Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Reaction of 1,2-dibromoethane with primary amines: formation of N,N′-disubstituted ethylenediamines RNH-CH2CH2-NHR and homologous polyamines RNH-[CH2CH2NR]n-H

The reaction of primary amines RNH₂ (R: Me, Et, iPr, tBu and Ph) with 1,2-dibromoethane gave N,N′-disubstituted ethylenediamines R-NH-CH₂CH₂-NH-R (1) in yields ranging from 10% (1a; R=Me) to 70% (1d, R=tBu; 1e, R=Ph). Piperazines and N-substituted polyethyleneimines were identified (¹H NMR, ¹³C NMR and EI-MS) as side products of the reaction and isolated by fractional distillation. The piperazines 2 are formed in yields of 3-10% and can be separated from the diamines 1 in all cases, except for R=Me and Ph. The polyamine homologues RNH-[CH₂CH₂NR]_n-H (3-5) were isolated in yields ranging from 0.1% (n=4, R=iPr) to 14% (n=2, R=iPr). The yields of 1 increase with the size of the substituent R, no obvious trend exists for the yields of the side products.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Synthesis and crystal structures of organometallic compounds containing the ligands C(SiMe3)2(SiMe2H) and C(SiMe2Ph)2(SiMe2H)

Metallation of (HMe₂Si)(Me₃Si)₂CH (1) by LiMe gave the organolithium compound Li(THF)₂C(SiMe₃)₂(SiMe₂H) (2a), which exists in toluene solution as a mixture of covalent species and ion pairs [Li(THF)₄][Li{C(SiMe₃)₂(SiMe₂H)}₂] (2b). Treatment of a mixture of 1 and LiMe with KOBu^t gave KC(SiMe₃)₂(SiMe₂H) (3). This reacted with AlMe₂Cl in hexane/THF to give Al(THF)Me₂{C(SiMe₃)₂(Si Me₂H)} (4). Treatment of (HMe₂Si)(PhMe₂Si)₂CH (5) with LiMe in Et₂O/THF gave the THF adduct [Li(THF)₂C(SiMe₂Ph)₂(SiMe₂H)] (6); in the presence of KOBu^t the solvent-free [K][C(SiMe₂Ph)₂(SiMe₂H)] (7) was obtained. Crystal structure determinations showed that 6 crystallizes in a molecular lattice and 7 in an ionic lattice in which the coordination sphere of the potassium comprises phenyl groups and hydrogen atoms attached to silicon, as well as the central carbon of the bulky carbanion. Compound 7 reacted with an excess of AlMe₂Cl to give [AlClMe{C(SiMe₂Ph)₂(SiMe₂H)}]₂ (8) and AlMe₃. A small amount of the methoxo derivative [Al(OMe)Me{C(SiMe₂Ph)₂(SiMe₂H)}]₂ (9) was obtained as a byproduct, presumably after the accidental admission of traces of air. X-ray structural determinations showed that 8 forms halogen-bridged dimers, with the bulky ligands in the anti-configuration, and 9 forms methoxo-bridged species in which the bulky ligands are syn.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].     

New synthetic route to polyphosphine ligands bearing 1,2,4,5-tetrakis(phosphino)benzene framework: structural characterizations of 1,4-(PPh2)2-2,5-(PR2)2-C6F2 (R = Ph, Pr, Et)

Reactions of 1,4-dibromo-2,5-difluorobenzene with two equivalents of lithium diisopropylamide at low temperature (T < −90 °C) followed by a quench with a slight excess of ClPPh₂ afford 1,4-dibromo-2,5-bis(diphenylphosphino)-3,6-difluorobenzene (1) in good yields. Reacting 1 with two equivalents of BuLi followed by a quench with a slight excess of ClPR₂ yield novel 1,2,4,5-tetrakis(phosphino)-3,6-difluorobenzenes 1,4-(PPh₂)₂-2,5-(PR₂)₂-C₆F₂ (R = Ph (2a); R = ⁱPr (2b); R = Et (2c)) in moderate yields. Compounds 1 and 2a-c were characterized by multinuclear NMR spectroscopy and elemental analyses. In addition, molecular structures of 2a-c have been determined by single crystal X-ray crystallography. Phosphorus atoms of PPh₂/PR₂ substituents in 2a-c are displaced from the plane of the central phenyl ring due to steric interactions with neighboring groups.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Cyclopentadienyl tungsten complexes with thiocarboxylate and thiosulfonate ligands: Structures of CpW(CO)3SCOPh and CpW(CO)3SSO2-4-C6H4Cl

Treatment of the hydrosulfido tungsten complex CpW(CO)₃SH with acid chlorides (RCOCl) or sulfonyl chlorides (RSO₂Cl) affords CpW(CO)₃SCOR (1) [R = Me (a), CH₂Cl (b), Ph (c), 4-C₆H₄NO₂ (d)] and CpW(CO)₃SSO₂R (2) [R = Me (a), Ph (b), 4-C₆H₄Cl (c), 4-C₆H₄NO₂ (d)], respectively. The novel complexes, 1 and 2, were fully characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of CpW(CO)₃SCOPh (1c) and CpW(CO)₃SSO₂-4-C₆H₄Cl (2c) were determined by an X-ray crystal structure analysis.     

Synthesis and characterisation of [AlMen{Si(SiMe3)3}3−n(thf)] (n = 1 or 2)

The crystalline compounds [AlMe_n{Si(SiMe₃)₃}_3−n(thf)] [n = 2 (1) or 1 (2)] were prepared from the lithium sisyl [Li{Si(SiMe₃)₃}(thf)₃] (A) and the appropriate methylaluminium chloride [AlCl_3−nMe_n] in thf. The X-ray structure of 1 is reported. Unlike A or a magnesium sisyl [Mg{Si(SiMe₃)₃}₂(thf)₂] (B), neither 1 nor 2 underwent an insertion reaction with an α-H-free nitrile.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.