Selective stopped-flow sequential injection method for the spectrophotometric determination of titanium in dental implant and natural Moroccan phosphate rock

The present work reports the first sequential injection (SI) method for the spectrophotometric determination of Ti(IV). The method is based upon the reaction of Ti(IV) with chromotropic acid (CA) in acidic medium to form a water-soluble complex (λ_max = 420 nm). The chemical and instrumental variables of the system that affected the reaction were studied. Selectivity was greatly enhanced using ascorbic acid. A linear calibration graph was obtained in the range 0.2-10.0 mg l⁻¹ Ti(IV) at a sampling frequency of 24 h⁻¹. The precision was satisfactory (s_r = 1.5% at 5.0 mg l⁻¹ Ti(IV), n = 12) and the 3σ limit of detection, c_L, was 0.7 mg l⁻¹ (n = 10). The developed method proved to be adequately selective and was applied successfully to the analysis of real samples (dental implant and natural Moroccan phosphate rock) giving accurate results based on recovery studies (98-105%).     

Ring and cage compounds from complexes of group 13 metal halides with ethylenediamine: Experiment and theory

Formation of gaseous ring and cage compounds by thermolysis of the complexes between group 13 metal halides MX₃ and ethylenediamine (en) has been observed experimentally by mass spectrometry method (M = Al, Ga; X = Cl, Br, I) and studied theoretically. Existence of gaseous associates with molecular weight of 600-900 amu was observed for all studied systems. The abundance of the high molecular weight species decreases in order AlBr₃ > AlI₃ > GaCl₃ > GaBr₃. For aluminum compounds, formation of carbon-free cubane-type clusters was evidenced. Theoretical ab initio studies at B3LYP/LANL2DZ(d,p) level of theory have been performed for the series of the ring and cage oligomer compounds in Al₂Br₆-en system. A mechanistic pathway of the formation of inorganic rings and cages by subsequent HBr elimination and oligomerization reactions has been proposed. It is concluded that elimination reactions take place in the condensed phase.     

Efficient aldehyde olefination reactions catalyzed by an iron porphyrin complex in an ionic liquid

The commercially available complex Fe(TPP)Cl is an active and highly (E)-selective catalyst for the olefination of a variety of aldehydes in the presence of PPh₃ and diazoacetate in the ionic liquid (bmim)(PF₆). Dependent on the reactivity of the applied aldehyde, the reaction can be carried out at a reaction temperature of 50-80 °C. After 0.5-24 h quantitative olefin yields are reached with a broad variety of different aldehydes. Due to the application of an ionic liquid as reaction medium the products can be easily removed from the catalyst by a simple extraction and the catalyst is conveniently reusable without significant activity loss. Spectroscopic investigations indicate that the reaction mechanism includes the quantitative formation of a phosphorus ylide, which then reacts further in a Wittig reaction under formation of an olefin.     

The mechanism of ethylene polymerization by nickel salicylaldiminato catalysts - Agostic interactions and their kinetic isotope effects

The ethylene polymerization reaction of a neutral nickel catalyst was studied by DFT calculations at the Becke3LYP/6-31G(d) level of theory. As in related cases a β-agostic bond stabilizes the nickel alkyl ground states. Transition states for the insertion of the olefin show a distinct α-agostic interaction, which has not been observed for late metal polymerization catalysts before. An ethylene-alkyl complex was identified as the resting state of the reaction. The overall barrier height of the reaction amounts to 17.54 kcal/mol, which slightly increases to 17.60 kcal/mol for the polymerization of deuterated ethylene. Therefore, a small positive kinetic isotope effect (k_H/k_D = 1.09) can be calculated, which is caused by the α-agostic interaction in the transition state. A comparison to other late metal based polymerization systems reveals that the ethylene coordination step of highly active catalysts is significantly lower in energy compared to catalysts which are only moderately active.     

