Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Synthesis and properties of pyrazine-pillared Ag3Mo2O4F7 and AgReO4 layered phases

The new pyrazine-pillared solids, AgReO₄(C₄H₄N₂) (I) and Ag₃Mo₂O₄F₇(C₄H₄N₂)₃ (C₄H₄N₂=pyrazine, pyz) (II), were synthesized by hydrothermal methods at 150 °C and characterized using single crystal X-ray diffraction (I—P2₁/c, No. 14, Z=4, a=7.2238(6) Å, b=7.4940(7) Å, c=15.451(1) Å, β=92.296(4)°; II—P2/n, No. 13, Z=2, a=7.6465(9) Å, b=7.1888(5) Å, c=19.142(2) Å, β=100.284(8)°), thermogravimetric analysis, UV-Vis diffuse reflectance, and photoluminescence measurements. Individual Ag(pyz) chains in I are bonded to three perrhenate ReO₄^- tetrahedra per layer, while each layer in II contains sets of three edge-shared Ag(pyz) chains (π-π stacked) that are edge-shared to four Mo₂O₄F₇^3- dimers. A relatively small interlayer spacing results from the short length of the pyrazine pillars, and which can be removed at just slightly above their preparation temperature, at >150-175 °C, to produce crystalline AgReO₄ for I, and Ag₂MoO₄ and an unidentified product for II. Both pillared solids exhibit strong orange-yellow photoemission, at 575 nm for I and 560 nm for II, arising from electronic excitations across (charge transfer) band gaps of 2.91 and 2.76 eV in each, respectively. Their structures and properties are analyzed with respect to parent ‘organic free’ silver perrhenate and molybdate solids which manifest similar photoemissions, as well as to the calculated electronic band structures.     

Synthesis and molecular structures of lanthanocene amide complexes and their catalytic activity for addition of amines to nitriles

Reaction of (CH₃C₅H₄)₂LnCl(THF) with NaNHAr in a 1:1 molar ratio in THF afforded the amide complexes (CH₃C₅H₄)₂LnNHAr(THF) [(Ar = 2,6-Me₂C₆H_3, Ln = Yb (I), Y (III); Ar = 2,6-ⁱPr₂C₆H₃, Ln = Yb (II)]. X-ray crystal structure determination revealed that complexes I-III are isostructural. The central metal in each complex coordinated to two methylcyclopentadienyl groups, one amide group and one oxygen atom from THF to form a distorted tetrahedron. Complexes I-III and a known complex (CH₃C₅H₄)₂YbNⁱPr₂(THF) IV all can serve as the catalysts for addition of amines to nitriles to monosubstituted N-arylamidines. The activity depended on the central metals and amide groups, and the active sequence follows the trend IV ≈ III < I < II.     

Hydrothermal syntheses, crystal structures and properties of 0-D, 1-D and 2-D organic-inorganic hybrid borotungstates constructed from Keggin-type heteropolyanion [α-BW12O40] and transition-metal complexes

Three novel organic-inorganic hybrid borotungstates {[Ni(phen)₂(H₂O)]₂H(α-BW₁₂O₄₀)}·4H₂O (1), [Cu^I(2,2'-bipy)(4,4′-bipy)_0.5]₂{[Cu^I(2,2′-bipy)]₂Cu^I(4,4′-bipy)₂(α-BW₁₂O₄₀)} (2) and {[Cu^I(4,4′-bipy)]₃H₂(α-BW₁₂O₄₀)}·3.5H₂O (3) (phen=1,10-phenanthroline, 2,2′-bipy=2,2′-bipyridine, 4,4′-bipy=4,4′-bipyridine) have been hydrothermally synthesized and structurally characterized by elemental analyses, IR, UV spectra, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), single-crystal X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and photoluminescence. The structural analysis reveals that 1 consists of a 0-D bisupporting polyoxometalate cluster where two [Ni(phen)₂(H₂O)]²⁺ cations are grafted on the polyoxoanion [α-BW₁₂O₄₀]^5- through two terminal oxygen atoms, 2 shows a 1-D infinite chain constructed from [α-BW₁₂O₄₀]^5- polyoxoanions and {[Cu^I(2,2′-bipy)]₂Cu^I(4,4′-bipy)₂}³⁺ cations by means of alternating fashion, and 3 displays an unprecedented 2D extended structure built by [α-BW₁₂O₄₀]^5- polyoxoanions and -Cu^I-4,4′-bipy- linear chains, in which each [α-BW₁₂O₄₀]^5- polyoxoanion acts as a tetradentate inorganic ligand and provides three terminal oxygen atom and one two-bridging oxygen atom. The presence of Ni^II and W^VI in 1, Cu^I ions and W^VI in 2 and 3 are identified by XPS spectra. The photoluminescence of 2 and 3 are also investigated.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Heterometallic cyanide-bridged complexes containing RhRuRh triad: NMR data on exchange reactions and ligand effect transmission

