bis((3-(pyridin-2-yl)-1H-pyrazol-1-yl)methyl)benzene (NN∩NN), containing two chelating pyrazolyl-pyridine units connected by an aromatic spacer with platinum group metal complexes results in a series of cationic binuclear complexes, [(η⁶-arene)₂Ru₂(NN∩NN)Cl₂]²⁺ (arene = C₆H₆, 1; p-ⁱPrC₆H₄Me, 2; C₆Me₆, 3), [(η⁵-C₅Me₅)₂M₂(NN∩NN)Cl₂]²⁺ (M = Rh, 4; Ir, 5), [(η⁵-C₅H₅)₂M₂(NN∩NN)(PPh₃)₂]²⁺ (M = Ru, 6; Os, 7), [(η⁵-C₅Me₅)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (8) and [(η⁵-C₉H₇)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (9). All these complexes have been isolated as their hexafluorophosphate salts and fully characterized by use of a combination of NMR spectroscopy, IR spectroscopy and mass spectrometry. The solid state structures of three complexes, [2][PF₆]₂, [4][PF₆]₂ and [6][PF₆]₂, has been determined by X-ray crystallographic studies.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Synthesis and photochemistry of pH-sensitive GFP chromophore analogs

GFP chromophore analogs (7a-e, 8, and 10a,b) containing 2-thienyl-, 5-methyl-2-furyl-, 2-pyrryl, and 6-methyl-2-pyridyl-groups were synthesized and their fluorescence spectra recorded in the pH range 1-7. NMR studies showed that protonation of 8 (2-thienyl system) inhibited photoisomerization (Z-E) about the exocyclic double bond but that protonation of 7c (E + Z) (2-pyrryl system) gave only 7cE. Fluorescence studies revealed enhancement of fluorescence intensity of 7c and 7b,e (furyl system) below pH 2.5 and gave a similar result for 10a (pyridyl system) below pH 6. Quantum yields at pH 1 were low, probably due to excited state proton transfer (ESPT).