Theoretical studies on structures and spectroscopic properties of bis-cyclometalated iridium complexes [Ir(ppy)2X2]

The electronic structures and spectroscopic properties of a series of mixed bis-cyclometalated iridium(III) complexes [Ir(ppy)₂X₂]⁻ (X = CN, 1; X = NCS, 2; X = NCO, 3; ppy = 2-phenylpyridl) were investigated at the B3LYP/LANL2DZ and CIS/LANL2DZ levels. The calculated geometry parameters in the ground state are well consistent with the corresponding experimental values. The HOMO of 1 is dominantly localized on Ir atom and ppy ligand, but the HOMO of 2 and 3 have significant X ligand composition. Under the TD-DFT level with PCM model, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized geometries in the ground and excited states, respectively. The lowest-lying absorption of 1 at 403 nm is attributed to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)]→[π^∗(ppy)]} transition with metal-to-ligand and intraligand charge transfer (MLCT/ILCT) transition characters, whereas those of 2 (449 nm) and 3 (475 nm) are related to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)]→[π^∗(ppy)]} transition with MLCT/ILCT and ligand-to-ligand charge transfer (LLCT) transition characters. The phosphorescence of 1 at 466 nm can be described as originating from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)][π^∗(ppy)]} excited state, while those of 2 (487 nm) and 3 (516 nm) originate from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)][π^∗(ppy)]} excited states. The calculated results showed that the transition character of the absorption and emission can be changed by adjusting the π electron-accepting abilities of the X ligands and the phosphorescent color can be tuned by altering the X ligands.     

Modeling of the three-phase equilibrium in systems of the type water + nonionic surfactant + alkane

Liquid–liquid equilibria of systems water (A) + C_iE_j surfactant (B) + n-alkane (C) have been modeled by a mass-action law model previously developed and so far successfully applied to a series of binary water + C_iE_j systems and to the ternary system water + C₄E₁ + n-dodecane. These calculations provide the basis for the presented modeling. The aqueous systems give information about the association constants and the χ_AB-parameter of the Flory–Huggins theory and the ternary C₄E₁-system provides universal temperature functions for the χ_AC- and the χ_BC-parameter. The three-phase equilibrium for seven ternary C_iE_j systems (i = 6–12, j = 3–6) has been calculated by fitting one additional parameter for each of both temperature functions to the characteristic “fish-tail” point. The agreement with the experimental data is reasonably well. For systems with very small three-phase areas the results can considerably be improved by individual temperature functions that incorporate the experimental temperature maximum of the “fish” into the parameter fit. Based on the parameters of the system water + C₈E₄ + n-C₈H₁₈ the “fish-shaped” phase diagram of the system water + C₈E₄ + n-C₁₄H₃₀ was predicted reasonably well.     

Bis(pyrrolide-imine) Ti complexes with MAO: A new family of high performance catalysts for olefin polymerization