Trans-[RuPy₄(CN)₂ cleaves chloro-rhodium bridges in rhodium(I) binuclear complexes, [Rh(CO)₂Cl]₂, [Rh(Cod)Cl]₂, and [(Cod)RhCl₂Rh(CO)₂] yielding heterometallic triad complexes, [(CO)₂ClRh(NC)RuPy₄(CN)RhCl(CO)₂] (I), [(Cod)ClRh(NC)RuPy₄(CN)RhCl(Cod)] (II), and [(Cod)ClRh(NC)RuPy₄(CN)RhCl(CO)₂] (III), respectively. In solutions, III coexists with equilibrium amounts of I and II in the near-binomial proportions. Under action of [Rh(CO)₂Cl]₂, II transforms into I with parallel formation of [Rh(Cod)Cl]₂. Ligand effect transmission along the L-Rh-NC-Ru-CN-Rh-L′ chain is studied by ¹H and ¹³C NMR. Chemical shifts δ¹H and δ¹³C of Ru-bound Py ligands are sensitive to the nature of Rh-bound ligands. Values of δ¹H and δ¹³C of Cod and ¹³C of CO ligands are sensitive to the ligands at the remote end of the L-Rh-NC-Ru-CN-Rh-L′ chain. Reaction of trans-[RuPy₄(CN)₂] with Rh₂(OAc)₄ yields an apparently linear polymer [-Rh(OAc)₄Rh-NCRuPy₄CN-]. Upon action of [Rh(CO)₂Cl]₂, the polymer decomposes yielding I and Rh₂(OAc)₄. X-ray structure data for I are given.     

Synthesis and characterization of Ru/Au,Pd/Au,Pd/2Au,Pt/2Au and Cu/2Au heterometallic complexes of cyclodiphosphazane cis-{(o-MeOC6H4O)P(μ-NBu)}2

Mononuclear complexes of cyclodiphosphazane with an uncoordinated phosphorus centre [RuCl₂(η⁶-cymene){l-κP}] (1a) (L = cis-{(o-MeOC₆H₄O)P(μ-N^tBu)}₂) and [PdCl₂(PEt₃){l-κP}] (1b) react with 1 equiv. of [AuCl(SMe₂)] to afford Ru^II/Au^I and Pd^II/Au^I heterodinuclear complexes [RuCl₂(η⁶-cymene){μ-l-κP,κP}AuCl] (2) and [PdCl₂(PEt₃){μ-l-κP,κP}AuCl] (3), respectively. Heterotrinuclear complexes [PdCl₂{μ-l-κP,κP}₂(AuCl)₂] (4), [PtCl₂{μ-l-κP,κP}₂(AuCl)₂] (5) and [CuI{μ-l-κP,κP}₂(AuCl)₂] (6) containing Pd^II/2Au^I, Pt^II/2Au^I and Cu^I/2Au^I metal centers have been synthesized from the reactions of trans-[PdCl₂{l-κP}₂] (1c), cis-[PtCl₂{l-κP}₂] (1d) and [CuI{{l-κP}₂] (1f) respectively, with 2 equiv. of [AuCl(SMe₂)]. Molecular structures of complexes 2, 3 and 4 were established by single crystal X-ray diffraction studies.     