This contribution reports on the syntheses, structures and olefin polymerization behavior of Ti complexes having a pair of chelating pyrrolide-imine [N⁻,N] ligands. X-ray analyses as well as ¹H NMR studies demonstrate that bis(pyrrolide-imine) Ti complexes (named PI Catalysts) contain approximately octahedrally coordinated metal centers with mutually trans-pyrrolide-Ns, cis-imine-Ns and cis-Cls. DFT studies suggest that PI Catalysts, when activated, provide a metal alkyl in the cis position to a vacant coordination site for monomer binding. These theoretical studies also show that the active species derived from PI Catalysts normally possess higher electrophilicity and a sterically more open nature compared with those produced using bis(phenoxy-imine) Ti complexes (Ti-FI Catalysts) which are known as high performance olefin polymerization catalysts. These structural as well as electronic features suggest that PI Catalysts have high potential for the polymerization of olefinic monomers.Unlike high performance Ti-FI Catalysts, PI Catalysts do not require the presence of steric bulk in close proximity to the anionic donor. PI Catalysts combined with MAO display high ethylene polymerization activities (max. 33,200 kg-polymer/mol-cat/h, 25 °C, atmospheric pressure) comparable to those obtained with early group 4 metallocene catalysts (e.g., Cp₂TiCl₂ 16,700 kg-polymer/mol-cat/h) under identical conditions. As expected, PI Catalysts exhibit higher incorporation capability for propylene and 1-hexene relative to FI Catalysts though the incorporation levels are lower than those for Cp₂TiCl₂. To our surprise, PI Catalysts/MAO show remarkably high norbornene (NB) incorporation, superior to that seen with the [Me₂Si(Me₄Cp)N-tBu]TiCl₂ (CGC) catalyst system, and they readily form ethylene-NB copolymers with high NB contents. The highly electrophilic and sterically open nature is probably responsible for the high NB affinity. Additionally, PI Catalysts/MAO possess characteristics of living ethylene polymerization (though under limited conditions) and afford high molecular weight PEs with very narrow molecular weight distributions (M_n 225,000, M_w/M_n 1.15, 10-s polymerization, 25 °C). Moreover, these catalysts can copolymerize ethylene and NB in a highly controlled living manner to afford monodisperse alternating copolymers with very high molecular weights (M_n > 500,000, M_w/M_n < 1.2) at room temperature. This unique living nature allows the preparation of a number of ethylene- and NB-based block copolymers, including PE-b-poly(ethylene-co-NB) and poly(ethylene-co-NB)_a-b-poly(ethylene-co-NB)_b, in which each segment contains a different NB content. These are probably the first examples of the syntheses of block copolymers from ethylene and NB. Consequently, the discovery and application of PI Catalysts has exercised a significant influence on olefin polymerization catalysis and polymer synthesis.     

Chemical structure-stereospecificity relationship of internal donor in heterogeneous Ziegler-Natta catalyst for propylene polymerization by DFT and MM calculations

The effect of chemical structure of 2,2′-disubstituted 1,3-dimethoxypropane (so-called 1,3-diether) on the performance of Ziegler-Natta (ZN) catalyst was investigated by using density functional theory and molecular mechanics. Calculation of the energy barrier during insertion of propylene reveals that the isospecific active site created on the (1 0 0) surface of MgCl₂ is more active than the aspecific active site created on the (1 1 0) surface of MgCl₂ for propylene polymerization. When the adsorption energies of various 1,3-diethers are calculated and analyzed in terms of isotacticity, it is found that the isotacticity of polypropylene increases as 1,3-diether is adsorbed more preferentially on the (1 1 0) surface. Since analysis of energetics for insertion of propylene into the active site created on the (1 1 0) surface with 1,3-diether coordinated to Mg atom in the vicinity of the active site reveals that the coordination of 1,3-diether does not transform the aspecific active site on the (1 1 0) surface into isospecific one, it is concluded that the primary function of 1,3-diether is to prevent the formation of aspecific site on the (1 1 0) surface, without significant decrease in the number of the isospecific active site created on the (1 0 0) surface. A systematic analysis of various model compounds for 1,3-diether suggests that the substitution of highly branched hydrocarbon at the C₂ position of 1,3-diether results in better performance of ZN catalyst.     

The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Catalytic activity of η-(olefin)palladium(0) complexes with iminophosphine ligands in the Suzuki-Miyaura reaction. Role of the olefin in the catalyst stabilization

The catalytic activity of η²-(olefin)palladium(0)(iminophosphine) complexes in the Suzuki-Miyaura coupling is strongly dependent on the reaction conditions and on the nature of the ligands. The reaction is at the best carried out in aromatic solvents in the presence of K₂CO₃ at 90-110 °C. Higher reaction rates are obtained when the R substituent on the N-imino group is an aromatic group of low steric hindrance and the olefin is a moderate π-accepting ligand such as dimethyl fumarate. At temperatures lower than 90 °C, a self-catalyzed process leading to catalyst deactivation becomes predominant. Preliminary mechanistic investigations indicate that the oxidative addition of the aryl bromide to a Pd(0) species is the rate determining step in the catalytic cycle and that the olefin plays a key role in catalyst stabilization. Systems in situ prepared by mixing Pd(OAc)₂ or Pd(dba)₂ with 1 equiv of iminophosphine appear substantially less active than the preformed catalysts.     

Synthesis and properties of titanomagnetite (Fe3−xTixO4) nanoparticles: A tunable solid-state Fe(II/III) redox system

Titanomagnetite (Fe_3−xTi_xO₄) nanoparticles were synthesized by room temperature aqueous precipitation, in which Ti(IV) replaces Fe(III) and is charge compensated by conversion of Fe(III) to Fe(II) in the unit cell. A comprehensive suite of tools was used to probe composition, structure, and magnetic properties down to site-occupancy level, emphasizing distribution and accessibility of Fe(II) as a function of x. Synthesis of nanoparticles in the range 0 ? x ? 0.6 was attempted; Ti, total Fe and Fe(II) content were verified by chemical analysis. TEM indicated homogeneous spherical 9-12 nm particles. μ-XRD and Mössbauer spectroscopy on anoxic aqueous suspensions verified the inverse spinel structure and Ti(IV) incorporation in the unit cell up to x ? 0.38, based on Fe(II)/Fe(III) ratio deduced from the unit cell edge and Mössbauer spectra. Nanoparticles with a higher value of x possessed a minor amorphous secondary Fe(II)/Ti(IV) phase. XANES/EXAFS indicated Ti(IV) incorporation in the octahedral sublattice (B-site) and proportional increases in Fe(II)/Fe(III) ratio. XA/XMCD indicated that increases arise from increasing B-site Fe(II), and that these charge-balancing equivalents segregate to those B-sites near particle surfaces. Dissolution studies showed that this segregation persists after release of Fe(II) into solution, in amounts systematically proportional to x and thus the Fe(II)/Fe(III) ratio. A mechanistic reaction model was developed entailing mobile B-site Fe(II) supplying a highly interactive surface phase that undergoes interfacial electron transfer with oxidants in solution, sustained by outward Fe(II) migration from particle interiors and concurrent inward migration of charge-balancing cationic vacancies in a ratio of 3:1.     

A many-body theory of the Ti M2,3-VV Auger-photoelectron coincidence spectroscopy (APECS) spectrum of TiO2(1 1 0)

We calculated the Ti M_2,3-VV Auger-photoelectron coincidence spectroscopy spectrum of TiO₂(1 1 0) by a many-body theory. The spectral main line is governed by the DOS of the two O 2p holes living longer than the Ti ∣cd²L²〉 → ∣L²〉 super Coster-Kronig (sCK) decay. The two O 2p holes are created by the charge transfer core-hole screening at the Ti atomic site. Here c and L are the Ti 3p hole and the ligand O 2p hole, respectively. Analysis of the spectrum shows that the two (or three) CT O 2p holes in the π bonding states are localized, whereas those in the σ bonding states are delocalized. The three localized CT O 2p (π) holes in ∣cd³L³〉 in Ti M_2,3 main line (or satellite) of TiO₂(1 1 0) live longer than the Ti ∣cd³L³〉 → ∣d¹L³〉 sCK decay so that the Coulomb repulsion from the surrounding Ti ions gives the O⁺ ion desorption from the surface.     

Vanadiumoxo–aroylhydrazone complexes: Synthesis,structure and DFT calculations

The aroylhydrazone Schiff base ligands (E)-N’-(2-hydroxybenzylidene)benzohydrazide = H₂L¹, (E)-N’-(2-hydroxy-3-methoxybenzylidene)benzohydrazide = H₂L² and = (E)-N’-(5-bromo-2-hydroxybenzylidene)benzohydrazide = H₂L³ gave the vanadium(V)oxo-aroylhydrazone complexes [V^VOL¹(OCH₃)(OHCH₃] (1), [V^VOL²(OCH₃)(OHCH₃]·CH₃OH (2) and [V^VOL³(OCH₃)(OHCH₃] (3) on reaction with vanadium(IV) oxide acetylacetonate. The complexes were characterized by spectroscopic methods in the solid state (IR) and in solution (UV–Vis, ¹H NMR). Single crystal X-ray analysis was performed with 3. In methanol solution six-coordinated V^VOL³(OCH₃)(OHCH₃) was formed. V^IV was oxidized to V^v by aerial oxygen in the synthesis. In the VO₅N coordination sphere the alcohol oxygen lies trans to the oxo oxygen. The general V–O bond length order is oxo < methoxylato < phenoxidic < enolato < alcoholic. The complexes are mononuclear, but intermolecular O–H?N hydrogen bonding affords a zigzag chain. DFT calculations on complex 3 reproduced the geometric parameters, IR and UV–Vis spectroscopic data well in a reasonable range.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Kinetic investigation of a PC(sp)P pincer palladium (II) complex in the Heck reaction