Syntheses, electrochemical and spectroelectrochemical properties of novel ball-type and mononuclear Co(II) phthalocyanines substituted at the peripheral and non-peripheral positions with binaphthol groups

Mononuclear cobalt phthalocyanine (CoPc) substituted at the non-peripheral 8 and peripheral positions 9 with 1,1′-binaphthyl-8,8′-diol and ball-type dinuclear Co₂Pc₂ substituted at the non-peripheral 10 and peripheral 11 positions with the same substituent are reported. The complexes with 1,1′-binaphthol-bridges were prepared from the corresponding phthalonitriles 4-7. The effects of the position of substituent on spectral, electrochemical and spectroelectrochemical properties of these complexes were also explored. The mononuclear complexes 8 and 9 exhibited one metal reduction, one ring reduction and one ring oxidation. The redox properties of the ball-type complexes 10 and 11 exhibited two reduction processes assigned to [(Co^IPc⁻²)₂]²⁻/[(Co^IPc⁻³)₂]⁴⁻ (I), (Co^IIPc⁻²)₂/[(Co^IPc⁻²)₂]²⁻ (II) and one oxidation process assigned to [(Co^IIIPc⁻²)₂]²⁺/Co^IIPc⁻²)₂ (III). The ball-type complexes are much easier to oxidize and more difficult to reduce than the corresponding monomers 8 and 9.     

New mercury(II) and silver(I) complexes containing NHC metallacrown ethers with the π-π stacking interactions

The oligoether-linked bis-benzimidazolium salt 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]iodide (H₂L¹ · I₂), 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-ethyl)benzimidazolium-1-yl]iodide (H₂L² · I₂) and 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]hexafluorophosphate (H₂L¹ · (PF₆)₂) and their three new mercury(II) and silver(I) complexes containing NHC metallacrown ethers, HgL¹ · (Hg₂ · I₆) (1), HgL² · I₂ (2) and AgL¹ · PF₆ (3) were prepared and characterized. In the packing diagrams of H₂L² · I₂, 1, 2 and 3 benzimidazole ring head-to-tail π-π stacking interactions are observed.     

Synthesis,structural analysis,and thermal and spectroscopic studies of methylmalonate-containing zinc(II) complexes

The synthesis, crystal structure, thermal analysis and spectroscopic studies of five zinc(II) complexes of formulae [Zn(Memal)(H₂O)]_n (1) and [Zn₂(L)(Memal)₂(H₂O)₂]_n (2-5) [H₂Memal = methylmalonic acid, and L = 4,4′-bipyridine (4,4′-bpy) (2), 1,2-bis(4-pyridyl)ethylene (bpe) (3), 1,2-bis(4-pyridyl)ethane (bpa) (4) and 4,4′-azobispyridine (azpy) (5)] are presented here. The crystal structure of 1 is a three-dimensional arrangement of zinc(II) cations interconnected by methylmalonate groups adopting the μ₃-κ²O:κO’:κO”:κO”’ coordination mode to afford a rare (10,3)-d utp-network. The structures of the compounds 2-5 are also three-dimensional and they consist of corrugated square layers of methylmalonate-bridged zinc(II) ions which are pillared by bis-monodentate 4,4′-bpy (2), bpe (3), bpa (4) and azpy (5) ligands. The Memal ligand in 2-5 adopts the μ₃-κO:κO′:κO′′:κO′′′ coordination mode. Each zinc(II) ion in 1-5 is six-coordinated with five (1)/four (2-5) methylmalonate-oxygen atoms, a water molecule (1-5) and a nitrogen atom from a L ligand (2-5) building distorted octahedral environments. The rod-like L co-ligands in 2-5 appear as useful tools to control the interlayer metal-metal separation, which covers the range 8.4311(5) Å (2) – 9.644(3) Å (5). The influence of the co-ligand on the fluorescence properties of this series of compounds has been analyzed and discussed by steady-state and time resolved spectroscopy on all five compounds in the solid state.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Four new ginkgolic acids from Ginkgo biloba

Four new compounds, 2-hydroxy-6-(12′-hydroxyheptadec-13′(E)-en-1-yl)benzoic acid (1), 2-hydroxy-6-(13′-hydroxyheptadec-11′(E)-en-1-yl)benzoic acid (2), 2-hydroxy-6-(10′-hydroxypentadec-11′(E)-en-1-yl)benzoic acid (3), and 2-hydroxy-6-(11′-hydroxypentadec-9′(E)-en-1-yl)benzoic acid (4) were isolated from the leaves of Ginkgo biloba and the structures of new ginkgolic acids were deduced on the basis of spectroscopic methods and chemical means. Compounds 1 and 2, and 3 and 4 examined as an inseparable mixture of hydroxyl and double bond positional isomers, were ultimately defined by total synthesis. Compounds 1–4 showed moderate lipid droplets accumulation inhibitory activity on mouse pre-adipocyte cell line, MC3T3-G2/PA6.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.