An investigation of the kinetics of the Heck reaction between 4-iodoanisole and styrene catalysed by {cis-1,3-bis[(di-tert-butylphosphino)methyl]-cyclohexane} palladium (II) iodide (1) has been performed in DMF-d₇ solution. Based on mercury poisoning experiments a heterogeneous palladium catalyst formed from the pre-catalyst is proposed. Saturation behaviour with respect to the olefin concentration suggests a mechanism consisting of a pre-equilibrium association of the olefin followed by a rate determining reaction with aryl halide. The equilibrium constant for the olefin association, K₁, and the rate constant for the subsequent oxidative addition step, k₂, were determined to (5.7 ± 2.5) × 10⁻³ and 18.4 ± 2.7 M⁻¹ s⁻¹, respectively.     

Catalytic dehydrogenation of cyclooctane with titanium, zirconium and hafnium metallocene complexes

Metallocene complexes in combination with cocatalysts like methylalumoxane (MAO) are not only excellent catalysts for olefin polymerization but also appropriate catalysts for the activation of alkanes in homogeneous (autoclave) and heterogeneous (fixed bed reactor) reactions. The activities of the catalysts depend on the temperature, the cocatalysts, additives, the central metal and the ligand structure. Generally, complexes with low steric demands and MAO as cocatalyst gave the highest activities. The comparison of different π-ligands resulted in the following activity order: cyclopentadienyl > indenyl > fluorenyl. The influence of σ-ligands and n-donor ligands gave the following activity order: -Cl > -PMe₃ > -CH₂Ph > -(CH₂)₄CH₃ > -NPh₃. The activities depended on the nature of the cocatalyst and decreased in the following order: MAO ? AlMe₃ > AlEt₃. The addition of aluminum powder and the Lewis base NPh₃ increased the activity of the Cp₂ZrCl₂/MAO catalyst. The Cp₂ZrCl₂/MAO/NPh₃ catalyst showed the highest activity in homogeneous reactions with 458 turnovers in 16 h at 300 °C. The Cp₂ZrCl₂/MAO/NPh₃/SI1102 catalyst gave the highest activity in heterogeneous catalysis with 206 turnovers in 5 h at 350 °C. None of the catalysts required a hydrogen acceptor like an external olefin.     

Sulfonylcalix[4]arenetetrasulfonate as pre-column chelating reagent for selective determination of aluminum(III), iron(III), and titanium(IV) by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection

Sulfonylcalix[4]arenetetrasulfonate (SO₂CAS) has been examined as a pre-column chelating reagent for ultratrace determination of metal ions by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection. Metal ions were converted into the SO₂CAS chelates in an acetic buffer solution (pH 4.7). The chelates were injected onto a n-octadecylsilanized silica-type Chromolith™ Performance RP-18e column and were eluted using a methanol (50 wt.%)-water eluent (pH 5.6) containing tetra-n-butylammonium bromide (7.0 mmol kg⁻¹), acetate buffer (5.0 mmol kg⁻¹), and disodium ethylendiamine-N,N,N′,N′-tetraacetate (0.10 mmol kg⁻¹). Under the conditions used, Al(III), Fe(III), and Ti(IV) were selectively detected among 21 kinds of metal ions [Al(III), Ba(II), Be(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hf(IV), In(III), Mg(II), Mn(II), Mo(VI), Ni(II), Pb(II), Ti(IV), V(V), Zn(II), and Zr(IV)]. The detection limits on a 3σ blank basis were 8.8 nmol dm⁻³ (0.24 ng cm⁻³) for Al(III), 7.6 nmol dm⁻³ (0.42 ng cm⁻³) for Fe(III), and 17 nmol dm⁻³ (0.80 ng cm⁻³) for Ti(IV). The practical applicability of the proposed method was checked using river and tap water samples.     

Catalytic effects of sulfates on thermal degradation of waste poly(methyl methacrylate)

The thermal degradation of waste poly(methyl methacrylate) (PMMA) in the presence of ferric sulfate, cupric sulfate, aluminum sulfate, magnesium sulfate, and barium sulfate was studied by using thermogravimetric analysis (TGA) in air atmosphere. The values of apparent activation energies (E_a) calculated by Flynn-Wall-Ozawa method were found to be in the order of PMMA + Fe₂(SO₄)₃ < PMMA + Al₂(SO₄)₃ < PMMA + MgSO₄ < PMMA + CuSO₄ < PMMA + BaSO₄ < PMMA. The mechanism of catalytic degradation of PMMA in presence of the sulfates was discussed and the results showed that the catalytic effects of sulfates have a relationship with the acidity of their respective metal ions.     

YBa2Cu3O7 electro-magnetic optic effects in Ba L2,3 X-ray absorption near Tc

The onset of electro-magnetic optic effects, observed at the Ba L_2,3 edges synchrotron X-ray absorption by a YBa₂Cu₃O₇ single crystal, 20 K above the transition temperature to superconductivity, T_c ∼ 92 K is used to identify the role played by the Ba donor layer in the transition to superconductivity in the CuO₂ layers. Negative permeability leads to Faraday rotation of the transmitted beam below T = 112 to 56 K for the 22 μm thick single crystal (c-axis orientation of 8π/18 relative to ε_X-rays) and sharp changes in the density of empty final states lead to zero transmitted radiation in an interval ΔE at the given orientation. The temperature dependence: ΔE(L₂) = 1.4, 3.5 and 3.9 eV, while ΔE(L₃) = 5.3, 6 and 7 eV at T = 92, 74 and 63 K, respectively, indicates that the width of the empty final states bands increases as T decreases. ΔE(L₃)/ΔE(L₂) = 3.8 at 92 K to 1.8 at 63 K also indicates that the d_5/2 symmetry bands fill faster than those of d_3/2 symmetry below T_c, providing the first experimental evidence of unpaired spin-orbit states in the Ba donor layer of a superconductor. These effects, characteristic of ferromagnetic and anti-ferromagnetic materials near a resonance absorption, signal the onset of a Mott transition. The interaction between the layer states is described using 1D conjugate molecular orbitals.     

Oxidative condensation and chemiluminescence of 5-amino-2,3-dihydro-1,4-phtalazinedione

The oxidative condensation of (5-amino-2,3-dihydro-1,4-phtalazinedione) luminol was carried out under their oxidation by (NH₄)₂S₂O₈ and KIO₃ in the mixed water-organic (namely dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidinone (MPD)) solvent under the volume ratio 1:9. The structure of the products was studied by IR and Raman spectroscopy, elemental analysis and the derivatographic method. It was determined that oxidation by KIO₃ (E = 1.085 V) occurs on the amide nitrogen atoms, while in the case of (NH₄)₂S₂O₈ (E = 2.05 V) it occurs on the amino-group. The structure and thermal stability of the obtained products is determined by the nature of the oxidant. The active decomposition of luminol begins at t_d = 334.5 °C, while for the specimens of the polyluminols, which were synthesized in the water-DMSO and water-MPD mixtures, t_d equals 356.7 and 409.1 °C respectively. The worst thermal stability has products of luminol oxidation by KIO₃ (t_d = 282.5 °C). The mechanism of the luminol oxidative polymerization by (NH₄)₂S₂O₈ and KIO₃ has been proposed.